材種表 的英文怎麼說

中文拼音 [cáizhǒngbiǎo]
材種表 英文
assortment table
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 種 : 種名詞（姓氏） a surname
  • 表 : Ⅰ名詞1 （外面;外表） outside; surface; external 2 （中表親戚） the relationship between the child...
  1. In order to solve the above - mentioned problems, the present invention provides a method for plating a polymer material with a metal film, which can form the film on the surface of polymer materials, which are difficult to plate by the prior wet plating method, at a relatively low cost in comparison to the dry plating method and exhibits a uniform thickness and a good adhesion of the metal film and further, shows a good reproducibility

    為了解決上述問題，本發明提供了一種給聚合物材料上鍍金屬膜的方法，用該方法可以在聚合物材料表面形成膜層，這是原來的工藝難于做到的，而且比干鍍成本低，鍍層厚度均勻，金屬膜的粘附性好，最後，還顯示出好的重現性。
  2. The composition and quantity of heterotrophic bacteria in slime biofilms formed on the surfaces of several substrates in the marine water

    幾種浸海工程用材料表面生物粘膜中異養細菌的演化
  3. The zircondri filin wtut rirconia wa prepared and the removing technology of the zirconia on the zirconium sdrices was obtalned. the methods of chemistry and magnetron sputtring plating were used in order to platc a palladium film, which is characteristic of self catalysis for hydrogen and the sole h - permselectivity on the clean rirconium sdrices prepared by the methods of electrochemitw and ( or ) high temperatur vacuum hydrgenization, which was firstly studied. the plating tedrilogy was obained and the surface modified zirconium membran was prepared

    在利用電化學法和真空高溫除氧加氫法去除了鋯表面氧化膜的基礎上，分別採用化學法、磁控濺射法兩種鍍膜技術在其表面上鍍上了一層對氫具有自催化分解、唯一選擇滲透性的金屬鈀膜，首次獲得了鋯基材膜表面上鍍鈀的制備工藝，成功制備了鋯表面改性選擇滲氫膜。
  4. This machine ' s range of application widely, include all sorts of small - typed material quality surface solidify, plate burning, light quick experiment

    該機應用范圍廣，包括各種小型材質表面固化、曬版、光敏試驗等。
  5. Imitate the old floor in the style of the ancients : adopt wood assortments such as birch, oak wood, color wood, elm to be base material, by that the manpower surface plane is sure to process the roughness handling the different in soaking various colour and lustre of forest paint, reaching

    仿古仿舊地板：採用樺木、柞木、色木、榆木等材種為基材，經人工表面刨切加工處理在浸林各種色澤不同的油漆，達到凹凸不平。
  6. The variable parameter taper equation, which was suitable to pin us elliottii plantation form changing law, was built with the sample wood datas on the basis of the research of about form shape in the tree mensuration, one - dimensional volume table, two - dimensional volume table, one - dimensional timber - produced rate table for timber assortment, and two - dimensional timber - produced rate table for timber assortment were complied based on the above

    摘要在樹干形狀研究的基礎上，利用樣木資料建立了一個適合濕地松人工林干形變化規律的可變參數削度方程，據以編制了一元材積表、二元材積表、一元材種出材率表和二元材種出材率表，這些數表經檢驗誤差較小，精度較高，可在林業生產上推廣應用。
  7. Facing the fact that there are significant differences between the tribological performances of the material surface under microscopic and macroscopic conditions and little research has been made in this respect, a measurement method for the micro - tribological performances of the material surface was suggested and a special apparatus was developed

    摘要針對微觀條件下材料表面的摩擦學特性與宏觀條件下材料表面的摩擦學特性具有很大差別而國內外在該方面研究較少的現狀，提出了一種對微觀條件下材料摩擦學性能測試的方法並研製出專用儀器微摩擦測試儀。
  8. After forming, they receive adequate surface hardness through heat treatment. such hardening is made possible by carburizing. these case - hardening steels are an important group of materials for mold cavities

