數據整理法 的英文怎麼說

中文拼音 [shǔjùzhěnglǐfǎ]
數據整理法 英文
data reduction method
  • 數 : 數副詞（屢次） frequently; repeatedly
  • 據 : 據Ⅰ動詞1 （占據） occupy; seize 2 （憑借; 依靠） rely on; depend on Ⅱ介詞（按照; 依據） according...
  • 整 : Ⅰ形容詞1 （全部在內; 完整） whole; all; complete 2 （整齊） neat; tidy; orderly Ⅱ動詞1 （整理; 整...
  • 理 : Ⅰ名詞1 （物質組織的條紋） texture; grain （in wood skin etc ） 2 （道理;事理） reason; logic; tru...
  • 法 : Ⅰ名詞1 （由國家制定或認可的行為規則的總稱） law 2 （方法; 方式） way; method; mode; means 3 （標...
  • 數據 : data; record; information
  • 整理 : arrange; put in order; reorganize; sort out; straighten out; tidy; trim
  1. It emphasizes particularly on strategic data planning and absorbs a lot of experiences from information resource management and data administration. it also combines practice of many large or medium domestic information construction projects. then it has developed a complete set of system including theory, method and tools by the principle of science, brachylogy and practicality

    信息資源規劃源於信息工程方法論，側重於戰略和總體上的數據規劃，並大量吸收信息資源管理和數據管理等諸多方面的理論和經驗，同時結合了國內許多大中型信息系統建設項目的豐富實踐，本著科學、簡明並實用的原則，發展成為理論、方法和工具相結合的一整套體系。
  2. Abstract : in this paper, the formal definition of composite objects was presented. semantics of composite object was specified and related to object - oriented concepts. then the semantics, creation and deletion of composite object were illustrated in terms of schema definition, which shows the integration of composite objects. meanwhile, the approach of implementing composite objects, including enforcement of the semantics of composite objects and its physical clustering, was also indicated

    文摘:把復合對象和面向對象的概念聯系起來，在復合對象的形式定義后，指定復合對象的語義，然後根據模式定義來說明復合對象的語義，以及復合對象的創建和刪除.展示了復合對象數據整體性.同時還指出了實現復合對象的方法，包括復合對象語義的強制和物理聚集
  3. China has a vast population and a broad market, thus liquor consumption owns a considerably potential market in china. however, due to the intence yet disorder competition of the present market, the marketing of the liquor industry in china has fallen into an rather awkward dilemma. the hidden trouble, the lurking danger, cause the businessmen in this line unable to extricate themselves from a low - leveled ricious competitive cycle. such severe challenge also confronts yuechitequ company. therefore, the most urgent problems waiting for resdring lie in how to take advantage of the present resoures effectively, how to distinguish the market situation, and how to institute a scientific product - popularizing programme in order to keep the enterprise standing undefeated in the intense competition, and develop the enterprise rapidly, favorably. this thesis makes a thoughtful analysis about the external conditions of market and internal ones resources in the yuechitequ by means of inrestication through questionaire and scientific data processing. in the second part, with the application of stp system theory of marketing and new - product - pricing theory, it designs and further expounds the popularization of the new products of this company, then forms a excutable performance and makes a constant rerision via market practice. in this way can it explor a suitable road to popularize the products in the liquor market, help the enterprise to free from the difficulties and progress healthely, consitently

    本文通過在岳池特曲公司現有產品市場進行問卷調查，運用科學的數據處理方法對所回收的658份問卷統計分析，以及利用美國哈佛大學商學院著名教授邁克爾?波特（ michaelporter ）提出的五種力量模型和價值鏈與vrio分析理論，對白酒市場的公開數據細致分析，以明確四川省岳池特曲酒業有限公司實施新產品市場推廣所面臨的市場條件和內部資源條件，在此基礎上，本文運用市場營銷學中stp系統理論、新產品定價理論等，對岳池特曲公司推出的白酒新產品進行市場細分、確定目標市場和市場定位，並根據市場營銷4p理論制定新產品的產品策略、價格策略、渠道策略、市場促銷推廣策略，形成最終整體完善的可執行方案，再通過市場實踐對推廣方案進行檢驗、修正，力圖在酒類市場中探索一條新產品市場推廣的適用道路，並幫助企業擺脫困境、邁開步伐、持續健康的發展。
  4. In knowledge and economic time, the life - or - death relationship between enterprises is replaced by win - win strategy cooperation relationship between supply chains. supply chain meets the quickly changeable demands of markets and customers with faster and more flexible agile methods. this paper addresses supply chain information - flow model based on eim ( enterprise integrated model ) and builds the overall criterion of enterprise data resource and the methods of data resource processing after analyzing the disadvantages of information share and information integration in traditional supply chain

