澆口 的英文怎麼說

中文拼音 [jiāokǒu]
澆口 英文
[冶金學] running gate; runner; git; flow gate; feeder; gate; in-gate; cast gate; pouring head; runner pipe; running head; sprue
  • 澆 : 澆名詞（姓氏） a surname
  • 口 : Ⅰ名詞1 （人或動物進飲食的器官; 嘴） mouth 2 （容器通外面的地方） mouth; rim 3 （出入通過的地方） ...
  1. On most automotive battery grids, cooling is required in the top gate area and in the center of the mold only.

    絕大部分汽車蓄電池板柵尺需要在頂部澆口部分和模具的中心冷卻就可以。
  2. In this paper, the reason and process of hot tear forming for the investment steel castings are analysed, the technological method of preventing hot tear is discussed, and the designing method of the self - cut - gate for shifting hot tear is introduced

    分析了熔模鑄鋼件熱裂產生的原因和過程，論述了防止熱裂的工藝措施，並介紹了自割內澆口轉移熱裂及其設計方法。
  3. 6, no cut gate, play down labour force of worker

    六免剪澆口，降低工人勞動費用。
  4. Tools for moulding - sprue pullers iso 16915 : 2003

    模鑄工具.直澆口拉出器
  5. Components of injection mould for plastics. universal sprue bush

    塑料注射模零件.通用澆口套
  6. Tools for moulding - sprue bushes - dimensions

    模鑄工具.澆口套.尺寸
  7. Tools for moulding - sprue pullers

    鑄模用工具.直澆口拉出器
  8. Tapered end mills for trapeziform runner with parallel shanks

    直柄梯形澆口用錐型端銑刀
  9. The computer simulation results showed that the effects of ingate dimension and ingate location on the rheo - diecasting were relatively small, and the casting process - design was easily to be done ; under the same condition, the semi - solid rheo - diecasting decreased the air entrapment during the mould filling process, and high quality metal castings could be obtained through semi - solid forming technology

    結果表明：半固態流變壓鑄成形在不同的內澆口尺寸與位置條件下都可以獲得平穩的充型流動場，其工藝參數設計靈活；同等條件下，半固態流變壓鑄成形的型腔充填過程平穩，成形鑄件的質量優于液態壓鑄成形。
  10. The research showed that basin is the more important feeding resource than runner in runner type gating system in lost wax casting. therefore, on the basis of the basin as feeding resource, runner and ingate as feeding channel, a new design method for runner type pouring and feeding system in investment casting was developed. the corresponding feeding mathematical pattern and allowable total weight listed for casting cluster with different basin were established after analyzing the practical feeding of basin and the calculating process for design was described in detail

    在熔模鑄造橫澆道型澆注系統中，澆口杯是比橫澆道更為重要的補縮源，因此在立足於澆口杯為補縮源、橫澆道和內澆道為澆注補縮通道的基礎上，開發了適用於熔模鑄造橫澆道型澆注補縮系統設計的新設計方法，在詳細分析了澆口杯的實際補縮情況后，建立了相應的數學補縮模式和不同澆口杯的鑄件組許用鑄件總質量表，並具體介紹了設計計算過程。
  11. Performance and usage ： they are mainly used to process polgolefin thermoplastics, e. g : plastic basin and barrel ； plastic bottle and can ； plastic hollow container and tool ； woven bag, agricultural film and packaging film materials ； similar leftover bits and pieces of industrial material, pouring materials, etc

    性能用途：主要用於加工聚烯類熱塑性塑料如：塑料盆、桶；塑料瓶、罐；塑料中空容器具；編織袋、農地膜、包裝膜類材料；以及同類邊角余料、澆口料等。
  12. Find the law of the influence from the injection pressure to the filling time and the cavity pressure and make certain of the best filling time, injection time and injection pressure. though the analysis of the flowing velocity and pressure spread of the key position element in the injection parts in different gate position, we forecast the injection parts quality and the possibility injection flaw and its position, optimize the gate position. in this paper, though the research of analogue of the runner system of metal - powder injection molding and the process of injection molding, we get the law of how the injection parameter influence the injection process

    在相同的注射條件下，通過分析喂料在不同直徑和長度流道中的流動規律，得到了喂料在流道中的速度場、壓力場和溫度場，找到了流道長徑比的合理取值范圍，並得出通過改變流道設計可實現對現有設備資源充分利用的結論；給出了不同注射壓力下，型腔壓力與充模時間關系曲線和喂料熔體平均充填速度與充模時間關系的曲線，得到了注射壓力對充填時間和型腔壓力的影響規律，確定了最佳的充模時間、注射時間和注射壓力；通過分析採用不同位置澆口注射時注射件關鍵位置單元的流動速度和壓力分佈，預測了注射件的成形質量，或可能產生的注射缺陷及位置，優化了澆口設置。
  13. Check sizes of gates, runners and cavity

    檢查澆口，流道和模腔尺寸
  14. Components of injection mould for plastics. gating insert

    塑料注射模零件.澆口套
  15. A. the ultimate structure diffluence plate decided by runner

    A .分流板的最終結構由澆口位置決定。
  16. Hot runner benefit is delivered at pressure, model can be overcome on certain level the hollow that be not worth as a result of filling makings and forms, shrinkage cavity, be out of shape wait for blemish

    熱澆口利於壓力傳遞，在一定程度上能克服塑件由於補料不足而形成的凹陷、縮孔、變形等缺陷。
  17. Flow mark is the imprint of the movement of melting materials and is in linear pattern to surround runners. the flow mark is resulted from fast condensation of materials inside the mold cavity and is the lines caused when the materials run in

    流紋flow mark是熔融材料流動的痕跡，以澆口為中心而呈現條紋形狀，流紋是先注入模腔內之材料冷卻過快，而與其後流入之材料間形成界線所致。
  18. Modify the gate so that the melt flow goes towards the wall of the cavity to achieve a regular melt flow

    修改澆口，使熔化料流到模腔壁處，從而有規則流動
  19. It has exact processing and heat treatment gate bushing, the part of heat can be delivered to the steel around the gate which make the plastic just enter wouldn ' t be frozen so quickly. it applies to crystalline materials

    帶精確加工及熱處理的一體澆口司，能傳遞部分熱量至澆口區域的金屬，使得剛一進入型腔的塑料不至於迅速凝固，適于快速凝結的結晶性塑膠。
  20. The present study is focused on exploring the reasons of huge warpage and how to reduce it for pa66 / gf30. the wrong orientation of glass fiber causes the warpage ; however, remodeling the gate and increasing the wall thickness can cause the glass fiber to settle in the right orientation

    本文分析了pa66 / gf30製品產生翹曲變形的原因是由於玻璃纖維的取向不合理，通過改變澆口和增加製品的壁厚可以改變玻璃纖維的取向從而有效降低翹曲變形量。
分享友人
分享到 Line

分享到臉書