數值網格生成 的英文怎麼說

中文拼音 [shǔzhíwǎnggéshēngchéng]
數值網格生成 英文
numerical grid generation
  • 數 : 數副詞（屢次） frequently; repeatedly
  • 網 : Ⅰ名詞1 （捕魚捉鳥的器具） net 2 （像網的東西） thing which looks like a net 3 （像網一樣的組織或...
  • 格 : 格象聲詞rattle; gurgle
  • 生 : Ⅰ動詞1 （生育; 生殖） give birth to; bear 2 （出生） be born 3 （生長） grow 4 （生存; 活） live;...
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  • 數值 : numerical value; numerial number; figure; magnitude; value數值表 numerical tabular; 數值天氣預報 ...
  • 網格 : cancellus
  • 生成 : create; generate; produce生成演算法 generating algorithm; 生成文法 generating grammar; 生成物 pro...
  1. In 3d geodynamics numerical simulation research, it is often required to mesh the whole earth or part of the spherical shell, and the size of mesh is much more important to our research

    摘要在研究大尺度的三維地球動力學問題的數值模擬過程中，往往需要對整個球體或部分球殼生成計算網格，而且網格單元的尺寸對所研究的問題尤為重要。
  2. It is indicated that the grids generated by the proposed method are simple, high quality and suitable for different building shapes, and the results of numerical simulation agree well those of the wind tunnel test

    網格剖分和數值模擬結果表明，採用本文方法生成的網格格式簡單，網格質量高，適應性強，適用於多種體型建築物的模擬計算，並且風場模擬結果與風洞試驗結果有較好的吻合。
  3. It is showed that numerical calculation could give the same position of separation line with the cold gas simulation. however, numerical simulation result is of a little deferent from cold gas simulation in some details, such as recirculation velocity and turbulent intensity. the main problem of numerical simulation is that the turbulent model is not perfect, and the computational grid is not precise enough

    利用實驗結果對數值模擬的準確性作了檢驗和評價，結果表明數值模擬能給出與實驗結果一致的分離線位置，但在某些流動細節上還有差別，如迴流速度大小和湍流度等，數值模擬中存在的主要問題是湍流模型不夠完善和網格生成不夠精細。
  4. The numerical simulation of axisymmetric two - dimensional shock tube is studied, which has a conical convergent section, and its driving gas is the hot product of hydrogen oxygen detonation. finite volume tvd scheme is adopted and the mesh is local orthogonal. the primitive equations are euler s equations of multi - component flow. the new method of eliminating numerical oscillation at the interface of two materials is extended to two dimensions. the mechanical character of this shock tube is analyzed

    對由前向爆轟產生驅動氣體並具有局部錐形收縮截面的軸對稱激波管利用兩相常比熱完全氣體的歐拉方程組和有限體積tvd格式在局部正交的網格上進行了二維數值模擬。將消除兩種介質界面處數值振蕩的新方法成功地推廣到二維情況。分析了該激波管的力學特性。
  5. Because 3d surface model contains huge number of triangles, a mesh simplification algorithm based on triangle edges shrinkages is presented in this paper to speed up the rendering in real time. in chapter four, the cutting of reconstructed 3d models is explored. in order to observe expediently the size and interspaces structure of inner tissues and avoid the discommodiousness of surface reconstruction, a simple cutting methods based on ray - casting algorithm is presented to get the inner images information

    第三章主要對marchingcubes （ mc ）表面重建演算法進行描述， mc演算法是基於規則體數據抽取等值面的經典演算法，本文實現了這種等值面構建表面模型的演算法，並對其演算法的二義性進行了相應的處理；針對其重建速度較慢的問題，提出了體素間相關性處理的方法來加快重建速度；並對其生成的表面幾何模型所包含三角面片數量巨大的問題，提出一種快速有效的三角形邊收縮演算法進行網格簡化，提高了表面模型的繪制速度。
  6. The numerical algorithm of solving the adjoint equations for different design cases have been developed by using finite volume methodology which is usually used to solve the flow governed equation. it includes the some important aspects, such as flux formulation, wall and far - field boundary treatment methodology, dissipative term formulation, etc. after the solution of the adjoint equations is obtained, the derivatives of the cost function with respect to all the design variables can be evaluated with the same operation. this can yields a significant saving over the other gradient - based techniques when there are many design variables

