熱金屬結構 的英文怎麼說

中文拼音 [rèjīnzhǔjiēgòu]
熱金屬結構 英文
hot metal composition
  • 金 : Ⅰ名詞1 （金屬） metals 2 （錢） money 3 （古時金屬制的打擊樂器） ancient metal percussion instrum...
  • 屬 : 屬名詞1 （類別） category 2 [生物學] （生物分類系統上所用的等級之一） genus 3 （家屬; 親屬） fami...
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 構 : Ⅰ動詞1 （構造; 組合） construct; form; compose 2 （結成） fabricate; make up 3 （建造; 架屋） bui...
  • 金屬 : metal
  • 結構 : 1 （各組成部分的搭配形式） structure; composition; construction; formation; constitution; fabric;...
  1. Abstract : the formation technologies, the structure and properties of tcs microporous man - made yarn - kind new polyester fibre which was spinned in tcs with some micrometallic - oxide have been studied. the results indicate that the rheological behaviour and spinnability of commixed polyester melt, and the structure and properties of the fibre, are relative to the spinning temperature, melt pressure, microporpus size for spinning, formation conditions, thermo - vascellum temperature, thermo - vascellum position and rolling speed, besides the viscosity of polyester cuts, coacervation particles, adding amount and size of micrometallic - oxide

    研究表明， tcs微孔化共混聚酯熔體在成型加工中的流變行為和可紡性，及其纖維的結構性能除了與原料切片的特性粘度、凝聚粒子和共混聚酯中超細金屬氧化物微粒的添加量、粒徑等因素的影響有關外，還與紡絲溫度、紡絲熔體壓力、噴絲板微孔尺寸、冷卻成形條件、熱管溫度、熱管安裝位置以及卷繞速度等因素的影響密切有關。
  2. 1. the flat plate split solar collector is some kind of the metal pipe - plate style structure, high heat effect, high hot water produced, pressured, anti - insolate, water heated in the copper pipe, reliable quality, free maintenance, can stay for 15 years

    1 .平板型太陽能集熱器是金屬管板式結構，熱效率高，產熱水量大，可承壓，耐空曬，水在銅管內加熱，質量穩定可靠，免維護， 15年壽命。
  3. The main conclusions with innovative features acquired from the present work are as follows : ( 1 ) soft solution processing technique for preparing functional thin films was put forward and applied to preparing advanced inorganic functional thin films ; a series of molybdate and tungstate films with scheelite - type were prepared directly on metal substrates ( molybdenum and tungsten foils ) by using constant current electrochemical technique at room temperature ; a series of titanate thin films with perovskite - type were synthesized directly on titanium flakes by hydrothermal method in our country for the first time

    通過上述研究工作，得到了如下具有創新性研究成果： （ 1 ）首次在國內提出和運用軟溶液制備工藝技術進行無機功能薄膜材料的制備研究；首次在國內採用室溫恆電流電化學技術直接在金屬基底（鉬片和鎢四川大學博士學位論文片）制備了白鎢礦結構的鋁酸鹽、鎢酸鹽薄膜;首次在國內採用水熱合成技術在欽金屬片上直接沛叮備了鈣欽礦結構的欽酸鹽薄膜。
  4. Thirty - one crystals of polyoxometalates ( 1d, 2d, 3d ) were prepared by means of middle hydrothermal technique, molecular design and self - assembly, and characterized structurally by single crystal x - ray diffraction. the thermal stability, activity of catalysis and magnetism of some compounds were systematically studied. the continuous appearance of p - v - o, p - mo - o, v - mo - o, v - o system with novel structure enrich polyoxometalate chemistry, the reaction characterization and the synthesis law of molybdates, tungstates and vanadates under hydrothermal conditions were explored

    由於p - v - o 、 p - mo - o 、 v - mo - o 、 v - o體系新結構不斷出現，豐富了多金屬氧酸鹽化學，探討水熱條件下釩、鉬、鎢物種的反應特性和生成規律，研究原料的選擇、配比、加料順序、濃度、酸度、反應溫度、反應時間等因素對產物的生成及結構的影響，為新的催化劑、導電材料、磁性材料的研製與開發積累經驗。
  5. Fire extinguishing pylon is designed with the help of lots of design institute in order to meet the fireproof requirement. it s made of fire extinguishing panel and common steel pylon or fire extinguishing dent, heat isolation layer and general steel pylon. its quality in fire extinguishments, electricity, and metal framework has over - passed the relevant standards of usa and japan etc

