濃化材料 的英文怎麼說

中文拼音 [nónghuàcáiliào]
濃化材料 英文
enriched material
  • 濃 : 形容詞1. （液體或氣體中所含的某種成分多; 稠密） dense; thick; concentrated 2. （程度深） （of degree or extent） great; strong
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  1. The cholesteryl liquid crystal mixture was microcapsulized by complex coacervation method using gelatin and acacia as membrane materials. the effects of the concentr ation and quantity of arabic gum on the microcapsule particle size and color showing were also studied

    最後，採用以明膠?阿拉伯樹膠為囊壁材料的復凝聚法對配製的顯色示溫混合液晶進行了微膠囊化處理，並著重討論了阿拉伯樹膠的濃度及用量對液晶微膠囊粒度及顯色效果的影響。
  2. Phenolic foam is a new generation heat preservation prevent fire soundproof material and polystyrene together ammonia ester foaming rubber etc, material to compare, and it is good that its biggest characteristics is a heat - proofound the low temperature contractility is smatt, and have te special prevent burning wit the size stability under 2000 heat, not burning, not melt not contract constant form not poisonous spirit hove no thick smoke, just surface formation layer

    信息內容：酚醛泡沫為新一代保溫防火隔音材料與聚苯乙烯聚氨脂發泡橡膠比，其最大特點是耐熱性好，低溫收縮性小，具有獨特的阻燃和尺寸穩定性，在焊槍火焰下，不燃燒不收縮不變形，無毒氣無濃煙，只是表面炭化，性質穩定，耐化學腐蝕抗老化。
  3. The development of renewable amperometric is a possible way to circumvent the problem. here, antigen ( antibody ) is immobilized with graphite ( carbon ) and carrier on a transducer, the analyze is measured through on enzyme catalytic reaction after sandwich or competitive immunoreaction

    將抗原（抗體）與石墨或者碳固定在載體材料中，在一個競爭性的或者夾心式的免疫反應后，將酶標抗原（抗體）鍵合在傳感器表面，通過一個酶催化反應來確定待測抗原（抗體）的濃度。
  4. The development of renewable amperometric is a possible way to circumvent the problem. here, antigen ( antibody ) is immobilized with graphite ( carbon ) and carrier on a transducer, the analyze is measured through on enzyme catalytic reaction after sandwitch or competitive immunoreaction. the surface of immuno - sensor can be renewed by used in a new immunoassay

    將抗原（抗體）與石墨或者碳固定在載體材料中，在一個競爭性的或者夾心式的免疫反應后，將酶標抗原（抗體）鍵合在傳感器表面，通過一個酶催化反應來確定待測抗原（抗體）的濃度。
  5. We used fission yeast schizosaccharomyces pombe ( s. pombe ), an unicellular eukaryotic organism, as research material. electroporation was adopted to load ca2 + fluorescent indicator into yeast cell and under the laser scanning confocal microscopy ( lscm ), we observed cytosolic ca2 + distribution and relative content as well as fluorescence intensity of gfp - cam in different phases of cell cycle of yeast cell. flow cytometry provided a way of determining the relative dna content of populations of fission yeast

    本文以單細胞的真核模式生物裂殖酵母（ schizosaccharomycespombe ）為研究材料，通過激光掃描共聚焦顯微鏡觀察酵母細胞胞質內游離ca ~ （ 2 + ）的分佈及相對濃度，以及不同周期時相細胞中gfp - cam的熒光強度變化，並採用細胞流式法對酵母細胞的相對dna含量進行測定以確定細胞所處周期時相。
  6. Their properties have been investigated by using scanning electronic microscopy ( sem ), differential scanning calorimetry ( dsc ), x - ray diffraction ( xrd ), thermogravimetry - differential thermal analysis ( tg - dta ), infrared spectroscopic analysis ( ir ), and gas chromatography ( gc ), etc. the effects of the mulser ' s stirring rate and the emulsifier concentration on the properties of encapsulated pcms have been systematically studied, and nanopcms have been obtained by increasing the stirring rate or the emulsifier concentration. the influences of different nucleating agents on micropcm performances have also been investigated in detail to search for a suitable nucleating agent to prevent micropcms from super - cooling

