混成復合材料 的英文怎麼說

中文拼音 [húnchéngfùgěcáiliào]
混成復合材料 英文
hybrid composites
  • 混 : 混形容詞1. （渾濁） muddy; turbid2. （糊塗; 不明事理） foolish; stupid
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  • 復 : Ⅰ形容詞1 （重復） repeated; double; duplicate 2 （繁復） complex; compound Ⅱ動詞1 （轉過去或轉過...
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  1. Taking the andalusite from south africa and alumina fiber as raw materials, adding aluminum sulphate as binder, fabrication and properties of alumina fiber reinforced andalusite composite was studied through wet dispersion, mould pressing and sintering processes

    以紅柱石和氧化鋁纖維為原料，用硫酸鋁作為結合劑，經過分散、混合、半干法成型、高溫燒成工藝，對氧化鋁纖維增強紅柱石基復合材料的制備及性能進行了研究。
  2. In the paper, the diabase fiber was also selected to reinforce pvc for the first time, which has high intensity, high rigidity and low cost, the diabase fiber was treated firstly, then during mixing, melting, pressing procedure, the diabase / pvc composite were prepared

    本文首次對高強度、高剛度、低成本的輝綠巖纖維增強pvc復合材料進行了研究。論文首先對輝綠巖纖維進行了表面改性，然後將改性后的輝綠巖纖維與pvc混煉、壓片制備了輝綠巖纖維pvc復合材料。
  3. In chapter two, we fabricated r - ni - fe / al2o3 nanocomposites successfully by using ball - milling mixing method plus hot - pressing process. meanwhile, their microstructures are characterized by x - ray diffraction ( xrd ) analyser, transmission electron microscopy ( tem ), field emission scanning electron microscopy ( fe - sem ) and brunauer - emmett - teller ( bet ). the results indicate that ni - fe particles are homogenously dispersed in the matrix in the composites

    在第二章中，我們採用高能球磨混合方法加上熱壓燒結工藝，成功制備了ni - 20fe al _ 2o _ 3納米復合材料，並通過x射線衍射儀（ xrd ） 、透射電鏡（ tem ） 、場發射掃描電鏡（ fe - sem ） 、比表面孔隙儀（ bet ）對該復合材料的微結構進行了表徵。
  4. Due to the requirements of complex configuration of spatial curved surfaces and of continuity of fiber laying have becoming a difficult problem in cad technology for bicycle body frame of hybrid fibered compound material with multi - branch special shaped entire - body and sections of hollowed thin wall

    摘要對于多分支整體異形空心薄壁斷面混雜纖維復合材料自行車車架，由於復雜的空間曲面構形和纖維鋪設連續性要求成為其cad技術難題。
  5. Concrete is the composite multiphase material made up of stones and ossified cement grout

    混凝土是一由粗骨料和硬化水泥沙漿組成的多相復合材料。
  6. Polybenzoxazine / vermiculite hybrid nanocomposites were prepared from two kinds of polybenzoxazine precursors and two kinds of organically modified - vermiculite minerals and expanded - vermiculite which were consisted of vermiculite, hydrobiotite and phlogopite. after treatment of vermiculite minerals by hexadecyl trimethylam monium bromide ( ctab ), the d001 of vermiculite layers of vermiculite mineral increased from 1. 43nm to 2. 67nm and developed a d002 = 1. 34nm

    本文分析了蛭石精礦和膨脹蛭石的組成和結構，用十六烷基三甲基溴化銨（ ctab ）進行了有機化處理，再通過熔融或溶液混合插層苯並嗯嗪樹脂（ ben ）制備了ben插層蛭石納米復合材料，並採用蒙脫土進行了對照實驗。
  7. The disperse degree of the ceramic can greatly affect uniformity of the composite, which limit the poling voltage and affect the piezoelectricity. in this paper, the relationships among constitutes, microstructures, dielectric and piezoelectric properties were calculated by employing the banno unit cell mode ; pzt ceramic were synthesized by the hydrothermal method and the appropriate solution was selected according the adsorption of pvdf on the ceramic particle surface ; then, relationships between the disperse degree and the fabrication process were studied. base on these, the pzt / pvdf composites intermingled some pan were prepared and the microstructures were investigated

    論文首先利用bannounitcell模型，計算了pzt pvdf壓電復合材料的組成、結構、與其壓電和介電等性能之間的關系；針對壓電復合材料存在的均勻分散性差的缺點，選用水熱法制備的粒度均勻的pzt陶瓷粉末，並採用溶液混和法與聚合物pvdf進行分散復合，重點研究了不同工藝條件下陶瓷的均勻分散性及其與材料微觀結構之間的關系。
  8. The newly arisen homogenization theories of masonry, derived from composite material mechanics, bases on the characteristics of masonry ' s constituent phases and the analysis of their blend effect, so that the mechanics characters of the masonry representative volume element ( rve ) can be obtained. then the rve is applied in complete structures to describe the structures mechanics characters

