研成粉劑 的英文怎麼說

中文拼音 [yánchéngfěnjì]
研成粉劑 英文
red in pulv
  • 研 : 研同 「硯」
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  • 粉 : Ⅰ名詞1 （粉末） powder 2 （用澱粉製成的粉條或粉絲） noodles or vermicelli made from bean potato o...
  • 劑 : Ⅰ名詞1 （藥劑; 制劑） a pharmaceutical or other chemical preparation 2 （某些有化學作用的物品） a...
  • 粉劑 : coarse dust
  1. The material was sintered at 1050 for three hours to get the porous artificial bone, that its apparent porosity was54 %, its volume density was 1. 28 g / cm3, and its bending strength was 13. 25mpa. the results showed that the sintering temperature was reduced by adding bioglass

    本研究採用含生物玻璃前驅體粉末原料，添加檸檬酸造孔劑，模壓成型，在1050燒結保溫3小時，獲得了顯氣孔率為54 、體積密度為1 . 28s cm ~ 3 、抗彎強度為13 . 25mpa的多孔hap人工骨材料。
  2. On the basics of briefly summarizing the research and application presents of building coatings and nano - composite building coatings in domestic and overseas, presented a creative approach of modified exterior building latex coatings applying inorganic nano - powders and its " compound. systematically studied the effect of factors such as nano - materials " category, additive capacity, dispersing method on the behavior of exterior building coatings " weathering resistance, scratch resistance, water resistance and alkaline resistance etc. studying on uv - vis optical property of nano - powder materials and its " compounds turned up that nano - tio2, nano - sio2, nano - zno have excellent characteristics to uv shielding ; dispersing system of polybasic nano - composite materials owned higher uv shielding capability than single disperse system

    本文在簡要敘述國內外建築塗料和納米復合建築塗料的應用研究現狀的基礎上，提出了使用無機納米粉體及其復合材料改性建築外墻乳膠漆的創新思路，系統地研究了納米粉體材料的種類、添加量、分散方式等因素對外墻乳膠漆耐候性、耐洗刷性以及耐水、耐堿性等性能的影響，成功地開發了納米改性建築外墻乳膠漆產品，並完成了外墻乳膠漆用納米助劑的初步開發工作。
  3. The alloyed self - propagating high - temperature synthesis technology has been investigated in this paper, by which ceramic lined compound pipes can be produced. after active carbon powder and alloy steel powder are added to the thermit, the self - propagating high - temperature synthesis reaction starts. the effect of carbon and alloy elements on the interlayer of the compound pipes has been studied

    本文研究了合金化自蔓延陶瓷內襯復合鋼管製造技術，即在鋁熱劑中加入活性碳粉或合金鋼粉末，進行自蔓延高溫合成反應，分析了碳和合金元素對復合鋼管過渡層的影響。
  4. Lead hydrogen phosphite superfine powder, lead oxide phosphite hydrate superfine powder and tribasic lead sulfate superfine powder were prepared by micro - liquid - phase synthesis method ( mlps method ) in this paper. at room temperature, acetic acid worked as catalyst, lead oxide and phosphite or sulfate were blended thoroughly, then were ground for tens minutes

    本文採用微液相合成法制備了亞磷酸鉛、二鹽基亞磷酸鉛和三鹽基硫酸鉛超細粉末，以氧化鉛和亞磷酸或硫酸為原料，以醋酸為催化劑，在室溫下充分混合、研磨幾十分鐘，乾燥后即可得到產物。
  5. The composite has excellent performance of water retaining, that the adsorbed water of 85 % is retained after being dried 10 days at the room temperature, and the adsorbed water of 45 % is retained after being dried 24 hours at 60 the factors influencing on water absorbency for the superabsorbent composite such as the kinds and concentration of starch, clay, crosslinker, initiator, the external salt solution and hydrolysis degree are investigated in this paper

    該超吸水性復合材料在室溫下乾燥10天後的保水率為85 ，在60 2條件下加熱24小時后的保水率為45 。本文較詳盡地探討了超吸水性復合材料的合成條件，並系統地研究了影響超吸水復合材料吸水倍率的各種因素。例如：粘土的種類及粘土的用量、澱粉的種類及澱粉的用量、交聯劑的用量、引發劑的用量、水解度（氫氧化鈉的用量） 、水解時間、外部鹽溶液的種類及濃度等條件。
  6. In this paper, a high performance sma system applied to steel bridge deck is put forth in allusion to the pavement project of the wuhan junshan yangtze river highway bridge. it comprises steel slab, zn coating layer, closing layer, adhesive, pre - mixed asphalt stone and dual layer sma from bottom to top. it is based on the fea results of the forces and deformation of the pavement layer by means of the algor feas, according to this bridge ' s traffic and the ambient temperature varying range of the pavement layer

