水霧化 的英文怎麼說

中文拼音 [shuǐwùhuà]
水霧化 英文
atomized water spray
  • 水 : 名詞1 （由兩個氫原子和一個氧原子結合而成的液體） water 2 （河流） river 3 （指江、河、湖、海、洋...
  • 霧 : 名詞1. （水蒸氣凝結成的小水點） fog 2. （像霧的許多小水點） fine spray
  • 水霧 : spray
  1. Atomizing characteristics of coal - water paste for pfbc

    增壓流化床燃燒用水煤膏的霧化性能
  2. A mist of perfume issued from the atomizer

    一陣香水的輕霧從霧化器中噴射出來。
  3. As to the work about theory analysis, at first, the paper describes the atomizing and humidifying process of the centrifugal nozzle with firing pin type, high pressure and little aperture and liquid physical properties. later, combining with the structure characters of this kind of nozzle, the paper studies on the theory of the atomizing and humidifying process by three phases, which is water film forming phase, water film falling into pieces phase, and heat and mass transfer between water and air phase in turn

    理論工作方面，首先描述了撞針型高壓小孔徑離心式噴嘴的霧化加濕過程和液體的物理性質，然後結合撞針型高壓小孔徑離心式噴嘴的結構特點，將其霧化加濕過程分三個階段進行機理上的研究，這三個階段依次為液膜形成、液膜初次破碎及二次霧化、水與空氣的熱濕交換。
  4. Based on the theory analysis and experiment work, the paper studies the humidifying property of the centrifugal nozzle with firing pin type, high pressure and little aperture. compared with the traditional air washer, the high efficiency and energy saving character of this kind of nozzle is stood out

    課題從理論和試驗兩方面分析研究了撞針型高壓小孔徑離心式噴嘴的霧化加濕性能，並將其與傳統噴水室加濕系統進行能耗比較，突出了撞針型高壓小孔徑離心式噴嘴高效節能的特點。
  5. Through the special studies on impacts to atomizing and humidifying effect from such factors as the firing pin type, centrifugal structure, higher spraying pressure, less aperture, initial water temperature and original state of the air, some conclusions are obtained, such as : the centrifugal nozzle with firing pin type, high pressure and little aperture has bigger air eddy and atomizing angle. the spaying liquid has high velocity. the droplet is small, and the heat and mass transfer velocity is high

    通過對撞針型結構、離心式結構、較高的噴水壓力、較小的噴嘴孔徑、噴水初溫及待加濕空氣初狀態對霧化加濕效果的作用原理的重點分析，得到：撞針型高壓小孔徑離心式噴嘴具有較大的空氣渦與霧化角，噴出的液體流速高、液滴小、水與空氣傳熱傳質速率高，撞針型結構提高了霧化加濕效率，高壓小孔徑的特點為霧化加濕提供了較大的能量，而噴水初溫的升高會減小水的粘性力和表面張力，從而優化加濕效果。
  6. Integrated the work on theory and experiment, the paper provides technical performance material at large about the automating and humidifying character of the centrifugal nozzle with firing pin type, high pressure and little aperture to the manufacture and user. with the valuable reference during the selecting the equipment and ascertaining the parameters, the users could select and control the humid parameter

    課題的理論與試驗兩方面工作相結合，為撞針型高壓小孔徑離心式噴嘴的霧化加濕性能提供了較為詳細的技術性能資料，為生產廠家和用戶在設備選型和參數選擇過程中，提供了有價值的參考，便於用戶正確而經濟地選擇、控制濕度參數，有效調節噴嘴孔徑、噴水初溫和噴水壓力的大小。
  7. Ehighly humidifying water spraying function

    高度霧化的噴水功能
  8. With gelatin liquor as adhesive and wheat meal as granulation material, the effects on spray granule ' s strength of fluidizing gas velocity, bed temperature, nozzle air pressure and adhesive concentration were studied experimentally in a batch conical fluidized bed spray particle generator

    本文在一間歇錐形流化床噴霧造粒器中，以食用小麥澱粉為原料，以明膠的水溶液為粘結劑，實驗研究了流化氣速、床層溫度、噴嘴霧化空氣壓力、粘結劑濃度對噴霧造粒顆粒強度的影響。
  9. Quantitatively analyses the concrete influences on atomizing humidifying performance of the nozzle aperture, initial temperature and the pressure of spray water and the water - air ratio through a single factor experiment

    通過單因素試驗定量分析了噴嘴孔徑、噴水初溫、噴水壓力以及水氣比對霧化加濕的具體影響。
  10. An experimental system of electro - spray with two different charging methods - inducted by ring electrode and polarized by contacted needle electrode is established. an effective charging equipment for fuel is designed. water and kerosene ' s characteristics of charging and atomization in the electro - spray are measured and analyzed

