擬需求表 的英文怎麼說

中文拼音 [nǐxūqiúbiǎo]
擬需求表 英文
pseudo-demand schedule
  • 擬 : 動詞1. （設計; 起草） draw up; draft 2. （打算; 想要） intend; plan 3. （模仿） imitate
  • 需 : Ⅰ動詞（需要） need; want; require Ⅱ名詞1. （需用的東西） necessaries; needs 2. （姓氏） a surname
  • 求 : Ⅰ動詞1 （請求; 要求） ask; beg; request; entreat; beseech : 求人幫忙 ask sb a favour; ask a favou...
  • 表 : Ⅰ名詞1 （外面;外表） outside; surface; external 2 （中表親戚） the relationship between the child...
  • 需求 : needs; need; demand; requirement
  1. The feedbacks of position, velocity, acceleration and dynamic pressure were applied to adjust the model, so the control system of single jar electrodraulic servo mechanism was built. to reduce the system error and interference error, the compound control was designed. the results of simulations showed that the magnitude attenuation and phase lag of the system come to the project demand

    引入包括位置反饋、速度反饋、加速度反饋和動壓反饋在內的反饋控制技術對電液伺服驅動機構模型進行綜合校正，從而建立單缸電液伺服控制系統，並在分析系統誤差和擾動誤差后，加入復合控制減小系統誤差和抑制干擾，模擬結果表明復合控制系統的控製品質有了明顯改善，能夠滿足工程需求。
  2. This paper studies the design documents of the avionic system detailedly, including the interface control document and detailed design requirements, and summarizes the data structures and the communication formats of the system, and designs the simulation database. this paper also studies some protocols such as gjb289a, arinc429 and udp etc, and then determines the methods of data processing. according to the theory of the software engneering, this paper completes the requirements analysis, the globle

    本文根據設備的具體設計要求，完成了模擬設備的硬體設計;詳細研究了航電系統的系統設計文件? ?介面控制文件和詳細設計要求，總結出了航電系統的數據結構和消息通訊格式，並在此基礎上設計了用來表達模擬對象的關系型模擬數據庫;研究了gjb289a 、 arinc429等總線協議以及udp網路協議，明確了各類數據的處理方法;按照軟體工程的開發理論，完成了模擬軟體的需求分析、概要設計和詳細設計，進而通過編程在labwindows / cvi環境下實現了一個界面友好、靈活通用的模擬平臺。
  3. If a securities investment trust fund operated by a site approved by the competent authority to engage in domestic futures trading wishes to apply for an exemption to position limits, the trust fund shall complete and submit the " application for a securities investment trust fund operated by a securities investment trust enterprise to open a futures trading hedge account " ( form 3 ) together with the required supporting documentation to the exchange

    四）依主管機關規定得於國內期貨市場從事國內期貨交易之證券投資信託事業所管理之證券投資信託基金，因避險需求而擬申請豁免交易規則之部位限制規定者，應檢具證券投資信託事業所管理之證券投資信託基金設立期貨交易避險帳戶申請書（附表三） ，載明其應記載事項，連同應檢附書件，向本公司申請。
  4. Then, the continuous beam bridge cad system is taken as a real example, to analyse the system structure including the layout, data requirements, procedure diagram of the sub - systems such as beam calculating and modeling, construction simulating, structure analysis, result output, pre - stressed tightwire layout, general tightwire layout, design graphic plotting

    然後，以「連續梁計算機輔助設計系統」為實例，詳細分析了該系統的整體結構，以及梁部計算模型生成子系統、施工過程模擬子系統、結構分析子系統、計算結果審核和文本輸齣子系統、預應力鋼束布置子系統、普通鋼束布置子系統、設計圖表子系統的層次結構、數據需求和處理流程。
  5. If a securities firm approved by the competent authority to engage in futures trading in the domestic futures market wishes to apply for an exemption to position limits for hedging purposes, the firm shall complete and submit the " application for a securities firm to open a futures trading hedge account " ( form 1 ) together with the required supporting documentation to the exchange

    一）經主管機關核準從事國內期貨市場期貨交易之證券商，因避險需求而擬申請豁免交易規則之部位限制規定者，應檢具證券商設立期貨交易避險帳戶申請書（附表一） ，載明其應記載事項，連同應檢附書件，向本公司申請。
  6. If the national finance stabilization fund, the civil servant pension fund, the labor pension fund, the labor insurance fund, the funds operated by the directorate general of postal remittances and savings bank, and other financial and insurance institutions wish to apply for an exemption from position limits for hedging purposes, the fund or institution shall complete and submit the " application for juristic person to open futures trading hedge account " ( form 4 ) together with the required supporting documentation to the exchange

