模型修整 的英文怎麼說

中文拼音 [móxíngxiūzhěng]
模型修整 英文
altered cast
  • 模 : 模名詞1. （模子） mould; pattern; matrix 2. （姓氏） a surname
  • 修 : Ⅰ動詞1 （修飾） embellish; decorate 2 （修理; 整治） repair; mend; overhaul 3 （寫; 編寫） write;...
  • 整 : Ⅰ形容詞1 （全部在內; 完整） whole; all; complete 2 （整齊） neat; tidy; orderly Ⅱ動詞1 （整理; 整...
  • 模型 : 1 （仿製實物） model; pattern 2 （制砂型的工具） mould; pattern3 （模子） model set; mould patter...
  1. This paper analyzes the factors affecting the controlling precision of sand compactibility system and sets up the dynamic model of regression coefficient between sand compactibility and water content. to prevent the insufficiency or excess of sand water content, the amount of the first addition is set as 80 % of the total water addition amount. after the first water addition, we adopt ar model to predict the stable value of sand compactibility to shorten the time mixing the sand. each time we add water, the correction coefficient is introduced to adapt to the change in the composition of sand. the experiment shows that the mathematics model not only makes the water content in sand reach the best range within shorter time, but also directs how the sand composition should be adjusted, which can better conform to the actual situation

    分析了影響型砂緊實率控制精度的因素，建立了型砂緊實率-水分回歸系數的動態模型.為防止型砂水分不足或過量，將第一次加水量設定為總加水量的80 .第一次加水后，對型砂緊實率穩定值採用ar模型進行預測，以縮短型砂混制時間.每次加水后，引入修正系數，以適應型砂組成的變化.實驗表明，該數學模型不僅使型砂水分含量在較短時間內達到最佳范圍，同時可指示對型砂組成進行調整，能較好地符合實際情況
  2. In contrast with previous approaches, the technique here introduced conquers the shortcoming of artificial corner and non - connectivity of tv model and mumford - shah model, and makes image more vivid and perfect

    與以前的方法相比，這里所介紹的技術克服了整體變分模型和mumford - shah模型中出現拐角和連通性不好的缺陷，從而使圖像修描結果更加逼真完善。
  3. Finally, with the help of the program written in asp language, the 3d model of denture, added up with of the human faces, was compounded to provide the preview, in the ways of both fixed and motion pictures. [ results ] 3d digital model of human natural teeth and the corresponding rpd components were successfully developed. with the data base governing the 3d digital model files set up, the program of application written in asp languages was compiled and tested to run without errors, completing the initial foundation of 3d - preview system for clinical and educational practice in prosthodontics

    平臺開發是利用三維編輯軟體3dsmax製作了正常天然牙列和口腔修復學中整鑄可摘局部義齒的各組成部件、精密附著體及其他的一些相關三維模型，建立了基於sql - server的數據庫管理系統，以供方便地調用各種三維模型，合成牙列和修復義齒三維模型，再引入人頭模型引擎，通過三維模型製作多角度平面渲染圖或四川大學碩士學位論文三維動畫，作為素材上傳數據庫供二級用戶調用。
  4. 3. use the boasting dates of every bo, we atup the dea rnodel, such as c ' r and c : gs :. w wt is m as a theis, and it ' s relative efficiency is evalwt by the m, we ahalysis bo taal effiwt and scale effeency a clear ditw is given bo the dea effiho dmus nd the no dea effich we also can for m insghthe - - boon with the bokgroun

    構造具有非阿基米德無窮小量的dea模型c2r和c2gs2 ，對調整前後農業產業系統的綜合生產能力和生產效率進行評價，體現了不同調整方案的結構優化效應，並對各方案進行規模效益和投入冗餘率、產出不足率分析：運用投影定理構造「虛擬」決策單元，對方案進行修正和改進。
  5. It ' s reflected in four aspects : teaching target, teaching resources, teaching tactics and teaching assessment. the determination of teaching contents is the emphasis, and the teaching contents is determined by teaching target ; the collection of material ( teaching resources ) is the difficulty - compose a script after making a careful study of the teaching material, then collect the material according to the script ; teaching tactics are embodied by the determination of information form and by the way in which the contents accord with the form so as to get the best result in teaching ; making teaching assessment guarantees the quality of the software. in the early making period, the original model method of system engineering is adopted to produce small experimental courseware and a further revision and improvement are made in consultation with some experts. also an agreement on the demand of the software system is reached. in the later making period, the software is appraised by experts from its stability, serviceability reasonableness of construction, and the scientific nature of contents, then it is put into use as an experiment. finally those who use it are required to fill the teaching feedback table

