滴量計 的英文怎麼說

中文拼音 [dīliángjì]
滴量計 英文
drop meter
  • 滴 : Ⅰ動詞（液體一點一點地向下落） drip Ⅱ名詞（一點一點地向下落的液體） drop; droplet Ⅲ量詞（用於滴下的液體的數量） drop
  • 量 : 量動1. （度量） measure 2. （估量） estimate; size up
  • 計 : Ⅰ動詞1 （計算） count; compute; calculate; number 2 （設想; 打算） plan; plot Ⅱ名詞1 （測量或計算...
  1. The structure of air - blast pipe was improved on. an orienting object was installed based on theoretical analysis, that increase the spraying span. it has been found that both spraying span and droplets uniformity improved, by installing the orienting object. according to the results of a great number of experiments, orderliness of droplets diameter along the spraying span was researched, and rational spraying span of air - assisted sprayer was suggested

    通過試驗檢驗噴霧機樣機的噴霧性能，並提出對各項參數的優化設計方案。通過正交試驗和對比試驗對霧滴取樣，證明導流器的安裝不僅增加了噴幅，而且還提高了霧滴均勻性系數。根據大量試驗的結果分析，找出了霧滴直徑在噴幅方向上所呈現的變化規律，並提出了合理的噴幅范圍。
  2. Piston - operated volumetric apparatus - piston burettes

    活塞控制的體積測量儀.活塞滴定計
  3. In this thesis, the development of emulsion polymerization theory and related new technologies are comprehensively reviewed, and the synthetic technologies of acrylate latex modified by organosilicon both at home and abroad are also reviewed. based on the current development and research in this field, attentions of this study are focused on three ways for preparing novel acrylate latexes modified by organosilicons, that is, 1 ) the acrylate monomers are copolymerized with unsaturated silicons by emulsion copolymerization ; 2 ) a new latex with microphase separation morphology is synthesized, which shows a core - shell structure character ; 3 ) soap - free polymerization is explored for preparing a higher - performance latex using an unsaturated silicon monomer, different acrylates and a reactive emulsifier. by using techniques of delaying addition of organosilicon monomer and a hydrolysis inhibitor, the hydrolysis and condensation of 3 - ( trimethoxysilyl ) propyl methacrylate during polymerization can be effectively prevented, as a result, organosilicon content in the macromolecular chain is increased

    同時採用有機硅單體延遲滴加及添加水解抑制劑等技術，有效防止了-甲基丙烯酰氧基丙基三甲氧基硅烷在乳液聚合過程中的過渡水解及縮合反應，提高了聚合物大分子鏈中有機硅鏈節的含量；利用紅外光譜與差示掃描量熱儀對產物分子結構進行了表徵，並通過對共聚產物力學和吸水率的測試，證實了本研究所制備的有機硅改性丙烯酸酯共聚物具有比純丙烯酸酯聚合物更優良的力學及耐水性能；從分子設計角度出發，利用醇解反應合成出水解、縮合反應速率較慢的兩種新型不飽和有機硅單體： ?甲基丙烯酰氧基丙基三乙氧基硅烷和?甲基丙烯酰氧基丙基三異丙氧基硅烷；利用核磁共振對新型硅烷單體結構進行了證實；研究表明利用新型硅烷單體可以制備出高硅烷含量的有機硅改性丙烯酸酯乳液，且其聚合產物具有較高的力學及耐水性能。
  4. The company has workshops for product designing, carving, die - casting, polishing, electroplating, laser engraving, drop moulding, grinding, painting, tin soldering, brazing, silver soldering and spot welding, as well as quality test center

    公司下設產品設計、刻模、壓鑄、拋光、電鍍、激光雕刻、滴塑、磨砂、畫漆、錫焊、銅焊、銀焊、點焊車間及產品質量檢測中心。
  5. According to statistics parameters of the typical clouds over xi ' an region and cloud data obtained from the global distribution of cloud cover under the auspices of world meteorological organization, for xi ' an region typical cloud, the parameters of khragian - mazin cloud drop size distribution are obtained. based on xi ' an cloud water content profile, on earth - space paths, attenuation due to cloud are calculated by means of the k - m distribution. it is shown that the attenuation induced by cloud are taken into account at ka - at elevation angle smaller than 30 and v - band paths

