滿載壓力 的英文怎麼說

中文拼音 [mǎnzǎiyālì]
滿載壓力 英文
full-load pressure
  • 滿 : Ⅰ形容詞1 （全部充實; 達到容量的極點） full; filled; packed 2 （滿足） satisfied; contented; conte...
  • 載 : 載Ⅰ名詞（年） year : 一年半載 six to twelve months; six months to a year; 三年五載 three to five ...
  • 壓 : 壓構詞成分。
  • 力 : Ⅰ名1 （力量; 能力） power; strength; ability; capacity 2 [物理學] （改變物體運動狀態的作用） forc...
  • 滿載 : 1 （運輸工具裝滿了東西） loaded to capacity; fully loaded; laden with; fully laden; overall loadi...
  1. By the large quantity of indoor and field soil mechanics test, this paper investigated physics and mechanics property of xigeda stratum and xigeda compounding filling, profoundly and systematically studied on shearing strength, cbr ( including indoor cbr and field cbr ) and intensity feature of xigeda compounding filling. the new achievement and cognition as follows : ( 1 ) cbr value is decided by moisture content and mudstone content of xigeda compounding filling. the filling material can satisfy minimum intensity standard of express highway when mudstone content is less than some fixed value, ( 2 ) this paper established field cbr standard value which can synthetically evaluate the filling material nature and field compaction degree. ( 3 ) the optimal compacting mean of xigeda compounding filling is hard oscillation first and weak oscillation later, not traditional way which is weak oscillation first and hard oscillation later. ( 4 ) this paper put forward the conception of optimum moisture content in construction different from optimum moisture content of indoor impaction

    本文以昔格達填料強度特徵為研究對象，通過大量的室內及現場試驗，從昔格達地層巖組的物理力學性質、昔格達填料的物理性質入手，對昔格達填料的抗剪強度、室內承載比及現場承載比特徵進行了較系統地研究，獲得了如下認識及進展：昔格達混合填料承載比值受填料含水量及其中泥巖含量的影響，當泥巖含量小於一定值時，昔格達混合填料具有較高的承載比值，能夠滿足高速公路對填料的最低強度要求；建立了綜合評判昔格達填料性能及現場壓實效果的現場承載比（ cbr ）標準；對于昔格達填料而言，最佳的碾壓方式為先強振后弱振而不是傳統的先弱振后強振；提出了與室內擊實最優含水量相區別的施工最佳含水量的概念。
  2. The research shows that : 1 ) the ductility of the hsc bending members constructed is much greater than 5 ; 2 ) increasing the vertical links and distribution steel can increase the deflection under ultimate moment ; 3 ) with appropriate compressive bars, vertical links and distribution steel the increase of moment after yield and the decrease of moment under ultimate moment can be ignored, so the ductility of the hsc bending member is much larger ; 3 ) the width / depth ratio of hsc bending member has no obvious effect on the ultimate compressive strain of concrete ; 4 ) the method used here to calculate the deflection is applicable ; 5 ) the location of crack coincides with the location of vertical links and distribution steel ; 6 ) the bending property of the hsc structure under the blast load can meet the demand of protective engineering

    研究表明：本文研究的梁、板構件的延性比遠大於5 ；增加箍筋（鉤筋、分佈筋）含量，可以提高壓區混凝土剝落時的撓度；在適當的受壓筋、箍筋（鉤筋、分佈筋）含量下，可以忽略壓區混凝土剝落瞬間的承載力下降，從而大大提高構件的延性；受彎構件的寬高比對壓區混凝土極限應變的影響不明顯；受彎構件的裂縫間距受箍筋（鉤筋、分佈筋）的布置影響；文中所用的承載力和變形計算方法是可行的。化爆試驗表明，高強混凝土構件的動載抗彎性能能夠滿足防護結構的要求。
  3. The main research is below : ( 1 ) the influence to intensity and rigid with corner angle ( 60, 75 and 90 degree ) of crack and the board axes ( 2 ) do a fem stress / strain and crack growth simulation analysis when the corner angle of crack and the board axes is 60 degree ( 3 ) do a intensity resume analysis for the structure which is repaired with a titanium patch in a mechanical way when the corner angle of crack and the board axes is 60 degree through simulation analysis for three failure criterion, we have : ( 1 ) in 60, damage extend quickly with damage analysis in hashin criterion ; it is slower for analysis in maximum stress or hashin - rotem criterion. ( 2 ) in special term ( physical condition incision, shape or maximum load ) the compression strength of the stiffened plate will decline 45 % ~ 50 % under compression loads

