熱加工性能 的英文怎麼說

中文拼音 [rèjiāgōngxìngnéng]
熱加工性能 英文
hot working characteristic
  • 工 : Ⅰ名詞1 （工人和工人階級） worker; workman; the working class 2 （工作; 生產勞動） work; labour 3 ...
  • 性 : Ⅰ名詞1 （性格） nature; character; disposition 2 （性能; 性質） property; quality 3 （性別） sex ...
  • 能 : 能名詞（姓氏） a surname
  1. In addition, that building experiment setting is used for experiment and analyzed performance of the heat pipe radiator that using five different working substance

    並為該熱管散熱器建立了試驗臺，通過使用五種不同的工質對該種熱管散熱器的性能加以試驗及分析。
  2. The thesis begins with computational analysis to the aerated concrete wall thermal performance. the aerated concrete is proved to have good performance in heat - insulate and heat - conserve as single wall. the index of dew - condensing is within allowing range, thermal performance totally can meet energy - conserving standard requirement in hot summer and cold winter zone

    本文首先對加氣混凝土墻體熱工性能進行計算分析，論證其作為單一墻體，夏季隔熱、冬季保溫性能都很優良，墻體結露指標也在允許范圍之內，熱工性能完全可滿足夏熱冬冷地區節能標準要求。
  3. At the same time monolithic cesiumic potassium flameproof glass features very good workability, can be processed to be sandwich safety glass, hollow glass, coated glass, dot - type curtain wall glass, hot - type curtain wall glass, hot - bent flameproof glass, and can serve as fire partition and escape passage in house

    單片防火玻璃具有很好的加工性，能加工成為夾層安全玻璃、中空玻璃、鍍膜玻璃、點式幕墻玻璃，熱彎防火玻璃，還可以作為室內的防火隔斷和逃生通道。
  4. The thermoelectric power outputs of laminated structures with various thermoelectric materials have been mathematically optimized and experimentally measured. some conclusions have been drawn in the present work as follows : 1. the performance, microstructures and the failure mechanism of laminated bi2te3 / fesi2 prepared by dip coating using tin - based alloys as bridge materials have been investigated

    本項研究獲得了以下主要成果： 1 、以sn基合金為焊接材料，採用熱浸焊技術制備了bi _ 2te _ 3 / fesi _ 2疊層熱電材料，並系統地分析研究了疊層熱電材料的性能，焊接過渡層的微觀組織結構以及過渡層在熱加工及模擬服役過程中的破壞機制。
  5. The purpose of the paper is to search the feasibility of the ecletron - beam weld of ti3al intermetallics and tc11 ( a + b ) two phase titanium alloy, and the influence to weld microstructure and properties of the hot deform and heat treatments

    本文的目的是探索ti _ 3al金屬化合物tac - 1b合金與tc11兩相鈦合金電子束焊、熱模鍛及熱處理的可行性，並研究焊后熱加工變形與熱處理對組織與性能的影響。
  6. By vacuum - electron - beam weld of ti3al and tc11 the technology of hot die forging, and then use different heat treatments, study the influence law of the different degree of deform, different heat treatments to the microstructure and properties

    採用熱模鍛技術，通過對tac - 1b 、 tc11進行不同程度的變形、真空電子束焊接，然後採用不同的熱處理工藝，研究熱加工工藝對合金組織，性能的影響規律。
  7. This kind of steel is a casting material of p91, with the better performances of high temperature anti - oxidation, high - temperature creep rupture strength, t hermal conductivity and the lower performances of t hermal expansion. there is no casting in chinese

    該鋼種為p91對應的鑄材牌號，材料具有良好的高溫抗氧化性能，較高的高溫蠕變強度、持久強度和韌性，低的熱膨脹性，良好的導熱性、加工性等特點。
  8. Series refractory materials for casting is our impor - tant unshaped refractory materials. its physical chemical index and the properties are all up to the advanced standards in our coutry, it can take the plae of imported refractory goods, faeaturing for its fine property in construction, and slag, anti - peeling off and good characteer of anti heat vibration, suitable for various kinds of heating furnaces and soaking pit

    系列耐火澆注料是我公司重點不定型耐材品種，其各項理化指標及產品性能達到了國內先進水平，可取代進口材料，該系列產品施工性能優良，抗渣侵蝕，抗剝落及抗熱震性能好，于各種加熱爐，均熱爐等。
  9. The data of mechanical properties test proved that the composite materials compounded with 0. 39 ~ 0. 46um ps organic rigid particles at 0. 2 % ( wt ) and pp have excellent strength and toughness. sem photograph found that the organic rigid particles were separated into 60 ~ 80nm size in the composite by melting process, which has belter toughness compare with the pp compounded with ultra - fine organic rigid particles

    用2粒徑為0 . 39 0 . 46um的xps復合pp ，經力學性能測試，有最好的增韌效果； sem掃描電鏡發現，經熱加工的復合材料中最小的有機剛性粒子粒徑可部分分散到60 80nm ，該復合材料比超細有機剛性粒子復合的pp有更好的沖擊韌性。
  10. 5. after high temperature annealing the hardness of the composites did not reduced obviously until 973k, this temperature greatly exceeds that of pure copper ( after cold machining, the temperature is 423k )