    成形后，鋼經過熱處理得到足夠的表面硬度，這種硬化常通過滲碳的方式進行，這種表面硬化鋼是一種很重要的模具型腔製作材料
  9. Cell adhesion to surface of the substrate is essential to development of the anchorage - dependent cells. only after adhering to surface followed by spreading can cells develop and proliferate. most synthetic polymers used as orthopaedic matrix substitute present hydrophobicity, which may correlates to the low degree of cell attachment. modification with cell adhesion protein / peptides can be benificial to the cell adhesion on polymers and then affect the cell proliferation and differentiation. cell attachment to substrate is primarily mediated by integrins, a widely expressed family of heterodimeric surface receptors. most extrcellular matrix proteins such as fibronectin, osteopontin, collagen type i, bone sialoprotein and vitronectin contain an arg - gly - asp ( rgd ) sequence which is specific to the fixation of cell membrane receptors like integrin. the main aim of this research is to measure, assess adhesion, proliferation of rabbit marrow stromal cells ( mscs ) on the polymers coated by fibronectin, collagen type i or biotie gen, which includes : ( 1 ) biologic characteristics of rabbit mscs were observed by two types of separating method in primary culture. ( 2 ) adhesion, proliferation and differentiation of mscs cultured on polymers coated with biotiegen were assessed. ( 3 ) also, adhesion, proliferation and differentiation of mscs were assessed on plga film or porous plga substrates coated with fibronectin, or collagen type i respectively. ( 4 ) bone formation was observed on the porous plga substrates coated with collagen type i in vivo. this research aims to give new way to make novel synthetic bone with cell adhesion and high bone induction capabilities

    因此將這些蛋白包被、固定到材料表面，觀察骨組織工程種子細胞mscs細胞的粘附、生長特性是本研究的中心環節，並從以下方面進行探討： （ 1 ）採用不同原代細胞分離方法，研究其對mscs細胞的生物學特性影響。 （ 2 ）檢測基因勝肽膠對mscs細胞粘附、增殖及分化的影響。 （ 3 ）分別採用型膠原及纖維粘連蛋白（ fibronectin ， fn ）包被聚乙醇酸-乳酸共聚物（ poly （ 1actide - co - glycolide ） ， plga ）膜及多孔塊型plga材料，觀察細胞在單層或三維培養狀態下，型膠原及fn對mscs細胞粘附、增殖及向成骨細胞分化效應及能力。
  10. The spontaneous reduction of ni3 + to ni2 + is considered to the actual origin of chemical instability of linio2 during storage. the corresponding oxidization of lattice oxygen o2 " to active oxygen species ( o -, o2 - ) is thought to the direct cause of formation of li2co3 and adsorption of h2o and co2 on the surface of stored materials

    Linioz電極材料中自發的ni3 + * ni2 +還原過程被認為是其貯存期間性能變質的產生根源，與之相對應的氧負離子生成活性氧物種則是電極材料表面形成lizc03及其它吸附物種的直接原因，而空氣中的coz和hzo促進了整個氧化還原反應的進行。
  11. The properties of cn thin films such as their morphology, component, crystal structure and the bonding structure and the relation between those properties and the gas - phase reaction parameters were discussed, showing that the deposition of p - c3n4 thin film is the compete result of various reaction processes in the dynamics balance conditions ; the process of cn films depo sition is diagnosed in situ through the optical emission spectra technique, the effects of experimental parameters on the concentration of the precursors and the gas - phase reactions in the plasma have been obtained ; the main reaction precursors for film deposition identified ; the relation between the characteristics of cn thin films and the reaction process in the plasma is analyzed. the cn thin films deposition under different substrate temperatures in high pressure pe - pld shows that the si atom of the substrate has participated the cn films growth process, based on this the growth mode of cn thin films on the si substrate is proposed. the further experiment of cn thin films deposition on si substrate scratched by diamond as well as covered with fe catalyzer has been attempted, which indicates that changing the dynamics conditions of the surface reaction can alter the growth characteristic of the cn thin films and can enhance obviously the films growth rate

    採用pld技術進行了碳氮化合物薄膜沉積，得到了含氮量為21at的cn薄膜；研究了襯底溫度和反應氣體壓強對薄膜結構特性的影響，給出了cn薄膜中n含量較小、 sp ~ 3鍵合結構成分較少和薄膜中僅含有局域cn晶體的原因；引入脈沖輝光放電等離子體增強pld的氣相反應，給出了提高薄膜晶態sp ~ 3鍵合結構成分和薄膜的含n量可行性途徑；應用pe - cvd技術以ch _ 4 + n _ 2為反應氣體並引入輔助氣體h _ 2 ，得到了含n量為56at的晶態cn薄膜；探討了cn薄膜形貌、成分、晶體結構、價鍵狀態等特性及其與氣體壓強和放電電流的關系，證明了- c _ 3n _ 4薄膜沉積為滿足動力學平衡條件的各種反應過程的競爭結果；採用光學發射譜技術對cn薄膜生長過程進行了實時診斷，得到了實驗參量對等離子體中活性粒子相對濃度和氣相反應過程的影響規律，給出了cn薄膜沉積的主要反應前驅物，揭示了cn薄膜特性和等離子體內反應過程之間的聯系；採用高氣壓pe - pld技術研究了不同襯底溫度條件下cn化合物薄膜的結構特性，揭示了si原子對薄膜生長過程的影響，給出了si基表面碳氮薄膜的生長模式；在金剛石研磨和催化劑fe處理的si襯底上進行cn薄膜沉積，證明了通過控制材料表面動力學條件可以改變碳氮薄膜結構特性，並可顯著提高晶態碳氮材料的生長速率。
  12. 4. special paint and coating can used in mainly automobile outer cover plates the material of the chromium in order to display the unique design, and used in mobile telephone and notebook pc, there are metallochrome, pearl color, porcelain color

