水力試驗 的英文怎麼說

中文拼音 [shuǐlìshìyàn]
水力試驗 英文
hydraulic test
  • 水 : 名詞1 （由兩個氫原子和一個氧原子結合而成的液體） water 2 （河流） river 3 （指江、河、湖、海、洋...
  • 力 : Ⅰ名1 （力量; 能力） power; strength; ability; capacity 2 [物理學] （改變物體運動狀態的作用） forc...
  • 試 : 名詞（古代占卜用的器具） astrolabe
  • 驗 : 動詞1. （察看; 查考） examine; check; test 2. （產生預期的效果） prove effective; produce the expected result
  • 水力 : waterpower; hydraulic power水力剝離 [采礦工程] hydraulic stripping; strip with water; 水力采礦 hy...
  • 試驗 : trial; experiment; test
  1. Because of the technical complexity of the turbine for the three gorges project and on the basis of several important technical problems which have been defined in the international bidding documents for 14 generating units in the left bank power station, the owner of the project has decided another some important technical problems based on appraisal and comparison in the bid appraisal stage after the bidding documents are analyzed and the tender documents are cleared by the tenderers

    由於三峽工程水輪機技術上的復雜性和挑戰性，在左岸電站14臺機組國際招標文件已明確了若干重大技術問題的基礎上，在機組議評標階段，對招標文件進行分析和投標商對投標文件進行澄清說明后，經評議比選，業主又決策了幾個重大技術問題，主要有：水輪機設計水頭的確定，負傾角葉片水輪機的應用，兩套水力設計，舍棄初期轉輪，蝸殼進行水壓試驗等。
  2. Specification of model resistance test for self - stabilized hydrofoil craft

    自穩式水翼艇模型阻力試驗規程
  3. A study of purification ability of seven different hydrophytes

    傘草等7種水生植物污水凈化能力試驗研究
  4. Test method for pressure testing of assemblies of rubber - lined fire hose and rubber booster hose in service on interior standpipes

    室內儲水管用橡膠襯里的消防軟管和橡膠增強軟管的組合件的壓力試驗方法
  5. Standard guide for conducting static acute toxicity tests starting with embryos of four species of saltwater bivalve molluscs

    用四種鹹水雙殼類軟體動物幼蟲進行的靜態急性毒力試驗的標準指南
  6. Unseat by water pressure testing method for cycle tyres

    力車輪胎脫圈水壓試驗方法
  7. The fem analysis for the three structures of sling screw - thread - based, namely the circle, rectangle and that with strengthen plate, and the tensile test for sling screw - thread - based in torpedo body show, that the bonding with strengthen frp plate between load - bearing metal parts and frp hull with hatch can reduce the stress concentration and significantly decline the local stress in frp hull with hatch. this structure can also be used in the similar produces. ( 3 ) the effects of parameters for bonding process on the adhesive strength and leakproof are discussed, such as the bonding interface reduce, bonding surface treatment, match of adhesive surface, protect for adhesive seam and so on

    本文通過某型號雷體吊耳螺紋座結構的三種方案，即圓形昂耳螺紋座、長方形吊耳螺紋座、具有增強板的吊耳螺紋座的有限元分析及雷體吊耳螺紋座拉力試驗結果證明：金屬承力件與開口玻璃鋼殼體粘接採用玻璃鋼增強板補強，緩和了應力集中，使開口殼體局部應力明顯降低，類似的水下兵器用金屬承力件與開口復合材料殼體膠接均可採用此種結構形式。
  8. Method of internal pressure test for carbonated beverage bottles

    汽水飲料瓶的抗內壓力試驗法
  9. Fin stabilizer is a kind of active stabilizer, which is designed on the principle of torque counteraction. fin stabilizer applied at present is an angle feedback system which calculate the controlling torque through the fin angle. because the relationship between the lift produced by fin and the fin angle is mainly determined by the hydrodynamic experiment, so there are some defects

    目前使用的減搖鰭是一個角度反饋系統，它通過鰭的轉角來計算控制力矩，這樣就存在一些不足之處，因為鰭上產生的升力和鰭角的對應關系主要靠鰭模的水動力試驗來求得。
  10. Because the relationship between the lift on the fin and the fin angle is gotten by the static hydrodynamic experiment, which has great error, especially dynamic hydrodynamic experiment, the control torque gotten by the experiment can not counteract the wave torque well and the stabilization result is not perfect

    而鰭的水動力試驗存在著很大的誤差，特別是在動態條件下，鰭的水動力特性測試更困難，所以這種通過計算求得控制力矩的方法產生的鰭升力無法很好地抵消波浪力矩，因而影響了減搖效果。
  11. ( 3 ) hydraulic resistance coefficient formulas are derived according to a great number of flume experiments and relative theory analysis

    （ 3 ）通過系列水槽試驗和相關理論分析，提出了十字片梅花加糙的有效水深和水力阻力系數計算公式。
  12. The results of flume experiment indicated that, the flow velocity and froude number of the overland flow would fall with the rainfall splash intensity rose ; the flow depth and resistance coefficient would enhance with the rainfall splash intensity increased

