桁架梁 的英文怎麼說

中文拼音 [héngjiàliáng]
桁架梁 英文
beam truss
  • 桁 : 桁名詞[建築] （檁） purlin
  • 架 : Ⅰ名詞1 （用來放置東西或支撐物體等的東西; 架子） frame; rack; shelf; stand 2 （毆打; 爭吵） fight;...
  • 梁 : 名詞1 （屋架中架在柱子上的長木） beam 2 （通常也指檁） purlin 3 （橋） bridge4 （物體中間條狀隆起...
  • 桁架 : truss桁架桿 truss rod; 桁架高度 truss depth; 桁架跨度 truss span; 桁架梁 girder truss; truss beam...
  1. ; 1. the trend of the development of burden and light hanging basket in the cantalever construction of continuous rigid frame bridge has been prospected, the roof truss and cable - state composite hanging basket also has been designed by analyzing and comparing with other ones. 2

    對大跨度橋梁懸臂澆築施工的各種形式掛籃施工工藝進行了比較和總結，對連續剛構橋懸臂澆築掛籃施工中重載輕型的發展趨勢進行了展望，提出了一種用於解決重載輕型懸臂澆築施工的新型桁架斜拉式組合掛籃，並進行了可行性分析計算和設計。
  2. Typical framed structures are beams, grids, plane and space frames or trusses.

    典型構架結構為梁、格柵、平面的和空間的框架或桁架。
  3. One of the most noticeable structrual differences between the cable-stayed bridge and the truss and girder types lies in the field of flexibility.

    斜拉橋與桁架和梁式類型橋之間，在結構上的一個最顯著不同之處，在於柔度方面。
  4. Meanwhile, according to the reduced theoretic of the open - web truss, the strength simplification computational method are proposed, and in comparison of the theoretical calculating value with the tested one and the behavior analysis of the tested beams during the process, the hypothesis and the theory of the beam are verified and the stress distribution of the circular hole castellated beam is also obtained

    通過費氏空腹桁架簡化計算理論值與實測值的對比分析以及對試驗梁在試驗過程中的性態分析，驗證了理論計算及各項假設的正確性，分析得出圓孔蜂窩梁圓孔周邊應力分佈特徵；並通過撓度分析，提出了實用的簡化計算式。
  5. Experimental research on truss beam carrying capacities of new type of light - gauge steel system

    新型輕鋼龍骨體系桁架梁承載力試驗研究
  6. The main body of the stadium is composed of 24 columns of trusses, which surround the bowl - shaped stands in the stadium

    鋼結構由24桁架柱圍繞著體育場碗狀看臺區旋轉而成，整體外觀酷似「鳥巢」造型。構架，桁架，鋼梁
  7. Timber structures - test methods - test of trusses for the determination of strength and deformation behaviour ; german version en 595 : 1995

    木結構.試驗方法.測定承重能力和變形特性用桁架梁試
  8. This article discuss the method to measure distortion of truss by means of ccd device. the distortion can be measured with many kind of displacement transducer, but it must be placed on stable base. when the huge truss is moving through some tunnel, it is difficult to find a stable base, especially there is no enough space for someone to operate. it is hardly to measure the distortion by touching. on the contrary, this can be achieved by means of ccd device

    桁架在自重或載荷的作用下產生的撓度可以用多種位移傳感器測得，這些測量方法需要有良好的基礎，在大型桁架梁測量現場，由於桁架的變形，難于找到這種基準，如果加上測量環境惡劣，人無法操作情況，則會給撓度測量帶來極大的困難，而採用光電荷耦合器件，並利用激光進行遠程實時撓度測量，即可以解決這個難題。
  9. It " s function is to receive laser signal and to sent out the electric signal ; the second is the monolithic processor system. this part function is to pick up the electric signal sent by ccd detector and to compute the digital signal to get the data where the laser beamed, then sent the data to pc computer ; the third part is the control interface for people to control whole measurement process

    本文介紹的桁架梁撓度實時檢測的電荷耦合（ ccd ）測量系統由ccd接收系統，單片機測量系統和pc機測量軟體三部分組成。該系統採用線陣ccd為傳感器，以8031為控制核心，在單片機系統和pc機軟體之間建立了可靠的通信，能在比較惡劣的條件下獲取、顯示、存儲、處理和比較桁架的撓度值。
  10. All the researched results prove the era method is steady and suitable for those structures : spacecraft 、 beam - plane structure 、 truss structure 、 frame 、 bridge, etc. on the basis of the consideration of the above, the major job of the article is to discuss how to identify the parameters of the long - span structure with the method of era under the action of the wind loads

    但是，國內外已有的相關文獻，對于下面的結構均進行了相關的研究，如航天器、梁板結構、桁架、框架、橋梁等。基於以上考慮，本文主要工作，就是探討在風激勵荷載作用下，如何用era演算法識別大跨空間網格屋蓋結構的模態參數。
  11. The possible shear of the upper chord will change beam from flexural member to member under flexure and compression force. this is emphasised through design example. as a result ， we find that composite floor system is good for reducing the height of floor system