    4特種油漆及塗料。非鐵金屬電鍍用塗料，主要用於汽車外殼鍍鉻的素材以表現獨特的設計。塑膠用水系塗料，用於手機及筆記本電腦，有金屬色珍珠色瓷器色。
  13. Thermal spray is composed of material engineering, physics, chemistry, biologic macromolecule etc. it becomes a new wide used surface process technique

    熱噴塗綜合了材料、物理、化學、生物高分子、納米材料等學科的技術，成為當今廣泛應用的一種表面處理技術。
  14. The design testing piezoelectric material surface acoustic during the experiment process in the paper has several merits : convenience, efficiency, no loss, fastness. and they can be realized. the design applies material piezoelectric response and anti - piezoelectric response to stimulus and receive saw, and apply the method of testing resonator frequency to calculate saw tested speed, simultaneously contrast the actual test result about different material to typical value in the paper

    在本論文的研究實驗過程中，給出了一種方便、有效、無損、快捷的檢測壓電材料表面聲速的設計與實現，該設計中運用材料的壓電效應和逆壓電效應激勵和接收saw ，並運用檢測諧振頻率的方法計算測量saw速度，同時給出了對不同材料的實際測試結果以及與資料典型值的對比。
  15. Irradiation graft copolymerization becomes a green and important synthetic strategy for surface functionalization and facile preparation of new organic biomedical materials

    摘要-射線輻射高分子材料表面接枝共聚合是一種綠色的、重要的有機生物材料合成制備方法。
  16. It was showed that dlc gradient film material had a good stability of hemocompatibility, for its surface almost had no changes. in comparison, the hemocompatibility of t16a14v became worse since its surface had been heavily scratched and dense oxide films on its surface had been destroyed. fratal theory and image processing method had been applied to calculate the fratal dimension of tribological surfaces furthermore to elavuate the surface morphology and roughness

    摩擦表面具有多尺度相似性和隨機性的特點，採用分形幾何理論描述表面的粗糙程度及形貌特徵，三維表面的分形維數可以作為一種尺度無關的粗糙度評定參數，利用圖象處理方法，通過材料表面的掃描電鏡sem圖象灰度數據來計算三維表面的分形維數。
  17. In this paper, using surface photovoltage spectroscopy ( sps ) and field induced surface photovoltage spectroscopy ( fisps ) as a dominated tool, we investigated the surface and interfacial electron structure, charge transfer character of two nanostructured composite system and the effect about atmosphere ( water and oxygen ) on the semiconductor nanoparticles

    本論文利用表面光電壓譜（ sps ）和場誘導表面光電壓譜（ fisps ）為主要研究手段對兩類納米復合材料的表面和界面電子結構和電荷轉移特性以及空氣中水、氧物種等氣體分子對納米材料表面光伏性質的影響進行了探索性的研究。
  18. The microstmcture and crack propagation manner of the fracture specimens have been observed using scanning electron microscopy ( sem ) and optics microscope

    Mo層對裂紋具有明顯的偏轉作用， tz - 3y20a mo疊層材料表現出一種非脆性開裂的特徵。
  19. Consideration of the poor cytocompatibility of pla materials and excellent properties of polymeric particles, pla materials were modified by embedding with polymeric particles and the cytocompatibility of modified pla materials was studied in this work. polymeric microspheres or nanospheres with a core - shell structure and different surface characters were prepared by using different materials as the surfactants and low - molecular - weight pla as the core materials via o / w solvent evaporation

    本文針對聚乳酸組織工程材料存在的生物相容性問題以及聚合物微球的優異性能，從一種新的設計手段出發，採用聚合物微球表面改性聚乳酸組織工程材料，構建得到功能微球改性聚乳酸組織工程材料表面，並研究改性后的聚乳酸組織工程材料表面的細胞相容性。
  20. Various of surface modification techniques are gradually developed and all kinds of corrosion resistant materials continuously occur. unbalance magnetron sputtering technology was widely utilized and zrn is an interesting corrosion resistant material

    各種表面改性技術逐步發展起來，各種抗腐材料也不斷出現，其中非平衡磁控濺射技術是近期比較常採用的一種制膜技術， zrn是一種較具吸引力的抗腐材料。
分享友人
分享到 Line

分享到臉書