樹脂體 的英文怎麼說
中文拼音 [shùzhītǐ]
樹脂體
英文
resin bodies-
Study on cyanate ester resin modified with aluminum borate whisker
硼酸鋁晶須改性氰酸酯樹脂體系的研究The series have outstanding floatage, lightness and excellent covering effect which come into being effect of mirror surface. they may reflect light and heat
該類產品具有非常好的漂浮力，可以漂浮於漆膜表面，能夠有效地反射光和熱；另外，還有很好的遮蓋力和白亮度，在低酸值樹脂體系中能產生鏡面效果。3. based on the gel time and dsc curve figure of two kinds of modified phenolic resin and flory and kissinger theory, the rage of cure process parameters for the resin system, moulding pressure and resin content are established
3 、通過對二種改性酚醛樹脂體系凝膠時間、 dsc曲線圖的分析，引入flory理論、 kissinger理論，確定了樹脂體系的固化工藝參數（固化溫度、固化時間、后處理溫度）范圍；並初步確定了成型壓力和樹脂含量的范圍。Study on cured latent accelerators for modified imide epoxy resin system
環氧樹脂體系潛伏性促進劑的研究Silicone systems can cure by platinum - catalyzed addition cure systems, tin - condensation cure systems, peroxide - cure systems, or oxime - cure systems
硅樹脂體系可以用鉑催化加成硫化系統、錫冷凝硫化系統、過氧化物硫化系統或肟硫化系統進行硫化。Poly phenylene oxide epoxy system ppo ep and its application in copper clad laminate
環氧樹脂體系在覆銅板中的應用Study on the curing kinetics of the novel latent epoxy resin systems
新型潛伏性環氧樹脂體系固化動力學National key laboratory of advanced composites ( lac ) in beijing institute of aeronautics materials ( biam ) has developed a new medium temperature curing epoxy resin system, of which the glass transition temperature is 119. 88, for resin transfer molding ( rtm ). in order to investigate the relation between viscosity and time - temperature, the rheological behavior of the system was studied by dsc and viscosity experiments. a rheological model based on the dual - arrhenius equation was established and used to simulate the rheological behavior of the resin, which was in good agreement with experimental data
本文表徵了北京航空材料研究院先進復合材料國防科技重點實驗室樹脂組新開發出的rtm用中溫固化環氧樹脂體系3266 （玻璃化轉變溫度為119 . 88 ）其粘度隨時間、溫度的變化關系，在粘度實驗和dsc熱分析實驗的基礎上，對用於rtm工藝的該環氧樹脂體系的化學流變特性進行研究，並根據雙阿累尼烏斯方程建立樹脂體系的流變模型。In this paper, radiation curing and photo curing are compared. the fundamental process of electron beam ( eb ) curing is elaborated, and the features of eb cured composites are discussed. furthermore, the development of eb cured composites technology is summarized, which includes the selection of the resins suitable for eb curing, photoinitiators, active diluents and the curing mechanism. finally, a kind of low - energy eb curing technology is introduced and some innovative resins are exploited
對輻射固化與光固化進行了比較，闡述了電子束輻射固化的基本過程，並對電子束固化復合材料的技術特點進行了概述.此外，還詳細總結了電子束固化復合材料技術的發展狀況，包括可電子束固化的樹脂體系，輻敏劑以及活性稀釋劑的選擇和應用，固化機理的研究.最後，還對復合材料的低能電子束固化技術以及新型樹脂體系的探索進行了總結Nano - caco _ ( 3 ) only affects blends " degree of crystallization, but do not affect the crystallization structure
一caco3隻對樹脂體系的結晶度有輕微的影響，不影響晶體的結構。2 resin with bad wetness systems, and non - thixotrpic grind materials. operate as following process : add the paint material and the solvent - add surface active agent if adopt - add the pigment stir, make it disperse or grind to the needed granularity
2對于非觸變性研磨性磨料，潤濕性差的樹脂體系操作如下：加油漆和溶劑混合加入表面活化劑如果採用加入顏料攪拌分散或研磨分散到所需細度加預凝膠攪拌分散至所需細度稀釋至所需粘度。First, according to the demand of vimp for resin system, the reaction kinetics and rheological of up resin are investigated and the optimal content of low additive profile ( lpa ) is determined. then vimp based on a high - permeable medium and grooves are studied by visual experiments, through which the appropriate high - permeable mediums are selected and the parameters of width, depth and spacing for flow grooves and spacing for supply grooves are optimized. furthermore, various factors affecting the mold filling process are discussed and the whole vacuum infusion procedures are described taking examples of the manufacture of a model boat and a sandwich panel in one infusion
文中首先根據vimp對樹脂體系的要求，對vimp用不飽和聚酯樹脂體系的動力學和流變學性能進行了研究，確定了最佳低收縮添加劑的含量；對高滲透介質型和溝槽型vimp開展了實驗研究，通過可視化實驗優選出較好的高滲透介質，確定了引流槽的寬度、深度和槽間距及主槽的槽間距等工藝參數並進行了優化；對影響充模過程的各種因素進行了詳細的討論，並以模型船和夾芯面板的製作為實例描述了兩種vimp的成型過程；在實驗的基礎上，建立了二維滲漏模型，採用控制體有限元法對高滲透介質型vimp進行了成型過程的計算機模擬計算，通過充模時間和流動前峰的計算值與實驗結果的比較，驗證本文所採用的數學模型和數值方法的正確性，其結果對實際生產具有一定的理論指導意義。Rheological behavior characterization and modeling of the 4503a bismaleimide resin for rtm processing
專用雙馬來酰亞胺樹脂體系流變特性及模擬分析研究The results showed that the fabric of the reinforced material was a very critical factor in the influence of tackifier contents and optimal tackifier contents on the mechanical property of composites ; the tackifier had no negative effect on mechanical property of 827 carbon fabric reinforcement composites and 3186 carbon fabric reinforcement composites, when tackifier contents was individually percent five and eight
結果表明：定型劑含量對復合材料力學性能的影響規律、定型劑最佳用量均對增強材料的織態結構有著很強的依賴性；在3186緞紋3266樹脂體系和827單向碳布3266樹脂體系中，定型劑用量分別為8 %和5 %時，定型劑的加入對復合材料的力學性能沒有造成明顯的劣化作用。Study on curing reaction of epoxy resin and phthalazinone curing agent
含二氮雜萘酮環氧樹脂體系的固化反應動力學研究Principle and technique of sand consolidation with novel epoxy - phenolic resins system
酚醛樹脂體系的固砂原理與技術Plastics. unsaturated polyester and epoxy resins. determination of overall volume shrinkage
塑料製品.不飽和聚酯樹脂和環氧樹脂.體積總收縮率的測定Plastics - unsaturated polyester and epoxy resins - determination of overall volume shrinkage iso 3521 : 1997 ; german version en iso 3521 : 1999
塑料.不飽和聚酯和環氧樹脂.體積的總收縮量的測定Flame resistance agents ( fra ), namely, lfr - up, ath and ato, were added into the rtm resin to obtain uniform resin system with ideal flame - retardant property by optimized process
通過向rtm專用樹脂中添加磷酸酯（含氯） 、氫氧化鋁、氧化銻三種阻燃劑，採用優化的處理工藝，得到阻燃劑分散均勻、阻燃效果好的rtm專用樹脂體系。A consolidation material by synthesising acrylic - organic silicon - epoxy resin has been prepared and applied in the test of reinforcement for clay samples of the jinsha site
摘要通過合成一種丙烯酸有機硅環氧樹脂體系的土遺址加固材料，將其應用於成都金沙土遺址土樣的加固試驗。分享友人