    教學設計理論是靈魂，它貫穿于整個軟體編制過程，從四個方面來體現：教學目標、教學資源、教學策略、教學評價。教學內容的確定是重點，根據教學目標來確定教學內容；素材的收集（教學資源）是難點，在鉆研教材的基礎上撰寫腳本，根據腳本去收集素材；教學策略體現在信息形式的確定，以及如何使內容與形式協調一致，達到教學最優化的效果；而進行教學評價是本軟體質量的保證，在軟體的製作的初期，採用系統工程論的原型模型法，開發出實驗性小課件，在徵求專家的意見的基礎上進一步修改、完善、確認軟體系統的需求併到達一致的理解，在軟體製作的後期，再請專家從軟體的穩定性、可操作性、結構的合理性、內容的科學性等方面進行鑒定，最後將軟體作實驗性投入使用，再讓實驗對象填寫教學反饋信息表。
  6. 3. vecm of result indicate shanghai a index, shenzhen b, hengsheng index, and jiaqua - an index can recur equilibrium when they deparure equilibrium by coefficient of vecm moreover hengsheng index is very quike. by granger test indicate between a and b inde - x have cause and effect contemporary between hengsheng index and jiaquan index hav - e cause and effect, this result is same to vecm

    3 、誤差修正模型結果指出上海a股，深圳b股、恆生指數和加權指數在短期偏離均衡時，仍可經由誤差修正項的調整而回到長期均衡關系，並且恆生指數的調整速度是最快的正向調整。
  7. This machine is one of corollary equipment for making steel blade die cutting plate. it is used to trimming and cutting for die cutting ruler and creasing rounded edge after modelling

    本機是製做鋼刀模切版過程中的配套設備之一，它可廣泛用於切線刀，壓痕線在成型后的修整、切斷。
  8. This machine is one of corollary equipment for making steel blade die cutting plate. it is used to trimming and cutting for brand mold cutting tool and creasing rounded edge after modelling

    本機是製作鋼刀模切版過程中的配套設備之一，它可廣泛用於切線刀、壓痕刀在成型前後的修整、切斷。
  9. China has a vast population and a broad market, thus liquor consumption owns a considerably potential market in china. however, due to the intence yet disorder competition of the present market, the marketing of the liquor industry in china has fallen into an rather awkward dilemma. the hidden trouble, the lurking danger, cause the businessmen in this line unable to extricate themselves from a low - leveled ricious competitive cycle. such severe challenge also confronts yuechitequ company. therefore, the most urgent problems waiting for resdring lie in how to take advantage of the present resoures effectively, how to distinguish the market situation, and how to institute a scientific product - popularizing programme in order to keep the enterprise standing undefeated in the intense competition, and develop the enterprise rapidly, favorably. this thesis makes a thoughtful analysis about the external conditions of market and internal ones resources in the yuechitequ by means of inrestication through questionaire and scientific data processing. in the second part, with the application of stp system theory of marketing and new - product - pricing theory, it designs and further expounds the popularization of the new products of this company, then forms a excutable performance and makes a constant rerision via market practice. in this way can it explor a suitable road to popularize the products in the liquor market, help the enterprise to free from the difficulties and progress healthely, consitently

    本文通過在岳池特曲公司現有產品市場進行問卷調查，運用科學的數據處理方法對所回收的658份問卷統計分析，以及利用美國哈佛大學商學院著名教授邁克爾?波特（ michaelporter ）提出的五種力量模型和價值鏈與vrio分析理論，對白酒市場的公開數據細致分析，以明確四川省岳池特曲酒業有限公司實施新產品市場推廣所面臨的市場條件和內部資源條件，在此基礎上，本文運用市場營銷學中stp系統理論、新產品定價理論等，對岳池特曲公司推出的白酒新產品進行市場細分、確定目標市場和市場定位，並根據市場營銷4p理論制定新產品的產品策略、價格策略、渠道策略、市場促銷推廣策略，形成最終整體完善的可執行方案，再通過市場實踐對推廣方案進行檢驗、修正，力圖在酒類市場中探索一條新產品市場推廣的適用道路，並幫助企業擺脫困境、邁開步伐、持續健康的發展。
  10. In this dissertation, two kinds of optimization, methods are proposed. firstly, only these linking weights corresponding to the control rules that affect the control performance significantly are updated in order to reduce the compute works and speed up the training progress. secondly, the updating step is adjusted adaptively in accordance with the error and the change of error of the system based on the t - s model to get better performance