    本文針對武漢軍山長江公路大橋鋼箱梁橋面鋪裝工程，從鋪裝層環境溫度變化范圍、交通量等使用條件出發，在用algorfeas有限元分析軟體分析鋪裝層受力變形基礎上，提出了（即鋼板+金屬鋅塗層+封閉層+粘接劑+預拌瀝青碎石+雙層sma ）的高性能鋼橋面sma鋪裝體系，並對這種sma的組成材料，包括改性瀝青、集料、礦粉、纖維進行了比較研究，設計了這種sma的配合比，對sma混合料的性能進行了對比試驗，對這種sma方案進行了疲勞性能研究，驗證了所選擇sma方案的可行性。
  7. The raw materials, the composition, the time of milling, the calcining temperature, the different additives, the sintering temperature and the sintering parameters were investigated. the result showed : it was advantaged to obtain high initial permeability mnzn ferrite with stable frequency characteristic using high - purity raw materials ; in order to obtain mnzn ferrite with high properties, we must control strictly the composition ; it could improve the properties of mnzn ferrite by optimizing calcining temperature. the lower calcining temperature made the permeability higher, and the higher calcining temperature could promote the frequency characteristic of permeability ; we chosen the right time of milling according to the requirement of power diameter ; in order to improve the properties of mnzn ferrite, it is necessary to add effective additives. in this dissertation, the influence of bi2o3 、 moo3 、 k2co3 、 co2o3 were investigated ; the sintering temperature, the time of heat - retaining and sintering parameters were the key factors of preparing high permeability mnzn ferrites

    研究結果表明:採用高純度的fe2o3有利於獲得高起始磁導率且頻率特性優良的鐵氧體;為了制備所需性能的鐵氧體，需要嚴格控制配方中各種原材料的含量，優化配方;由於粉體活性受預燒條件的影響，所以對不同要求的鐵氧體選擇的預燒條件就不一樣，適當降低預燒溫度有利於獲得較高的起始磁導率，而為了獲得良好的頻率特性可以適當地提高預燒溫度;根據對粉體顆粒粒徑的不同需求，可以選擇不同的球磨時間;而有效的添加劑是改善材料性能的必要條件，本文在添加劑的研究中主要對bi2o3 、 moo3 、 k2co3 、 co2o3的影響分別作了詳細地討論;燒結溫度、保溫時間和燒結氣氛是高磁導率mnzn鐵氧體制備最關鍵的工藝，適宜的燒結工藝可以獲得理想微結構和組成，從而得到高性能的鐵氧體材料;而從材料的微結構上來看，要提高材料的截止頻率，就要適當地細化晶粒、增加晶粒內部的氣孔。
  8. On the basis of the characteristic of the industry waste slag, which is high added to the hsfab, different kinds of catalyzing methods are adopted to make the waste residue more active. the additive f, developed by the author can obviously improve the mechanics characteristic and durability of hsfab, especially the restraining of the drying shrinkage. based on the study of technics parameters and the problems in the manufacture, hf - 1100 series full - automatic hydraulic pressure wall brick presses is chosed to solve the problems, such as low molding pressure, low efficiency and the certified product ration

    在hsfab的研究方面，通過兩種體系hsfab （即「水泥?鋼渣?粉煤灰?爐渣」和「石灰?鋼渣?粉煤灰?爐渣」體系）的配方優化設計，使之具有良好的社會、經濟和環境效益；在高摻量工業廢渣的前提下，根據各種原料的特性，對其採用不同的活化技術，使其具有較高的活性；自研的外加劑f ，對hsfab製品的物理力學性能和耐久性能均有明顯的改善作用，尤其是對製品的乾燥收縮性能有顯著的抑制作用；通過對工藝參數的研究，結合實際生產普遍存在的問題，選取了hf - 1100系列全自動液壓墻體磚壓機，有效地解決了傳統制磚過程中常見的成型壓力低、生產效率低、產品合格率低（即「三低」現象）等問題。
  9. Being lightweight aggregate, the chemical mineral constituents and physical mechanics properties of lytag are analyzed. meanwhile properties of haydite concrete using lytag as coarse aggregate are also studied. the influences on lightweight concrete qualities by introducing wollastonite and chemical admixtures are researched which proves the important roles of wollastonite and admixtures in construction of concrete platforms

    分析了作為輕骨料的粉煤灰陶粒的化學、礦物成分和物理力學性能以及用它作為粗骨料配製出的輕質混凝土的各項特性；研究了摻入硅灰和減水劑等外加劑對混凝土的強度、耐久性和新拌混凝土可工作性的影響；說明了硅灰和化學外加劑在海洋平臺混凝土施工中不可或缺的作用。
  10. After the sample is turned out, its internal and external structures are observed and its bulk density is measured in order to determine how the sintering temperature, the time of thermal preservation, and the quantity of admixture affect the performance of lytag

    通過對試樣內、外部結構觀察和容重的測定，研究燒成溫度、保溫時間及外加劑摻量對粉煤灰陶粒性能的影響。
  11. By the investigation for preparation technique of the phosphor, the optimum activator concentration, host composition and firing time were established

    通過對熒光粉制備工藝的研究，確定了熒光粉制備中最佳的激活劑濃度、基質的組成及樣品的灼燒時間等工藝參數。
  12. It is the fist thing to make particles to mix with htpb equally by the mixer. many superfine particles with various particle diameters, varieties, content and surface coated had been employed to study the influence on viscosity and dispersion of the slurry