    五）國家金融安定基金、公務人員退休撫恤基金、勞工退休基金、勞工保險基金、郵政儲金匯業局所管理之郵政資金、金融及保險機構，因避險需求而擬申請豁免交易規則之部位限制規定者，應檢具法人機構設立期貨交易避險帳戶申請書（附表四） ，載明其應記載事項，連同應檢附書件，向本公司申請。
  7. Portable dso ( digital storage oscilloscope ) is the extension and development of the conventional oscilloscope. they are more integrative, more powerful and less power consumption, as well as their portability meets the demand of the electronic instrument

    便攜式數字存儲示波表（ dso : digitalstorageoscilloscope ）是傳統電子測量儀器模擬示波器功能的延伸和發展，它充分利用了當今集成電路所具有的高集成度、超低功耗等優點，而且也滿足了人們對電子儀器設備的便攜性需求。
  8. The research paper is based on the the latest softwares of the managing inventory, its research subject is about simulating the most appropriate inventory quantity and ordering quantity by statisticing the probability of the random require quantity. its purpose is to provide the relied basement for determining the most appropriate inventory quantity and ordering quantity, the deterring policy quality will be raised, so the damage caused by unfit inventory quantity and the benefit of the entrerpreneur will be raised. the research method is by building the inventory management information system, the system includes automated management of parts entering and going out the datasbase. requesting the records of parts entering and going out the datasbase and displaying the sygonal when the inventory quantity is short out. computer calculating the fix period remaining, requesting remaining at any time and displaying if goods need ordering, all the partsof certain a product going out of basement and at the same time checking if the storaging quantity is enough. then simulating the most appropriate inventory quantity and ordering quantity simulating method is as follows : statisticing the random required quantity. calculating the probability, standing for the values with data range producing random data by function accordingly calculating the random required quantity. thenext step is simulating all the projects after pressing in the simulating conditions. finally selecting the best

    本文通過分析國內外關于庫存管理軟體的發展情況，提出在線統計貨物出庫情況的基礎上利用模擬方法確定最優存儲方案，其目的是為制定合理的貨物安全庫存量和訂貨量提供可靠的依據，提高企業管理人員的決策質量，從而減小資金的佔用和缺貨損失，提高企業的經濟效益。通過研製庫存管理信息系統使庫存信息管理自動化，也就是實現貨物入出庫管理計算機管理、自動查詢貨物入出庫情況並在缺貨時給予提示、使用計算機貨物余額定期結算、貨物余額實時查詢並顯示是否需要訂貨、裝配出庫管理使得只要輸入需要裝配產品代號和數量，組成它的所有零件就會自動檢庫和出庫。然後對安全庫存量和訂貨量進行模擬，模擬方法是首先自動統計貨物在過去某一段時間內的需求量，計算出概率，用隨機數的范圍表示其概率數值的大小，利用隨機函數產生隨機數、從而間接的產生隨機需求量，給定模擬天數和其他模擬條件模擬各種方案，從眾多的存儲方案中找出最優存儲方案。
  9. To spark their thinking, each group created a fictional, but specific, representative customer with a full set of personal and professional characteristics, such as age, occupation, and hobbies, in addition to their volunteer needs

    為了活躍思維，每個小組都安排了虛擬但是具體的有代表性的客戶，這個客戶有完全的個人和職業特徵，例如年齡，職業，愛好以及義工需求，這樣體現了客戶需求的真實情況和生動說明。
  10. As a result, c2000 compiler can generate a compactly structured intermediate code effectively, which can be executed by c2000 virtual machine efficiently, safely, and stably. thus the problem put forwarded at the beginning of this paper is solved, and the requirement of monitoring configuration software in the support of programming interface is satisfied well

    實際應用表明， c2000編譯器能夠生成結構緊湊的中間代碼，其虛擬機對中間代碼解釋執行時，效率高，運行穩定、可靠、安全，解決了一般組態軟體中在對用戶編程介面支持方面的問題，很好地滿足了監控組態軟體的需求。
  11. This paper focuses on the following research work : 1. proposes a genetic algorithm based on matrix encoding for next hop route with load and time delay ; 2. proposes a genetic algorithm for shortest route via designated node, solves the problem which dijkastra algorithm need two times or more to compute ; 3. proposes a scheme of dividing populations and dividing time in order to improve the success ratio ; 4. proposes a network model for directional motion, performs evaluation for mobile ip based on wlan, and concludes some useful results

