坯料加工材料 的英文怎麼說

中文拼音 [pīliàojiāgōngcáiliào]
坯料加工材料 英文
o machining materials in blanks
  • 坯 : 名詞1 （未經燒制的磚、瓦、瓷等的製品） base 2 （土坯） unburnt brick; earthen brick; adobe 3 [方...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 工 : Ⅰ名詞1 （工人和工人階級） worker; workman; the working class 2 （工作; 生產勞動） work; labour 3 ...
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  1. As an advanced materials preparation technology, spray - deposition has shown remarkable superiority in producing large - sized alloys and metal matrix composites. however, the spray deposeted preforms usually contain a certain quantity of porosity. besides, the oxide films on the surface of the particles lead to week metallurgic conjunction between the particles. in order to obtain an ideal structure and performance, the porous preforms need further densifying and plastical forming. in this paper, a new technology named wedge pressing was used to densify spray - deposeted 5a06 aluminium alloy, in which the large deformation can be obtained through the sum - up of local deformation and multi - step small deformation. this method can also solved the problems in traditional processing and greatly decreased the producing cost. what ’ s more, the reserch on the wedge pressing desification rules about the large - sized spray deposeted preforms was significant it was vital not only to the further densification of the prefoums but also to the further research on plastical deforming the research was also benefit to the industrialization an the application of the spray deposeted porous materials

    坩堝移動式噴射沉積技術作為一種先進的材料制備新技術，在制備大尺寸合金及金屬基復合材料方面具有顯著的優越性。然而噴射沉積坯件特別是大型坯件通常存在一定量的孔隙，顆粒表面存在一定量的氧化膜，顆粒之間未能完全達到良好的冶金結合狀態，因此需要進行后續緻密化和塑性變形才能獲得理想的組織和性能。本文採用一種新型的楔形壓制工藝，即通過局部變形、多道次小變形累積實現大變形的緻密化加工方法，對噴射沉積多孔坯料進行后續緻密化和塑性變形，很好地解決了傳統加工工藝的難題，大大降低了生產成本。
  2. Production and processing equipment : bearing production equipment, the ball processing equipment, bearing cleaning equipment, packaging equipment bearings, needle roller processing equipment, light jewelry processing equipment, spherical roller processing equipment, rough processing equipment, double - end grinders, spindle, wheel oilstone and other grinding materials, heat production, high - precision coordinates grinder, and outside grinder, seal marking machine, profilometry, contour dynamic analysis, hardness needle - sorting machine, a round instrument, processing tester, processing meter, dynamic vibration and noise analysis, vibration, noise testing device raceway ultra - precision instrument, roughness measuring instrument, the finish detector, sorting machine, converters and bearing products preservatives, lubricants, cleaning agents, such as processing raw materials

    生產及加工設備：軸承生產設備球加工設備軸承清洗設備軸承包裝設備滾針加工設備光飾加工設備球面滾子加工設備毛坯加工設備雙端面磨床電主軸砂輪油石和其他研磨材料熱處理生產高精度坐標磨床內外圓磨床印子打標機輪廓測量儀輪廓動態分析儀硬度針分選機圓度儀加工測試儀加工測量儀振動噪聲動態分析儀震動噪聲測試裝置滾道超精儀粗糙度測量儀光潔度檢測儀分選機變頻器及軸承產品防腐劑潤滑劑清洗劑加工原材料等。
  3. 2, the bearings production and processing equipment signal processing equipment, bearing cleaning equipment, packaging equipment bearings, the bearings production equipment, round instrument, blank processing equipment, double - end grinders, electric spindle and wheel grinding oilstone and other materials, printers marking machine measuring instrument, spherical roller processing equipment, raceway - seiki, roughness measuring instrument, the finish detector converter, hardness needle - sorting machine and new materials, lubricants, preservatives, cleaning agents, testing instruments

    2軸承生產加工設備球加工設備軸承清洗設備軸承包裝設備軸承生產設備圓度儀毛坯加工設備雙端面磨床電主軸砂輪油石及其他研磨材料印字打標機加工測量儀球面滾子加工設備滾道超精機粗糙度測量儀光潔度檢測儀變頻器硬度針分選機及新型材料潤滑劑防腐劑清潔劑測試儀器等。
  4. This paper mainly aims at the strategic demands for large - aperture lightweight mirror proposed by high - tech development. its main research contents are : select material blank for lightweight mirror according to physical and chemical properties of optical glass ; analyze and calculate the deformation quantity of the mirror with finite element method ; design and optimize mirror body structure of 400 lightweight plane mirror and 450 lightweight spherical mirror, analyze glass cutting principle, design specisl - use grinding wheel structure, select reasonable technological parameters to implement the processing of weight reduction holes on 400 plane mirror ; analyze etching mechanism of hydrofluoric acid, look for the technological parameters such as the optimal acid concentration and etching time etc. ; eliminate the stress of weight reduction holes and micro - cracks on 400 lightweight plane mirror ; discuss the processing principle and

