擬靜態過程 的英文怎麼說

中文拼音 [nǐjìngtàiguòchéng]
擬靜態過程 英文
quasi-static process
  • 擬 : 動詞1. （設計; 起草） draw up; draft 2. （打算; 想要） intend; plan 3. （模仿） imitate
  • 靜 : Ⅰ形容詞1. （安定不動; 平靜） still; calm; motionless 2. （沒有聲響; 清靜） silent; quiet Ⅱ名詞（姓氏） a surname
  • 態 : 名詞1. （形狀; 狀態） form; condition; appearance 2. [物理學] （物質結構的狀態或階段） state 3. [語言學] （一種語法范疇） voice
  • 過 : 過Ⅰ動詞[口語] （超越） go beyond the limit; undue; excessiveⅡ名詞（姓氏） a surname
  • 程 : 名詞1 （規章; 法式） rule; regulation 2 （進度; 程序） order; procedure 3 （路途; 一段路） journe...
  • 靜態 : [物理學] static state; quiescent condition; steady state; statics; dead level; akinesis; akynesis...
  • 過程 : process; procedure; transversion; plication; course
  1. Virtual reality technology can provide " participants " with a feeling of being personally on the scene. as a main actor in the virtual environment, userscan control any objects in the virtual environment arbitrarily and can get reaction in time. in the hyperspace of the information, he can get acknowledge with their own percipience and cognition, and, seek the solutin, and form the new conception. the association of the virtual reality technology and java technology intensify the interaction between the users and viryual reality technology. with the interface provided by java, the user can control any objecs and change the attributes ( such as position, angle, color and etc. ). this paper formulizes application of the virtual reality technology in the system of the building seilling which uses the real three dimensions models to replace of static picture ' s and word ' s description. in the process of the practice, the paper analyses the difference between javascript, java claa and java applet, and formulize the their applications in this system

    用戶在多維信息空間中，依靠自己的感知和認知能力全方位地獲取知識，發揮主觀能動性，尋求解答，形成新的概念。虛擬現實技術與java技術的結合增加了虛擬現實技術與用戶的交互功能，用戶可以通過java提供的界面，操縱場景中的任何物體，並改變相應的屬性（如：位置，角度，顏色等等） 。本篇論文闡述了虛擬現實技術應用在售樓系統中，用真實的三維模型來代替原有的靜態圖片及文字描述，在實踐過程中，分析了javascript ， java類，及javaapplet實現功能中的利弊，分別闡述了它們在本系統中的應用，從理論上講，本課題所研究的虛擬現實技術不只適用於售樓系統的電子商務中，同樣可用於軍事和演習、醫學、教育、娛樂和工程設計等領域。
  2. This paper establishes a model simulating dam actual placing process and considering the non - continuity of initial temperature on the boundary of new and old concrete, daily air temperature change, concrete - placing temperature, hydration heat, heat insulation on boundary, water - storing process, placing intermission and curing with water. the calculation of stress field considers the concrete weight, static water pressure, thermal stress, different autogenous volume change between rcc and normal concrete, change of elastic modulus of concrete with age and creep action

    考慮了乞今最為全面的初始條件和邊界條件，包括模擬壩體的實際升程過程，考慮了新老混凝土接觸面上的初始溫度不連續，逐日的氣溫變化，混凝土的入倉溫度，水化熱溫升，邊界保溫，水庫蓄水過程，澆築間歇以及灑水養生等因素；應力場的計算考慮了混凝土的自重，靜水壓力，溫度應力，常態混凝土與碾壓混凝土不同的自生體積變形，混凝土的彈性模量隨齡期的變化以及徐變的作用。
  3. In the second place, based on the asu of buggenum igcc plant in netherlands, both static and dynamical model for distillation tower of the asu are created and some valuable conclusions are gained as well. finally, a compartmental simplified model is created for distillation tower of the asu, in order to reduce the simulation time and increase the simulation efficiency. the new model will be helpful to the further simulation and on - line optimal control for the asu of the igcc plant

