等環量流型 的英文怎麼說
中文拼音 [děnghuánliángliúxíng]
等環量流型
英文
constant circulation flow pattern-
In this paper, the sensibility analysis of the factors affecting the temperature in well bore is relatively systematically made by using a large number of the data calculated with the borehole flow and heat transfer 3 ? d numerical model proposed by the author. the study shows that the thermophysical parameters of the drilling fluid and formation, etc. and the entrance temperature and circulating capacity, etc. of drilling fluid have a greater influence on the temperature in well bore. therefore, accurately mastering the thermophysical parameter values of penetrated formation and drilling fluid in well bore, considering the influence of the temperature and pressure on thermophysical parameters and accurately measuring such parameters as entrance temperature and discharge capacity of drilling fluid, etc. are of utmost importance for accurately simulating the temperature in well bore
利用由作者提出的井內流動和傳熱的三維數值模型計算所得的大量數據，文章對影響井內溫度的諸多因素進行了較系統的敏感性分析，研究表明：鉆井液和地層等的熱物理參數以及鉆井液的入口溫度、循環排量等對井內溫度有較大影響，因此，準確掌握所鉆地區地層和井內鉆井液的熱物理參數值，考慮溫度壓力對熱物理參數的影響，準確測量鉆井液的入口溫度、排量等參數值，對于井內溫度的準確模擬至關重要。By using a same boundary dimensions high efficient and new type copper exchanger substituted carbon steel oil condenser, and increasing flow rate of circulation water to reduce the temperature of freezing oil which feeds into compressor stage, to eliminate the malfunction during compressor operation, and improve running efficiency of the machine
採取將碳鋼材質的油冷卻器更換成等外形尺寸的高效新型銅管換熱器、增加循環水流量的方法，降低了進入二段壓縮機冷凍油溫度，排除了壓縮機運行中的故障，改善了機組的運行效率。Our company ushers in first the advanced equipments produces each model number wool ball. have own the laboratory of development. have the profession the personnel design development the independence development of our company and the patented product of the production with pack to have applied for the patent. create the local and top - grade quality with all strength, lead off to use the sxd type high pressure already set the even slicing the machine. make the product of our company with import an etc. product to match in excellence mutually. attaining the local price imports the quality. from enter to anticipate to process the production check goods the qualified arriving an each link of factory the full - time guarding a pass. usage door trust happy, if have responsible for quantity problem after all
本公司最先引進先進設備生產各型號羊毛球.配有自己的開發實驗室.有專業人員設計開發本公司自主開發及生產的專利產品和包裝已申請專利.全力打造國內一流品質，率先使用sxd型高壓定型平切機.使本公司產品與進口3m等產品相媲美.做到國內價格進口品質.自進料加工生產驗貨合格到出廠各環節專職把關.使用戶放心開心，如有質量問題負責到底。This paper analyses the sorts of production, amounts, sites destination of production, transport equipments, operation measures, load and unload equipment, cleaning and industrial treatment equipments, presents the sorts of container needed in dangerous cargo transport and the package condition demanded in dangerous cargo transport after investigate widely, plenty - of experiments and strict theoretical analysis on the basis of researches results before considering the facts of chinese railway transport. furthermore, this paper analyses and discusses the forces the dangerous cargo in the container receive during the transport and the effects to the inner package box influenced by every kind of environments. in the end, some suggestions about how to develop the dangerous cargo transport using container are proposed