    首先，系統研究了乳化機轉速和乳化劑濃度對膠囊性能的影響，並通過提高轉速或乳化劑濃度獲得相變材料納膠囊；其次，系統研究了不同成核劑對微膠囊性能的影響，找到合適的成核劑抑制了相變材料微膠囊的過冷現象；再次，詳細研究了環己烷對膠囊性能的影響，並通過添加適量環己烷提高了相變材料微膠囊及納膠囊的耐熱溫度。
  7. Abstract : experiments were made on a ultrasonic machining tool with work - piece adhered to ultrasonic transducer head, to machine micro - holes on hard and brittle materials such as soda glass and si, to study the effects of tool materials ， work - piece materials ， amplitude ， machining load ， slurry concentration ， tool length and the size of work - piece on machining rate and wear ratio. in this experiment, the micro - tool was made through wedg

    文摘:通過以wedg放電加工手段製作微細超聲加工用工具，在採用工件加振方式的微細超聲加工機上對碳酸玻璃、半導體硅等硬脆材料試件進行微孔加工的實驗，來探討在某一特定加工條件下工具材料、工件材料、工件的振幅、加工靜載荷、磨料懸浮液濃度、工具長度及工件尺寸等重要因素對加工速度、工具損耗率的影響，為微細超聲加工技術的實用化提供參考依據。
  8. This paper introduces the latest progress of high level radioactive waste disposal programs in the world, and discusses the key scientific issues as follows ： ( 1 ) the precise prediction of the evolution of a repository site ; ( 2 ) the characteristics of deep geological environment ; ( 3 ) the behaviour of deep rock mass, groundwater and engineering material under coupled conditions ( intermediate to high temperatures, geostress, hydraulic, chemical, biological and radiation process, etc ) ; ( 4 ) the geochemical behaviour of transuranic radionuclides with low concentration and its movement with groundwater : and ( 5 ) the safety assessment of disposal system

    在介紹國內外最新研究進展的基礎上，重點討論高放廢物地質處置的若干關鍵科學問題：處置庫場址地質演化的精確預測、深部地質環境特徵、多場耦合條件下（中（高）溫、地殼應力、水力作用、化學作用、生物作用和輻射作用等）深部巖體、地下水和工程材料的行為、低濃度超鈾放射性核素的地球化學行為與隨地下水遷移行為及處置系統的安全評價。
  9. Thirty - one crystals of polyoxometalates ( 1d, 2d, 3d ) were prepared by means of middle hydrothermal technique, molecular design and self - assembly, and characterized structurally by single crystal x - ray diffraction. the thermal stability, activity of catalysis and magnetism of some compounds were systematically studied. the continuous appearance of p - v - o, p - mo - o, v - mo - o, v - o system with novel structure enrich polyoxometalate chemistry, the reaction characterization and the synthesis law of molybdates, tungstates and vanadates under hydrothermal conditions were explored

    由於p - v - o 、 p - mo - o 、 v - mo - o 、 v - o體系新結構不斷出現，豐富了多金屬氧酸鹽化學，探討水熱條件下釩、鉬、鎢物種的反應特性和生成規律，研究原料的選擇、配比、加料順序、濃度、酸度、反應溫度、反應時間等因素對產物的生成及結構的影響，為新的催化劑、導電材料、磁性材料的研製與開發積累經驗。
  10. The composite has excellent performance of water retaining, that the adsorbed water of 85 % is retained after being dried 10 days at the room temperature, and the adsorbed water of 45 % is retained after being dried 24 hours at 60 the factors influencing on water absorbency for the superabsorbent composite such as the kinds and concentration of starch, clay, crosslinker, initiator, the external salt solution and hydrolysis degree are investigated in this paper

    該超吸水性復合材料在室溫下乾燥10天後的保水率為85 ，在60 2條件下加熱24小時后的保水率為45 。本文較詳盡地探討了超吸水性復合材料的合成條件，並系統地研究了影響超吸水復合材料吸水倍率的各種因素。例如：粘土的種類及粘土的用量、澱粉的種類及澱粉的用量、交聯劑的用量、引發劑的用量、水解度（氫氧化鈉的用量） 、水解時間、外部鹽溶液的種類及濃度等條件。
  11. The reason to cause this phenomenon is due to the change of electric field in the blue oled to induce the probality of the carrier shifted and the hole - electron recombination zone changed, which was a possible alternative to achieve color display. 3 ) device with the structure of ito / npb / adn : balq3 / alq3 / mg : ag was fabricated. when the balq3 dopant concentration was about 25 mol %, a high performance devcie with luminous efficiency of 1. 0 lm / w, the peak of emission spectrum at 440 nm, the cie coordinate at ( 0. 18, 0. 15 ), and half lifetime of unencapsulated device about 950 hrs was achieved

