比剛度 的英文怎麼說

中文拼音 [bǐgāngdù]
比剛度 英文
modulus-to-density ratio
  • 比 : Ⅰ動詞1 （比較; 較量高下、 長短、距離、好壞等） compare; compete; contrast; match; emulate 2 （比...
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  1. From the analysis, some suggestion about joint rigidity design is put forward : 1. joint initial rigidity can be enhanced within the limited range when to increase end - plate thickness ; 2. the rigidity and ultimate moment can be enhanced obviously when to adopt the beam with inclined section or to add axilla at the connections between beam and column ; 3. withm the permissive construction condition, exteriorly extended end - plate inclinedly placed is suggested to be applied firstly ; 4. when the rate of joint rigidity to beam rigidity, that is called, is less than 0. 1, the joints can be regarded as zero - rigidity joints ; on the other hand, if is more than 26, it is rigid connection joints

    採用斜截面梁並在樑柱交接處局部加腋能明顯提高節點剛度和梁的抗彎能力； 3在允許的施工條件下，應優先採用外伸式端板斜放節點，有利於提高節點剛度，進而提高節點的抗彎能力； 4節點剛度與其連接構件的剛度比值0 . 1時，可按鉸接節點設計； 26時，可按剛接節點設計。
  2. Considering the special structure of multi - ribbed slab, founding diphase body mechanical model of compound material, strengthening rib beam and rib pillar by equivalent volume ratio of concrete and slice brick, the paper drew elastic compution constant and shear constant. based on the things, the paper simplified isotropy compution model to wall, gave practical design formula of elastic mold and shear mold, provided necessary parameter for practical design formula of elastic rigidity. finally the calculating results agree well with the text results

    結合密肋復合墻板的特殊構造，建立墻板的復合材料二相體力學模型，按照混凝土與砌塊體積比不變原則對肋梁肋柱同時加強，得出墻板的彈性計算常數及剪切常數，在此基礎上，進一步將墻板簡化為各向同性的計算模型，給出墻板彈性模量及剪切模量實用計算公式，為密肋復合墻板的實用彈性剛度計算公式提供必要的參數。
  3. The paper studied tests on three epiboly profiled bar concrete beams, bearing capacity of normal section, stiffness and behavior of cracks, and put forward formulas as advise. based on extant nonlinear concrete theory, a fem model was built by ansys program. the results of fem analysis was verified by tests data. some parameters in fem model were changed to build different models and the analysis results were compared with the advised formulas

    本文通過三根外包型鋼混凝土梁試驗，研究了其正截面承載能力、剛度以及裂縫方面的性質，並提出了一些相關建議公式。同時在現有混凝土非線性分析理論的基礎上，採用ansys有限元分析程序建立了外包型鋼混凝土梁的有限元模型，結合試驗數據對模型進行了驗證，另外還改變了一些參數建立了有限元模型，並和建議公式的結果進行了對比。
  4. Based on the numerical simulation and accuracy analysis to previous slab ' s test with the ansys program, the study of composite wall, with various detail design under potential load action respectively or jointly is carried on and the wall ' s atress behavior and failure mode is obtained, also the influence to wall ' s stiffness and bearing capacity by kinds of factors, including wall ' s shear span ratio, member ' s section, bar arrangement, etc. based on the hammer blow test and stiffness test, a 1 / 3 scale ten - bay model ' s modality parameter and elastic deformation characteristic is analyzed

    在對密肋復合墻板運用ansys ~ （ （ ? ） ）程序進行數值模擬、分析驗證的基礎上，對典型組合墻體在不同連接構造和不同荷載效應組合作用下的受力形態和破壞模式進行研究；計算分析了復合墻體剪跨比、邊框柱截面尺寸、邊框柱配筋大小以及墻板內肋梁肋柱配筋等諸多因素對密肋復合墻體承載力及剛度的影響，得出其變化規律。
  5. The regularities of pile - top reaction distribution, the carrying load ratio between pile and raft, the settlement and the imparity settlement of foundation in the frame - tube structure and the single wall are influenced by some factors such as the stiffness of the superstructure, the intensity of the soil under the piles, the length and radius of the piles, the distance between the piles, the thickness and the suspended width of the raft

