氣力輸送 的英文怎麼說

中文拼音 [qìlìshūsòng]
氣力輸送 英文
air conveying
  • 氣 : Ⅰ名詞1 （氣體） gas 2 （空氣） air 3 （氣息） breath 4 （自然界冷熱陰晴等現象） weather 5 （氣味...
  • 力 : Ⅰ名1 （力量; 能力） power; strength; ability; capacity 2 [物理學] （改變物體運動狀態的作用） forc...
  • 輸 : Ⅰ動詞1 （運輸; 運送） transport; convey 2 [書面語] （捐獻） contribute money; donate 3 （失敗） l...
  • 送 : 動詞1 （運送; 傳送） deliver; carry 2 （贈送） give as a present; give 3 （伴送; 送別） see sb of...
  • 氣力 : effort; energy; physical strength
  • 輸送 : deliver; supply; carry; transport; convey; feed; transmit; transfer; transportation; delivery
  1. The pulse pneumatic conveying system has been a important transporting method for grain material, because of lower velocity, higher ratio of blend and a littler gas, as well as shattering less materiel, abrasing pipeline and easy recovery

    脈沖氣力輸送裝置以其低速、高混合比、低耗氣量等一系列持點，並由此帶來的被輸送物料破碎少、管道磨損小、產生粉塵少並且易於回收等優點，成為新一代粉粒料氣力輸送設備，並且被廣泛使用。
  2. But there has been not correspondingly control system for it by far. ln this thesis a pulse nitrogenous conveying control system based on profibus is designed and achieved on the thinking of modularizing the pulse nitrogenous conveying system, which can be used for different the pulse nitrogenous conveying system and added new control cells. the thesis reviewed systematically the pulse nitrogenous conveying system in practical, and makes the understanding that the system is composed of standard gas storage cell, conveying equipment cell and target container ceil. then a common modularized control system project is designed and achieved by structurized programming orienting process, which consists of four control models, respectively for gas storage cell, for conveying equipment cell and for target container cell

    本文綜合實際使用的氮保護脈沖氣力輸送系統，把氮保護脈沖氣力輸送系統分為標準化的氣源設備單元、發送設備單元和目的料倉設備單元，在此基礎上，設計了用於氮保護脈沖氣力輸送系統的通用模塊化控制方案，採用面向過程的結構化編程思想，基於profibus現場總線，實現了組成該方案的四類控制模塊：氣源單元控制模塊、發送單元控制模塊、目的料倉單元控制模塊和通訊處理控制模塊。
  3. At the same time, combining the electrostatic measurement principle and the actual working conditions of pneumatic pipelines, the author puts forward the design principle in theory and finishes the devising, executing, debugging, experimenting and analyzing the experiment phenomena and results, testing the feasibility of the electrostatic sensor to be used in the measurement on the mass flow rate of the coal paniculate. furthermore, with the debugging and experimenting of the system, the author improves the electrostatic sensor and its signal collecting system gradually according to the problems, and makes the performance of the system to be enhanced remarkably

    同時，作者結合靜電測量原理以及氣力輸送管道的實際工況，從理論上提出了靜電傳感器的設計依據，完成了靜電傳感器及其信號採集系統的設計、製作、安裝、調試和實驗，分析了實驗現象和結果，驗證了靜電傳感器用於煤粉質量流量測量的可行性，並且通過系統調試和實驗，針對發現的問題對靜電傳感器及其信號採集系統不斷地進行了改進，使其性能有了顯著地提高。
  4. Pneumatic conveying requires comparatively high gas velocities.

    氣力輸送需要比較高的氣體速度。
  5. Experiments in pneumatic conveying show that there exists a maximum particle concentration.

    氣力輸送實驗表明，這里存著一個最大的顆粒濃度。
  6. These forms may include pneumatic conveying, moving beds or stick-slip flow, fluidized solids transport and nearly always one or more fluidized beds.

    這些形式可以包括氣力輸送，移動床或粘附滑移流動，流化固體顆粒輸送，並且幾乎總是包括一個或多個流化床。
  7. The flow behavior of resin, water outlet structure at bottom of the mixed bed, water inlet position of hydraulic transportation, water intake ratio, and pneumatic transportation etc. have been analysed, giving out optimal selection of them combined with reality in the field

    對樹脂的流動性能、混床底部出水結構、水力輸送進水位置、進水比例以及氣力輸送等進行了分析，並結合實際給出了最佳選擇。
  8. On the base of the analysis on the advanced technology of hard ferrite in foreign country, the main procedures of preparing hard ferrite pre - sintering material are determined as follows : first, the ferrite oxides coming from the main cold rolling line and strontium carbonate are conveyed to storage tank by gas power and weighed automatically according to the demands of constituent composition. and then they are mixed and grinded by using method of wet treatment. finally the mixtures is transported to the devices of storage by transporting pump