    針對模糊神經網路控制器一般存在著在線權值調整計算量大、訓練時間長、過度修正權值可能導致系統劇烈振蕩等缺點，提出了兩種模糊神經網路控制器的優化方法：在線自學習過程中僅對控制性能影響大的控制規則相關的權值進行修正，以減小計算量，加快訓練速度；基於t - s模糊模型，根據偏差及偏差變化率大小動態自適應調節權值修正步長，抑制控制器輸出的劇烈變化，避免系統發生劇烈振蕩。
  11. In this paper, ansys, the software on finite element analysis, is made use of processing the static and modal analysis on the preliminary models and its " modified ones. by analyzing the results, we can conclude that the stresses on the components of the modified models are tended to equilibration and the location of the branches " brace can also influence stresses and translations on the branches. in addition, the values of the intrinsic frequencies on modified models " are larger than the ones on preliminary models, but the ranges of the frequencies on both models are almost same

    傳統的弧形閘門的支臂結構基本上都是三角架式的，這主要是因為按平面體系進行計算的傳統設計方法忽略了結構的整體性及弧形閘門的空間結構特點，設計得比較保守，而實際上，將其改為a型結構也存在可行性，本文是利用有限元分析軟體? ? ansys對原模型及修改模型分別進行靜態和固有頻率的計算，通過分析比較其結果可知，支臂改為a型后會使閘門的整體受力趨于均勻，即原模型受力大的部件其應力變小，而原模型受力小的部件其應力會變大；而且a型支臂的支桿在不同的放置位置對支臂的應力和位移變化也有一定的影響。
  12. The computing model is optimized according to the model board trolley installation form and the concrete pouring process

    根據現場測量時模板臺車的結構安裝形式和混凝土澆注的施工步驟，反復修整完善計算模型。
  13. Conclusion in viva reparation combined with gastroduodenal artery perfusion is a favourable method for donor liver procurement in liver transplantation model of big animals

    結論對供肝採用完全的在體修整，增加經胃十二指腸動脈灌注是建立大動物肝移植模型良好的供肝獲取方式。
  14. In this article, based on theory of the rcm technology and exception - tree, the equipment - management programmer and the faulty category in dlpec ( dalian petro - chemistry corporation ) are discussed in details, and the equipment - management patterns for the enterprise are brought forward. for all kinds of equipments, some measurements on the maintaining and governing are established ; moreover, the system function mode structure is also schemed out, which responses the working situation of equipment in the enterprise in detail and is composed of equipment technology document - management, equipment document - management, equipment integrating - management, equipment maintaining - plan management, equipment stat. analysis management, integrating - query system etc ; at the same time, the whole system codes are devised, which include equipment category code, engineering planning sort code, spare part sort code, testing report catalogue code of pressure vessel pile, equipment stat

    本文以大連石化公司的設備管理程序和設備種類為研究對象，應用rcm的技術和故障樹原理，提出了具體的適合於該企業的設備管理模式；針對各種不同類型的設備，制訂出相應的維修管理對策；並運用信息系統分析與設計方法，設計出了比較詳細的、能真實反應企業設備工作狀態的系統功能模型結構，包括：設備技術文檔管理、設備檔案管理、設備綜合管理、設備維修計劃管理、設備統計分析管理、綜合查詢系統等；同時，設計出了比較完整的系統代碼，主要包括：設備類別編碼、工程計劃分類編碼、備品備件類別編碼、壓力容器管道檢驗報告目錄編碼、設備統計類別編碼等；另外，對數據庫設計、輸入輸出設計、系統的實施與測試等提出了比較具體的方案。
  15. From experimental result, i preliminarily know that eps is good thermal insulation material because the absorption of water is low and heat insulation is good, it is practicable at preserving temperature field of frozen earth roadbed and bringing frozen disaster under control ; second, according to the analysis of the eps that is applied into practical project, i have studied the practical effect which eps preserve roadbed temperature field, and the influence that was made after building field. i have get that eps can influence moisture content and frozen upper limit, through practical measuring data, i have studied freezing and expanding quantity and melting and submerging quantity during a complete frozen and melting cycle as well as have expanded and proved the practical application effect of eps with some reference significance to deep research of some connected problems. finally, through computer data analysis, setting up the analytical model of finite unit, i have simulated the temperature field of roadbed heat preservation, then expounded and proved that the height of embankment influenced the effect of thermal insulation material