本文在分析我國危險貨物的品類、產量、產地、運到地；運輸設備；作業方式；裝卸工具；車輛洗刷除污及工業垃圾處置等的基礎上，借鑒國外鐵路危險貨物運輸的先進經驗，在已有成果的基礎上，提出了集裝箱應有的類型，危險貨物進箱的包裝條件，對危險貨物集裝箱運輸中所受外力及流通過程中各種環境條件對集裝箱內包裝件的影響進行了分析探討，為緩沖包裝設計提供理論依據，最後，提出了發展危險貨物集裝箱運輸的若干建議。Thirdly, the mathematics model of forecasting low flow was established in fengcong and fenglin regions according to these factors influencing the amount of low flow in karst drainage ( the area of drainage, lithology, the type of landforms and its special assembly and forest ) the conception of low water resources carrying capacity was first put forward according to the changing law of low water resources in space and the situation of exploitation and utilization in karst drainage ( ie, under the condition of the virtuous ecological environment and the available technology, the explorable amount of water resources in certain areas is capacity and limitation which is able to coordinate the development of population, enviroment and economy during the period of low flow seasons ) and preliminarily analyzed its connotation, characteristic and established the index system of low flow in karst drainage
三是根據影響喀斯特流域枯水徑流的下墊面因素（空間尺度、巖性、地貌類型、植被） ，分別對峰叢和峰林等喀斯特地區建立枯水徑流預測模型。根據喀斯特流域枯水資源的空間變化規律以及實際開發利用狀況，首次提出了枯水資源承載力的概念，即在枯水季節期間，保持良性的生態環境和現有的技術條件下，某一區域內可開採的水資源量對支持該地區人口、經濟與環境協調發展的能力和限度。並初步分析了枯水資源承載力的內涵、特性，從水資源的供需方面確立了喀斯特流域枯水資源承載力的指標體系。The structures and dynamic changes of the artifical sand - fixing vegetation were studied based on the follow views : components of vegetation community, plant diversity, life - forms of vegetation, trends of plant growth, characteristics of the vertical and horizontal structure of vegetation, relationship between the vegetation community and environment ( including soil moisture temperature etc. ), relationship between the vegetation community and characteristics of plant physiological activities. some results were showed as follow : 1. components, diversity and life style of artificial vegetation in shapotou region the marked changes of artificial vegetation have taken place during more than 40 years, since the establishment of sand - fixing vegetation
本文以騰格里沙漠東南緣寧夏中衛縣沙坡頭地區人工固沙植被作為研究對象，採用傳統生態學的野外調查方法，從植被群落的組成、多樣性、生活型、群落生長動態、垂直結構特徵、水平結構特徵、群落結構與周圍環境（土壤含水量、溫度）相互關系及其與植物自身生理生態適應特徵關系等多個角度研究了人工植被群落的結構及其動態變化，取得了如下研究結果： 1 、植被群落組成、多樣性及生活型：沙坡頭地區人工植被經過近50年的演變，從流動沙丘到固定沙地，沙地植被的動態變化經歷了從人工植被到人工?自然植被的轉變，從人工植被建立初期的少數幾種引種植物到現有30多種植物，隨著固定沙地時間的延長，植物種類日趨豐富，並且人工植被在15 25年、 40 50年兩個階段，物種的周轉速率最大，即群落結構變化最大。Our company has many advanced dyeing and finishing equipment such as fong s high temperature package dyeing machine, fong s low noise rapid dryer, fong s flow high temperature dyeing machine, fong s airnospheric overflew dyeing machine, and bruckner high capacity finishing range etc. the company has all kinds of advanced testing instruments, and use environmental protected dyestuff, and the quality of the products was trusted by all the customers
我們公司引進香港立信常溫液流染色機、高溫高壓液流染色機、筒子染色機及德國布魯克納全電腦控制的熱拉幅定型機等后整理設備。公司配有各種先進測試儀器，使用環保染化料，質量可靠，深受客戶信賴。On the basis of the study of the theory and appraise method on land use in the small towns from home and abroad, this paper at first conducts a deep study on the development and role of the small towns, indicating that its development has sawn an uneven development phrase and becomes a carrier of the enterprises, a pool of surplus laborers, a hub of material exchanges between the rural and urban areas, a base of spiritual civilization, an important way to achieve urbanization. second, it conducts a study on the situation and features and the problems the land use, indicating that the efficiency of the land use is low, which has a direct influence on the development of agriculture and the role of the small towns. and the study of the demand of the land indicates the shortage of land is serious, and the small town must rationally use the land and increases its intensive role and the economical efficiency to meet the demand
在分析國內外已有關于小城鎮土地利用的理論與評價方法的基礎上，首先對小城鎮在我國的發展、地位和作用進行了深入的分析，判明我國小城鎮發展經歷了一個曲折向上的發展階段，已成為鄉鎮企業的載體，農村剩餘勞動力的蓄水池，城鄉物資交流的樞紐，農村精神文明的基地，是我國城市化的重要途徑；其次，對小城鎮土地資源利用現狀和特徵進行了探討，並對發展小城鎮建設導致的土地利用問題進行了剖析，表明目前我國大多數小城鎮土地效益和規模效益低下，佔用耕地過多，直接影響農業的發展，影響小城鎮的地位和作用；通過小城鎮土地供需分析研究表明，我國土地短缺十分嚴峻，小城鎮土地需求缺口較大，小城鎮必須合理利用現有土地，增強集約功能和土地經濟效益，從而緩解需求壓力；最後，論文通過運用特爾菲法，描述統計分析法、多元統計分析（主成分分析）法和系統分析法中的層次分析法（ ahp ）等一系列方法，結合定性和定量兩方面，從土地質量、土地資源數量與結構、土地經濟效益、環境效益、社會效益等五個方面進行分析，篩選、建立了土地資源利用評價指標體系，在因子評價的基礎上，建立了土地利用綜合評價模型，並給出了評價過程和方法。The research of system makes the observational information of tongbo dam realize standardization manage, tidy up and analyze the information quickly and exact, give the environmental physics number and diagnostic numer of displacement, stress and seepage, build the mathematical model of each observational information, evaluate the working modality of the dam, thereby ensure safe working of the dam