    新發展起來的砌體均質化理論，源於復合材料力學，它以砌體各組成相（材料）的力學性能為基礎，以分析它們之間的混合效應為主，得到砌體代表性體積單元rve （ representativevolumeelement ）的各種力學特徵，再將代表性單元應用到整體結構中，來表達整體結構的力學性能。
  9. Through the research of crosslinking of matrix resin, heating treatment of composite and mixing of different polymer, we draw some conclusions : 1 、 percolation theory can explain the phenomenon of the jump of resistance when the content of cb reach a critical volume ; 2 、 based on ohm conduct theory, abounded to the percolation the wbibull statistical theory and other theory, an adapted theory was obtained to explain the jump of resistance and the other phenomenon ; 3 、 the ntc phenomenon was eliminated by crosslinking the matrix of conductive composite, at the same time the stability of composite was improved

    通過對基體樹脂的交聯、復合材料的熱處理、聚合物共混物的研究得出了如下的結論： 1 、滲濾理論能夠很好的解釋導電粒子含量達到某一值時電導率劇增的問題； 2 、在歐姆導電模型的基礎上，綜合應用了weibull統計理論模型，結合原來的體積膨脹等理論，成功的解釋了ptc復合材料在基體材料熔點附近的跳變問題、 ntc現象以及熱循環穩定性等問題； 3 、有機ptc導電復合材料經硅烷交聯以後能夠消除ntc現象，改善了導電復合材料的穩定性能。
  10. The wall was equaled to an elastic composite slab with silica bricks as main body and concrete rib beams, columns and outer frame as reinforcing fiber. ( 2 ) elastic - plastic stage. the wall was equaled to a rigid frame - oblique compression bar model in which concrete frame was equivalent to a rigid frame while silica brick was equivalent to a oblique compression bar

    （ 1 ）彈性階段? ?將墻體視為一種以輕質砌塊為基體，混凝土肋梁、肋柱、外框為增強纖維的復合材料等效彈性板； （ 2 ）彈塑性階段? ?將墻體視為一個由鋼筋混凝土剛架和與之鉸接的砌塊等效斜壓桿組成的剛架斜壓桿組合模型； （ 3 ）破壞階段? ?將墻體視為肋梁嚴重破損的梁鉸框架模型。
  11. This dissertation focuses on how to develop a high performance damping mechanism based on multi - energy transitions, which is independent or little dependant with the viscoelasticity of polymer matrix. three sections are mainly included in this dissertation as follows : chlorinated polyethylene ( cpe ) / piezoelectric ceramic ( pzt ) / vapor grown carbon fiber ( vgcf ) composites ; cpe / 2, 2 ' - methylene - bis - ( 4 - methyl - 6 - cyclohexylphenol ) ( zkf ) / vgcf composites ; organic hybrids made from cpe and small molecules cpe / pzt / vgcf composites : the damping composites of multi - energy transitions mechanism were produced by mixing pzt and vgcf into cpe. in this system, the mechanical vibration energy that was transmitted to cpe was found to convert into joule ' s heat through conduction paths between vgcf in the polymer matrix, so the vibration fades away

    本論文主要包括三個方面的研究內容： ?氯化聚乙烯（ cpe ） /壓電陶瓷（ pzt ） /氣相生長碳纖維（ vgcf ）復合材料； ? cpe /雙[ （ 2 -羥基- 3 -環己基- 5 -甲基） -苯基]甲烷（ zkf ） / vgcf復合材料； ? cpe基有機小分子混雜型復合材料cpe / pzt / vgcf減振復合材料：利用壓電和導電填料填充高聚物基體，當復合材料受到機械振動時，通過高聚物基體將機械振動能傳遞到壓電陶瓷粒子上，利用壓電陶瓷的壓電效應，將機械能轉換成電能，則電流在導電粒子產生的迴路中流動，由於導電迴路具有一定的電阻，所以電能又轉變成熱能耗散掉，從而起到減振的目的。
  12. After the 1960s, some new breakage theories, such as the fracture mechanics and the damage mechanics, had been applied in the research of the concrete. it made people had the farther understanding about the concrete. based on the existing research productions of inland and overseas, combining with the experimental results and applying the viewpoints of the composite material, the energy, the combination of grandness and

    本文結合試驗所得到的結果，在國內外已有研究成果的基礎上，應用復合材料觀點、能量觀點以及宏觀與細觀、損傷與斷裂相結合等觀點，較為詳細地探討了鋼纖維輕骨料混凝土的破壞特點和增強機理，並將損傷理論與斷裂理論結合起來對其受力性能的規律進行深入的分析。
  13. Rc is a composite material with rebar and concrete that have different physical mechanics characters, and its constitutive relationship is relatively complex

    摘要鋼筋混凝土是由鋼筋和混凝土兩種具有不同物理力學性質的材料組合而成的復合材料，其本構模型比較復雜。
  14. Noticing that strong exothermic reaction due to large negative enthalpy of mixing can occur among major components of ti - zr - based quasicrystal alloy systems and zr - based bulk amorphous alloy systems, we developed for the first time a new technique for fabricating both ti - zr - ni systems quasicrystal materials and zr - al - ni - cu systems amorphous - based composite materials using laser - induced self - propagating reaction synthesis ( lsrs )