    通過採用三個不同損傷判據的數值模擬模擬，得到如下結論： （ 1 ）在60時，用hashin判據進行的損傷分析，損傷擴展較快；最大應力及hashin - rotem判據進行的損傷分析，損傷擴展基本相當，且較慢； （ 2 ）在所給加筋板的物理條件、切口大小及形狀、最大載荷等一定的條件下，該加筋板在壓縮載荷作用下，其壓縮強度下降了45 50 ； （ 3 ）在本文提及到的機械連接修理方法以及載荷條件下，修理后的結構強度恢復能夠滿足戰時要求。
  4. In the reform of the power grid of north mining bureau, the active power line conditioner was used for meeting with the requirement of power supply quality and the requirements of voltage changing and sensitive load in power transmission

    摘要為滿足礦務局供電電能質量的要求和電能傳輸中的電壓變化和敏感負載的需求，在礦務局北網電網改造中採用了有源電力調節器。
  5. When ordering overload relays, specify horsepower, voltage and full load current per motor nameplate

    訂購過載繼電器時，請註明每臺電機的功率馬力、電壓和滿載電流。
  6. According to the no - loading waveform deviation factor, the prototype conforms to the national design standard and practical needs in the engineering. more important, the high voltage is achieved. in the condition of considering core saturation and damping winding influence, the influence to powerformer of the no - loading tooth harmonic emf is smaller than conventional generator, and the waveform deviation factor of the former is smaller, too

    由求得的樣機空載電勢波形畸變率可知，該樣機滿足國家設計標準和工程實用要求，更重要的是，實現了產生高壓的目的；考慮鐵心飽和、考慮阻尼繞組影響情況時，電力發生器與具有相同尺寸（除定子槽形）的傳統發電機相比，空載齒諧波電勢對電力發生器的影響較小，前者的空載波形畸變率較小。
  7. Based on the tests, the advised formula of normal section bearing capacity and inclined section bearing capacity of high strengthen concrete frame columns are put forward, and the limit of axial compressive ratio and the minimum stirrup ratio in the encrypted region which meet ductility requirement to c60 concrete frame columns are given

    在試驗研究的基礎上，提出高強混凝土框架柱正截面和斜截面承載力計算的建議公式，且給出了滿足延性要求的c60混凝土框架柱軸壓比限值和箍筋加密區箍筋的最小體積配箍率。
  8. The method can meet fully the need of the evaluation of the scuffing load capacity to all kinds of worm gear oil. the different kind of additives and varied contents of additive have obvious influence on the scuffing load capacity of worm gear oil. for mixing worm gear oil, the additives that suitable for worm gear oil should be made of anti - wear additive which is the mainly component and a little extreme pressure additive which has a gentle performance

    試驗研究結果表明：本文研究開發的蝸輪蝸桿油膠合承載能力臺架評定方法具有較好的重復性和區分性，能夠滿足評定各種蝸輪蝸桿油膠合承載能力的需要；添加劑的不同類型及不同復配形式對蝸輪油的膠合承載能力有著較明顯的影響；在調制蝸輪蝸桿油時，適用於蝸輪蝸桿油的添加刑，應以油性劑為主劑，復加少量的性能較溫和的極壓抗磨劑。
  9. Abstract : this paper mainly introduces the composition of the powerplantmodule hydraulic loop of the combinable full trailer, analyzes the pressure distribution and calculates the pressure of hydraulic suspension system with fullload, and on the basis of the above analysis, we have chosen the model of hydraulic pump and diesel engine

    文摘:主要介紹組合式全掛車動力機組液壓迴路組成，對滿載時的液壓懸掛進行受力分析和工作壓力計算，並以此為依據對液壓泵和柴油機進行選型。
  10. At first, the experiment carried out by tianjin university has been analysed according to the " nonlinear balance trying calculation " method, and the values of yield load and ultimate load agree with the test result better, and the curve of bending moment - curvature, bending moment - deflection can agree with the results. the second, the simplified formula for evaluation the ultimate flexural capacity of cfrp strengthened rc members is presented according to the three probable failure modes ( compression failure ; cfrp rupture ; crushing of the concrete in compression before yielding of the reinforcing steel ). it is applicable to both singly and doubly reinforced rectangular sections, as well as flanged sections

