玻璃體變性 的英文怎麼說

中文拼音 [bōlítǐbiànxìng]
玻璃體變性 英文
vitreous degeneration
  • 體 : 體構詞成分。
  • 性 : Ⅰ名詞1 （性格） nature; character; disposition 2 （性能; 性質） property; quality 3 （性別） sex ...
  • 玻璃體 : vitreum; vitreous body
  • 玻璃 : 1. （一種質地硬而脆的透明物體） glass 2. [口語] （指某些像玻璃一樣透明的尼龍、塑料等） nylon; plastic
  1. Thus the existence of congenital rents of the anterior hyaloid membrane or vitreous degeneration causing discontinuities in the anterior hyaloid face is implicated

    這使我們相信該病眼的前玻璃體膜或許有先天性小缺口或玻璃體變性所導致的不完整性。
  2. By carrying out the experiment of five pieces of brick masonry walls with pilaster under low reversed cyclic loading, including four pieces strengthened with gfs and one piece un - strengthened, the seismic performance, such as the hysteretic behavior, rigidity degradations deformation and energy - dissipation, are studied systematically

    摘要通過1片未加固磚墻體和4片玻璃纖維布加固磚墻體抗震性能的試驗，對墻體的滯回特性、剛度退化性能、變形性能及耗能性能進行系統分析。
  3. In the dissertation, the effects of the air slide - film damping on the capacitive accelerometers having different slot structures which are completely or partly etched, and fabricated by the anodic bonding between silicon and glass and bulk silicon micromachining process are researched by changing the distance between the moving structure and substrate, the thickness of the structure, the width of the completely etched slot structure, the depth of the partly etched slot structure according to the two well known air slide - film damping models

    對于橫向運動的體微機械器件，其周圍空氣表現為滑膜阻尼。本文基於滑膜阻尼的兩個模型，通過改變振子與襯底的間距、振子的厚度、刻透的柵槽的寬度、沒有刻透的柵槽的深度等參數，研究了這些參數對硅?玻璃鍵合工藝製作的體硅微機械電容式傳感器阻尼特性的影響。
  4. The cleaning cars has seven major characteristics : 1, the vehicle design aesthetic appearance generous, simple, flexible cleaner compact cab from the sanitation workers in the rain, snow and inclement weather operations headaches ; 2, jia lu cleaning electric car gearbox is my companys patented products, latin america is characterized by heavy goods, light down - climbing and extended battery life ; 3, jia lu electric bicycle bridge cleaning car brake, the company is a patent product, is characterized by simple structure, convenient operation, maintenance easier, better braking performance ; 4, good deer electric car cleaning dustbins with low human workers the high - school, so that sanitation workers can easily handling, reversing a good sight, and reduce incidents, high safety factor ; 5, good deer electric cleaning trucks advanced electric power putter as a dump, the sanitation workers to reduce labor intensity, is characterized by fewer power failures, maintenance - free ; 6, jia lu electric vehicle using toughened glass cleaning cars, advance reversing have good vision, difficult to scratch and ensure the safety of sanitation workers ; 7, good deer by external electric car cleaning plate, a fiberglass liner internal, external characteristics : hinge not on the plate yi loose, often not dump deformation and withstand collisions, the internal use of fiberglass liner, not rust, corrosion, wear after the liner can be replaced, maintaining low cost

    該保潔車有七大特點： 1 、該車外型設計美觀大方，操作簡單靈活，明凈小巧的駕駛室免除了環衛工人在雨雪等惡劣天氣作業時的煩惱； 2 、佳鹿電動保潔車變速箱是我公司的專利產品，特點是拉重貨，輕松爬坡而且省電，延長電瓶的使用壽命； 3 、佳鹿電動保潔車后橋雙輪制動，是我公司的專利產品，特點是結構簡單，操作方便，維修容易，制動性能好； 4 、佳鹿電動保潔車超低的垃圾箱符合人體工程學的高度，使環衛工人能輕松地裝卸，倒車時具有良好的視線，減少事故的發生，安全系數高； 5 、佳鹿電動保潔車採用先進的電動推桿作為自卸動力，減輕了環衛工人的勞動強度，特點是故障少功率大，免維護； 6 、佳鹿電動保潔車整車採用鋼化玻璃，前進倒車都有良好的視線，不易劃傷，保證環衛工人的安全； 7 、佳鹿電動保潔車外部採用鋼板，內部採用玻璃鋼內膽，外部特點：鉸鏈在鋼板上不易松動，經常自卸不變形，經得起碰撞，內部採用玻璃鋼內膽，不生銹、不腐蝕，磨損后內膽可以更換，維護成本低。
  5. This paper mainly aims at the strategic demands for large - aperture lightweight mirror proposed by high - tech development. its main research contents are : select material blank for lightweight mirror according to physical and chemical properties of optical glass ; analyze and calculate the deformation quantity of the mirror with finite element method ; design and optimize mirror body structure of 400 lightweight plane mirror and 450 lightweight spherical mirror, analyze glass cutting principle, design specisl - use grinding wheel structure, select reasonable technological parameters to implement the processing of weight reduction holes on 400 plane mirror ; analyze etching mechanism of hydrofluoric acid, look for the technological parameters such as the optimal acid concentration and etching time etc. ; eliminate the stress of weight reduction holes and micro - cracks on 400 lightweight plane mirror ; discuss the processing principle and