    對豎向荷載作用下的空間筒中筒結構、樁筏基礎和地基進行了三維有限元分析。研究整體結構和單片墻結構在上部結構剛度、樁端土強度、樁長、樁徑、樁距、筏板厚度、筏板外挑寬度等影響因素變化時的樁頂反力分佈規律、樁筏荷載分擔比、樁基沉降和差異沉降規律。
  6. Mode is structure ’ s inherence characteristics, each mode has specifically resonant frequencies, damping values, mode shapes, mode stiffness and mode mass

    模態是結構的固有振動特性，每一階模態都具有特定的固有頻率、阻尼比、振型、模態剛度和模態質量。
  7. In light of the elastic thin plate theory, the author induced equilibrium differential equation of bi - direction cellular slab, which was proved correct through analysis and comparison to result of ansys to with theoretical calculation. through the deflection and bending moment coefficient calculation of bi - direction cellular slab under various boundary conditions, the author brought forward the theory that the deflection of mid - span and bending moment coefficient calculation of mid - span and support of bi - direction cellular slab could be in accordance with solid plates ", which could satisfy the precision of engineering

    本文根據彈性薄板理論，導出了雙向空腹板的平衡微分方程，並通過理論計算和通用有限元程序ansys結果對比，驗證了其正確性；通過對各類邊界條件下雙向空腹板撓度和彎矩系數的計算比較，本文提出：雙向空腹板跨中撓度及跨中、支座彎矩可使用本文空腹板剛度公式查找現有的實心板撓度彎矩系數表進行計算，完全能滿足工程精度要求。
  8. In the end, we used this procedure to analyze the influence of the oblique angle to the bearing points and inter - force, and discuss the influence of the ratio ( the bending moment to the wrest moment ) to the skew bridge

    最後利用該程序分析了斜交角對支點反力以及梁內力的分佈影響，討論了彎扭剛度比對格柵梁的影響。
  9. Oversteer in the “ textbook ” sense is the difference between cornering stiffness at front and rear, taking into account tyre characteristics, geometries, bush rates, etc, etc

    轉向過度在教科書中是指前後輪轉向剛度的不同，需要考慮到輪胎的特性，幾何學，襯套比率等。
  10. Compared with traditional machine tool, parallel machine tool has such priories as high response velocity, high accessional technology value, and high adaptability to circumstance

    與傳統機床相比，並聯機床具有剛度重量比大、響應速度快、環境適應性強和技術附加值高等優點。
  11. When we study the continuous purlin and simply supported purlin, we find that the continuous purlin enhance more significative load - carrying capacity and stiffness than the simple - supported purlin. but it decreases effectively the weight of cold - formed steel sections, so the continuous purlins are becoming more and more popular used

    通過研究發現連續檁條比簡支檁條具有較高的承載力和較強的剛度，還能有效降低用鋼量，因此連續檁條應用也越來越多。
  12. Tial alloys are widely used because they possess light quality and excellent elevated temperature properties such as high strength retention, resistance to creep and oxidation

    Tial合金因其輕質、高溫下高比強度、比剛度以及抗蠕變和抗氧化性能突出等優點，在航空航天等高溫材料領域有極廣泛的應用。
  13. Based on the theory of stochastic finite element, the structural parameters of frame - shear structure including stiffness and mass and damping are simulated to be stochastic variables. by solving recurrence equation of stochastic finite element, the duration curve of mean value and standard deviation of seismic response can be obtained for every floor of frame - shear structure. an analysis is thus given to the effects of independent variation and simultaneous variation of structural parameters on the seismic dynamic response of frame - shear structure. as shown by the results, with regard to frame - shear structure, the effect of variation of strucural parameters on the change of mean value are chiefly the increase of standard deviation of response. variation of stiffness will cause the response of frame - shear structure to variate greatly ; variation of mass shows less effect ; and variation of damping shows insignificant effect. the effects of simultaneous variation of various structral parametres on seismic response are only slightly greater than the effect of stiffness variation alone