    本論文針對知識經濟時代，企業之間競爭博弈關系已經被供應鏈之間雙贏的戰略合作夥伴關系所代替，供應鏈以敏捷方式滿足市場和顧客的快速變化需求的特點，在分析傳統供應鏈存在信息共享和信息集成缺陷的基礎上，提出基於企業整體模型的供應鏈的信息模型，建立企業數據資源和數據資源處理方法的全局規范，解決數據冗餘和數據處理方法優化等問題。
  5. Questionnaire method and three questionnaires have been applied in this research, including two translation questionnaires " achievement goal orientation questionnaire ", " learning strategy questionnaire ", and self - compiled " class motivation climate questionnaire ". this survey consists of four stages which is item evaluation, pretesting, test and statistical analysis, had researched eight classes of 7th grade and 11th grade in three middle schools

    本研究採用問卷調查法，使用翻譯修訂的「成就目標定向」和「學習策略」問卷以及自編的「班級動機氛圍」問卷，經過問卷評估、預測與修改、正式施測、數據整理與統計分析等階段，於2003年11月至2004年5月完成對武漢市第26中學、馬房山中學和武漢市旅遊學校初一、高二兩個年級8個班學生的研究。
  6. Puts forward an improved method based on the theory in which the enthalpy difference is considered as the driving force in heat transfer under wet cooling conditions and thinks that the method can halve the testing work, require less for the experiment devices and reach higher accuracy

    認為該方法遵循了焓差是濕工況下換熱推動力的規律，試驗工作量減少一半以上，對試驗裝置的要求降低，由試驗數據整理出的公式用於表冷器熱力計算完全可以滿足空調常用范圍內的要求。
  7. 4. on original data arrangement of views, first, this paper discusses the instance of line overlap and gives the concept of hidden point, next, a method for breaking line is put forward by the means of handling two lines intersection, at the end, data check and correction is described through topological relationship between primitives and dimension set of drawing. to make a summary, from the viewpoint of practicality, the method of engineering drawing pre - processing proposed in this paper over comes traditional

    4 .在視圖原始數據整理方面，首先討論了重疊邊的分解與重構方法;然後給出了隱含點的概念，通過對二維線段相交情況的處理分析了求取隱含點的斷線演算法;最後描述了如何利用實體的拓撲關系檢查輸入視圖中的錯誤以及利用工程圖中的尺寸集來校正這些錯誤。
  8. To accept the current signal from high negative voltage circuit, the analog ground is raised to a certain positive voltage, which makes it possible for the signal amplitude to be compressed at the same time of its polarity reversion. a pi control program special for laser gyro current control is brought forward according to the conventional pid control method, in which the control signal is figured out corresponding to the difference between the sample and the reference value by turn of proportion - short step integral - long step integral. and at the end of this paper, a comparison of system performance on different conditions is made and the key elements influencing system performance are educed

    利用集成a / d 、 d / a轉換器的新型晶元aduc824 ，實現了電流（電壓）采樣?數據處理?電流控制的閉環控制結構；地電位的抬升解決了a / d轉換器對負高壓迴路電流采樣時的輸入范圍匹配問題；控制信號反相的同時進行幅度壓縮，使得輸出調整電壓的解析度提高；根據常規的比例?積分?微分（ pid ）調節模型，針對陀螺系統的特性，給出了一種可以滿足系統要求、據采樣值偏差大小進行的比例?大步長積分?小步長積分、分層次比例?積分演算法；不同條件下系統穩流性能的對比、分析在論文最後給出，並據此找出了決定該系統穩流精度的關鍵因素，提出了系統的改進意見。
  9. With this method of data processing, the whole monitoring system of power quality can be effectively applied in practical project

    通過這種數據處理方法，使整套電能質量監測系統達到工程實用的水平。
  10. And through simulated test with part of actural data on the computer, the author confirms that this kind of way is feasible, which estabilishs the base of designing the complete data treating system of cam ' s automatic test on the base of windowsnt

    提出了凸輪軸的檢測目的、檢測原理及數據處理方法，並以此為根據，初步設計並編制了數據處理軟體，採用部分實測數據在計算機上進行結果模擬，證實了這種處理方法的可行性，為進一步在windowsnt平臺上開發完整的凸輪自動檢測數據分析處理系統奠定了基礎。
  11. " misalignment error ", which is caused by misalignment during null test adjustment, together with fabrication errors is shown in test results, and it is important to separate these two errors so that the test results can be used in ccos process. asic software is developed for eliminating nonlinear error and separating misalignment error, and a high accuracy, suitable format data file is generated by asic for further analysis for ccos process

    在非球面測量技術方面，主要針對零位補償檢驗過程中測量坐標的「非線性誤差」的形成原因及其補償演算法由光學調整量引起的測量誤差以及調整量誤差的擬和方法等問題進行了討論，並編制了相應的干涉檢驗數據處理軟體asic ，干涉檢驗結果經分析、處理后能夠滿足ccos的技術要求並指導加工。
  12. In those experiments wave shapers have been utilized to modify the incident wave so that the condition of constant strain rate is satisfied more sufficiently. the effect of outer factors on the stress equilibrium of early stage in the specimen was analyzed, and the methods to improve the uniformity of stress in specimen at early stage were given. the elastic wave velocity of specimens can be determined by the wave shape fitting of the predicted transmitted wave with the measured transmitted wave at the early stage, furthermore, the shifting - time in shpb data processing can be determined