    防火橋架是我公司為滿足消防要求，在眾多設計單位支持下，研製成功的耐火鋼制橋架，具體結構有阻燃板加普通鋼制橋架和防火槽盒加隔熱層加普通鋼制橋架兩種，其耐火性能電氣性能金屬結構性能已超過美國日本等國的有關標準。
  6. Abstract : this paper studies the structure, function and realization of ceramic / metal gradient thermal barrier coatings dynamic design software by combining the conceptions of thermal barrier coatings ( tbcs ) and functional gradient materials ( fgms ). through a typical example, it compares and analyses the simulation results of temperature field in the multiplayer gradient cylinder model calculated by analytical method, finite difference method and finite element method

    文摘:結合熱障塗層和功能梯度材料的概念，研究陶瓷/金屬梯度熱障塗層動態設計軟體的結構與功能及其實現過程.通過具體的例子，對多層圓筒模型的溫度場的解析解、差分解及有限元解的模擬結果進行了比較及分析
  7. With the focus on the structure and components character of plate metal / ceramics graded coating, this paper extends and improves the thermal elastoplastic analysis model of trilayered materials derived by suresh et al and builds the theoretical model of thermal elastoplastic stresses analysis of plate metal / ceramics graded coating, and this paper also analyzes the thermal elastoplastic stresses and deformation of metal / ceramics graded coating

    本文針對平板狀金屬陶瓷梯度塗層的結構和組成特徵，推廣和完善了suresh等人的三疊層材料的熱彈塑性分析模型，建立了平板狀金屬陶瓷梯度塗層熱彈塑性應力分析的理論模型，對金屬陶瓷梯度塗層的熱彈塑性應力和熱彈塑性變形進行了分析。
  8. Before 900 c, ti reacts with al to form tial intermetallics ; above 900 c, c reacts with remain ti to form tic triggered by the exothermal reaction of ti and al ; tial reacts with tic to produce dense tial / ti2alc composites

    間的放熱反應引發c和未反應完全的ti反應生成tic ; tiai金屬間化合物和tic反應併合成緻密tiai / tizaic復合材料。通過保溫階段， tizaic長成層狀多品結構，同時復合材料緻密化。
  9. The conclusions obtained as follows : firstly, the structure ' s free frequency is decreased by the reduction of the mechanical property of the material with the increasing temperature ; secondly the thermal stress produced by the temperature gradient may decrease or enlarge the structures natural frequency ; thirdly, the variety of natural frequency of the alloy structures effected by the heat effect apparently higher than that of the composite material structures

    最後，採用ansys程序分析了合金材料、復合材料的板、彈體結構的熱振動特性。在不同的熱載條件下，取得以下結論：升溫導致的材料機械性能下降都會降低結構固有頻率，而溫度梯度產生的熱應力可能降低也可能提高結構的固有頻率；金屬材料結構的固有頻率受溫度的影響要比復合材料結構的固有頻率受溫度的影響要明顯。
  10. Tial - matrix intermetallic compounds have become one of the hottest high - temperature structural materials recently, due to its excellent high - temperature properties and lower density

    Tial基金屬間化合物因具有優良的高溫性能和較低的密度，從而成為目前世界上研究最為熱門的高溫結構材料之一。
  11. In 2000 passed theiso9001 quality system authentication, the main camp product includes : the filter, filters the separator, the oil - water separator, thesilencer, cuts shui qi, the respiration valve, the fire resistance, the hydraulic pressure safety valve, kong leijian, the metal vlexiblehose, the ripple compensator, fluctuates under the oil installment, the pot the sampling, the crane tube, lightly falls the springboard, the steel structure trestle, the liquid level indicator, the oilinterceptor, the heater, regards product and so on boundary

    2000年通過了iso9001質量體系認證，主營產品有：過濾器、過濾分離器、油水分離器、消聲器、切水器、呼吸閥、阻火器、液壓安全閥、孔類件、金屬軟管、波紋補償器、浮動出油裝置、罐下采樣器、鶴管、輕落跳板、鋼結構棧橋、液面指示器、阻油器、加熱器、視境等產品。
  12. In this paper, nanosized al2o3 ceramic particles were chose as reinforcing phase. enhanced with ultrasonic wave the particles were covered with copper using method by electroless plating, the copper - matrix composite was developed by hot - press sintering process of the composite powder. the composition, microstructure, hardness, density and dry sliding wear property of the new material have been studied