    其次，本文以荷蘭buggenum電站的空分系統為原型，基於matlab建立了空分系統精餾塔的半圖形化動、靜態數學模型，並通過模擬，得出了一些有價值的結論：當空分系統的壓力變化時，氧氣產品濃度的響應時間常數為兩小時左右，說明空分系統是igcc電站最大延遲環節；而且雖然氧氣濃度最後會穩定在igcc電站所要求的范圍之內，但在過渡過程中會超出限制，這些都為igcc電站的安全運行及控制系統設計提供了有價值的信息。
  4. The present study is done under the guidance of the reading theories of contemporary cognitive psychology. starting with an analysis of the reading process, it aims to provide a factual survey on the differences between declarative knowledge and procedural knowledge and find the main causes of difficulties for professional school students in reading. it is found that declarative knowledge is static, represented by schemata, while procedural knowledge is dynamic, represented by the " if - then " model

    本研究擬以當代認知心理學的閱讀理論為指導，以英語閱讀過程分析為切入口，以中職生（包括職業中專和綜合高中的學生）為主要研究對象，對中國學生個體在閱讀過程中表現出的在以圖式為其綜合表徵形式的靜態性的陳述性知識和以「 if - then 」產生式為其表徵形式的動態性的程序性知識方面的差異進行實際調查，了解造成閱讀困難的根源所在。
  5. Based on the pseudo - static experimental results of nine abnormal joints, the damage process of abnormal joint is divided into four stages of original crack, entire crack, ultimate state and failure, the effect of axial force ratio, stirrup ratio and height of column section on seismic behavior of abnormal joint are discussed, the conclusion that anti - shear capacity of abnormal joint are studied in entire crack state by studying the minor core of abnormal joint is made, the calculating formula for anti - shear capacity of abnormal joint is proposed with a view to asymmetry in stirrup yield

    摘要根據9個鋼筋混凝土框架異型節點試件的擬靜力試驗結果，指出異型節點受力過程分為初裂、通裂、極限和破壞4個階段；討論了軸壓比、節點核芯配箍率、柱截面高度變化對異型節點抗剪性能的影響；提出應考慮節點核芯區箍筋屈服的不均勻性並在通裂狀態下以「小核芯」為分析單元來研究此類節點抗剪承載力的建議；最終給出了異型節點抗剪承載力的計算公式。
  6. Abstract : reviewed are five methods for the analysis of the penetration of jacked - in piles, namely, cavity expansion method, strain path method finite element method, slip line method and calibration model test. after analysis, it is pointed out that it is more rational to adopt sub - statical spatial axisy numerical formulas based on traditional plane - strain cavity expansion method in the analysis. after spatial closed - form solutions are obtained for soil movements, stresses and initial excessive pore pressures generated durihy pile penetration are found out. it is suggested that finite element analysis together with centrifugal model test be used in verifying the results

    文摘:在分析飽和粘土中靜壓樁的貫入機理的基礎上，對靜壓樁沉樁分析的圓孔擴張理論、應變路徑法、有限元分析、滑移線理論和模型槽試驗等五種方法逐一進行評述，並提出在傳統的平面圓孔擴張理論基礎上加以改進，採用準靜態空間軸對稱方程組對靜壓樁貫入過程進行模擬，從而得出土體位移、應力、初始超孔壓的空間解析解，同時採用有限元分析、模型槽試驗相互印證的研究方法
  7. According to the request of the standard in electric industry in china named " on line check and test rules of analog and digital control system of power station ", every system is tested, and according to technological guides and operation rules, static and dynamic trial are required to be done, the quality of adjust, and response time also adapt to the requirement

    機組整套試運以後，各控制系統逐步投入。依據中華人民共和國電力行業標準《火力發電廠模擬量、開關量控制系統在線驗收測試規程》的要求進行測試，並按照技術指標及運行導則要求均做過靜態、動態特性試驗，調節品質、響應時間均符合要求。
  8. The 3d model of mold is analyzed in 3d fem by using ugh. base on the analyses result, some danger structure of the model have been found and some suggestions of the mold modification are given. since doing a lot of research about the 3d cadvcae technology, a 3dcad system of selecting mold for aluminum material have been developed and the method of analyzing the 3d model is provided in this paper