    第三，根據西安地區氣象觀測數據，討論了西安典型雲的宏觀和微觀物理特性；根據西安典型雲的觀測結果和世界氣象組織提供的數據，得到西安典型雲的k - m雲滴譜參數；並根據西安地區雲的液水含量，計算了地一空路徑上雲的衰減，結果表明，在v波段和仰角小於30度的ka波段路徑，雲的衰減需加以考慮。
  6. With the numerical solution, an internal condensation critical curve can be calculated out by condensation theory and depositing theory, on the curve, the enter water ability equal to the out water ability, which can be used as the basis to determine the occurrence of internal condensation. but the result doesn ’ t coincide with the real completely. in this dissertation, we plan to get the critical curve by practical experiment results, because that the enter water ability only relates to the condensation density and the out water ability only relate to the volume ratio of the pneumatics system

    然而由凝結理論和沉積理論得到的計算結果往往與實際有一定偏差，本課題希望通過實驗的方法獲得內部結露臨界線，即系統進水能力和排水能力相等的曲線，由於系統的進水能力和充放氣過程中凝結水滴密度有關，排水能力和系統容積比有關，可以通過大量實驗總結出以凝結水滴密度和容積比表示的內部結露臨界曲線，作為判別內部結露是否發生的依據。
  7. Abstract : with pc - controlled liquid drop counter, protective atmospher es of ball annealing of wires is strictly kept. pickling is easily gained in proc ess of ball annealing of wires and quality wires are produced

    文摘:採用電腦液體滴速計數儀，嚴格控制針布齒條用規格鋼絲球化退火的保護氣氛，防止和消滅針布齒條在球化退火過程中出現的表面不易酸洗現象，提高了鋼絲的表面質量。
  8. As to the simulation, three - dimensional n - s equations and two - phase flow model, in which the liquid toluene spray as discrete particles was considered, were employed to describe the turbulent combustion processes in the combustion chamber. the mass and energy transfer between the two phases were calculated by the droplet evaporation model, and the arrehnius model was used to obtain the gas chemical reaction rate. the details of 3d flow field, the distributions of temperature and compounds were obtained by solving the equations

    數值模擬方面，應用三維湍流n - s方程以及顆粒軌道模型描述了激光器燃燒室內部的噴霧兩相燃燒流動過程，兩相之間的質量、能量交換由液滴蒸發模型計算，氣相化學反應速率由arrhnius公式計算，通過耦合求解氣液兩相模型方程，模擬了燃燒室三維流場，得到了燃燒室內的溫度和組分濃度分佈。
  9. The pilot fuel model has been given to calculate the distribution of the liquid fuel and time of fuel pre - combustion, at the same time, analyzing the important action to the combustion of the natural gas in the combustion chamber of engine, determining the best quantity of pilot fuel. the explosive combustion model has been established to compute the pressure of the cylinder during the combustion, determining the main influence factors. the emission model has been established to forecast the co, nox emission

    理論方面，提出了基於化學反應的燃燒模型?多組分氣相反應系統的化學反應動力學模型，以此進行雙燃料發動機的熱力學?化學反應動力計算；引燃油燃燒模型，計算引燃油液滴的分佈規律和滯燃期，驗證引燃油在雙燃料發動機燃燒過程中的作用，揭示不同噴油規律對雙燃料發動機的影響，確定在不同負荷下的合理引燃油量；爆震模型，揭示爆震與工質能量釋放間的關系和影響爆震的各種運轉因素，確定合理的爆震依據，減小爆震傾向。
  10. The key items influent on the characteristics of spraying have been also studied in the dissertation, we can get a good spraying result by adjusting the related parameters efficiently. ( 3 ) the theoretical model of the dynamical parameters such as temperature, moisture, pressure and contour for hot medium and particle inside the drying chamber were obtained by model, utilized the computational fluid dynamics technique to solve the problem between spraying droplets medium by arranging the double grid dispersing structure and rotary outlet structure and the developed structure improved the drying efficiency and product quality

    （ 3 ）採用-模型實現了壓力噴霧乾燥塔的溫度場、濕度場、流場的理論建模，利用計算流體力學（ cfd ）技術來解決噴霧乾燥過程中熱介質與霧滴間的傳熱傳質以及動量傳遞和湍流擾動等問題，避免了乾燥過程中的設計不合理狀況；通過增加雙格柵均風裝置和旋轉出風裝置，改善了乾燥塔內的熱質傳遞，提高了乾燥塔的體積蒸發強度。
  11. Eight trapezoid labyrinth flow - channels are designed through modification to the cell dimension and the number of flow cells based on the parameterized structural design. integral emitter prototypes combining exterior hull and exterior flow - channel are built using rapid prototyping technique, and structural dimension of those flow - channel are measured by optical microscope, the measuring results showed that the design can completely meet the requirement of emitter accuracy

