數控銑刀 的英文怎麼說

中文拼音 [shǔkòngxiǎndāo]
數控銑刀 英文
cnc milling cutter
  • 數 : 數副詞（屢次） frequently; repeatedly
  • 控 : 動詞1 （告發;控告） accuse; charge 2 （控制） control; dominate 3 （使容器口兒朝下 讓裏面的液體慢...
  • 銑 : 銑名詞[書面語] （最有光澤的金屬） bright metal
  • 刀 : Ⅰ名詞1 （切、割、削、砍、鍘的工具） knife; sword 2 （形狀像刀的東西） sth shaped like a knife 3 ...
  1. Disigning coolant channel on the firebox of liquid rocket engine to loxodrome ( equal - angle helix ) groove can improve firebox coolant capability greatly. because the width dimension of loxodrome groove is narrow and the depth is deep, some machining methods are incapable, such as end - milling or electrochemistry. according to the peculiarities, a cnc disk - cutter - milling method which is composed of five motion axes with four simultaneously interpolated ones is researched. because most firebox generatrix is composed of complex curves, it is very difficult to get cnc cutting program with manual means. in order to deal with the problem, the loxodrome mathematics model is studied, and an auto - programming software system is developed. the software system can generate cnc cutting program of loxodrome on many kinds of turned surface. the constriction - distension segment of firebox is the most representative workpiece. the sharp changing of its generatrix slope makes loxodrome milling difficult. with the theory analyzing and practice cutting experiment, some applied techniques, which include milling mode and direction, choosing cutter diameter and cutting start point setting, are developed. adopting the technology above, tens regular workpiece have been manufacturing. the two - year manufacture practice has confirmed the validity and feasibility of developed loxodrome coolant channel milling method. the developed technology is also worth to be referenced to other similar workpiece

    將液體火箭發動機燃燒室的冷卻通道設計為斜航線（等傾角螺旋線）槽形，可以大幅度改善燃燒室的冷卻性能.斜航線冷卻槽的槽寬尺寸較小而槽深尺寸較大，所以無法使用棒銑刀銑削、電化學等加工方式.針對這些特點，提出了五軸控制、四軸聯動的數控片銑刀銑削加工方法.由於燃燒室外表面的母線輪廓復雜，手工編制數控加工程序難度大.為了解決數控加工程序的編制問題，研究了斜航線的數學模型，開發了自動編程軟體系統.使用該系統，可以生成多種母線輪廓回轉體外表面上的斜航線數控加工程序.燃燒室收斂-擴張段的母線斜率變化大，加工難度大，是斜航線冷卻通道加工的最典型工件.經過理論分析和實際切削實驗，研究了針對該類型工件的片銑刀直徑選擇、銑削方式和方向、刀具調整和起刀點的設置等多項實際的加工方案.採用上述的一系列技術，已經成功地加工了數十個合格工件.經過兩年多的實際生產過程應用，驗證了所開發的斜航線冷卻通道加工方法的正確性和可行性.這些加工技術的研製成功，對其他相似類型零件的加工亦具有參考意義
  2. Our products ( “ aa ” brand ) consist of milling tools, thread tools, turning tools, holders for cnc, tools made from hssco and various non - standard cutting tools

    哈申公司生產的「 aa 」牌刀具包括：銑削刀具、螺紋刀具、車削刀具、數控刀具工具系統，以及各類高性能高速鋼刀具和各種非標刀具。
  3. The selection of nc mill machining tools and feed - paths

    數控銑削刀具及進給路線的選擇
  4. System software is designed and programmed in chapter 4, including the analyses and researches on software structure, module of vital manage, module of tool compensation and module of interpolation

    第四章研製了計算機高速數控雕銑系統控制軟體，包括控制軟體結構、主要管理功能、刀具補償功能、插補功能的分析和實現。
  5. A diagnostic method for tool breakage of nc millingmachine based on vibration signals