    然後，為了能真實地模擬實際生產過程，進行鋁與模具鋼在一定表面粗糙度、不同溫度條件、不同潤滑接觸狀態下的最大靜摩擦系數實驗，總結摩擦系數隨溫度變化的規律性和取值范圍；最後，應用ug 17 . 0三維有限元cae模塊進行模具三維力場分析，根據三維有限元的結果分析，對模具危險部分進行預變形的處理和優化，改善模具受力變形的狀況。
  9. The qualitative study and quantitative simulation has resolved the " seven analysis " that are qualitative analysis ( characteristic analysis of static geologic elements ), boundary analysis ( of oil and gas distribution ), time analysis ( of pool - forming ), direction analysis ( of migration of oil and gas ), quantitative analysis ( of migration and accumulation scale of oil and gas ), location analysis ( of petroleum province ), and zone analysis ( of oil and gas accumulation )

    含油氣系統定性研究和盆地模擬定量過程模擬及其相互關系研究解決了「七定」問題，即「定性」 （靜態地質要素的特徵描述） 、 「定界」 （油氣分佈邊界） 、 「定時」 （油氣成藏形成時間） 、 「定向」 （油氣運移方向） 、 「定量」 （油氣運移聚集規模） 、 「定位」 （油氣聚集區）和「定帶」 （有利區帶預測）問題。
  10. Abstract : the purpose of this paper is to investigate the decay behavior and dynamics of a quasilinear partial differential equations with nonlocal boundary conditions which is motivated by model problems, arising from quasi - state thermoelasticity, etc. by constructing an upper solution of the problem, a decay estimate for the solution is obtained

    文摘:本文討論一類源於擬靜態熱彈性力學和控制理論等領域的邊值問題，通過構造適當的上下解得到擬線性方程解的衰減估計
  11. Compared with the static model in errors, dynamic degrees and response curves, dynamic model is better. when voltage is above 0. 6 pu, the karlsson - hill model is suitable. when below, with air conditioner stalled, a new subsection model is established

    先分析比較靜態模型和動態模型，通過辨識的誤差、動態程度d以及響應曲線分析，發現採用動態模型更為合適； u 0 . 6u _ n時採用karlsson - hill模型； u 0 . 6u _ n時空調停機，構造一分段的模型，結果表明該負荷模型可以很好的擬合空調的動態響應。
  12. The static loads were placed step by step in time sequence in order to simulate the construction conditions of the dam during the calculation. the results of the analysis show that excess pore water pressure would not appear in the design section during the analysis results that the dam was statically stable and the construction process was reasonable

    在靜力分析過程中採用在時域上逐步加載的方法，模擬了壩體的施工填築過程，計算結果表明，設計斷面在貯灰過程中不會產生很高的超靜孔壓，壩體靜力穩定狀態較好，施工進度合理。
  13. This thesis is devoted to studying those issues relevant to the interaction of ultra - short ultra - intense laser pulses with overdense plasmas, including the generation and transport of relativistic electron beams, the generation of quasistatic magnetic field, the energetic ions production, and the influence of preplasma on electrons acceleration

    本文的研究目的是：利用粒子模擬方法，對超短超強激光脈沖與高密度等離子體相互作用中高能強電流的產生和輸運、準靜態磁場產生、高能離子產生等物理過程進行研究。
  14. This new method can simulate the process states of visual display unit in actual scene, and would help designers improve the design level from static state up to dynamic simulative state

    模擬視覺顯示器實際現場過程狀態，將有助於設計者在設計時，由靜態性設計提高到動態模擬性設計的水平。
  15. Therefore, the paper establishes the parallel computing platform and meets the demand of computing resources for large eddy simulation. it also studies the integration of cad / cam, grid generation system and cfd system, and brings the model computed in the paper into this system. on the bases of systematical and thorough numerical simulation researches in circular cylinder and the compares between instantaneous piv metrical results and numerical results of circular cylinder, the paper obtained some problems and several conclusions which should be noticed in les for making correct computatioa finally, by using these experiences and conclusions above and by putting them into an actual problem in engineering - optimized numerical simulation of static mixer, this paper achieved the turbulent high - level numerical simulation technique, i. e., system atical attempt in engineering application by les method