    2 、建立了環狀感應電極充電和閉式接觸電暈充電的荷電噴霧實驗系統，對煤油和水兩種不同物性介質的荷電特性與荷電霧化特性進行了測量及分析。
  11. I placed more saline into the machine and asked her to try again

    我在霧化儀中放了跟多的生理鹽水，讓她再試。
  12. I placed saline into the machine, attached some tubing, turned on the power and saw a steam - like vapor emitted

    我把生理鹽水放到霧化儀里，連接好管道，打開電源，看到蒸汽樣的氣霧噴出。
  13. Its atomized parcel is so small that no drip is separated out. this kind of centrifugal nozzle has high humidifying efficiency and low energy cost, which could be used in many situations in textile factories such as directly humidifying in workshop and humidifying in air pipeline

    撞針型高壓小孔徑離心式噴嘴的霧化粒子細小、無水滴析出、加濕效率高、耗能少，可直接向車間加濕，適用於紡織廠等多種應用場合。
  14. As to the work about experiment study, at first, the paper makes certain the prominent affecting factors to the automating and humidifying property of this kind of nozzle by orthogonal experiment. by jicha analysis method and fangcha analysis method, the paper got that the nozzle aperture, the initial water temperature and the spraying pressure have prominent effect to the humidifying property while the effect of the original air state is small

    試驗工作方面，首先通過正交試驗確定對撞針型高壓小孔徑離心式噴嘴霧化加濕性能影響顯著的因素，運用極差分析法和方差分析法，得到噴嘴孔徑、噴水初溫和噴水壓力對噴嘴的加濕性能影響顯著，而待加濕空氣初狀態的影響相對較小。
  15. The surface reaction of water atomized 304l austenitic stainless steel powder during sintering has been studied

    摘要研究了水霧化奧氏體不銹鋼粉末在緻密時的表面化學反應。
  16. The conclusions are as follows : ( 1 ) high - pressure water - atomization can be used to produce a pre - alloyed steel powder with high apparent density, high green strength, size - stability after sintering and low hydrogen - loss content ; ( 2 ) the higher smelting temperature and / or water pressure, the finer particle size of steel powders ; ( 3 ) when the atomization angle holds in a reasonable value ' s range the obtained powder will have a better particle size distribution ; ( 4 ) an optimum atomization technological parameters : liquid steel flux, water pressure and water prick angle was obtained ( 5 ) reduction variables ( temperature, holding time, material - bed ' s thickness and reducing gas flux ) have a significant effect on the particle agglomeration and properties of final powder was given ( 6 ) different alloying methods were developed to modify properties of ferrous powder materials and hence to broaden its applications in ferrous powder metallurgy industry

    本文系統研究了水霧化預合金鋼粉生產工藝及合金化方法對鐵基粉末冶金材料性能影響，詳細研究了冶煉、霧化、還原工藝參數對預合金鋼粉化學成份和物理性能影響，並得出如下結論： （ 1 ）採用高壓水霧化技術可用於生產高密度、高強度、尺寸穩定性的低氫損含量的水霧化預合金鋼粉。 （ 2 ）冶煉溫度越高，高壓水壓力越大，所得生粉顆粒粒度越細。 （ 3 ）水錐角調整在一個適當角度范圍內可獲得粒度組成較好的生粉。
  17. Water atomization is a technique that can commercially and high - efficiently manufacture iron & steel powders. the key in their production technique is the high - pressure water atomization and the green powder reduction at an elevated temperature

    水霧化制粉是一種適用於規模化、高效率生產高性能鋼鐵粉末的技術，其生產技術的核心是高壓水霧化技術和原生粉末高溫還原技術。
  18. Water atomized pure iron powder and alloyed steel powder for powder metallurgy

    粉末冶金用水霧化純鐵粉合金鋼粉
  19. External firm is rornd, the surface is shine. it is atomized and shaped with stainless steel water. extensively applied in raising and cleaning up of the surface of nonferrous alloy and stainless products. after treatment, the surface of workpiece is glabrous, rustless and owns metallic luster

    由不銹鋼水霧化成形的圓球狀顆粒，表明光亮，用於有色金屬及不銹鋼製品的表面清理，強化及起毛處理，處理后的工件表面光潔、無繡、凸現出金屬光澤。
  20. The feasibility of copper matrix reinforced by cr2o3 particles was discussed from the aspect of the demand of composite on reinforcer, interface and its formation. crcu alloy powders prepared by water atomization were turned into cr2o3 / cu compound powders, which were made into composites

    本文從復合材料對顆粒增強相的要求、復合材料的界面以及復合材料的成型等角度分析了cr _ 2o _ 3顆粒作為彌散強化相增強銅基體的可行性，採用水霧化法制備crcu合金粉末，並通過預氧化的方法得到cr _ 2o _ 3 cu復合粉末，運用粉末冶金法制備cr _ 2o _ 3 cu復合材料。
分享友人
分享到 Line

分享到臉書