    本論文的研究主要是瞄準國家高技術對大口徑輕型鏡的戰略需求而開展的。主要研究內容是：根據光學玻璃的物理與化學性能，選擇輕型鏡坯材料；用有限元法對鏡子的變形進行分析、計算，找出變形規律，優化設計400mm輕型平面鏡、 450mm輕型球面鏡鏡體結構；分析玻璃切削原理，設計專用磨輪結構，選擇合理工藝技術參數，完成400mm平面鏡輕量化減重孔的加工；分析氫氟酸腐蝕光學玻璃機理，尋找最佳酸濃度、腐蝕作用時間等工藝參數，實現400mm平面鏡減重孔應力與微裂紋的消除；討論分離器加工原理和工藝技術特點，完成400mm平面輕型鏡面形加工。
  6. National key laboratory of advanced composites ( lac ) in beijing institute of aeronautics materials ( biam ) has developed a new medium temperature curing epoxy resin system, of which the glass transition temperature is 119. 88, for resin transfer molding ( rtm ). in order to investigate the relation between viscosity and time - temperature, the rheological behavior of the system was studied by dsc and viscosity experiments. a rheological model based on the dual - arrhenius equation was established and used to simulate the rheological behavior of the resin, which was in good agreement with experimental data

    本文表徵了北京航空材料研究院先進復合材料國防科技重點實驗室樹脂組新開發出的rtm用中溫固化環氧樹脂體系3266 （玻璃化轉變溫度為119 . 88 ）其粘度隨時間、溫度的變化關系，在粘度實驗和dsc熱分析實驗的基礎上，對用於rtm工藝的該環氧樹脂體系的化學流變特性進行研究，並根據雙阿累尼烏斯方程建立樹脂體系的流變模型。
  7. Determined by dsc. whereafter, the surface micro - morphology of both sides of tini sma thin film deposited on glass was investigated by atomic force microscope ( afm ), and the difference of morphology between the two sides is observed. it has been shown that, in the growing surface of sputtered tini film, the trend of grain to accumulating along the normal direction like a column is clearly observed, and the grain is very loose which resulted in more microcavities, but in the surface facing to glass substrate, grain is so compact that there are hardly microcavities

    通過濺射法，在玻璃襯底上淀積了tini薄膜，並在600進行了真空退火， dsc法測得其馬氏體逆相變峰值溫度為75 ，利用原子力顯微鏡，對玻璃基tini形狀記憶合金薄膜的襯底面與生長面進行了表面微觀形貌分析，發現：生長面晶粒呈現出沿薄膜法線方向柱狀堆積的趨勢，晶粒緻密性差，微孔洞多；而襯底面晶粒緻密，幾乎沒有微孔洞存在。
  8. Concentration changes of amylase in vitreous humor of acute pancreatitis associated with different postmortem interval in rabbits

    家兔急性胰腺炎死後不同時間眼玻璃體液澱粉酶變化
  9. Peripheral retinal degeneration ( lattice degeneration ) and vitreal traction are factors involving in the production of retinal detachment

    周邊網膜變性（格子狀變性）和玻璃體牽扭力是造成網膜剝離的必要因素。
  10. The regressive equation that described the relationship between resistivity and strain are determined. to prove the applicability of the relationship, we composite the conductive composite material prepared by chopped carbon fiber mat with glass fiber reinforced composites of different strain character and study the relations of strain to resistivity under tensile stress

    為證實該關系的適用性，通過將短切碳纖維氈制備的導電復合材料與具有不同應變性能的玻璃鋼復合，對拉伸狀態下應變與體積電阻率之間的變化關系進行了研究，並用多元回歸的方法進行了數值分析，確定了電阻率與應變之間變化的數學模型。
  11. Filter combine with three way cock to remove the vehicles in triamcinolone acetonide for clinical use

    玻璃體切割聯合曲安奈德球內注射治療增殖性糖尿病視網膜病變
  12. Aqueous fluid volume and [ c1 ~ j were assayed in samples withdrawn by micropipettes. intraocular pressure ( top ), pressure - dependent outflow, and anterior chamber compliance were determined from pressure measurements in response to pulsed and continuous fluid infusions into the anterior chamber using micropipettes. result : in wildtype mice ( gdi genetic background, age 4 - 6 weeks ), iop was 16. 0 ? 0. 4 mmhg, aqueous fluid volume was 7. 2 ? 0. 3 ul, aqueous fluid production was 3. 6 ? 0. 2 ul / hr, aqueous fluid outflow was 0. 36 ? 0. 06 ul / hr / mmhg, and anterior chamber compliance was 0. 036 ? 0. 006 ul / mmhg ( mean ? se, 8 - 10 eyes )