    （ 3 ）進行了應用控制理論和三維歐拉方程的機翼氣動反設計研究，以及有升力約束情形下機翼跨音速減阻問題研究，分別推導了相應的共軛方程及邊界條件數學表達形式，研究與發展了三維共軛方程的有限體積數值求解方法，及相應梯度公式的數值求解方法，通過對計算網格生成、流場計算、共軛方程數值求解、梯度求解和優化演算法等多方面的有效結合，成功發展了三維機翼的氣動反設計和跨音速減阻優化設計程序，成功地進行了多個設計算例研究。
  7. Applying spatial interpolation and data topographty model, realizes that isoline data create grid data, forms surface and makes three - dimensional geological body, according to the actual demands in oil and gas field development

    運用空間插值、數字地形模型等方法，根據油氣田開發中的實際需要，實現由等值線數據生成網格數據，形成構建表面，最終得到三維地質體。
  8. In chapter two and chapter three, this paper discusses the tracking and building of isolines from two aspect, regular grid data and random discrete data

    文中第二章和第三章從規則格網數據和任意離散點數據兩個方面討論了等值線的追蹤與生成。
  9. In addition, for regular grid data it presents an effective algorithm for some particularity that there are four isopoints in one grid cell and for random discrete data points it lays emphasis on triangulation. this paper firstly put forward three principles : attribute principle of adjoining isolines, attribute principle of isoregions and inclusion principle of ioslines after studying the character of isolines. the bivalue - topology algorithm based on boundary tracking is given, which is founded on the three principle and is used to fill isoregions

    另外，在這兩部分中除了對邊信息鏈表的形成過程以及基於邊信息鏈表的等值線生成做了詳細討論外，還對規則格網數據的等值線追蹤中，一個網格單元上含四個等值點的特殊情形給出了一個比較有效的演算法，並在任意離散點數據部分對平面點集的三角剖分進行了著重討論。
  10. Firstly, there is a full discuss of space aircraft thermal control. the background of the research for this paper is also presented here, in chapter 2, there is a complete discussing of fem realization in numerical heat transfer, including delaunay grids generation and display, two - dimension temperature field function eduction and collectivity compound

    首先全面論述了航天器熱控制和熱分析的基本內容，指出本課題產生的工程背景。在第二章中完整地論述了有限元數值計算方法在解決傳熱問題中的實現，包括delaunay網格的生成與顯示，二維溫度場泛函的推導和溫度場的總體合成等。
  11. It realized the spatial interpolation software grounded on geostatistics seamlesslly integrated with the system using the way of oop and the technology of ole / activex based on com. using vector - grid spatial - overlap analysis to solve the limitation of the grid and general vector data structure in the course of creating prescription, it made fertilizer prescription founded on the main factor of soil nutrient and yield - target. also it effectively integrated comgis with exper t system using the technique of loose coupling

    以面向對象的設計方法為基礎，利用「組件對象模型」基礎上ole / activex技術實現基於地統計學的空間插值軟體實現及與施肥處方系統的無縫集成；應用基於矢量網格的空間疊加分析方法解決柵格和常規矢量數據結構在處方生成中的局限，生成了基於土壤養分和目標產量為主要因素的施肥處方；利用鬆散耦合技術將comgis與施肥專家系統進行有效集成；充分考慮施肥機對施肥處方數據結構要求，在wgs - 84坐標系下採用具有柵格單元的矢量施肥處方。
  12. On the base of analysis of hydrologic geology from aquifer distribution, boundary conditions and dynamic characters etc. in the research area, the paper sums up the hydrologic geologic condition, builds up the conceptual model of groundwater resource evaluation and presents 2d calculation model, as well as numeric solution and computing flow chart. after introducing general solutions of mathematic models and implementation method of rectangular grid, the paper realizes the automatic technique of spatial dispersion rectangular grid of evaluation models based on gis. finally, the paper fulfills the integration of gis with groundwater resource evaluation models from gis - based basic management information, spatio - temporal dispersion of models, definition of subprogram and visual evaluation of parameters, as well as models simulation etc., and visualizes the results of evaluation models

    論文以地下水超采?地下水降落漏斗?地面沉降現象較為嚴重的常州、武進地區作為研究評價區域，在對評價區域的含水層分佈、邊界條件和動態特徵等水文地質條件分析的基礎上，概化了其水文地質條件，構建了相應的地下水資源評價概念模型與數學模型，並給出其數值解法和相應的計算流程；論文在介紹數學模型的兩種常用數值解法和模型空間離散的矩形網格生成技術的基礎上，實現了基於gis的評價模型空間離散矩形網格的自動生成；最後，論文從基於gis的評價模型基本信息管理、模型空間時間離散方法、子程序包與模型計算參數可視化賦值、模型的擬合等方面實現了gis與評價區域的地下水資源評價模型的集成，並將模型評價結果可視化。
  13. 3. a hybrid grid method is described which combines structured grids with unstructured triangular and cartesian tree grids to provide great flexibility in discretizing a domain. according to this idea, computational grid of n - s equations solution is generated, which greatly extend the ability of the cartesian grid

