熔膜 的英文怎麼說

中文拼音 [róngmó]
熔膜 英文
melt film
  • 熔 : 動詞（熔化） melt; fuse; smelt
  • 膜 : 名詞1. [生物學] （像薄皮的組織） membrane 2. （像膜的薄皮） film; thin coating
  1. The prototype is made by a concave sphere primary and a plane secondary deposited the mo / si multilayer on the fused quartz substrates. the reflectivity peak and the reflectivity uniformity of the multilayer mirrors are respectively 25 % and around + 2. 5 % at 17. 1nm

    望遠鏡主鏡為球面，次鏡為平面，所用反射鏡為在熔石英基底上鍍制mo si多層膜的euv波段反射鏡，在17 . 1nm的反射率25 ，反射率的均勻性2 . 5 。
  2. The replicas are made by using a thin film of fusible alloy on a stiffening platen.

    復制是用附著在加強托板上的可熔合金薄膜實現的。
  3. Two kinds of n - substituted pyrrole ( trimethyl - ( 2 - pyrrol - l - yl - ethyl ) - ammonium iodide and 2 - ( 2 - pyrrol - 1 - yl - ethoxy ) - ethane - sulfonate sodium ) were synt hesized ; poly ( trimethyl - ( 2 - pyrrol - l - yl - ethyl ) - ammonium iodide ) / v2os nanocomposites were synthesized by two methods ( monomer in - situ intercalate polymerization and polymer intercalation in solvent ). to fabricate vaos sol by melt quenching, oxygen top - blend technique was applied to improve oxygenic part - pressure, decrease the oxygenic anoxic and restrain the increase of v4 + ion when vos was melted. the xos xerogel prepared by the new technique had more complete structure than the vos xerogel which v20s powder was melted in the air

    針對以v _ 2o _ 5為原料、熔融淬冷法合成v _ 2o _ 5溶膠、制備v _ 2o _ 5干凝膠薄膜這一方法，提出了在v _ 2o _ 5熔融時運用氧氣頂吹工藝這一思路，目的是增加熔體表面的氧分壓，減少熔體的氧缺損，使v _ 2o _ 5干凝膠的v ~ （ 5 + ）離子含量更高、其結構更完整、性能更穩定。
  4. Affiliated to our company, there are 2 branch companies craft factory and 1 computer server co - location center. rare refractory metal manufacturing company : company unit production equipments including the four high mills introduced from russia, home - made duo mill and narrowband mill, 400kg pneumatic hammer, punch, grinder and lathe, etc. ; a foot set of complete flow has been formed from the processing of product cog to finished product

    公司下設4個分公司：星元稀有難溶金屬加工有限責任公司，是以生產鎢鉬鉭鋯鈮鈦鎳等難熔金屬材料及其製品為主的規模企業晨光印務有限責任公司，是集鋁箔袋高溫蒸煮袋抽真空袋及各類食品包裝袋的設計製作印刷覆膜等專業化生產企業。
  5. The sensor adopted micro melts technology and introduce aviation application science and technology ; using high temperature glass the micro processing silicon voltage dependent resistance strain gauge to melt on the stainless steel diaphragm

    傳感器採用的微熔技術，引進航空應用科技，利用高溫玻璃將微加工硅壓敏電阻應變片熔化在不銹鋼膜片上。
  6. Meanwhile, through adopting imported environmental materials, all of our product pu, pure pu, tri - layer ventilative cloth, heat transformation materials, etc. are totally accord with eu environmental criteria

    盟環保標準的高品質系列防水熱風膠條pu純pu三層透氣膠帶熱熔膠膜熱轉移材料等。
  7. The molecular dynamics simulation method has been used to study the relation between the melting temperature and the cohesive energy of pb nanofilms

    摘要本文利用分子動力學方法研究了鉛納米薄膜的熔化溫度與結合能的關系。
  8. It is found that the relation between the melting temperature and the cohesive energy of bulk materials can be used to nanomaterials, but the coefficient depends on the height of nanofilms

    研究表明，塊體材料熔化溫度與結合能的關系式在納米薄膜體系仍然成立，但比例系數是一個依賴于薄膜厚度的參量。
  9. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  10. An strippable antirust packing plastic which was hot - melt type and solvent type was made of eva resin as the main film components, corrosion inhibitor and modifying agents, and the application of the material in the antirust of cutting tool and machine tool were discussed

    摘要介紹了以熱塑性樹脂為主要成膜物質，加入防銹劑和改性劑製成熱熔型和溶劑型可剝離防銹包裝材料，並敘述了其在刀具和機床防銹方面的應用情況。
  11. Either the boron nitride ( bn ) thin films with different cubic phase content were deposited on n - type si ( 111 ) and fused silica substrates by radio frequency ( rf ) sputtering using two - stage deposition process. the films were characterized by fourier transform infrared ( ftir ) spectroscopy. the transmittance te ( ) and reflectance re ( ) were obtained as a function of incident photo wavelengths and the thickness of films was measured by alpha - step. the absorption coefficient was calculated from te ( ) and re ( ). the optical band gap ( eg ) of the films was determined by effective medium form of formula containing eg