    導致本現象的原因是由於各有機層電場強度的變化影響了空穴和電子的隧穿幾率，從而導致載流子的復合區域發生改變而發出不同顏色的光; 3 ）制備了結構為ito / npb / adn : balq3 / alq3 / mg : ag的藍光oled ，空穴阻擋材料balq3的摻入顯著影響了oled的光電性能，當balq3的摻雜濃度為25mol %時， oled的發光效率為1 . 0lm / w ，發光光譜的峰值為440nm ，色純度為（ 0 . 18 ， 0 . 15 ） ，未封裝器件的半衰期達到了950小時; 4 ）在藍光材料adn中摻雜npb 、 balq3和tbp三種材料時，不僅改善了器件的發光亮度和色純度，而且提高了器件的發光效率和壽命。
  12. Metallophalocyanines ( mpcs ) are a kind of centrosymmetric planar organo - metallic molecules with an extensively delocalized two dimensional conjugated - electron system which show a relatively large third order optical nonlmearity, varying upon central metal atom substitution and other factors. other interesting properties of this molecule and many of its derivative products are their versatility, architectural flexibility and high environmental stability, which are very important requirements to implement photo - electronic applications

    因其骨架結構特徵和可通過選擇中心離子、軸向配體和在酞菁環上引入功能性取代基等方法進行分子篩選與組裝得到具有特殊的物理化學性質和光、電、催化等功能的材料，而引起化學家和材料學家的濃厚興趣。
  13. In order to study the function of cycling2 in vitro culturing cell line, we used pires - g2 eukaryotic expression vector transfecting human gastric cell line sgc - 7901 and human embryo kidney hek - 293 cells by lipofectamine plus reagent, and studied the function of cycling2 expression on the cell proliferation in vitro, further investigated the regulation mechanism of cycling2. at the same time, we made a study on the expression level change of cycling2 in normal gastric tissue and different type and different stage of gastric carcinoma tissue. material and method 1 material : piresneo vector was purchased from clonetech, plasmid extraction and purification kit was purchased from qiagen company ; rpmi 1640, dmem fetal calf serum were obtained from gibco / brl ; lipofectamine plus and g418 were purchased from life technologies ; ultrasensitive ? s - p kit, mouse monoclonal antibody p21wafl ( in use ), dab staining kit were purchased from maixin company

    實驗材料與方法1 .實驗試劑高糖dmem 、 rpmll640和胎牛血清購自美國g山eo / brl公司; dmewf12 （ 1 : 1 ）混合培養液購自美國hyclone公司;胰蛋白酶購自美國si目叮a公司; hepes由美國amersco公司分裝;脂質體轉染試劑（ upofectalnineplusreageni ）和以18為美國玩vitrogen公司產品; piresneo載體購自美國cloneteeh公司;質粒提取及純化試劑盒購自德國qiagen公司; ultresensitive翎s一p免疫組織化學試劑盒;鼠單克隆抗體戶3 （ do一7 ）蛋白（即用型） ;鼠單克隆抗體p21waf ， （即用型） ; dab染色試劑盒均購自福建邁新公司;鼠單克隆抗體pziwa曰（濃縮型） ;辣根過氧化酶標記羊抗鼠二抗購自北京中山公司; ecl試劑盒購自美國santacruze公司; dcproteinassay試劑盒購自bi 。
  14. This paper mainly aims at the strategic demands for large - aperture lightweight mirror proposed by high - tech development. its main research contents are : select material blank for lightweight mirror according to physical and chemical properties of optical glass ; analyze and calculate the deformation quantity of the mirror with finite element method ; design and optimize mirror body structure of 400 lightweight plane mirror and 450 lightweight spherical mirror, analyze glass cutting principle, design specisl - use grinding wheel structure, select reasonable technological parameters to implement the processing of weight reduction holes on 400 plane mirror ; analyze etching mechanism of hydrofluoric acid, look for the technological parameters such as the optimal acid concentration and etching time etc. ; eliminate the stress of weight reduction holes and micro - cracks on 400 lightweight plane mirror ; discuss the processing principle and