    研究路線為：選用納米級al _ 2o _ 3陶瓷顆粒作為增強相，在超聲波的環境中用化學鍍的方法完成對納米al _ 2o _ 3陶瓷顆粒表面的金屬銅包覆，採用熱壓燒結成型技術以復合粉末為原料制備成納米al _ 2o _ 3陶瓷顆粒增強銅基復合材料，研究分析復合材料的成分、組織結構、硬度以及緻密度，對試樣進行了干滑動摩擦磨損實驗。
  13. Owing to having the advantages of large size, good thermal conductivity, high precision of manufacturing and assembling, the all - metal slow - wave structures are widely used in the wide - band, high power traveling wave tube ( twt ) and relativistic twt. furthermore, the disc - loaded cylindrical waveguide is one of the most important slow - wave structures in the all - metal slow - wave structures ( sws )

    全金屬慢波結構因其尺寸大、熱耗散能力強、整體性能好等優點被廣泛應用於寬帶、大功率行波管和相對論行波管中，而膜片加載慢波系統正是全金屬結構中最重要、應用最廣泛的一大類結構。
  14. The aim of the thesis was that the pure cdte thin films were adulterated by the influx technique with different metals, and then we have investigated its configuration and photoelectricity after the anneal treatment

    目前，用離子注入的方法在cdte薄膜中摻雜的文獻報道的很少。本工作目的就是採用離子束注入的方法對純cdte薄膜進行不同金屬元素的摻雜及熱處理，研究其結構和光電特性。
  15. It is because that the forging and heat treatment can greatly change the mechanical properties of steel, reduce the shrinkage cavity and dispersed shrinkage in metal structure, and keep the organizational structure tighter

    通過鍛造和熱處理，可大大改變鋼材的力學性能，減少金屬結構內的縮孔縮松現象，使其組織結構更緊密。
  16. This program can predict the wall temperature 、 internal wall heat tranfer coefficient 、 fluid temperature and entropy profile along the water wall. all of these provide an important foundation for designing this type of water wall structure to ensure the safety of the boiler operation. this hydrodynamic calculation program and the results can be used to analyze operation reliability and structure design of water wall system

    利用所開發的程序對設計的超臨界cfb進行了計算，給出不同負荷下，水冷壁出口工質溫度分佈，水冷壁受熱面不同位置處的金屬壁溫、內壁放熱系數、流體溫度焓值分佈，以及不同管子的流動壓降等結果，為分析鍋爐工作可靠性及水冷壁系統的結構設計提供了重要依據。
  17. We also produce reefer containers, non - standard dry containers, medical hyperbolic oxygen chambers, fin type heat exchangers, pressure vessels, castings and metal construction, etc

    同時，還生產冷藏集裝箱、非標干貨集裝箱、醫用高壓氧艙、板翅式換熱器、壓力容器、鑄鐵件、工業廠房、金屬結構件等產品。
  18. M - type pneumatic riveting hammer is mainly used for hot working of metal construction in bridge truss, mine car, and it is also used for other working place in which impact energy is to be required

    型系列風動鉚釘機主要用於金屬結構的熱鉚接工作，如橋梁、衍架、礦車等鉚接工作，也可用於其它需要沖擊能量的工作場合。
  19. The lights are blazing from the world ' s largest floating christmas tree - - a gigantic metal structure as tall as a 27 - storey tower block set on a lagoon in rio de janeiro

    世界上最大的「水上聖誕樹」上燈火閃耀? ?這棵金屬結構的巨大聖誕樹有27層樓那麼高，聳立在巴西里約熱內盧市環礁湖的湖面上。
  20. In the dissertation, the coaxial disk - loaded cylindrical waveguide used in sws of relativistic traveling wave tube ( rtwt ) is discussed. the types of the coaxial disk - loaded cylindrical waveguide and the coaxial ridge - disk - loaded cylindrical waveguide are all - metal slow - wave structures and have advantages of large size, good thermal conductivity ? high precision of manufacturing and assembling

    本文分析了同軸膜片加載圓波導和脊加載同軸膜片圓波導兩種慢波系統，它們均採用全金屬結構，具備尺寸大、散熱性能好，易加工的特點。
分享友人
分享到 Line

分享到臉書