塑性成型機 的英文怎麼說

中文拼音 [sùxìngchéngxíngjī]
塑性成型機 英文
plastic making machine
  • 塑 : 動詞（塑造） model; mould
  • 性 : Ⅰ名詞1 （性格） nature; character; disposition 2 （性能; 性質） property; quality 3 （性別） sex ...
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  • 機 : machineengine
  1. Fist of all, on the basis of the research of agone boffins, this author investigates the interaction mechanism of bolts and rock, and introduces the elastic ? lastic analytical resolution which is consist of the liner structure, the equivalent reinforced wall rock and the original wall rock in the simple loading from the equivalent well - proportioned view ; this solution is very important meaning for the engineering design. on the basis of coulomb friction model, the author introduces the finite element equation of the contact problem in order to provide the academic foundation for the application of msc. marc. finally, combining the engineering practice of the non - linear analysis of shield tunnel through yellow river of the south - north water transfer and using the model of friction, the author researched the evolution law of stress and displacement field in the structure of grouted rock bolts, and analyzed the effect to the stress and deformation of surrounding rock mass due to anchor supports

    首先，在前人研究成果的基礎上，對錨桿與圍巖的相互作用機理進行研究，利用全長錨固錨桿的中性點理論，從等效均化的角度來考慮錨桿對圍巖的加固作用，並推導了在簡單荷載作用下，含有襯砌、等效加固后的圍巖、原始圍巖三者的彈塑性解析解，對工程設計有著重要的參考意義；在數值模擬方面，以考慮錨固圍巖滿足規則化庫侖摩擦模型為基礎，利用虛功原理推導了接觸問題的有限元方程的計算格式，為開發運用大型商用有限元軟體msc . marc提供了理論根據，也形成了本文的理論基礎：最後，論文以南水北調東線穿黃隧洞穩定性分析項目為工程實例，利用本文所述的接觸問題的摩擦模型理論，對錨桿支護結構的應力場、位移場的變化規律進行了研究，分析了加錨支護對隧洞圍巖應力、變形的影響。
  2. The machine is applicable to the plasticity material to inhibit the craft, such as hurtles to press, curve, turn over the side, lamella to pull to stretch etc. craft, also can used for correct, pressing to pack, the emery wheel model, the cold crowded metals spare parts model, the plastics product and the powder product of inhibit and model craft

    本機器適用於可塑性材料的壓制工藝，如沖壓、彎曲、翻邊、薄板拉伸等工藝，也可用於校正、壓裝、砂輪成型，冷擠金屬零件成型、塑料製品及粉末製品的壓製成型工藝。
  3. Pressure that this series the machine still have the extensive and in general use, be applicable to the every kind of plastic to process with take shape, if wash to press, squeeze, flection, fold the side, rivet jointing, orthopedics etc. ; stalk the pressing of set spare parts pack ; the plastics and what powder product inhibits ; stalk with other is similar to the correcting of spare parts ; the pressing of zero parts packs, and the pulling of spare parts of small scaled plank form stretch, type, fall material, press to print various uses of etc

    本系列機器還具有廣泛的通用性，適用於各種塑性材料的壓力加工和成形，如沖壓、擠壓、彎曲、折邊、鉚接、整形等；軸套類零件的壓裝；塑料及粉末製品的壓制；軸類和其他類似零件的校正；零部件的壓裝，小型板形零件的拉伸、成型、落料、壓印等多種用途。
  4. The catena product is in the light of iso international criterion to design and make iso2858, pumpbody adopt metalline crust pad fluorine plastics inside, impeller and pump - cover all adopt metal embed part wrap fluorine plastics alloy outside to press. to make it possess superduper resist impact and eximious resist causticity, axis - envelop choose advanced outer - install form moire - pipe machine - airproof, airproof of oppositely abrade have silicon nitride chinaware f4 horniness alloy to choose. it has ratio of very high capability and price