    注意到構成ti - zr基準晶合金體系和zr基大塊非晶合金體系的主要組元之間具有很大的負混合焓，因而能夠發生很強的放熱反應。利用這一特點，我們首次開展了激光誘導自蔓延反應合成ti - zr - ni系準晶材料和zr - al - ni - cu系非晶復合材料的探索研究。
  15. Fiber / resin / aluminum alloy laminated composites is a kind of interlaminar superhybrid composite material developed by laminating fiber, resin and aluminum alloy. it has not only the property of polymer composites but also that of aluminum alloy

    纖維樹脂鋁合金疊層復合材料是由纖維、樹脂、鋁合金疊層復合而成的層間超混雜復合材料，它既保持了樹脂復合材料的性能又兼具鋁合金的性能。
  16. Reactive powder concrete ( rpc ) is a new kind of compound concrete that has ultra - high strength, high ductility. besides having characteristic of concrete filled steel tubular, rpc filled steel tubular structure can decrease cross section owing to the ultra - high strength of rpc, and economize on concrete and small dead load. the structures have broad prospects in high commercial and civil building, many - storied factories, high - span bridges and urban traffic

    活性粉末混凝土（ rpc ）是一種新的超高性能、高韌性的水泥基復合材料，將其灌入鋼管形成鋼管活性粉末混凝土，這種結構除了具備鋼管混凝土的一般特性外，因其超高強度使構件截面尺寸大大減小，還可進一步節約混凝土並減輕結構自重，必將在高層建築、公共建築、多層廠房、橋梁、交通等領域有著廣泛的應用前景。
  17. So, the ideal mixture model is adopted to estimate their densities, volume velocities, wave impedances, specific heats, gruneisen parameters and hugoniot coefficients. relative research indicates that not only the compositions but also microstructures of the composites affect their physical properties

    對復合材料的相組成和元素麵分佈的分析，以及對其顯微結構的觀察表明， w - mo 、 mo - ti體系復合材料均可看作簡單混合物體系。
  18. By using the high pure alumina micro - powder ( > 99. 0 % ) and the polymorphous alumina fiber as materials, by adding alumina sulfate as the binder or polypropylene - amide as the disperser respectively, through mixing, dispersing, and compression molding, at different temperatures of 1200 c, 1350 c, 1400 c, 1500 c, and 1550 c with no pressure, the alumina fiber - alumina composites were made

    本試驗採用高純氧化鋁微粉（ 99 . 0 ）和多晶氧化鋁纖維為原料，分別加入硫酸鋁和聚丙烯酰胺作結合劑和分散劑，經混合、分散、壓力成型及在1200 、 1350 、 1400 、 1500 、 1550下無壓燒成制得氧化鋁纖維? ?氧化鋁復合材料。
  19. The main achievement of this text is a method to analyse through the theory, combine the material science of concrete, relevant knowledge of the composite, through method of mechanical analysis. set up one practical concrete pore structure compound body model comparatively. and through an analysis of test data in documents, examining the science and practicability of the model. according to calculation strength that model receive being with test strength fit very well, the coefficient correlation is very high

    本文的主要成果是通過理論分析的方法，結合混凝土材料科學、復合材料的相關知識，通過力學分析的方法，建立了一個較為實用的混凝土孔結構復合體模型。並通過對文獻中試驗數據的分析與回歸，檢驗了模型的科學性和實用性。根據模型得到的計算強度與試驗強度擬合的非常好，相關系數非常高。
  20. In attempt to prepare and study the novel electrically conductive nanocomposites, with polyethylene ( pe ) served as the matrix, maleic anhydride grafted polyethylene ( gpe ) served as eg intercalates and expanded graphite ( eg ) served as a conductive filler, prepared gpe / eg, pe / gpe / eg electrically conductive composites via solution intercalation ( si ), direct melt mixing ( dmm ) and master batch melt mixing ( mmm ) methods. by means of testing conductivity and mechanical property, with the measures of tem, sem, om, xrd and dsc, studied the relationship between preparation method, material composition, and electrically conductive as well as mechanical property. the main outcomes never reported at home and abroad literature were obtained as follows : 1 the gpe / eg electrically conductive nanocomposites were prepared via si method

    本論文以制備和研究新型高分子導電納米復合材料為目的，以聚乙烯（ pe ）為基體，馬來酸酐接枝聚乙烯（ gpe ）為插層劑，膨脹石墨（ eg ）為導電填料，採用溶液插層（ si ）法、直接熔體混合（ dmm ）法和兩者相結合的熔體母料混合（ mmm ）法制備了gpe eg 、 pe gpe eg導電復合材料，通過電導率和力學性能測試，運用tem 、 sem 、 om 、 xrd和dsc等手段，研究了制備方法、材料組成、形態結構和導電性能及力學性能之間的關系，得到以下未見國內外文獻報道的研究結果： 1採用si法成功制備了gpe eg導電納米復合材料，其導電逾滲閥值（ _ c ）為1 . 59vol ，遠低於dmm法制得gpe eg常規復合材料的_ c （ 3 . 13vol ） 。
分享友人
分享到 Line

分享到臉書