    文中以參數化的設計思想，通過改變梯形迷宮流道單元尺寸和單元數設計了8種梯形迷宮流道，採用快速成形技術製作出外管與內迷宮流道一體化的滴頭原型；利用最小標注尺寸為50nm的光學顯微系統對滴頭流道結構尺寸進行了測量，分析結果顯示流道尺寸精度完全滿足滴頭的製作要求。
  12. ( l ) it is very important for the state repair of diesel enging in our country ; ( 2 ) it will help with the more accurate decicision of repair cycle of the engine ; ( 3 ) it will improve the combustion state of the diesel enging and will keep the oil comsume at a lower level, at the same time, it lessens the dilute of the lubricanting oill in the engine. there are still some more research work to do, for it is just the begining. the mathematic model should be made and more accurate data rule should be established

    （ 1 ）為推行內燃機車狀態修做準備，這在跟蹤國際機車檢修先進技術上有著十分重要的意義； （ 2 ）為更合理制定內燃機車的檢修周期提供實驗分析方法和數據，試驗數據作為每臺柴油機的技術資料被存儲，藉助計算機軟體系統可以輔助制定機車的檢修計劃，使機車的檢修工作更科學合理； （ 3 ）提高機車質量，降低檢修費用； （ 4 ）改善柴油機燃燒狀態，降低燃耗，節約運營成本，同時，可以減少燃油滴漏，降低滑油消耗。
  13. Aiming at the difficulty of the titer measurement and ending judgment, the dissertation brings forward the resolution project and presents the collectivity design

    針對滴定法中滴定劑耗用量測量與終點判斷容易產生較大誤差這一問題，提出了解決方案，給出了濃度測定儀的總體設計方案。
  14. Standard test methods for water in crude oils by coulometric karl fischer titration

    用電量計卡耳費瑟滴定法測定原油中水的標準試驗方法
  15. This provides an extremely lightweight and strong racing machine, where the geometry of the frame is tailored by working the tube sets to create the perfect ride. at hang lun we take the design, fabrication, and material selection process very seriously, creating the best product possible for the intended application ; making bikes go fast

    為了使車架的設計更加完美並滿足輕量化幾何學結構空氣動力學的要求，管材的加工採用專用的設備保證其精密的尺寸，管形被設計加工成橢圓水滴錐管垂直橢圓等各種形狀，再經過工藝要求很高的氬弧焊接和外表面的手工打磨處理。
  16. Study shows that the effect of the shock of heavy rain on an airplane in the low - level wind shear of thunderstorms is evident, the flight resistance resulted from the roughness of airplane is able to change the flight track and endanger the flight safety, whereas, the increase in the mass of airplane caused by the water film on the airframe and its wings in heavy rain is nigligible

    結果表明：雷暴低空風切變中大雨雨滴的沖擊作用是明顯的，被粗糙化的機體所產生的阻力能顯著改變飛行軌跡，並能影響飛行安全；累計在機身和機冀上的水膜厚度造成的飛機質量的增加對飛行的影響可以忽略。
  17. The horizontal and vertical momentum loss caused by the shock of heavy rain in low - level wind shear of thunderstorms on the airframe and wing are analyzed, the water film thickness on the airframe and wings estimated, and the flight resistance resulted from raindrops - striking caused by the roughness of airplane when the heavy rain shocks the airplane is discussed

    摘要分析了雷暴低空風切變中大雨滴沖擊飛機的機身和機翼而引起的水平和垂直動量損失，估算了大雨累計在機身和機翼上的水膜厚度，並討論了因遇到大雨雨滴沖撞而粗糙化的機體所產生的阻力。
  18. Insulating liquids. oil - impregnated paper and pressboard. determination of water by automatic coulometric karl fischer titration

    絕緣液體.浸油紙及浸油紙板.用自動庫侖計卡爾費歇爾滴定法測定水含量
  19. In this paper, we study the influence factors about acid - base titration jump and the stoichiometric point deducing approximate calculation formula of acid - base titration. some useful results are obtained

    摘要本文推導出了強酸強堿、一元弱酸弱堿、多元弱酸弱堿滴定突躍、化學計量點的近似計算式，用公式說明了影響滴定突躍的因素及化學計量點的位置，並得出了一些重要結論。
  20. The machine must be watertight, measuring exact and structure easy. either a big bottle or a small one can be use not neccessary to change the accessories, to adjust it is ok.

    本機採用技術先進的灌裝閥，杜絕滴漏，計量更精確，設備結構簡單，大小瓶通用無需更換配件，調整即可。
分享友人
分享到 Line

分享到臉書