    首先利用鋼筋混凝土非線性平衡試演算法對天津大學試驗進行了理論分析，所得分析值與試驗結果相比，加固梁的屈服荷載、極限荷載能夠很好地吻合，彎矩曲率關系曲線及彎矩撓度關系曲線較為吻合；其次，為了滿足實際工程的需要，根據碳纖維布加固構件可能發生的三種破壞形態（壓區混凝土壓碎破壞、碳纖維布拉斷破壞以及受拉鋼筋尚未屈服時壓區混凝土已壓碎破壞） ，區別三種鋼筋混凝土構件截面形式（單筋矩形截面、雙筋矩形截面、 t形截面） ，分別給出了碳纖維布加固混凝土構件抗彎承載力的簡化計算公式和適用條件，並進一步探討了這三種截面形式下進行加固設計和復核的步驟。
  11. Repetitive control is used to reduce voltage distortion under abrupt load variation or nonlinear loads and attain good quality of the voltage waveform ; current loop is designed to quicken the dynamic response and strengthen the ability of the inverter control

    重復控制可以抑制逆變電源在負載變化嚴重（空載加到滿載）或者非線性負載條件下的輸出電壓畸變，保證輸出波形的質量；電流環用以改善輸出波形的動態響應特性，提高逆變控制的能力。
  12. Finally according to the load - capacity superposition concept, a simplified design equation for determination of the load capacity of circular composite columns with h - shaped and box - shaped structural steel is proposed. through comparison with the accurate computer - based method, it is found that the proposed simplified equation is accurate enough and can meet the requirement of practical applications

    同時基於承載力疊加的概念，提出了配置工字型和箱型結構鋼的圓形截面組合柱在單向和雙向偏壓荷載下的承載力簡化計算公式，通過與精確的計算機數值迭代方法的比較發現，當荷載偏心較小時該簡化計算公式具有足夠的準確度，能夠滿足工程應用的要求。
  13. Numerical simulation also conf irm this analysis that the fluid elastic - plastic model can approximately describe the shock compression and release process of ofhc copper in the teens gpa range, but for precise description, especially in the initial release stage, more detail constitutive model is needed

    數值計算結果也支持了這種分析：在十幾個gpa的壓力范圍，無氧銅的沖擊加載-卸載過程近似滿足流體彈塑性模型，但在精確描述，尤其對初始卸載階段的描述上，仍需要更準確的本構方程和物理模型。
  14. With the digital control, volume of compressive oil provided by hydraulic power unit in actuator can be regulated to modulate the test load value. in conformity with the idea, we developed two systems - force and displacement control system in this paper

    根據這一設計思想，我們依據被控參量開發了兩個液壓加載分系統：力控制系統和位移控制系統，以滿足不同的試驗需求。
  15. The distance from figure center of the parabola to the potential slide surface is less than half of the section length. mechanical conditions of this method include not only force equilibrium but also moment equilibrium. as for the beam - on - foundation, its pressure can be calculated by homogeneous hypothesis or winkler foundation hypothesis or infinite half elastic foundation hypothesis on the pulling anchor - cable step and by coulomb active earth pressure theory approximatively on the long term working step

    對于樁在滑面以上段所受的坡體荷載，提出可按形心偏下的拋物線型分佈模式計算，並在滿足力的平衡條件的同時還滿足力矩平衡條件；對于地樑上作用的坡體荷載，提出在錨索張拉階段可按均布或溫克爾（ winkler ）地基假定或彈性半無限體地基假定來計算，在工作階段則一般可以近似按庫侖主動土壓力理論計算。
  16. The compression experiment after impact is discussed in the paper. also, the compression damage force after different impact energy and the strain response of different position are presented. it is a satisfying method for experimental research to find the strain distributing in impact and cai, as well as the compression strength of cai

    同時本文還進行了沖擊后的壓縮試驗，對編織型復合材料在不同沖擊能量下的壓縮破壞載荷，及損傷后不同位置的響應進行了記錄和討論，是一個全面考察沖擊和沖擊后壓縮的應力分佈和研究破壞載荷及剩餘強度的較為滿意的實驗研究方法。
分享友人
分享到 Line

分享到臉書