    水槽試驗結果表明：水槽槽面薄層水流流速及弗汝德數隨雨滴打擊強度的增加而降低，水深、阻力系數隨雨滴打擊強度的增加而增加。
  13. 448 the systematic hydrostatic test ( dry run, hot test, dynamic test, actual start - up ) is scheduled for next monday

    系統水壓試驗（學習、加熱試驗、動力試驗、實際開車）定於下星期一進行。
  14. Di - on electrics service and products cover the power electric field including power generation transmission distribution, power equipment manufacturing, subway, utilites, ac dc metrology field as well, more than 500 units of electric power utilities and stations such as beijing power supply bureau, guangzhou power supply bureau, baosteel, three gorges power station and more manufacturers like siemens, abb, alstom, bicc, pirelii, toshiba and more and 30 units of metrology institutes in china like nim, tsinghua university and more are our user. di - on electric is sole and exclusive distributor for numerous famous companies like transinor doble norway, measurements international canada, ndb canada, schuetz germany, aan germany, dr. strauss germany and etc, taking care of their business and service in p. r. china including hongkong

    絕大多數員工擁有本科和研究生以上學歷，在電力系統和計量系統工作多年，從事電力檢測帶電監測和計量測試儀器的技術服務和市場銷售工作長達10年以上，為約500多家電力工業系統的發供電部門如北京供電局，廣州電力局，深圳供電局，三峽電廠，廣州抽水蓄能電廠，田灣核電站等等，科研調試部門如廣東省電力試驗研究所，湖北省電力試驗研究所等等與設備生產廠如siemens ， abb ， alstom ， toshiba等等提供了國際最先進可靠的測試技術和儀器設備為約30多家國內二級以上相關計量科研院所，包括國家計量院，清華大學，中國運載火箭研究院，空間技術研究院，航天二院，成飛，西飛和各省市計量院，電力試驗研究院所等提供了大量最先進可靠的計量檢測儀器。
  15. Standard process for model resistance test of displacement ships and its record form

    一般排水量船模阻力試驗規程及結果的標準表達形式
  16. In this paper, for the bonding between the sling screw - thread - based and composite hull based on the underwater weapon composite, the bonding structure design, process design and leakproof technology between the load - bearing metal parts and composite hull are studied. with the further investigation on tensile test of the sling screw - thread - based the common technology of bonding between load - bearing metal parts and composite hull is obtained, which establishes the experiment and theory base for the technology of underwater and deepwater weapon in china

    本文以水下兵器為背景，以某型號雷體吊耳螺紋座與復合材料殼體的膠接為研究對象，著重進行了金屬承力件與復合材料殼體的膠接結構設計、工藝設計、膠接防滲技術的研究，並進行吊耳螺紋座拉力試驗研究，最終獲取了水下兵器用金屬承力件與復合材料殼體連接形式的共性技術。
  17. In the trials of high concentration food wastewater treatment conducted by an anaerobic membrane bioreactor, the flux decline rule of four polyethersulphone ( pes ) uhrafiltration ( uf ) membranes with different surface morphology was investigated with atomic force microscopy

    摘要在厭氧膜生物反應器處理高濃度食品廢水的試驗中，藉助原子力顯微鏡分析了四種表面形貌不同的聚醚碸超濾膜的通量衰減規律。
  18. The following conclusions are gained : ( 1 ) the located shear band prongs the ligament near the top crack tip and the structure may occur shear - mode fracture at the angle of 155 ? to crack when load is 87. 92mpa ; the mode of fracture of the flange joint structure is not possible to be void - mode ; ( 2 ) it is proved that loading and then unloading repeatedly can not increase the possibility of invalidation of the structure when the times of loading and unloading are not too more when load is operating pressure ; the structure is safe when the vessel is operating ; ( 3 ) in the fe model of the thesis, not considering the influence of water pressure test which is in the process of fabrication of vessel in fe results in larger deviation in analysi

    得出了以下結論：在8792mpa的載荷下筒體一封頭連接結構處的集中剪切帶貫穿韌帶，可能發生沿與原裂紋線成155 「角方向剪切型斷裂；筒體一封頭連接結構不可能發生韌窩型斷裂； （ 2 ）在工作壓力下進行次數不多的反復加、卸載，結構不會破壞，也不會喪失安定性：結構在工作狀態下是安全的； m在本文的彈塑性有限元模擬計算中，對于裂紋尖端進行力學分析時，不考慮壓力容器製造過程中水壓試驗的影響，將導致計算結果出現較大的偏差； （ 4 ）筒體完全屈服時的載荷為92石3mpa ，封頭完全屈服時載荷為86
  19. Big error exists in the hydrodynamic experiment, especially on dynamic state ; it is more difficult to test the hydrodynamic property of fin stabilizer. so the lift comes from this kind of control method ca n ' t counteract the wave torque perfectly, thereby affecting the stabilizer ' s function

    由於鰭的水動力試驗有很大的誤差，特別是在動態條件下鰭的水動力特性測試更是困難，所以這種控制方法產生的鰭升力不能很好地抵消波浪力矩，從而影響了減搖效果。
  20. Stress measurement and analysis for a spherical vessel under hydrostatic test

    球形爆炸容器水壓試驗應力測試及分析
分享友人
分享到 Line

分享到臉書