    提出了解決移動ip中過指定點的路由的遺傳演算法，解決了dijkstra演算法需要分次計算的問題，通過記錄遺傳演算法的疊代結果還可以給出次優解路由； 3引入了分群和分周期的操作策略，對過指點最短路由的遺傳演算法進行了改進，模擬分析表明使用該遺傳演算法求解過指定點的路由獲得了比inagaki演算法更高的成功率； 4
  12. According to the demand of the technology of gas nitriding, the author firstly put forward total demand analysis and systematic model - making for gas - nitriding furnace ' s temperature control system with uml in order to definite the temperature control system ' s functional requirement and the interaction of each object in this system on the basis of this idea. it ' s thought that the key step for realizing the temperature control system is the analysis and the design of the pid controller. considering that the gas - nitriding furnace has significant temperature lag, the author initially pointed out the opinion of realizing the system of temperature control by pid controller with pure lag compensation and then designed the parameter of pid controller with pure lag compensation and ordinary pid controller by matlab6. 5

    這篇論文以作者本人在原工作單位的技術改造實踐中（即滲氮爐的技術改造）所遺留下來的技術問題為背景，根據氣體滲氮工藝的具體需要，首先提出了用uml對滲氮爐溫控系統進行總體的需求分析和系統實物建模以明確溫控系統的功能需求及各對象間的交互，在此基礎上分析得出溫控系統實現的關鍵所在即pid控制器的分析設計和實現，由氣體滲氮爐存在較大的溫度滯后這一特性，初步提出用帶純滯后補償的pid控制器來實現溫控系統的溫度控制，隨后藉助于matlab6 . 5平臺對帶純滯后補償的pid控制器和常規的pid控制器進行參數的設計與整定，進而在matlab6 . 5的simulink模擬環境中對基於兩種不同pid控制器的滲氮爐的兩種溫控系統的設計方案進行了模擬實現及模擬結果比較，結果表明，採用帶純滯后補償的pid控制系統的魯棒性較常規的pid控制系統好。
  13. It has conducted an analysis of the virtual aircraft instrument system, finds out the characteristics of the system in flight simulator, and makes clear the data relationship between the virtual aircraft instrument system and other subsystems in flight simulator, including the function request as well as performance request for the system. with professional software vaps design the appearance of virtual aircraft instrument uses atn ( augment transition network model ) to develop the

    通過對整個虛擬航空儀表系統的需求分析，找到作為飛行模擬器虛擬航空儀表系統的自身特點，明確虛擬航空儀表系統和整個飛行模擬器及其它子系統之間的數據關系，結合航空儀表系統的實際應用確定虛擬航空儀表系統的功能要求和性能要求，確定虛擬航空儀表系統開發的整體方案和流程，最終開發整個飛行模擬器虛擬航空儀表系統。
  14. Simulation is operated with ns2 under linux, and the simulation results show that, the presented algorithm is simpler and more practical, while it can improve the fairness index of ad hoc network to a large extent compared with the ieee802. 11 binary exponential backoff ( beb ) algorithm. it can make better use of the wireless channel by dynamically adjusting its backoff timer according to the network ' s contest situation. in addition, service differentiation can be achieved among flows with different qos requirements and thus the qos for medium access control in ad hoc network is improved

    通過在linux系統下利用networksimulator （ ns2 ）模擬工具對演算法進行計算機模擬分析，結果表明，與ieee802 . 11標準採用的二進制指數退避（ beb ）演算法相比，該文所提演算法更簡單、高效，它能在很大程度上提高adhoc網路通道接入的公平性，並能動態地提供服務區分，保障對多媒體等多種實時業務的傳輸需求，同時，演算法可以根據網路當前具體的競爭激烈情況，動態調整退避時間值，從而提高通道的利用率。
  15. Finally, in order to solve the problems encountered in experiment, an improved design, including gas path, mechanism and controller design, is proposed. experiments are accomplished in the improved system platform, and the results demonstrate that the improved system can meet the requirement of simulating the turbine outlet temperature of aero - engine

    最後，針對試驗中遇到的問題，從氣路部分、機械部分以及控制器三個方面對溫度模擬系統進行了改進設計，並在改進的系統平臺上進行了試驗，試驗結果表明改進后的系統能基本滿足對發動機渦輪出口溫度信號模擬需求。
  16. This paper particularly and thoroughly studied the development of air situation simulation system on a certain military information system. firstly introduce the system ' s frame and analyze the whole system by ooa technology, from which abstract some clusters and give the connection of these clusters, secondly give the arithmetic about plane ' s track, radar and sentry ' s scan function by thoroughly study the curve ' s fit and insert value method, show a better method for how to inspect plane, finally paint the system ' s flow chart. the system is basically credible by test