    在組合樓蓋體系設計中，筆者指出，可能的桁架弦桿剪力會使作為桁架弦桿側向支承的梁由彎曲構件變為壓彎構件，這是在與桁架體系相適應的樓蓋體系設計中應該注意的一個環節。
  12. The truss type steel reinforced concrete column is a normal src style because the contradiction of steel between beams and column can be solved

    在實際運用中為了便於在樑柱節點處梁鋼筋的穿透，空腹桁架式鋼骨混凝土柱是一種常見的src柱。
  13. The last part offers some examples. it includes the single site damage detection of continuous beam, simple support beam, fixed end beam, overhanging beam, truss, and the multipoint damage detection of simple support beam

    本文採用了連續梁、簡支梁、固端梁、懸臂梁、桁架等的單點損傷識別，簡支梁的多點損傷識別。
  14. It is a top load bridge with a clear span of 288m, which is maximum one of the same structural system in asia. the main arch rib uses 8 steel tube of 920mm joined by web members and transverse truss to form a space truss. the soldier piles on the arch are made of bent frame to make the shape both artistic and novel

    梅溪河大橋為一凈跨達288米的上承式鋼管混凝土拱橋，是目前亞洲同類橋型中跨度最大的橋梁，其主拱肋採用8根920mm的鋼管，通過腹桿及平聯形成鋼管混凝土空間桁架，拱上立柱亦採用鋼管混凝土排架，造型新穎美觀。
  15. Secondly the author ' s study are introduced in this paper. the author study mainly the linear static and dynamic, elastic - plastic static and dynamic problems of cfst arc - bridge. firstly, the author establish the linear static equation on the based of the rigid equation of element by qr - method, and then analysis the inner force of arc bridge, establish the linear dynamic equation and elastic - plastic rigid equation and dynamic equation, then solve respectively the elastic - plastic rigid and dynamic equation by the method of repeated increment and no limit stabilization, arithmetic

    本文主要研究大跨度鋼管混凝土桁架拱線性靜力問題和線性動力問題以及彈塑性靜力問題和彈塑性動力問題，先利用qr法按照梁單元的剛度方程建立桁架拱的線性靜力方程，進行桁架拱內力分析，建立桁架拱線性動力方程、彈塑性剛度方程及彈塑性動力方程，然後利用增量迭代法及樣條無條件穩定演算法分別求解彈塑性剛度方程及動力方程。
  16. Thereinto, the transfer beam and transfer truss are used, while for the high - rise building with complex figure, only the transfer slab can be used. because there are few studys on transfer thick slab at present, this paper will discuss the problem

    使用較多的是梁式和桁架式轉換層，而對于上下柱網軸線錯開的體型復雜的商住樓，則只能採用厚板結構轉換層，由於這方面的理論研究還不多，本文就此展開討論。
  17. Many optimization joints mid design methods which have been applied in actual engineerings are put forward, including the rc looped - beam joint, enforced - steel loop joint, joint between columns filled with steel tubes and rc beams, joint between columns filled with steel reinforced concrete and rc columns, joint between column filled with steel tube and composite beam, composite beam design method, prestressed laminated open - web truss mid so on

    其中，提出的較優化的鋼筋砼環梁節點、鋼加強環節點、鋼管砼柱與鋼筋砼柱節點、鋼骨砼柱與鋼筋砼梁節點、鋼骨磚柱與組合梁節點及組合梁設計方法、預應力疊層空腹桁架等，都已應用於實際高層建築中。
  18. The results of the research indicate that the assembled highway bridge steel truss is an effective means to resolve the common problems of falsework over river for construction of cast - in - situ prestressed concrete continuous girders

    研究表明，採用裝配式公路鋼橋桁架解決跨河預應力混凝土連續梁現澆混凝土施工支架問題是有效的。
  19. This paper mainly makes the research of construction method for cast - in - situ concrete box girder of continuous girder bridge, using assembled highway bridge steel truss ( often known as bailey truss ) as the falsework, technical schemes for the falsework erected over river, particularly the rigid slant supports of the falsework on piers, and analysis, calculation methods and deformation of the falsework in accordance with the related tests in field

    摘要主要研究了採用裝配式公路鋼橋桁架（通常稱為貝雷架）做為支架進行連續梁橋現澆箱梁混凝土的施工方法；研究了跨河施工支架的技術方案，特別是施工支架在橋墩上的剛性斜撐，同時結合現場試驗研究了施工支架的分析計算方法及變形。
  20. Thea, aimed at different situation and with the combination of the compatibility truss theory and limited balance principle and the truss - strut model, the shear strengthening theoretic formula for the beams under concentrated load is put forward. ground on the test data and real engineering, the simple design formula is afforded

    然後，作者以桁架一拱模型和軟化桁架理論為基礎，綜合極限平衡原理，考慮了拉應變存在條件下混凝土抗壓強度的軟化，針對不同加固情況推導了集中荷載作用下的矩形截面約束梁的抗剪加固理論公式。
分享友人
分享到 Line

分享到臉書