    在shpb實驗中採用波形整形技術使入射波的上升沿變寬；分析了影響shpb實驗中試件早期應力平衡的外部因素，給出了改善早期應力均勻性的方法；採用透射波的早期預估波形與實測波形作對比的方法確定了shpb實驗數據處理中的延遲時間；因而在實驗中得到了比較準確的應力應變曲線。
  13. Then the writer draws the conclusion that annual change of the patent grand period is u distribution, and sums up those factors of effecting patent grand period including patent censor system, patent action of enterprises and patent ' s economy value. in order to calculate patent grand period, the writer molds a dynamic multi - stage programming with the theories of technology innovation, marketing and game. on the basis of quantitative analysis the writer has discovered intrinsic relations between the pace of technology innovation and patent property, between cost structure and patent " economy value

    本文通過專利檢索系統進行大量的數據採集、數據整理，統計結果表明我國專利授權期年度變化呈u型分佈；總結出影響專利授權期的專利審查制度因素、企業專利行為因素和專利社會效益因素；並用技術創新學、運籌學、博弈論進行確定專利授權期的方法嘗試，把技術創新過程視為多階段動態規劃過程，把企業間的專利競爭抽象為stackelberg模型，設計出最優專利授權期模型；在對模型進行量化的基礎上，分析技術創新速度與企業獲得專利權、企業成本結構與專利社會效益之間的內在聯系。
  14. In this thesis 2 - dimension fuzzy - control system with adjustable factors was analyzed and simulated using matlab as tool of data processing. genetic algorithm was used to search for the best adjustable factors

    本論文用matlab作為數據處理工具，分析和模擬帶可調整因子的二維模糊控制系統；用遺傳演算法作為尋優演算法搜索最佳可調整因子。
  15. At last, it is tested on a three - coordinate milling machine. soft - cnc can realize the functions of cnc in high performance and high speed cnc system. with its great advantages, it will be widely used in many fields

    最後在三坐標銑床上進行了實際測試，實現了對語法分析、數據處理、插補計算、運動控制以及反饋顯示整個數據流程的控制，基本實現了機床數控的功能。
  16. In this paper, the author chooses many box girder modules with different dimension justified and analysis the modules with fem ( finite element method ). the result of fem is fitted with ga, coefficient of fitted functions can be got

    本文通過合理選擇箱梁計算模型，得出幾種模型的有限元結果，將數據整理歸類，採用遺傳演算法進行擬合參數選擇，以擬合多項式來調整剪力滯位移函數。
  17. Version management is very important in engineering data management, and is a method to maintain consistency of design data. a notion of design object is proposed, based on which the design information of product is described. the composed relation, version relation, and equivalent relation are used to establish the relation design object. a version mechanism is established in the paper for engineering data management. a hierarchical model of design object is proposed. some notions such as version history of design object, relations of version history of design object, and so on are proposed. a data model of version mechanism is established. finally, the operation ( check in / check out, selection of current version, dynamic configuration of version and so on ) of version object is analyzed

    版本管理是工程數據庫管理中的重要部分，也是保證設計數據一致性的手段.文中提出了設計對象的概念，以設計對象為基礎組織和描述完整的產品設計信息，建立了設計對象之間的組合聯系、等價聯系以及版本聯系，提出了設計對象的層次模型表示方法.針對工程數據管理的特點建立了其版本機制，提出了設計對象版本歷史、對象版本之間的聯系等概念，研究了設計對象的版本操作檢入/檢出、當前版本的選擇以及版本的動態配置等主要內容
  18. Through linear regression, experiment data is tidied to linear regression function relation. these relations can be extended to common high space. the result indicates that outlet velocity and outlet diameter have obvious effect on air distribution

    通過線性回歸法將實驗數據整理成以工作區平均溫度為因變量，以各個影響因素為自變量的一元線性回歸函數關系式，這些關系式能夠推廣到一般的高大空間。
  19. According to basic theories for distributing regular of electric field about surface single spot current source and high density resistivity prospecting method in this paper. put forward an installation which use one current electrode or dipole current electrodes and the others prospecting at the same time to realize high density resistivity method by office date processing, such as wenner pole - dipole a, wenner pole - dipole b, wenner alpha, wenner beta, wenner gamma and pole - pole array

    摘要運用地面點電流源電場的分佈規律和高密度電阻率法的基本思想，提出了分別利用單極供電、偶極子供電，其餘電極同時測量，通過室內數據整理實現高密度電阻率法的溫納對稱四機、溫納偶極、溫納微分、溫納三極a 、溫極三極b和二極等裝置。
  20. Summarize the current classical algorithms of motion estimate, present integrated experimental data and comparisons, trim and put forward some basic theories of motion estimate. 2. research motion estimate by phase correlation way, bring forward a new technique of motion estimate on the base of phase correlation

    主要工作在以下幾個方面： 1 、總結現有經典的估計演算法，給出了較完整的實驗數據和比較結果，經過實際實驗數據，整理、提出了運動估計的一些理論基礎； 2 、從相位相關的角度對運動估計進行了研究，提出了一種新的基於相位相關的運動估計技術。
分享友人
分享到 Line

分享到臉書