系統的研製使桐柏抽水蓄能電站的觀測資料實現規范化管理，快速、準確地整理、分析觀測數據，給出環境物理量及位移、應力和滲流等觀測效應量的特徵值，建立各觀測效應量的數學模型，分析評估大壩的工作形態，從而保證大壩的安全運行。Hydroelectric power exploitation can reduce sediment disposal, lengthen life of power plants in lower stream, control stream, better water quality, and reduce contamination etc. considering the structure of power of sichuan province and pointing out its six problems in power development, this thesis comes up with sustainale development strategy of sichuan hydroelectric power exploitation, that is, prefentially exploit large scale hydropower plant which has good water - adapting capability, comprehensively use water resource, try to reduce cost caused by drowning, stimulate rotating exploitation, well deal with settlement of people in hydroproject construction, and alleviate contamination
論述水電開發在減緩泥沙淤積、延長下游水電站壽命、調控水流、提高供水量、改善水質、提供清潔能源、減少環境污染等方面對長江上游生態屏障建設的作用。本文研究分析了四川水電開發的可持續發展戰略，首先對四川省電力結構現狀進行了分析，指出目前四川電力發展存在的六個主要問題，從優先開發具有良好調節性能的大型水電站、綜合利用好水資源，盡最大可能減少水庫淹沒損失，積極推進流域梯級滾動綜合開發，處理好水庫移民關系，減輕對環境的不利影響等六個方面論述了水電開發的可持續發展戰略。The results indicated that with the change of water and sand condition and the altitude of tongguan and the development of the industry and agriculture in recent decades, the water environment of wei river had changed largely, which were shown as follow : annual runoff and seasonal flood decreased sharply ; water stream of large discharge decreased and the range of runoff decreased greatly ; sediment load per year decreased generally, sediment concentration of water increased, and the sand silting up was serious ; water channel swung and shrank, and water regime deteriorated ; frequencies of big floods decreased obviously, and hyper concentrated flood increased obviously ; water levels of the same runoff rose universally, and the frequencies of the floods increased and aggravated ; water pollution was very serious
結果表明，近期隨著水沙條件、潼關高程等的變化及工農業的發展，渭河的水環境發生了巨大變化，表現在年水量及汛期水量銳減；大流量級水流出現次數減少，水量減少幅度大；年輸沙量總體減少，河水含沙量增大，泥沙淤積嚴重；河道向擺動型發展，河道萎縮，河勢惡化；大洪水發生的次數顯著減少，高含沙小洪水明顯增多；同流量洪水位普遍抬高，洪災發生次數增加，洪災加重；水質污染極為嚴重。Red tide is a natural phenomenon with complicated causes. under a favourable combination of various environmental factors, such as light intensity, temperature and nutrients in the seawater, and water velocity, microscopic phytoplanktons will bloom and create a red tide
（三）紅潮的出現為自然現象，成因很復雜。在不同的自然環境因素如光線強度、海水溫度、水中營養物的水平、水流速度等的配合下，海水裡的微型單細胞浮遊藻類便會大量繁殖而形成紅潮。This paper combines the application and research of cellular manufacturing resource management system in high - efficient numerical control machining technique research of commission of science technology and industry for national defense and demonstration project research of chengdu aerocraft corporation, studies and practice the management of workshop ' s resource management which according to mrp hand jit " s thoughts and the characteristic of manufacturing execution system to meet advanced management concept ; have realized the computer - assisted management of the measuring tool, cutter, fixture and material in numerical control manufacturing center of chengdu aerocraft corporation, have introduced some manage method, concept and the management thought in production planning and controlling management, stock management and cost management ; makes the information of cost manage department, technology department and resource management department can be shared and integrated with each other, have guaranteed the production of numerical control manufacturing center of chengdu aerocraft corporation can go on by order ; this paper is taking the management of cutter as a sample, have studied the major working process and the realistic demand of resource management in the environment of numerical control ; have established systematic function model and information model with the method of idefo, idef1x ; under the support of intranet, with the method of joint application and development, combines advanced management theory and reality, using mature software development tool, this paper have developed the computer - aided manufacturing resource management software under the pattern of c / s