    實驗方法包括：將熒光物質用電離子滲透的方法穿透角膜導入活體小鼠的前房中，然後應用共聚焦顯微鏡根據熒光強度變化測量房水生成率；通過顯微注射針吸取房水檢測房水容積和氯離子濃度；顯微玻璃管刺入前房測量眼內壓，並將生理鹽水分別以連續和脈沖兩種方式注入前房，測量房水間隙的順應性和房水排出與眼內壓的相關性。
  13. The multi - purpose tester developed here is aim at testing the mechanics performance of the brittle material, which bases on modular design thought, it contains several modules as the machinery load component, platform of supporting, the function modules and the software system, they can be combined in different function modules to satisfies the need of different application situation. the tester can be used to measure not only general material properties such as elastic modulus, ultimate strain, strength, hardness and toughness, fatigue properties but also various special properties such as the local strength, and surface residual stress at the different location of the brittle component with non - destructive methods. thus the security and reliability of the brittle component can be evaluated and predicted

    本文基於模塊化設計思想，研製了一臺專門針對脆性材料力學性能測試的多功能脆性材料試驗儀，其主要包括機械加載模塊、支撐平臺、功能模塊、測控系統、軟體系統等模塊，通過對這些模塊的不同組合可實現不同的功能及滿足不同應用場合要求;系統除了具有測試脆性材料的彈性模量、極限應變、強度、硬度、韌性等常規性能外，還具有無損測試玻璃構件不同位置的局部強度和表面預應力，進而對玻璃構件的安全可靠性和壽命進行預測等功能。
  14. Combined with special wettability properties, a - c films may have greater potential applications. in present thesis, a series of a - c films were prepared by magnetron sputtering technique on substrates as si ( 100 ) and glass, and the deposited processes were controlled to adjust the morphology of the surfaces of a - c films. to further obtain the desired wettability, surface chemistry compound of the lotus - like surfaces were plasma modified by optimized processes

    本文採用磁控濺射系統在普通玻璃和單晶硅上獲得了具有不同表面形貌特徵的非晶碳薄膜，此外利用等離子體表面處理系統，通過改進工藝方法，優化工藝條件，對非晶碳薄膜表面化學組成進行調控，獲得了潤濕性能從超親水到超疏水范圍變化的表面。
  15. When change the component of adhesive its shear strength increased from 39. 3 mpa to 53. 5 mpa at room temperature and it have long - term usage at 180 with 25 mpa and can be served at 230 in short period. the addition of liquid rubber resulted in a 300 % increase in the peeling strength. the addition of polymer ether imide led to a 260 % increase in the peeling strength, a 15 % increase in shear strength and a 10 increase in tg ( tg = 195. 54 )

    研究結果表明： bmi dds e ? 51 tde ? 85組成的膠粘劑體系的室溫剪切強度為39 . 3mpa ，當改變環氧樹脂的含量時，剪切強度提高到53 . 5mpa ；用無規羧基液體丁腈橡膠改性環氧樹脂膠粘劑時室溫剝離強度提高3 . 0倍；用聚醚酰亞胺改性環氧樹脂膠粘劑，室溫剪切強度最高可達45 . 2mpa ，剝離強度提高2 . 6倍，玻璃化轉變溫度tg = 195 . 54 ，比未增韌體系提高10以上；碳纖維耐磨材料與同步器圓錐環的粘接實驗結果表明，膠粘劑的使用工藝性能良好，滿足室溫剪切強度30mpa和180剪切強度12 . 5mpa的技術要求。
  16. Methods a retrospective survey was done in 68 complicatedly injured eyes undergoing routine closed vitreetomy due to vitreous opacity with massive hemorrhage, or with traumatic retinal detachment and proliferative vitreoretinopathy ( pvr ), foreign bodies in posterior segment, endophthalmitis, posterior - dislocation of lens and so on, and most of them received the combined operations simultaneously

    方法回顧分析復雜眼球外傷68隻眼，因玻璃體大量積血混濁、伴外傷性視網膜脫離及增生性玻璃體視網膜病變（ pvr ） 、眼後段異物、眼內炎、晶體后脫位等病變，行常規閉合式玻璃體切除術，同時根據不同伴隨病變聯合相應的手術治療。
  17. Fifteen eyes had bsva worse than 0. 05, nine eyes had bsva better than 0. 05, the retina could not be reattached and needed to be reoperated in two cases, 1 eye developed proliferative vitreous retinopathy ( pvr ), two cases developed cataract

    2例（ 2眼）術后視網膜脫離未能復位需再次手術， 1例（ 1眼）發生增生性玻璃體視網膜病變， 2例（ 2眼）發生白內障。
  18. An experimental study on correlation between postmortem intervals and che and got activities in vitreous humor in rabbits

    家兔玻璃體液2種酶活性變化與死亡時間的相關性
  19. Comparing the efficacy of vitreous retinal surgery in the treatment of proliferative diabetic retinopathy and other vascular retinopathy

    糖尿病性視網膜病變與其他眼底血管性疾病的玻璃體視網膜手術治療研究
  20. Regularity of variability of intraocular pressure at earlier stage after vitro - retinal surgery

    玻璃體視網膜手術后早期眼壓變化的規律性
分享友人
分享到 Line

分享到臉書