    本系列產品按國際標準設計製造iso2858 ，泵體採用金屬外殼內襯氟塑料，葉輪及泵蓋均採用金屬嵌件外包氟塑料合金模壓成型，使其具有超強的抗沖擊能力又有卓越的耐腐蝕性能，軸封選用先進的外裝式波紋管機械密封，對磨的密封面有：碳化硅陶瓷四氟硬質合金可供選擇。
  5. Study on the mechanism of void formation in roto - moulding of long - fiber reinforced resin

    長纖維增強液態反應性樹脂復合材料旋轉模塑成型工藝氣泡形成機理試驗分析
  6. Rapid prototyping technology changed the traditional pattern of product design, which could offer product sample for the designer, reduced design cycle and quicken the schedule of new product design, and it gave the decision - makers visual feeling. ; rp technology provided kinds of molds including resin - boncled mold laminate mold, investment mold and lost foam casting mold and so on for sand casting investment casting and cavityless casting, it could also use direct shell production casting to make pattern dies metal dies die - casting dies injection dies directly, and it could even produce casting products in small scales. the applications of fdm technology in plaster precision casting and the rapid casting technology based on sls technology were introduced, the organic combination between rapid prototyping tecnnology and foundry process, which initiated a new period of rapid manufacturing metal parts, by using advanced new technology alternated traditional foundry industry to make it looked brand - new, thus, the competition of foundry industry would be improved ; rapid prototyping technology offered a rapid economical feasible technical method, common processes of using rapid prototyping technology to produce dies were discussed, in the paper it explored that. the problem of combining rapid prototyping technology with electric arc metal - spraying technology to make metal dies and technics in dies manufacturing of combining rapid prototyping technology with precision casting, rapid tooling based on rapid prototyping, integrated advanced new technology and tradition technology of rapid prototyping manufacture, each superiority were exerted, rapid prototyping technology had been an efficiency measure to rapid update products and develop new product, and to middle -

    快速成型技術改變了傳統的產品開發模式，可以為設計者提供產品樣件，縮短設計周期，加快新產品的開發進度，為決策者提供直觀性；快速成型技術迅速提供砂型鑄造、熔模鑄造、實型鑄造用的各種模樣，包括樹脂模、層壓模、熔模和消失模等，還可採用直接制殼鑄造法直接製造熔模鑄造用的壓型、金屬型、壓鑄型、注塑模，甚至直接製造小批量鑄件，介紹了熔積成型技術在石膏型精密鑄造上的應用和基於選擇性激光燒結技術的快速鑄造技術，快速成型技術與鑄造工藝的有機結合，開創了快速製造金屬零件的新階段，對用高新技術改造傳統的鑄造工業，使其面貌煥然一新，增強鑄造行業的競爭能力；快速成型技術為母模的製造提供了一條快速、經濟、可行的技術途徑，討論了利用快速成型技術製造模具的一般工藝方法，探討了將快速成型技術與金屬電弧噴鍍技術結合起來快速製造金屬模具問題，以及快速成型技術與精密鑄造技術相結合的模具製造工藝，基於快速成型製造的快速模具技術，集成了快速成型製造高新技術和傳統技術，發揮各自優勢，已成為產品快速更新換代和新產品開發及中、小批量生產的有效手段之一。
  7. Cqf product is mainly made of reinforced pp and all flow - through pump parts adopt injection mould with resistance to most organic and inorganic acid, alkali and salty solutions, applicable for being exposed outdoor with fine anticorrosive performance of stress corrosion cracking

    Cqf型產品以增強聚丙烯為主要材料，泵的過流零部件均為注塑成型，能耐大多數的有機和無機酸、堿和鹽類溶液，也適于在室外大氣中暴露，對應力腐蝕破裂的抗蝕性良好。
  8. This is a thread producing machine which uses its three thread rolling dies, mounted in the same seperation angle of 120 ', to realize roll forming of the workpiece, for metal has the performence of plastic deformation under the pressure operation

    該機床是利用金屬在壓力之下產生塑性變形的特點，用三個互成120度夾角的滾模，對工件進行滾壓成型的螺紋加工設備
  9. An strippable antirust packing plastic which was hot - melt type and solvent type was made of eva resin as the main film components, corrosion inhibitor and modifying agents, and the application of the material in the antirust of cutting tool and machine tool were discussed

