斜齒齒輪 的英文怎麼說

中文拼音 [xiéchǐchǐlún]
斜齒齒輪 英文
angular gear
  • 斜 : 形容詞（跟平面或直線既不平行也不垂直的） oblique; slanting; skew; bevel; diagonal; askew; inclined; tilted
  • 齒 : Ⅰ名詞1 （牙; 牙齒） tooth 2 （物體上齒形的部分） a tooth like part of anything 3 [書面語] （年齡...
  • 輪 : Ⅰ名1 （輪子） wheel 2 （像輪子的東西） wheel like object; ring; disc 3 （輪船） steamer; steamboa...
  • 齒輪 : gear [rack; toothed] wheel; （toothed） gear; wheel gear
  1. Basic tooth profile of straight and skew bevel gears

    直齒及斜齒錐齒輪基本齒廓
  2. Using vba : 3d modeling of the involute - column - bevel gear

    實現漸開線圓柱斜齒輪的三維建模
  3. In this paper, the relation between differential driven ratio accuracy and the common normal length error of cylindrical bevel wheel has been found by experimental method, which provides a efficient way for cylindrical bevel wheel manufacturer to control the common normal length error of the wheel

    摘要通過實驗研究，尋找出差動傳動比的精度與斜齒圓柱齒輪的公法線長度誤差的關系，從而為斜齒圓柱齒輪的加工提供一個可以控制斜齒圓柱齒輪公發線長度誤差的有效方法。
  4. Analyze the stresses distributing of helical gear in long direction using 3dcbem. optimize the shape of dentiform using cvm as the optimize algorithm. the result were satisfied

    作者編制了斜齒輪前處理程序，應用邊界元應力分析程序3dcbem分析了沿齒寬方向的輪齒接觸應力的分佈。
  5. Design guide for vehicle spur and helical gears

    車輛正齒輪和斜齒輪的設計指南
  6. Finite element analysis on the gear - shaft of helical gear teeth

    某斜齒輪輪軸的有限元分析
  7. A method for calculating transient temperature in helical gears

    斜齒輪非定常溫度場的計算
  8. Multi - objective optimal design of the helical gear transmission

    的斜齒輪傳動多目標優化設計
  9. Addendum modification of external spur and helical gears

    外嚙合圓柱齒輪和斜齒輪的齒頂高修正
  10. Power rating for helical and herringbone gearing for rolling mill service

    滾動研磨設備用人字形齒輪和斜齒輪傳動裝置的動力評定
  11. Shaft mounted and screw conveyor drives using spur, helical, and herringbone gears

    使用正齒輪，斜齒輪和人字齒輪的安裝在軸上的螺旋式傳送裝置
  12. Based on the ostwald - de waele equation, the leakage characteristics of power - law transmitted by helical gear pump are researched, and the leakage model of power - law in the clearence is founded, and - the velocity distributing and the leakage capacity are worked out by the boundary condition. the power loss of leakage is got through the clearence leakage capacity, and the friction power loss is attained by the velocity distributing. the mathematic calculation model

    利用冪律流體本構方程，首次對聚合物流體在斜齒齒輪泵中的漏流特性進行了研究，建立冪律流體在間隙中的泄漏模型，利用邊界條件求出速度分佈及泄漏量；由間隙泄漏量得到漏流損失功率，由速度分佈得到流體摩擦功率損失，並得到間隙最優解的數值計算數學模型，同時給出實例及數值計算結果。
  13. This enables trouble free processing of even the toughest rubber compounds

    輥驅動直接連接于螺旋斜線齒輪裝置實現，中間不經過任何傳動消耗。
  14. The following is the detail design of the pump, and a optimum mathematical model are presented to mostly reduce the helical gear pump flow pulse

    在此基礎上進行了斜齒齒輪泵的結構設計，通過建立斜齒齒輪泵齒輪的優化數學模型，優化計算出使輸出流量脈動最小的斜齒輪參數，製造出斜齒齒輪泵樣機。
  15. 2. the flux characteristics of ordinary helical gear pump are lucubrated by theory for the first time, on this condition the selective qualification of the helical gear pump is gained

    首次對普通斜齒齒輪泵流量特性進行了深入的理論研究，在此基礎上研究了全齒廓嚙合斜齒齒輪泵流量特性，首次得到了完全消除斜齒齒輪泵流量脈動的螺旋角的選擇條件。
  16. On the condition the trapping characteristics of whole profile meshing helical pump are lucubrated by theory for the first time, and the select range of the helical angle that can eliminate completely the trapping of whole profile meshing helical gear pump is also obtained

    在此基礎上，首次對全齒廓嚙合斜齒齒輪泵的困油特性進行了詳細的理論研究，得到了完全消除全齒廓嚙合斜齒齒輪泵困油沖擊的螺旋角的選擇范圍。
  17. The researchful results indicate that the flux pulse ration of ordinary helical gear pump without clearance is less than that of the gear pump with clearence under the condition that the main parameters are same, and the flux pulse ration of ordinary helical gear pump is less than that of whole profile meshing helical gear pump

    研究結果表明：在主要參數相同的情況下，普通斜齒齒輪泵無側隙時流量脈動率小於有側隙時的流量脈動率；全齒廓嚙合斜齒輪泵比普通斜齒輪泵的流量脈動略小。
  18. 4. based on the viscous hydrodynamics, the leakage characteristics of newton liquid that is transmitted by helical gear pump are researched for the aim of the least power loss, and the leakage model is founded, the mathematic models of the radial and the axial leakage are gained. at the same time the optimal radial leakage and axial leakage are got, and the numerical calculation is achieved

    基於粘性流體力學，以功率損失最小為目標，首次對牛頓流體在斜齒齒輪泵中的漏流特性進行了研究，建立了泄漏模型，分別得到了斜齒齒輪泵的徑向和軸向泄漏的數學計算模型；同時得到了斜齒齒輪泵最佳徑向間隙和最佳軸向間隙，並在此基礎上進行了數值計算。
  19. 3. the trapping characteristics of ordinary helical gear pump are lucubrated by theory for the first time, the theoretic relation of the gear rotor between the end overlap coefficient and trapping phenomenon is discussed respectively with clearence or without clearcence, and the relation of trapping volume with the rotational angle turn is also discussed. the selective range of the helical angle that can eliminate completely the trapping of helical gear pump is gained, which never appeared in literature before

    首次對普通斜齒齒輪泵的困油特性進行深入的理論研究，分別討論了有側隙和無側隙時普通斜齒齒輪泵轉子的端面重合度與困油現象之間的理論關系，以及困油容積隨轉角的變化關系，得到了完全消除斜齒齒輪泵困油沖擊的螺旋角機械科學研究院博士學位論文的選擇范圍。
  20. So the characteristics and the phenomenons of ordinary helical gear pump and the polymer gear pump are researched by theory in this paper, and the new profile of the rotor of polymer gear pump is brought forward, which is very important to the academic development and actual application of the gear pump technology

    為了改變這種局面，本文對普通斜齒齒輪泵和聚合物齒輪泵的特性均進行了深入的理論研究，並提出了聚合物齒輪泵轉子新的齒形，對于齒輪泵技術的理論發展和實際應用均具有重要的意義。
分享友人
分享到 Line

分享到臉書