    基於振動信號的數控銑床刀具破損診斷方法
  6. Firstly we discussed and determined the feature of turning and milling process, based on which we set up the knowledge rules of the turning cutting tool and milling cutting tool choice. we applied the knowledge rules to the expert system of nc machining process parameters repository, which realized the cutting tool choice of nc machining. we also added the explaining implements of turning and milling tool and perfected the expert system of nc machining process parameters

    首先研究確定了車削加工和銑削加工的加工特徵；在此基礎上，建立了基於加工特徵的車刀選擇知識規則和銑刀選擇知識規則，並將其知識融入到已研製開發的數控加工工藝參數優化專家系統知識庫中，實現數控刀具的優選；本文還增加了車刀選擇解釋器和銑刀選擇解釋器，完善了數控加工工藝參數優化專家系統。
  7. In this thesis the problem of low efficiency in blade ' s manufacture is solved based on one new nc scheme : spiral machine. the technics control parameters and track - making algorithm during blade ' s spiral machine are designed in detail. multi - coordinates tool point calculating formulas are deduced, which can be used in multi - kind control parameters

    本文基於螺旋銑新工藝方案有效的解決了葉片數控加工中的效率低下問題，詳細設計了葉片螺旋銑多坐標加工中的工藝控制參數和軌跡生成演算法，推導出適用於多種控制參數的螺旋加工編程的多坐標刀位點計算公式。
  8. In this thesis, a internal and external analyse and research about design, modeling and machining of ball - end cutters is reviewed. on the base of grinding trait of mk6335a five - axis numerical control drill grinder, in the present study, differential geometry, ruled surface concept, envelope and inverse - envelope theory, coodinate transfer and numeric analyse are used to develop a mathmatical model and systematic method for the design, analyse and simulation of ball - end cutters

    本論文在國內外關于球頭立銑刀設計、建模、加工等方面研究的基礎上，根據現有的mk6335a五軸數控鉆尖磨床刃磨運動的特點，應用微分幾何、包絡與反包絡理論、坐標轉換、數值分析等理論知識，研究了基於五軸數控磨床加工球頭立銑刀的數學模型及分析與模擬。
  9. An important feature of cad / cam in machining operations is its ability to describe tool paths in operations such as nc turning, milling, and drilling

    在機床操作中cad / cam系統的一個重要特徵是它描述刀具諸如數控鏇制、銑、鉆之類的路徑。
  10. This dissertation integrates theory analysis with experiment research and makes further research on nc geometric simulation. the establish of the cutting forces model, cutter wear model, machining error predition and compensation, machining parameter optimization in the physical simulation fields are made more research on the basis of the above research contents. the main achievements are as follows : 1

    本文採用理論分析與實驗研究相結合的思路，進一步研究了幾何模擬與精度驗證技術，研究了銑削力模型的建立、刀具磨損模型的建立、加工誤差模型與誤差補償技術、基於加工模擬的加工參數優化等物理模擬關鍵技術，主要研究內容和成果如下: 1 .設計了集幾何模擬和物理模擬為一體的數控加工模擬系統的體系結構。
  11. This paper emphatically researched the problem how to calculate the intersection point between workpiece that rotated with variational angle velocity and milling cutter that moved with complicated track and rotated with high speed. furthermore it adopted the discrete curve surface method for every milling cutter, and treated image frame as the control parameter of position of milling cutter during the intersection calculation process, so the algorithm of intersection between workpiece and milling cutter was obtained. the paper also discussed further three - dimension graphic problem of manufacture process

    文中對做變角速度運動的工件和運動軌跡復雜的高速自轉中的銑刀求交問題進行了重點研究，採用將銑刀上的每個刀尖劃出的曲面離散化的方法，以圖像顯示的幀數作為求交計算過程的銑刀位置的控制參量，得出了銑刀與工件的求交演算法。
  12. Calculation of cutter - location and error analysis in numerical control flank milling of twisted ruled surface impeller