    本文制備的材料經高溫退火后的硬度明顯降低溫度點為973k ，大大超過了純銅（冷加工態）的423k ，而且熱穩定性能較好。
  11. The product has excellent tooling quality and machining performance, so as to alleviate and avoid the deformation of ejector pin because of heat treatment

    該產品具有良好易切削性能和機械加工性能，從而避免了薄壁推管（司筒）因熱處理而產生變形。
  12. Technique of " a steel by line heating and cooling " have several characteristics such as full of techniques and difficulties etc, it is based on experience of experienced workers and use the fire heat steel plates in predetermined lines calculated by expert system, then cool them down by water, so the difference between forces of extention and contraction, the steel plates will curve to their desired shape

    水火彎板是造船生產中技術性強、難度大，具有很強特色的一種經驗性鋼板曲面成形的熱冷加工工藝方法。這個項目就是和大連造船新廠合作的「大型復雜曲面鋼板水火加工智能機器人」 。
  13. Good corrosion resistant, heat - resistant, high - temperature resistant and antioxidizing in high - temperature, very good mal lea bil i ty and weldability

    具有良好的耐蝕性、耐熱性，高溫強度及高溫抗氧性能良好，加工性、焊接性能良好。
  14. This original presents the universal insulation materials and the general testing and evaluating method for pipelines " insulation of the thermodynamics power generating plant ; performs the insulation testing and evaluating of the high temperature steam pipelines of longfeng heat and power plant ; takes composite structural research on the high temperature steam pipelines, and establishes the relevant optimizing physical and mathematical model of the insulation layer, confirms the constraint and boundary condition, carries on optimizing design for the thickness of insulating layer ; in order to more systematically analyzing the present situation of insulation of the installation and pipelines of longfeng heat and power plant, develops a suit of software namely " the information associated decisive system for the insulation project ", taking advantage of this software can achieve. the design, evaluation and direction to building for the insulation project, examine the criterion of design and building, the perform ance and manufacture data of different insulation material, which is convenient to the selection of insulation material

    在進行保溫結構優化的過程中，主要是針對高溫蒸汽管道進行復合結構研究，並建立相應的物理及數學模型，找出其約束條件和邊界條件。同時為了更加系統地對龍鳳熱電廠設備及管道的保溫現狀進行分析，開發了一套「絕熱工程信息決策系統」軟體，利用該軟體可以實現絕熱工程的設計、評估及施工指導，並可以查閱設計及施工標準、各種絕熱材料性能和生產廠家的資料，便於絕熱材料的選擇。該套軟體的設計填補了國內空白，避免了絕熱工程改造、設計及施工過程中的無序現象，規范了絕熟工程市場，從而為我國絕熱工程的選材、設計、施工及管理提供科學依據。
  15. The microstructure and performance of titanium is relatively sensitive to the process parameters in the hot deformation processes, and the optimal process parameters is in relatively narrow range, and then it is in difficulty to obtain ideal microstructure and performance with the common forging technique

    由於鈦合金的組織和性能對變形時的熱加工參數比較敏感，使其適合的熱加工參數范圍較狹隘，用一般的鍛造方法難以獲得理想的微觀組織和性能。
  16. Compared with the internal combustion engine vehicle ( icev ), fcev is not restricted by thermal mechanism and carnot cycle and has a higher energy conversion efficiency and a better working condition. at the same time, the fcev can also keep the same dynamic performance, top speed, long driving distance, driving security and comfort. it is considered as the first choice as a kind of clean and high efficient vehicle

    與傳統內燃機汽車相比， fcev不通過熱機過程，不受卡諾循環的限制，具有能量轉化效率高、環境友好等內燃機汽車不可比擬的優點，同時仍然可以保持傳統內燃機汽車的加速性能、高速度、長距離行駛和安全、舒適等性能，被認為是21世紀首選的潔凈、高效運輸工具。
  17. A multi - model identification algorithm based on weighted cost function and application in thermal process

    一種基於加權性能指標的多模型辨識演算法及其在熱工過程中的應用
  18. After studying the precision of fdm process, a rapid edm electrode fabrication technology based on fdm is developed, the technology, which combined pulse - reverse electroforming with strengthening of copper wire - arc spraying, can obtained compact crystal electrode ' s working part, and strengthened filling part which has big adhesion strength, better electricity and heat conductivity, the edm performance of the obtained electrode reaches that of electrolysis copper electrode

    繼fdm工藝精度研究后，開展了快速模具製造技術的研究，建立了基於fdm原型快速製造電加工電極的工藝。該工藝將脈沖電鑄和電弧噴塗紫銅背襯相結合，獲得了結晶緻密的電極工作層和結合強度高、導電與導熱性良好的電極背襯層，得到的電極達到了常規機加工紫銅電極的電加工性能。
  19. The vacuum infusion molding process ( vimp ) is becoming increasingly popular as a new type of liquid composites molding process for the production of large composite parts with complex geometry, whose outstanding process properties make it the most competitive manufacturing technology with high quality and low cost

    真空注射成型工藝（簡稱vimp ）是一種制備大型、加筋異型、幾何形狀復雜構件的復合材料液體模塑成型新技術。 vimp優越的工藝性能使其成為當今國際上炙手可熱的高性能低成本復合材料製造技術。
  20. Plastics - acquisition and presentation of comparable multipoint data - thermal and processing properties

    塑料.可比多點數據的採集和表示.第2部分:熱性能和加工性能
分享友人
分享到 Line

分享到臉書