    本論文的研究主要是瞄準國家高技術對大口徑輕型鏡的戰略需求而開展的。主要研究內容是：根據光學玻璃的物理與化學性能，選擇輕型鏡坯材料；用有限元法對鏡子的變形進行分析、計算，找出變形規律，優化設計400mm輕型平面鏡、 450mm輕型球面鏡鏡體結構；分析玻璃切削原理，設計專用磨輪結構，選擇合理工藝技術參數，完成400mm平面鏡輕量化減重孔的加工；分析氫氟酸腐蝕光學玻璃機理，尋找最佳酸濃度、腐蝕作用時間等工藝參數，實現400mm平面鏡減重孔應力與微裂紋的消除；討論分離器加工原理和工藝技術特點，完成400mm平面輕型鏡面形加工。
  5. Bearings roller bearings and other components. bearing ring precision rolling production line ; a high - precision, super efficient grinding automatic production line ; bearing assembly line ; signal processing equipment ; blank processing equipment ; crowning roller grinder ; end - grinder ; coordinate precision grinder ;, cylindrical grinder ; surface grinder ; spherical roller processing equipment ; raceway grinder ; heat treatment ; needle processing equipment ; polishing processing equipment ; roller - seiki ; rolling auto - sorting machine parts bearing hardness sorting machine bearing cleaning equipment ; contact angle measuring instrument ; contour meter ; bearing life experimental device ; bearing packaging equipment ; roundness instrument ; dynamic vibration noise analyzer ; noise vibration test equipment ; printing machine measuring instrument ; roughness tester ; scanning electron microscope ; finish detector ; inverter ; spindle, wheel, whetstone and other grinding materials

    軸承套圈精密輾擴生產線高精高效磨超自動生產線軸承自動裝配線球加工設備毛坯加工設備凸度滾子磨床雙端面磨床高精度坐標磨床內外圓磨床平面磨床球面滾子加工設備溝道磨床熱處理生產滾針加工設備光飾加工設備滾道超精機滾動體自動分選機軸承零件硬度選別機軸承清洗設備角接觸測量儀輪廓測量儀軸承壽命實驗裝置軸承包裝設備圓度儀振動噪音動態分析儀振動噪音測試裝置印字機加工測量儀粗糙度測試儀掃描電子顯微鏡光潔度檢測儀變頻器電主軸砂輪油石和其他研磨材料
  6. Analysis which was based on the fracture mode of mould in wire - cutting processing, and the results show that the partial - quenched of mould, the non - uniformity of blank temperature and the carbide segregation inside the material are the main reasons of deformation and cracking

    摘要通過分析在線切割加工中模具的破壞形式表明：模具不完全淬火、坯料溫度的不均勻分佈、材料內部的碳化物偏析是模具變形與開裂的主要原因。
  7. Three factors, such as pull - up type, the materials and structure of crystallizing mould, and the temperature field in crystallizing mould, influencing on continuous up - casting for aluminum were analyzed, which laid the foundation of the application to continuous up - casting technology for aluminum bar

    分析研究了引拔拉坯制式、結晶模材料及結構、結晶模內溫度場三因素對鋁上引連鑄的影響規律，結果表明上引連續鑄造過程中施加適當頻率的反推和反推量有利於桿坯連鑄的持續，結晶模自身的性能及模內溫度場的狀態對金屬鋁桿上引連鑄工藝的實現有直接影響。
  8. Compared with those of as - sprayed ring, hardness and tension strength of area near processing face are increased by 45 % and 40 % respectively. friction mechanical performance of the ring is improved at large extent, and especially the wearing amount is merely 13 % of as - sprayed rings. after dual - direction cyclic pressing, the pore - closed state and the distributing of density and hardness are nearly identical in every part of ring. the friction mechanical property is close to that of single - direction - cyclic - press ring

    靠近壓力加工面部位，硬度較沉積坯提高了45 % ，拉伸強度較沉積坯提高了40 % 。雙向楔壓后孔洞閉合、密度硬度分佈都比較均勻。單向楔壓后，用壓力加工面作為摩擦面， al - 20 % si / sicp復合材料的摩擦磨損性能得到大幅度提高，尤其磨損量為楔壓前的13 % 。
  9. It is sometimes feasible to use features on the design of the part to determine what material to machine away in order to make the part

    通常是使用零件的設計特徵來確定為了加工出成品而需要從毛坯中去除怎樣的原材料體積。
  10. In this thesis, the sls molding properties of some metal - base composite powders composed of metal powder mixed by several regularly used polymers " powder were studied, on the basis of which, a new sls composite material made by 316 stainless steel powder mixed by epoxy powder was developed and produced. the molding technics and adherent mechanism of the material in sls process was analyzed and studied, and the high temperature sintering technics of the green parts of the material was discussed as well

    本文主要針對快速成型的sls方法，研究比較了幾種常用的聚合物粉末添加到金屬粉末中所構成的金屬基復合粉末的成型性，並且研製開發了316不銹鋼粉末與環氧樹脂粉末共混復合粉末作為成型材料，對其sls過程的成型工藝、聚合物粘接機理以及型坯的高溫燒結工藝進行了研究論述，並進一步對型坯的高溫燒結過程、燒結中的收縮變形和燒結后的強度作了分析研究。
  11. In machining a metal part, successive cutting operations are generally carried out, each of which removes material from the workpiece

    在加工金屬零件時，通常需要執行連續的切削操作，每一步操作都將從毛坯上去除一部分原材料體積。
分享友人
分享到 Line

分享到臉書