    任意扭曲直紋面葉輪數控側銑刀位計算與誤差分析
  13. Secondly, based on cutting edge geometric model and machining mode of mk6335a grinder, the rake face with constant normal rake angle and flank face with constant orthogonal clearance angle models of ball - end cutters are discussed. the cutting geometry angle parameters are solved and analyzed. moreover, the tool paths models of wheel which grinding are builded and the post - processing technique for coordination transfer is studied

    然後，基於刃口曲線模型、五軸數控磨床刃磨運動方式和微分幾何的直紋面概念，本文推導與建立了具有等法前角的前刀面和具有等主后角的后刀面的球頭立銑刀數學模型，並對球頭立銑刀的刀具角度如刃傾角、主前角、法后角、主偏角等參數進行了求解與分析。
  14. In the milling forces simulation model, the algorithm to identify the engaging cutting edges is proposed using z - map simulation model in ball - end milling process. the expression of instantaneous chip thickness is discussed by analyzing the effect of cutter eccentricity and deflection. then ball - end cutter milling forces simulation model is established on the basis of the relationship between milling forces and chip load

    3 .在球頭銑刀銑削力建模和模擬方面，基於z - map模型，提出了識別球頭銑刀數控加工中參與切削的切削刃單元的peem方法，建立了球頭銑刀銑削力模型，同時根據單刃切削條件，提出了確定刀具偏心參數的方法，開發了考慮刀具偏心和刀具變形的球頭銑刀三軸加工過程的模擬系統。
  15. The paper puts forward a kind of economical numerical control milling machine system which is supported by windows and industry pc that are acted as software and hardware platform on the base of analyzing the present development of economical numerical control system and some existent problem, and expatiates the system software ' s collectivity frame, also introduces detailedly form and operational way of the user ' s interface. besides, the thesis also frames and accomplishes each module such as syntax inspect module, translation module, tool compensation module and track interpolation module adopting visual c + + 6. 0 and the kind of facing object and modularized program design method by analyzing rationales and function of the software ' s modules, moreover presents the programmer ' s flow chart and parts of source code, whereafter validates arithmetic of translation and tool compensation by simulating process testing program

    本文在分析了我國經濟型數控系統的發展現狀以及目前存在的一些問題的基礎上，提出了一種以windows和工業pc機作為軟、硬體平臺的經濟型數控銑床系統，闡述了該系統軟體的總體結構，並對其用戶界面的組成及其操作過程做了較為詳細的介紹，分析了軟體的各個模塊的基本原理和功能，採用visualc + + 6 . 0以及面向對象、模塊化的程序設計方法，完成了語法檢查模塊、譯碼模塊、刀具補償模塊以及軌跡插補模塊的具體設計，並給出了程序設計流程圖和部分源代碼，通過系統的模擬程序模擬加工過程驗證了譯碼和刀補演算法的正確性。
  16. This thesis studies the algorithms of the tool path generation for nc milling

    本文主要研究在通用數控銑床上加工直齒圓錐齒輪模具電極的nc刀軌自動生成演算法。
  17. Virtual manufacturing models for 2 - axis nc machining of ball - end milling cutters

    二軸聯動數控加工球頭銑刀的虛擬製造模型
  18. When the instructions of compensation for the tool radius are put to use flexibly, it can simplify nc program and assure the quality of the part that is made on the nc milling machine

    摘要介紹在數控銑床上靈活使用刀具半徑補償指令，可使數控編程簡單化，保證被加工零件的質量。
  19. This jv invested rmb 10million in manufacturing plc controlled hot - rolling production line to produce blank of inlay knife

    其中包括從德國進口的可加工6米長刀片的平面刀口磨床、數控鉆銑床和從法國進口可減少熱處理變形的壓力淬火機。
  20. In this paper, the machining characteristic in five - axis wedm machine for pcd woodworking milling cutters and the mechanical structure and control system of increased cnc dividing rotor were introduced, and the hardware and software constitutes in this numerical control system of wedm machine were studied

    摘要介紹了五軸金剛石木工銑刀線切割機的加工特點以及新增數控分度回轉軸的機械結構和控制系統，並研究了該線切割機數控系統的硬體和軟體構成。
分享友人
分享到 Line

分享到臉書