    基於結構非結構混合網格方法，利用三角形非結構網格、結構化網格和直角切割網格的各自特點和優勢，生成了適用於navier - stokes方程求解的計算網格，拓展了直角切割網格在復雜流場數值模擬中的適用范圍。
  14. Numerical grid generation

    數值網格生成
  15. Grid generation is one of the key problems in cfd and the numerical generation technique using partial differential equation is widely used and frequently studied, one of which elliptic equation in common use

    網格生成技術是cfd中極為關鍵的問題之一，偏微分數值網格生成技術是目前應用和研究較多的網格生成方法，其中應用較多的是橢圓型網格生成方法。
  16. Therefore, the paper establishes the parallel computing platform and meets the demand of computing resources for large eddy simulation. it also studies the integration of cad / cam, grid generation system and cfd system, and brings the model computed in the paper into this system. on the bases of systematical and thorough numerical simulation researches in circular cylinder and the compares between instantaneous piv metrical results and numerical results of circular cylinder, the paper obtained some problems and several conclusions which should be noticed in les for making correct computatioa finally, by using these experiences and conclusions above and by putting them into an actual problem in engineering - optimized numerical simulation of static mixer, this paper achieved the turbulent high - level numerical simulation technique, i. e., system atical attempt in engineering application by les method

    為此，搭建了微機并行計算平臺，解決了大渦模擬對計算資源要求；對cad cam 、網格生成與cfd系統集成進行研究，並將論文中所要計算的模型納入到此系統內；在對圓柱繞流問題進行了系統和深入的數值模擬研究和對圓柱繞流瞬態piv測量結果與數值計算結果進行比較工作基礎上，得到大渦模擬方法正確計算所需要注意問題和若干結論；最後利用以上得出的計算經驗和結論，通過對一個實際工程問題? ?靜態混合器優化的數值計算，完成了cfd中湍流高級數值模擬技術? ?大渦模擬方法工程應用的系統嘗試。
  17. Finite difference method can deal with regular boundary conditions. in this paper, we discrete the water domain into rectangular meshes, and simulate the propagation, reflection and diffraction of water waves. we just specify waves source, the movement of water waves can be simulated automatically

    有限差分方法能夠處理具有規則邊界水域的水流現象，在本文中，我們把求解的水域離散成結構矩形網格，對水流的折射、反射、繞射等水流現象進行了動畫模擬，我們僅僅指定產生水流動畫的波源，水流動畫的細節均由數值方法產生，不需要人工的干預。
  18. Finite volume method can deal with irregular boundary conditions. in this paper, we discrete the water domain into triangular meshes, and simulate dam breaking, water droplets. the same as finite difference method, we just specify waves source, the movement of water waves can be simulated automatically

    有限體積方法能夠處理具有不規則邊界水域的水流現象，在本文中，我們把求解的水域離散成無結構三角形網格，對潰壩問題、雨景等水流現象進行了模擬，和有限差分方法一樣，我們僅僅指定產生水流動畫的波源，水流動畫的細節均由數值方法產生，不需要人工的干預。
  19. In this paper, in order to find the approaches to reduce the drag levels and enhance the lift - drag ratio for grid fin, the aerodynamic characteristics of the grid fin are calculated with tvd finite volume scheme and wind tunnel tests. according to the complex flow field, a curve - long parameter grid generation technique is applied, and the density of the grid is processed

    為適應復雜流場的數值計算，對網格生成方法進行了研究，採用弧長網格生成法進行貼體網格生成，並對網格進行了加密處理，使物面附近網格盡量密些，而在遠場使網格盡量稀疏些。
  20. Firstly, the theory and characteristic of comgis is studied. secondly, the key techniques, such as map digitalization, autocad dxf file conversion, computational gridding, methods for interpolation, the 3d terrain visualization, and the results correction, are introduced. and lastly, a framework on numerical modeling is implemented and applied in a practical research work on coastal engineering

    本文首先介紹了組件式地理信息系統的原理和特點；接著重點討論了前處理過程中各種關鍵的技術，包括地圖數字化技術、數字地圖數據讀取方法、計算網格生成技術、插值方法的選取、地形可視化技術以及計算結果修正方法等；最後本文提出了前處理系統的設計框架，並結合一個海岸動力數值模擬的研究實例，討論了前處理系統的具體應用。
分享友人
分享到 Line

分享到臉書