    摘要介紹了以熱塑性樹脂為主要成膜物質，加入防銹劑和改性劑製成熱熔型和溶劑型可剝離防銹包裝材料，並敘述了其在刀具和機床防銹方面的應用情況。
  10. Thermosetting injection moulding machine

    熱固性塑料注射成型機
  11. Associated with a project of the planned xuefengshan tunnel with 7. 6 km long during the construction of shaoyang to huaihua expressway in hunan province of shanghai to ruili national trunk highway, this paper firstly makes an introduction of the frequently - used analysis & computation methods for tunnel supporting structure. then, based on the analysis of the basic theory about the interaction mechanism of surrounding rock and support structure, a spatial computation model is made, a coupling numerical computation method with 3 - d elastic - plastic finite element and infinite element is proposed, and a comprehensive analysis has been made to the effects of the overall stability and safety of the surrounding rocks of different characteristics, different classes and under different construction methods. and thus the problem of 3 - d infinite region to which applying the general finite ca n ' t do has been resolved

    6公里的雪峰山隧道工程，首先介紹了隧道支護結構的常用分析計算方法；然後通過對隧道施工過程中，洞室穩定性與支護結構相互作用機理的深入分析，建立了隧道施工過程的空間計算模型，提出了採用三維彈塑性有限元-無限元耦合的數值計算方法，綜合分析了隧道在不同圍巖特性和圍巖類別條件下，以及不同施工開挖方案等對隧道圍巖整體穩定和安全性的影響，從而解決了通用有限元方法難以解決的隧道三維無限域問題；其可充分發揮有限元法在分析非線性方面的有效性和成熟性，以及無限元法在分析處理無限域和半無限域方面的精確性和簡便性，為隧道施工過程中圍巖的穩定性分析開辟了一條新的途徑。
  12. Plastic logo line is a combination of a series of single machineries, which has been rationally designed according to pvc ' s specialties of droppable, moldable and fast - molding, and becomes a semiautomatic production process, it ' s easy to operate and is used in a variety of products, such as color labels or trademark, tags, decorations, and sealed cushion for bottle cap, etc

    滴塑產品生產線是由一系列單機組合而成的整體，它根據pvc （聚氯乙稀）糊狀樹脂的可滴性、可塑性、快速成型的特性作出合理設計，形成半人工半自動生產工藝，工藝之簡單，用途之廣泛，是生產各種色彩商標、掛標、裝飾品、瓶蓋密封墊等塑膠製品的理想設備。
  13. Secondly, in view of the limitation and shortage of traditional simulation of finite element approaches for bolt, a new composite grouted bolt element including nonlinear contacting relation will be built based on the above study of the mechanics mechanism of fully grouted bolt. then, an elastic - plastic finite element program will be developed for the analyses of tunnel stability, in which the composite grouted bolt element and nonlinear finite element analysis method will be used ; the patterns and the affect of main design parameters on the support effect of bolt will be analysed using the program, and conclusions of guidance importance for tunnel support design will be drawn. finally, simulation compution for the excavation and support of a highway tunnel will be made out using the above production, and the method of application of the program will be discussed ; analysis of the deformation, stress and distribution of plastic range will be done, and rational support plan will be worked out, which is of guidance importance for tunnel support design and the thery and technique of fully grouted bolt used in tunneling will be perfected further