    在分析國外先進的永磁鐵氧體生產工藝的基礎上，確定了生產高檔永磁鐵氧體預燒料的主要過程：首先，利用攀鋼冷軋鐵紅為主要原料，將氧化鐵紅及碳酸鍶採用氣力輸送至貯料料倉，經自動稱量裝置，按工藝配方稱量後分別由氧化鐵紅及碳酸鍶發送罐氣力輸送進入預混攪拌筒加水攪拌，然後再送入混磨機濕法混磨；最後，混合物經輸送泵輸送至料漿存儲裝置，經定量進料泵定量輸送至回轉窯進行濕法預燒，預燒料經緩冷至室溫后，再球磨。
  9. Applied analysis of pressure pneumatic conveying system and suction pneumatic conveying system

    壓氣式氣力輸送系統與吸氣式氣力輸送系統的應用分析
  10. Design of new pneumatic conveying system for filter rod

    新型濾棒氣力輸送裝置的設計
  11. Abstract : the paper introduces briefly the retrofit of the cleaning equipment and the operating results of the cylinder type bag filter in the fluidization systems for the copper smelting flash furnace

    文摘:簡要概述了閃速爐氣力輸送系統收塵裝置的改造和圓筒型布袋收塵裝置在氣力輸送系統中使用的效果。
  12. Study on pressure drop of two phase flow in positive pneumatic conveying system

    麵粉正壓氣力輸送的兩相流壓損研究
  13. The papers also brings forward the design parameters of the material critical suspending speed and the wind capacity according the theory of the air transportation, analyses and build up the condition of material diameter and airflow speed of the gas - solid current locating the separating interface

    論文根據氣力輸送理論求出螺旋氣力吸取料裝置物料的懸浮速度及風機風量的設計參數，分析確定位於分離界面處的氣固二相流處于層流狀態即處于粘性磨擦阻力區的粒徑條件與氣流速度條件。
  14. Solid materials handling and pneumatic conveying system packaged machinery and its equipment and valves are mainly used for conveying, material unloading, dedusting, metering, mixing, packing units in the processing units of the solid materials including powder, particles, powder mixtures and flakes of abs, ps, pe, pp, pom, san, pet, pc, pta, pvc, bpa, sap, as and pmma in the trades of petroleum, chemical industries, chemical fiber, dye, pharmacy, food, electronic, paper making, natural gas, power, environmental protection, metallurgy and etc. it is applicable for various pneumatic conveying systems and gravity flow conveying systems under the conditions of diluted - phase, densed - phase, high pressure, low pressure and vacuum pressure

    固體物料處理和輸送系統成套機械及其專用設備、閥門主要應用於石油、化工、化纖、染料、醫藥、食品、電子、造紙、天然氣、電力、環保、冶金等領域中固體物料（含abs 、 ps 、 pe 、 pp 、 pom 、 san 、 pet 、 pc 、 pta 、 pvc 、 bpa 、 sap等粉沫、顆粒物料、粉粒混合物、片狀）生產加工過程中輸送、卸料、除塵、計量、混合、包裝等工段使用，能適用於稀相、密相、高壓、低壓、負壓各種氣力輸送系統和重力流輸送系統。
  15. Study and application of dense - phase pneumatic conveying system for fly ash transportation

    粉煤灰濃相氣力輸送系統的研究與應用
  16. The phase three and phase four 4 600 mw supercritical units of ligang power plant transport dryash usingatmospheric pressure, which is characteristic of positive pressure and dense phase technique

    利港電廠三、四期工程4 600mw超臨界機組的除灰方式採用正壓濃相氣力輸送技術來完成干灰的輸送。
  17. The measurement and control of injection quantity becomes difficult because the process of coal powder injection for blast furnace is a transport by gas combined gas with solid

    由於高爐煤粉噴吹是氣固二相流的氣力輸送，噴吹量的檢測與控制變得很困難。
  18. The pressure loss in the pipe of pneumatic conveying of waste plastics is one of the important parameters

    摘要在廢塑料氣力輸送過程中，管道壓力損失是重要參數之一。
  19. The quantitative relational expression is obtained about the coefficient of additional pressure loss and the froude number by experiment, and the relation is made clear between the average speed of waste plastics particles and the pressure loss of per unit length

    由實驗得出廢塑料輸送管內氣力輸送附加壓力損失系數與弗勞德準數的定量關系式，廢塑料顆粒平均速度與單位管長壓力損失的關系。
  20. Gas - solid two - phase flow is existed widely in multiphase flow system, for example, desert sand in nature, fuel transportation in field of chemical industry, metallurgy, energy sources and foodstuff, and so on, as well as pneumatic conveying and dust treatment of materiel in bulk ( i. e. sands, corn and plastic granula etc. ). in addition, sulfureted bed, whirlwind dust - exhaustion, sedimentation room and filtration process are involved with gas - solid two - phase flow

    氣固兩相流在多相流體系中普遍存在，例如，自然界的大漠揚沙，化工、冶金、能源和糧食等領域的燃料配送，散裝物料（如沙子、穀物、塑料粒）的氣力輸送和粉塵處理等，硫化床、旋風除塵、沉降室及過濾過程中也會涉及到氣固兩相流。
分享友人
分享到 Line

分享到臉書