本文結合國防科工委「高效數控加工技術研究?成飛示範工程」課題中單元化製造資源管理系統的研究與應用，從車間層開始圍繞製造資源計劃（ mrp ）和準時制生產（ justintime ，簡稱jit ）的需求並結合製造執行系統（ manufacturingexecutionsystem ）的特點對車間資源的管理作了一定的研究和探討，並付諸實踐，以適應先進的管理理念；實現了成飛數控加工中心刀具、量具、工裝、物料等製造資源的計算機輔助管理，介紹了一些計劃與調度管理、庫存管理、成本管理的管理思想、理念及方法，完成了與車間生產調度部門、工藝部門、經營管理部門的信息共享和集成，從製造資源的角度保證了成飛數控加工中心的生產能有序、受控的進行；對今後的車間層製造資源管理探索出了一條切實可行的解決途徑。本文以刀具管理為例，研究了高效數控環境下製造資源管理的現實需求及主要的工作流程；採用idefo 、 idef1x方法建立了系統的功能模型和信息模型；並在車間局域網的支持下，採用聯合應用開發（ jad ）方法（即程序開發人員與最終用戶共同開發系統） ，以先進的管理理論為指導，結合生產現場的實際情況，利用成熟的軟體開發工具開發了c s模式下的計算機輔助製造資源管理系統軟體。Sub - c mh - ni power batteries were prepared with excellent electrochemical performance based on the research of the high rate performance at different temperature. the change of temperature, impedance and weight loss was investigated in the process of recycle at high rate. it showed that the discharge time is 5. 9min at 10c and the middle voltage is 1. 05v
三、根據對電池大電流和溫度性能的研究，研製了具有較好電化學性能的動力型鎳氫電池，並分別測試了電池在大電流循環過程中的溫度、內阻、重量和正負極板等的變化情況，以此分析引起電池性能衰減的原因。The whole dissertation can be divided into 9 chapters, which are mainly engaged on the comparative theories of the common balance and the partial balance, and the methodology of the demonstration and criterion economics to do the analysis and res earch on the purpose of making relatively thorough and deep assessment on the policy - making and related improvement suggestions on such areas as the implement performance of the agriculture policies, the requirement structure of agriculture, the structure of employment, the basic elements and arrangement of agriculture production, the sustainable development of agriculture and the agriculture internationalization etc. the basic innovative points of the dissertation are as follows : ( 1 ) to establish a systematic framework for the research on the policies of agriculture industry and the structure of agriculture industry ; the framework for grand agriculture industry structure ; the framework of subject relationship in the agriculture socialized service system ; the circulation framework of sustainable development for agriculture ; the model framework for corporation development for agriculture institution ; ( 2 ) to expand the external scope of the concept of agriculture ; ( 3 ) to put forward the ideas of the corporation orientation by restructuring and innovating the present agriculture operational institution ; ( 4 ) to raise the viewpoints to set up the quality standard system for agriculture produce and to initiate the same system of the internal and external trade ; ( 5 ) to offer the suggestions on guiding the development of the township and private enterprises through the industry policies ; ( 6 ) to raise the innovative viewpoint by way of the systematic analysis on agriculture and the employment structure of the countryside, the district arrangement, technological innovation and the marketing system of agriculture produce ; ( 7 ) to put forward the comprehensive thinking way to broaden the logistics services for agriculture produce ; ( 8 ) to raise the new idea of the agriculture supporting system and the policy suggestions on expanding the areas for the government to support agriculture industry, reorganization of agriculture insurance system and aid to the weak masses of the countryside