    首先，本文在綜合分析隧道穩定性影響因素及失穩破壞模式的基礎上，對全長粘結式砂漿錨桿作用力學機理進行了深入研究，為全長粘結式砂漿錨桿的有限元模擬分析奠定了基礎;其次，針對傳統錨桿有限元模擬方法的局限性與不足，在上述全長粘結式砂漿錨桿作用力學機理研究基礎上，建立出能反映界面非線性粘結的新型復合砂漿錨桿有限單元模型;然後，運用上述復合砂漿錨桿單元模型，引進非線性有限元分析手段，開發了隧道支護穩定性分析的有限元程序，並就全長粘結式砂漿錨桿的型式與設計參數對支護效果的影響進行了深入探討，得到了對隧道支護設計具有指導意義的結論;最後，運用本文研究成果對某公路隧道工程實例進行了開挖與支護的模擬計算，探討了其應用方法，並就隧道變形與應力及塑性區分佈規律進行了分析，從而提出了合理的支護方案，為隧道支護設計提供了參考依據，完善了隧道全長粘結式砂漿錨桿支護的理論與方法。
  14. At the same time, the relationship between macro mechanical behavior and meso mechanism was investigated. polycrystalline structure was possessed by most engineering materials. under load the anisotropy of the constituent grains leads to strong inhomogeneities of stresses and strains on the grain level

    基於相同的方法，建立隨機取向晶粒集合形成的多晶有限元模型，對多晶材料的塑性行為和循環塑性行為進行研究，結果展現了多晶材料的彈性各向同性性質和塑性變形的局部化過程。
  15. Ys series prepiasticization automatic plastic injection moulding machines adopt the most advanced technoiogy of the world in the mechanical structure. hydraulic principle and electrical control, with more scientific and practical applicability

    永生牌ys系列預塑式全自動塑料注塑射成型機，貫徹永生以「精益求精」的精神，對機械結構液壓原理電氣控制採用現代國際先進的技術設計，使產品更具先進性，科學性和實用性。
  16. The material with polymers property in the process of plastic injection show the totally differences in physical and chemical, rheological and thermal property, which bring forward some special requirement of plastic moulding technology, and then the special type of the plastic injection machine and the special machine are developed, the research object in the thesis is the plastic injection machine of thermohardening and the bmc bakelite moulding machine

    高聚物特性的物料，在注塑過程表現出來的物理化學性質、流變性質、熱性能有很大區別，對注塑成型工藝提出一些特殊要求，於是就有了一些特種注塑機和專用機的發展，本文的研究對象是熱固性塑料注塑機及bmc電木成型機。
  17. Ningbo yongtai plastics machinery co, . ltd is specialized in the production of 100 - 3000 g hot plastic injection machine of yt and ytf series and high - pressure pumps for oil - field and measuring pumps. the factory has the ability to manufacture more than 1500 plastic injection machine, 500 high - pressure pump and over 800 measuring pumps annually

    寧波永泰塑料機械有限公司專業生產yt ytf系列100 - 3000克熱塑性塑料注射成型機油田用系列高壓泵和各類計量泵等，已形成年產注塑機1500餘臺高壓泵500餘臺計量泵800餘臺的生產規模。
  18. Ningbo yongtai plastics machinery co, . ltd is specialized in the production of 100 - 3000 g hot plastic injection machine of yt and ytf series and high - pressure pumps for oil - field and measuring pumps. the factory has the ability to manufacture more than 1500 plastic injection machine, 500 high - pressure pump and over 800 measuring pumps annually. covering an area of 30 thousand square meters, the factory is equipped with advanced processing machines

    寧波永泰塑料機械有限公司專業生產yt 、 ytf系列100 - 3000克熱塑性塑料注射成型機、油田用系列高壓泵和各類計量泵等，已形成年產注塑機1500餘臺、高壓泵500餘臺、計量泵800餘臺的生產規模。
  19. It introduces the basic composing and three typical work - place of the machines used as automatically plastics - sucking and vacuum - molding, expounds the system configuration and the method of improving reliability

    摘要介紹了自動真空吸塑成型機的基本構成和3個典型工位，重點闡述了系統的軟硬體結構和提高系統可靠性的措施。
  20. Ningbo yongtai plastics machinery co, . ltd is specialized in the production of 100 - 3000 g hot plastic injection machine of yt and ytf series and high -. . .

    寧波永泰塑料機械有限公司專業生產yt ytf系列100 - 3000克熱塑性塑料注射成型機油田用系列高壓泵和各類計量泵等，已形成年產注塑機1500餘臺高壓泵500餘臺計. .
分享友人
分享到 Line

分享到臉書