    為此，搭建了微機并行計算平臺，解決了大渦模擬對計算資源要求；對cad cam 、網格生成與cfd系統集成進行研究，並將論文中所要計算的模型納入到此系統內；在對圓柱繞流問題進行了系統和深入的數值模擬研究和對圓柱繞流瞬態piv測量結果與數值計算結果進行比較工作基礎上，得到大渦模擬方法正確計算所需要注意問題和若干結論；最後利用以上得出的計算經驗和結論，通過對一個實際工程問題? ?靜態混合器優化的數值計算，完成了cfd中湍流高級數值模擬技術? ?大渦模擬方法工程應用的系統嘗試。
  16. Finite element simulation in sheet metal deep drawing process based on static implicit method

    板料深沖成形過程的靜態隱式有限元模擬
  17. Through static assembly analysis, the assembly tolerance design could be verified and the tolerance accumulation effects to the product assembliability would be evaluated ; through dynamic assembly analysis, the product assembly process would be planned and simulated to ensure the product has feasible assembly sequence and non - interference assembly path

    通過靜態分析，對裝配體的公差設計進行驗證，分析公差累積效應對產品可裝配性的影響；通過動態分析，對產品的裝配過程進行分析與模擬，確保產品具有合理的裝配順序與無干涉的裝配路徑。
  18. 4. conclude and verify detailedly attitude algorithm and conical scan control algorithm in process of initial alignment. on the base of static initial alignment technology, reach the dynamic initial alignment technology used on moving carrier

    四、對在初始對準中採用的姿態解算和圓錐掃描控制演算法進行了詳細的理論推導和模擬驗證，然後在靜態初始對準的基礎上，引出了用於載體移動過程中的動態初始對準。
  19. Realizes the longitudinal relationship between models by using object - oriented programming language ; 2 ) sets forth the function and software design in detail, and analyzes entities of the system. realizes the randomness of traffic flow and constructs vehicle arriving model, vehicle movement model on road segments and vehicle movement model on intersections, so completes the kernel part of traffic simulation ; 3 ) uses 3d modeling software - multigen creator and real - time simulation software - vega to build up the 3d virtual environment of microscopic traffic simulation, and drives dynamic entities such as driver - vehicle units and traffic lights in static scenes ; 4 ) studies the characteristic of checkerboard system of street layout, analyzes and decomposes the system to deduce a certain simplification method. and researches the application of urban traffic route choice

    論文主要工作如下： 1 ）利用面向對象技術分析交通模擬系統模型之間的橫向關系和交互作用，研究靜態實體的狀態變化和動態實體的運動規律；利用面向對象的程序設計語言實現系統中模型的縱向關系； 2 ）詳細闡述交通微觀模擬系統的功能設計、軟體設計，分析模擬系統中的實體；實現車流的隨機性，建立車輛的到達、車輛在路段上的行駛過程、車輛通過交叉口的行駛過程等模型，完成交通模擬的核心內容； 3 ）利用三維建模軟體multigencreator和實時模擬軟體vega建立交通狀態微觀模擬的三維虛擬環境，在靜態視景中驅動駕駛員-車輛單元、信號燈等動態實體； 4 ）研究棋盤式道路格局的特點，從理論上分析並分解系統，得到一定的簡化依據，進一步研究城市交通路線選擇的應用。
  20. We first give an analysis of the whole system and its requests for memory management then we design and implement the memory management strategies of rtos for this chip, including the paged virtual memory management mechanism without swap, the memory protection, the memory sharing and the static / dynamic memory allocation mechanism. chapter 4 describes the simulation method of the memory management strategies implemented in the previous chapter, then we analyse the results of the simulation

    首先對系統進行了分析，得到其對操作系統的存儲管理的具體要求，然後針對上面提出的需求，設計並實現了相應的存儲管理策略，包括分頁不交換的虛擬存儲機制、存儲保護、存儲共享以及內存的靜態動態分配機制，最後介紹了在本系統研究和實現過程中用到的幾個工具軟體。
分享友人
分享到 Line

分享到臉書