    為了使加入的粉體通過捏合機的捏合，在丁羥膠中得到均勻的分散，我們分別研究了粉體的粒度、品種、組成及粉體表面經包覆處理后，對推進劑漿料的粘度、分散性的影響。
  13. To make the dressing, the researchers grind crab shells to a fine powder and mix it with chemicals to convert the base material, chitin, into chitosan

    為製做敷藥繃帶的基層，專家們把蟹殼研磨成粉末狀，又加人一些化學制劑，將基層的聚乙酸氨基葡糖轉換成聚氨基葡糖。
  14. Powdery propellant, oxide, polymer and agent can be mixed to make slurry explosive, the sensitivity of slurry explosive is discussed ; slurry explosive can be made into special shape destructor, it results of the area, height and setting angle of explosive is related to the destr ucted effect ; the destroying effect of slurry explosive is also studied from the experiment in the air and on the steel plate

    在粉碎后的發射藥顆粒中加入氧化劑、膠凝物及交聯劑等能製成漿狀炸藥，研究了影響其感度的因素；根據漿狀炸藥的特點可以用來製造一些特殊形狀的爆破具並其進行了對比實驗；對漿狀炸藥在空氣中和鋼板上的破壞作用也進行了對比實驗研究。
  15. The nanoparticle titanium dioxide was prepared with tnb as raw material by the sol - gel process, the effects of the alcohol salt concentration the kind of solvent the water volume hydro1yze temperature. the dried ways of the wet gel and the calcined temperature of the dry gel on the specific surface area. particle size

    本文以鈦酸丁酯為前驅體，利用溶膠?凝膠法制備了納米級的tio _ 2粉體材料，通過正交實驗研究了醇鹽的濃度、溶劑的種類、水含量、水解溫度、乾燥條件和煅燒溫度等工藝條件對納米粒子的比表面積、粒徑大小及分佈、晶相組成等性能的影響。
  16. Study on sythesized organic high molecular binders in agglomeration of magnetite concentrate powder

    磁鐵精礦粉造塊中合成有機高分子粘結劑的研究
  17. With chinese academy of agricultural sciences, china agricultural university, south china university of candidates in the state ' s key research institutions, successfully developed plenty licensing injection, water injections, pharmaceutical powder, oral liquid, and disinfection of hundreds of products, and formulations of nine best - selling throughout the country, henan agricultural university, zheng abolishing the teaching research base is the key recommendation of henan husbandry enterprises, but also keep in henan weight

    公司與中國農業科學院、中國農業大學、華南大學等國家重點科研院校鼎立合作，成功研發了眾鑫牌粉針、水針、粉藥劑、口服液、消毒液等上百個產品， 9中劑型且暢銷全國各地，是河南農業大學、鄭州牧專的科研教學基地，既是河南省蓄牧局重點推薦企業，也是河南省重保持單位！
  18. Boron coated with different content ap on the rheological properties of the slurry containing 30 % boron have been carried out with the help of the sv2 / sv2fl measuring system in haake rotary viscometer. the experimental results reveal that the rheological properties of the slurry of boron coated with 20 % ap is best, namely, the slurry has a good levelability and a long pot life. the optimum conditions in the preparation of the boron - based propellant with 30 % boron in weight were obtained, and a technical and theoretical foundation has been established for the formulae determination

    3 、用進口haake旋轉粘度儀對不同包覆硼粉在硼含量為30以上的實驗配方藥漿中的流變特性研究，篩選出用20 ap包覆的硼粉所製成的藥漿不僅流平性好而且適用期長，同時找到了含硼量為30的高含硼量推進劑藥漿成功研製的成熟工藝過程及條件，為配方的進一步定型奠定了較扎實的技術和理論基礎。
  19. In the experiment, the first instar housefly larvae " metallothionein mrna expressing reach maximur. after induced by cd ( 2mm ) for 48 hours, then total rna was extracted with guanidinium isothiocyanate, and mrna was isolated by the polyattract mrna isolation systems surplied by promega company

    試驗中採用2mmcd ~ 2對家蠅初孵幼蟲誘導48小時，使其體內金屬硫蛋白mrna表達達到高峰，在液氮中將其研磨成粉末后採用異硫氰酸胍法提取總rna ，再用promega公司提供的小量分離mrna試劑盒純化mrna 。
  20. We have successfully developed, researched and produced concrete expansion agent, high performance water - reducing agent, pump - sending agent, quick - coagulating water - reducing agent, high performance concrete mixing material, green environmental senior inner wall putty, pcc spring concrete waterproof coating and so on. our series products have gained high fame among our clients after being put into market

    幾年來，經過我們的共同努力，我公司成功地開發研製生產了混凝土膨脹劑，高效減水劑緩凝減水劑泵送劑早強減水劑高性能混凝土摻合料綠色環保型高級內墻膩子粉和pcc彈性水泥防水塗料等20多個品種。
分享友人
分享到 Line

分享到臉書