    以隨機有限元理論為基礎，將框剪結構的剛度、質量、阻尼等結構參數為隨機變量.通過求解隨機有限元的遞推方程，得到框剪結構各層的地震動力響應均值和標準差歷時曲線.分析結構參數單獨變異，以及同時變異對框剪結構地震響應的影響.研究結果表明，對框剪結構而言，結構參數的變異對響應的均值變化影響都不大，主要是增大響應的標準差.剛度的變異性將引起框剪結構的響應發生大幅度變異，質量的變異性影響稍小，阻尼的變異性影響不顯著.結構各參數的同時變異，對框剪結構地震響應的影響，僅比剛度單獨變異的影響稍大
  14. Nowadays the issue of composite fatigue is among those primarily concerned for designing aircraft structures with long term durability and reliability

    復合材料層壓板由於其高的比強度和比剛度，在現代航空航天結構上得到廣泛應用，其疲勞問題也逐漸受到工程師的重視。
  15. Advanced composite is widely used in designing the structure of aircrafts, for it has some excellent performances such as excellent fatigue, high strength and stiffness ratio, etc

    先進復合材料比強度、比剛度以及良好的抗疲勞特性等諸多優異性能為飛機結構工程設計實踐廣泛應用。
  16. As the lightest constructional material, magnesium alloy has high specific strength, high specific stiffness, good magnetic - shielding ability, good damping ability, and good machinability

    鎂合金是比重最輕的結構材料，具有高的比強度、比剛度和良好的磁屏蔽性、阻尼性、切削加工性等優點。
  17. Frp is a kind of composit materials which has high specific intensity high specific rigi low density excellent corrsion - resistance. in the fierce market competition, the emphasis of technic are focused on advancing quality reducing cost and advancing efficiency

    纖維增強塑料（ fpr ）是一類具有比強度高、比剛度高、低密度、耐腐蝕性等優異性能的復合材料。
  18. Being a new generation of high temperature structure materials, ni / al and ti / al system intermetallic compounds are most potentially. they possess many excellent capabilities at high temperature such as high strength, corrosion resistance, contrast intensity and contrast rigidity

    Ni al系和ti al系金屬間化合物是極有潛力的新一代高溫結構材料，它們具有許多優良性能，如高溫高強度、高溫耐蝕性、高的比強度和比剛度等。
  19. Particulate reinforced metal matrix composites possess several additional advantages such as light weigh high specific strength and stiffness great shear strength. so they are widely used in many general applications in spaceflight car fittings sports goods areas. according to the difference of the wild phase ' s formation, the composite ' s manufacturing method can be divided into traditional way and in situ way

    顆粒增強金屬基復合材料具有重量輕、比強度與比剛度高、剪切強度大等優點，因而被廣泛應用於航空航天領域和汽車配件、體育用品等行業，其製造方法一般分為外加法與內生法。
  20. Compared with traditional optical materials, the specific stiffness of sic is much bigger. if the structural dimension is the same, the lightweight extent of sic components is the highest. furthermore, sic have these merits of low thermal distortion, excellent optical performance, isotropy, innocuity and molding for complex shape

    與傳統光學材料相比， sic的比剛度最大，在尺寸相同的條件下，其輕量化程度最高；此外，它還具有熱變形系數小、光學性能好、各向同性、無毒、能夠實現復雜形狀的近凈尺寸成型等優點，因而成為空間反射鏡的首選材料。
分享友人
分享到 Line

分享到臉書