    本文主要討論了某軍用信息系統的空情模擬部分，首先從系統的整體功能出發，宏觀地描繪了該系統的基本框架，然後根據需求情況對該系統的各個功能運用面向對象的思想進行分析，從中抽象出多個類，設計了類與類之間的關系，並通過對各種曲線的擬合和插值演算法進行深入細致的研究，給出了求飛機飛行軌跡的演算法實現，以及雷達和哨所的方程表示，對于監測飛機的演算法結合實際給出了一種比較好的解決方法，最後繪制了整個軟體的流程圖以及描述了各個模塊的具體實現過程，完成了系統的需求。
  17. Then, the dielectric targets ' electromagnetic scattering is researched. an important principle of electromagnetic field theory - - equivalent theory is introduced. as well as the conducting target, the geometrical model of the dielectric target should first be built, then triangular patches are used to model the surface of the dielectric target. different from the conducting target, there has not only equivalent electric current but also has equivalent magnetic current on the surface of the dielectric target. so now should built two equations - efie and mfie to obtain the unknown current coefficients. the rcs of dielectric sphere, dielectric cylinder, dielectric cube are calculated respectively

    其次，本文研究了介質目標的電磁散射，介紹了電磁場理論的一個重要的原理? ?等效原理。與導體目標一樣，先建立介質目標的幾何模型，然後用三角形面元模擬介質表面。與導體目標不同的是，在介質表面除等效電流外，還有等效磁流，因此需建立兩個方程? ?電場積分方程（ efie ）和磁場積分方程（ mfie ）來求解未知的電磁流系數。
  18. Then, it comes to the effect of the virtual technology on individual from different aspects such as the spatio - temporal view, the individual roles and the realization of subconscious needs, etc. based on the previous analysis, the third part reviews the deep philosophical root for the difference between the virtual and traditional technology, and reaches the conclusion that the virtual technology has surpassed the reality of the traditional philosophy. that is, it owns the quality of " super - reality ". as for the fourth part, it further analyzes the reasons, the characteristics and the manifestation of the moral problems caused by the effect of the virtual technology on individual, and accordingly suggests the construction of the network morality, with the significance of such construction, the principles and ways of the construction and the tendency of the virtual technology development

    首先通過與傳統技術的比較，分析了並得出了虛擬技術的本質及其特點；其次研究了虛擬技術的出現在時空觀、個體身份與角色以及實現潛意識需求等方面對個體產生的影響；第三部分在前面論述的基礎上，重點考察了虛擬技術與傳統技術之所以不同的深層的哲學根源，得出虛擬技術超越了傳統哲學的現實性，具有「超現實性」 ；第四部分繼續深入分析網路虛擬技術對個體的影響所導致產生道德問題的原因、特性及表現；最後，提出建構網路道德的倡議，深入剖析了建構網路道德的重要意義，創造性地提出建構網路道德應遵循的原則和途徑，並立足現狀，展望網路虛擬技術的發展趨勢；結束語部分，總結全文，並提出本文的一些不足之處，希望得到批評指正。
  19. In allusion to the two - way traffic artery, the dynamic optimization model which adopt cycle length, split and offsets as the decision variables is established, and the simulation is conducted in a dynamic traffic demand mode

    針對一種雙向交通的飽和交通干線系統，建立了以信號周期、綠信比和相位差為優化控制變量的交通流動態優化控制模型。並在一種動態的交通需求模式下進行了模擬研究，結果表明所提方法的有效性。
  20. For power control of listening users, forward power control method are introduced based on full, multichannel, filtered report, and collision method etc. the full report method has redundancy report information, and its real - time performance is bad, multichannel report is introduced to improve the real - time performance, and filtered report is introduced to eliminate the redundancy information, finally the collision method introduced can not only get higher real - time performance but also diminish the redundancy information ; 2. in order to meet the requirements of making the dynamic simulation of trunking group system, the ms ’ s random move equation is brought forward, the simulation of ms ’ s distribution is done and the integrated channel model are presented ; 3. the smart predicative model of power control is introduced to overcome the delay and track the change of the complicated network, with this model, the power control ‘ s performance is greatly improved

    全匯報方法存在冗餘的匯報信息，而且實時性較差，為了改善實時性提出了多通道的匯報方式，為了改善冗餘匯報而提出了篩選法，最後介紹的碰撞法在減少冗餘信息的同時又提高了實時性;二、為了集群功率控制動態模擬的需要，提出了移動臺的隨機運動方程，進行了有關移動臺的分佈模擬，建立了綜合的通道模型;三、希望克服延時和跟蹤復雜網路環境變化，提出了功率控制的智能預測模型，通過智能預測模型可以改善功率控制的性能，著重介紹了採用神經網路的方法實現智能預測的通用模型，從而跟蹤復雜多變的無線環境，諸如慢衰落及快衰落（包括多徑衰落、多普勒效應所引起的衰落）等網路特徵，達到預測功率需求;四、採用二級正交碼和智能天線（空分多址）的方法進行組內用戶的識別，改進功率控制效果;五、話權用戶的前向和反向功率控制方法;六、對引入gota的cdma系統提出了復合容量表示方法，並作容量分析，探討有關gota系統的qos問題。
分享友人
分享到 Line

分享到臉書