本課題是在國家農業產業政策不斷完善和產業經濟學科科學發展的背景下，從農業產業政策的實踐出發，從大農業產業結構、組織、技術、資金、勞動力、土地等資源配置以及區域布局、國內外關聯等角度，以農業產業政策與農業發展的互動關系為切入點，提出了農業產業政策調整取向，初步形成和發展了政策理論。全文共分9章，主要運用一般均衡和局部均衡比較等理論，實證、規范經濟學研究等方法進行探討，對農業產業政策實施績效、農村需求結構、就業結構、農業生產要素和布局、農業可持續發展、農業國際化等命題以及對策建議作了比較全面深入的評析。本課題研究主要有以下創新觀點：初步搭建了農業產業政策和結構理論框架，設計了政策和結構體系圖；延伸了「農業」概念外延，提出了「大農業」的構想；提出了農業產業經營組織再造和創新的公司化發展方向，設置了農業產業化、公司化發展模式圖和產業化公司模型圖；設計了農業可持續發展良性循環圖和農業資金投入效益模型圖；提出了建立農產品質量標準體系、推行內外貿一體制的觀點；建立了農業保障體系參照圖，建議通過產業政策引導鄉鎮、私營企業和「三資」企業發展；剖析農村勞動力就業結構、區域布局、科技創新、農產品市場體系；提出了加大農產品物流配送的整體思路；提出了農業支撐體系新觀念及擴大政府支農范圍、重構農業保險體系、扶持弱勢群體的政策建議。Constant circulation flow pattern
等環量流型Based on prandtl ' s momentum transportation, this paper calculates in detail the physical quantities such as eddy viscosities, and ratio of eddy viscosity to motion viscosity, total stresses with respect to relative position in three regions of viscous sub - layer, buffer layer, and main turbulent stream for non - newtonian fluid flowing turbulently in ducts, which according to karman ' s three layer models and measurement of fluid parameters in evaluation apparatus, discusses the influence of polymer drag reduction on flowing properties of non - newton fluid, analyzes quantitatively principle of turbulent reduction phenomenon and condition of increasing reduction rate
摘要以普蘭德動量傳遞理論為基礎，按照卡門的三層模型，通過室內模擬環道用0號柴油及加入減阻劑在圓管內的流動參數的測定，計算了非牛頓型流體管內湍流邊界層的層流內層、過渡層、湍流中心的渦流粘度，渦流粘度與運動粘度比、總應力隨相對位置的變化等定量參數，探討了高分子減阻劑對非牛頓流體流動特性的影響，對湍流減阻現象的機理與增大減阻率的條件進行了定量分析。In this paper. flow properties of multistage fluidized - bed bioreactor with external circulation at a pilot scale is studied. according to characteristic analysis, the model of completely mixing reactor in series is introduced to characterize real reactor as a theoretical model. on the basis of analog computing analysis and discussion of theoretical model. by means of pulse tracer method, experiments on residence time distribution ( rtd ) have been done in different conditions including the change of tracer level, feeding flow rate and circulation flow rate. the result shows when the ratio of circulation flow rate and feeding flow rate amounts to at least 4, the flow properties of multistage fluidized - bed bioreactor with external circulation at a pilot scale is very close to the model of completely mixing reactor in series. an amendatory model has been established by the regression method
作者首先在對反應器進行特徵分析的基礎上，建立了描述中試規模多級外循環流化床生物反應器流動特性的串級全混流模型，並對理論模型進行了模擬計算分析和討論，在此基礎上，作者分別在無循環和有循環（改變示蹤劑用量、流加流量和循環流量）的條件下，利用脈沖示蹤法對一到五級串聯外循環流化床反應器進行了停留時間分佈實驗，結果表明，在循環流量與流加流量的比值達到大於等於4時，中試規模多級外循環流化床反應器的流動特性接近串級全混流模型，通過數據回歸擬合的方法，建立了中試規模一到五級串聯外循環流化床反應器的流動模型。According to the relationship of the angle of the maximum torque and the q axis, the reluctance torque for salient pmsm is made full use of and the sator current amplitude is reduced by a large percentage, so that the system robustness is greatly increased. at the speed loop, this paper presents a single value model algorithmic control strategy which is the simplied form of normal model algorithmic control and has less computation work than the latter, so the real - time performance is very good
對于嵌入式pmsm ，根據在電流幅值一定的條件下最大輸出轉矩與（為等效電流矢量和q軸之間的相位角）之間的關系，將磁阻轉矩轉換為輸出轉矩從而提高了輸出轉矩，改善了系統的控制性能；在速度環採用單步模型演算法控制，其計算量比較少，提高了系統的實時性和魯棒性。Power transformer test is simulanted in test - room, try to prove that online measure of transformer test is feasible. the test results are satisfaction. in the end, there is software design : the instrumented - test - interface is developed ; location computer entering to sample state is the same time, and after the same " log time ", it stops the data sample note. every test signal data keeping in the data note memorizer is at the same time, so it realizes data synchronization collection. some blocking design in the process of software design can apply to the other software
文章的最後，針對變壓器試驗微機測試系統對電流、電壓、功率等變量數據採集的特殊要求，分析了同步誤差的產生原因，給出了同步軟體采樣的無差條件；建立了電壓電流有效值和平均功率測量誤差的數學模型，提供了減小測量誤差的措施；應用「同步軟體采樣技術」 ，不需要增加采樣周期數，不需要硬體同步環節，較好地解決了同步誤差對測量精度的影響。分享友人