    本文還研究了立方相含量與光學帶隙的關系，在n型si （ 111 ）片和熔融石英片上沉積出不同體積分數的立方氮化硼薄膜，薄膜的成分由傅立葉紅外吸收譜標識；用紫外-可見分光光度計測量了沉積在石英片上的bn薄膜的透射光譜te （ ）和反射光譜re （ ） ，薄膜的厚度用臺階儀測得。
  12. Base on two - stage approach, we adjust experimental parameter to develop a new method ( three - stage approach ) to prepare c - bn thin films. the study proves that it is favorable to prepare bn thin films of high cubic phase content. depositing time and substrate bias voltage in the first stage are 5 min and - 180v respectively

    根據si片上bn薄膜的反射光譜r （ ）和熔融石英片上bn薄膜的反射光譜r （ ）和透射光譜t （ ）各自獨立的計算了bn薄膜的光學帶隙，利用兩種方法分別計算立方相含量均約為55 %的bn薄膜的禁帶寬度為5 . 38ev和5 . 4ev ，其結果均和由經驗公式計算得到的結果非常接近。
  13. The combination of refractory and noble metals in a single layer makes etching a formidable task.

    難熔金屬和貴金屬組合的這一層薄膜使刻蝕成為一個艱巨任務。
  14. The ba0. 7sr0. 3tio3 / pt / ti / sio2 / si multilayered heterostructures were also successfully prepared. the xrd analysis shows that bst thin films are perfect perovskite structure. the edax analysis reveals that ti content is rather higher in our bst thin films according to

    Edax成分分析表明bst薄膜樣品中欽的含量明顯偏高，這可能是由於五是高熔點金屬，較ba 、 sr金屬的熔點都高出許多之故。
  15. Films for wrapping rubber bales - non - strippable high melting point films

    包裝橡膠包用薄膜.不可剝拆的高熔點薄膜
  16. Servo control computer system / microcomputer universal testing machines, ozone tester, compression flexometer, computer hdt / vicat tester, digital impact tester, melt flow indexer, moving die rheometer, mooney viscometer, lamination of pvc plastic press tester

    伺服控制電腦系統微電腦式拉力試驗機，耐臭氧機，橡膠壓縮生熱試驗機，塑料用維卡熱變形，數位沖擊試驗機，塑膠熔體流動速率機，無轉子密閉膜腔硫化儀，門尼黏度試驗機等等。
  17. Urea granules are coated with liquid sulfur under suspension and recycle conditions. the coating is well proportioned to achieve the even controlled release of the nutrients

    全封閉狀態下，尿素顆粒在循環和懸浮的條件下完成熔硫的塗膜過程，保證每個尿素顆粒塗膜均勻，實現對氮元素的養分控制釋放。
  18. The effect of h3bo3 was discussed in detail, and the luminescence and aferglow time was increased. the stability of this material was studied and it needs coating processing in application. then by changing the base, activator, flux and reaction condition, we studied different phosphors based on the aluminates, silicates, catio3 and y2o2s in detail, and obtained the best stoichiometry and preparation of these phosphors with the colors of red, red and orange, yellow - green, blue - green, cyan and blue - purple

    本論文採用高溫固相法，對黃綠色sral _ 2o _ 4 ； eu ， dy長余輝材料的發光特性進行了深入的研究，詳細討論了助熔劑硼酸對材料的影響，大幅度提高了該材料的余輝亮度和時間，並對該材料的穩定性進行了研究，得出使用時要進行包膜或其他防潮處理的結論。
  19. The meltable liquid touches with the rotary drum of cooling that form material film in rotary drum appearance. the heat exchange between material film and drum wall makes material film cooling and crystallization. the crystal material film is cut by scraper which forms piece product

    轉鼓結片是一個冷卻結晶過程，料盤中熔融料液與冷卻的轉鼓接觸，在轉鼓表面形成料膜，通過料膜與鼓壁間的換熱，使料膜冷卻結晶，結晶的料膜被刮刀刮下，成為片狀產品。
  20. The crystal grain boundary of v2o5 films was melted and disappeared as increasing the deposition temperature, and the crystalline v2o5 films can be obtained by deposition at > 300. these films showed excellent cathode and anodic electrochromic performance at different wavelength region

    而襯底溫度升高促進薄膜晶體顆粒長大、熔結，晶粒邊界消失，在較高襯底溫度（ 300 400 ） ，得到連續的結晶性能良好的v _ 2o _ 5薄膜。
分享友人
分享到 Line

分享到臉書