    本論文的研究主要是瞄準國家高技術對大口徑輕型鏡的戰略需求而開展的。主要研究內容是：根據光學玻璃的物理與化學性能，選擇輕型鏡坯材料；用有限元法對鏡子的變形進行分析、計算，找出變形規律，優化設計400mm輕型平面鏡、 450mm輕型球面鏡鏡體結構；分析玻璃切削原理，設計專用磨輪結構，選擇合理工藝技術參數，完成400mm平面鏡輕量化減重孔的加工；分析氫氟酸腐蝕光學玻璃機理，尋找最佳酸濃度、腐蝕作用時間等工藝參數，實現400mm平面鏡減重孔應力與微裂紋的消除；討論分離器加工原理和工藝技術特點，完成400mm平面輕型鏡面形加工。
  15. With the development of the growth skill craft of gaas single crystal, the density of el2 can be controlled in 1 - 5 1016 / cm ~ 3 and its distribution becomes more uniform in gaas wafer too, so the distribution of carbon seems to be more important to determine the uniformity of electrical resistivity of si - gaas material. so it seems to be very important to study the distribution of carbon and the effect of dislocation on the distribution of carbon

    隨著單晶生長技術的發展，通過退火，由於si - gaas中理論化學配比偏離， el2濃度可被控制在1 1 . 5 10 ~ （ 16 ） cm ~ （ - 3 ） ，且分佈均勻。因此碳的分佈就成為決定si - gaas材料電阻率均勻性的一個關鍵因素。所以，研究碳微區均勻性就顯得非常重要。
  16. According to the observed experiments that the na2feo4 solution with the same concentration and volume were decomposed by the same area of different membrane, we learned the order of the decomposing rate of na2feo4 caused by different membranes : soapnated cellulose acetate > vinylon > polypropylene polyvinyl chloride = polyethylene microfiber glass mat

    從觀察等面積的隔膜引起同濃度同體積的na _ 2feo _ 4溶液的分解實驗可知，不同隔膜材料引起na _ 2feo _ 4溶液分解速率從大到小的順序是，皂化再生纖維素膜維尼綸無紡布改性聚丙烯膜聚氯乙烯膜輻射接枝聚乙烯膜復合玻璃纖維氈。
  17. Before using the chinaware, the hezhen nationality people made lots of simple, practical, easy - to - life wooden productive instruments and living containers made of wood, which were full of local characteristics and national styles and provided abundant ethnological materials for the research of hezhen ancient culture

    摘要在陶瓷器、鐵器沒有進入赫哲地區前，赫哲族人曾以樹木為材料，製作了一件件簡單實用、貼近生活的木製生產用具和生活器皿，這些充滿濃郁地域特色和民族風格的木製品，為研究赫哲族的古代文化提供了極其豐富的民族學資料。
  18. In the investigations of the nanosized zirconia powders co - doped with yb3 + - 0. 2 ( 0. 4, 1 ) mol % tm3 + ions under 980nm ld excitation, the blue up - conversion emission at 474nm comes from the 1g4 - 3h6 transition

    詳細研究了鉺離子摻雜二氧化鋯納米材料的上轉換發光性質，得到：在低摻雜濃度（不大於1mol ）下，鉺離子主要發綠光。
  19. The main factors influencing agrobacterium - mediated genetic transformation of portulaca grandiflora hook, are as follows. the concentration of kanamycin of devision leaves and the calli were 100mg / l and 200mg / l, respectively. calli infection can gain more gus gene transient expression and resistant tissuses than devision leaves

    對松葉牡丹進行遺傳轉化研究發現，採用葉片作為外植體時， kan的濃度100mg / l就可抑制愈傷的誘導，而用愈傷組織作為材料感染時濃度要達到200mg / l才可。
  20. This study dealled with high concentrated pharmaceutical wastewater treatment. the high level sediments of organic pollutants were examined qualitatively and quantitatively, and the three dominated strains, which can degrade the sediments of albendazole, chlor - trimeton and brufen, had been screened. the three dominated strains were trailed to solidify by materials three of bounded solidification and two of embed solidification. the results of degradation experiment announced that at high loading condition a removal ratio over 90 % of organic compounds had been obtained, about 1 / 3 higher than conventional activated sludge process. assumes to treat the high level organic wastewater has been suggested

    針對制藥行業的高濃度有機廢水，定性定量地測定了高濃度有機物底物；篩選出降解以阿苯噠唑、撲爾敏和布洛芬為主要底物的3種優勢細菌；應用了3種結合固定化材料和2種包埋固定化材料對優勢菌群進行了固定化試驗；通過降解試驗，在高負荷的情況下有機污染物最高去除率可達90 %以上，比一般活性污泥法提高功效1 / 3 ；提出了利用現有設施對高濃度有機廢水的處理工藝設想。
分享友人
分享到 Line

分享到臉書