    其一是對聚苯乙烯泡沫塑料（ eps ）保溫板以及天然路基土層、路堤填料進行了室內試驗分析，結合國內外現在的有關科研成果，綜合確定其各項特徵參數；從試驗結果初步認識到聚苯乙烯泡沫塑料是一種吸水率低，隔熱性好的保溫材料，在凍土路基溫度場的保護和凍害治理方面是可行的；其二通過eps保溫板在現場工程實踐中的應用分析，研究了保溫板在保護路基土層溫度場的實際效果以及修築路堤后造成的影響，保溫板對土體含水量、凍結上限的影響，通過實測資料，研究了在一個完整的凍融周期內整個路基的凍脹量和融沉變形量，論證了保溫板的實際應用效果，對有關問題的進一步研究和相關工程設計具有參考意義；其三，通過計算機數值分析，建立有限元分析模型，對保溫路基的溫度場進行了模擬計算，論證了路堤高度對保溫材料效果的影響。
  16. In the chapter 4, we make an extension to the model of the chapter - 2. the service speed change is instant, that is say, during the service using speed - 1 to serve, if the number exceeds the threshold n, then the server should immediately use speed - 2 not speed - 1 to serve current customer and the next till entered the empty state. we especially point out that the classical m / g / 1 queuing model and the m / g / 1 queuing with n - policy are the particular cases of model discussed in chapter - 4

    第四章對第二章討論的模型進行了進一步的擴展，其服務速度1到速度2的轉移規則是瞬間轉移，也即當服務臺以速度1服務顧客的過程中如發現系統中的顧客數已超過門限n值時就即刻調整為以速度2服務當前顧客和后續顧客直到系統變空的可修m g （ m g ） 1排隊系統，並指出經典的m g 1和具有n -策略的m g 1排隊是本章研究的兩種特例。
  17. This part introduces the main genres of capital structure. please notice the importance of the mm theorem, which is the theory basement of subsequent analysis. comparing with the financial structure is another content in this part

    本章作為整篇論文的基礎，結合現代資本結構理論發展的實踐背景，主要評述了mm理論及修正模型、權衡理論、激勵理論、非對稱信息論和控制理論。
  18. Avoiding the use of mathematic models, the fuzzy logical control ( flc ) system meets the control demands of the tunnel ventilation process well which is a nonlinear distribution system. but because of its lacking of learning and adaptive ability, many problems has emerged when using flc : the membership functions of the fuzzy variables cannot be changed, the fuzzy logical rules cannot be modified automatically when environmental variables such as traffic model, average exhaust, etc, are changed. for this reason, the paper uses fuzzy neural network control ( fnnc ) system to improve the control process

    模糊控制系統避開了數學模型，能很好適應公路隧道通風系統非線性和分散式參數特徵，但是模糊控制系統本身的學習和適應能力差，導致了模糊變量各語言值隸屬函數和控制規則不能隨著環境參數（如交通量、基準排放量等）的改變而自動調整和修改等問題，本文將具有強大學習能力的神經網路融合到模糊控制系統中，研究和探討了隧道通風模糊神經控制方法。
  19. The dual standard quantity ( the work piece and the discrete standard quantity ) mutual measuring and model verification methods are also proposed, which perfects the whole modifying process from data measuring, error separation, model establishment to real correction. after researching the discrete standard quantity system dynamic error separation technique, two error correction methods based on genetic algorithm and neural network mixed modeling technique are established. the two methods are the discrete standard quantity dynamic error direct / synchronous correction and prediction model correction ; the model ' s parameters and model ' s exercising method are also confirmed

    設計了雙標準量值（工件和離散標準量）互比測量的模型驗證方法，完善了從數據測量、誤差分離、模型建立到實際修正的整個修正過程；研究了離散標準量系統動態誤差分離技術，建立了基於遺傳進化演算法與神經網路混合建模技術的兩種誤差修正方法? ?離散標準量動態誤差直接（同步）修正方法和預報模型修正方法，並確定了模型結構參數和模型訓練方法；分析了預報模型的多次預報性質，並得出了多次預報與多步預報的等效關系，確定了測量系統的有效預報范圍以及模型參數對泛化誤差的影響；進行了模型的對比實驗驗證和被測工件動態誤差修正試驗，成功地實現了任意二面角和圓分度的實時誤差修正。
  20. Third, based on the thorough research of the multilevel security models, integrity models and role - based access control models ( rbac ), a modified blp model ( mblp ) is designed and applied in a secure operating system developed independently. then, a well - integrated model of blp model, clark - wilson model, dte model and rbac models is proposed, leading to a prominent dynamic authorization access control model ( daacm ), which supports diverse security policies, including confidentiality, integrity and authorization

    第三，在深入研究多級安全模型、完整性模型、基於角色的授權模型等基礎上，首先提出了一個修改blp模型（ mblp ）的方案，並在一個自主開發的安全操作系統中得到了應用；然後通過將blp模型、 clark - wilson模型、 dte模型、 rbac模型有機地集成應用，提升出一個支持機密性、完整性和授權等多安全策略的，可實現動態授權的訪問控制模型（ daacm ） 。
分享友人
分享到 Line

分享到臉書