管式爐加熱器 的英文怎麼說
中文拼音 [guǎnshìlújiārèqì]
管式爐加熱器
英文
pie-still heater-
Series full - auto pipe expander with drawing device and program interface is used with extruding machine. it is also used solitarily, while expanding pipes, the machine adopts translation, the action is steady and corret, it does not damage pipe materical, the machine adoptes double - infrared heating oven type, each oven is equipped with heating cire, the shaping method adopts expanding - end shaping, the size of pipe mouth is correct. on its panel, there is a transfer swith of expanding solvent type pipe socket ( straigh port ) and expanding sealloop type pipe socket ( rport ). the choice of expanding pipe type is very convenient, the technologocal adaptability is strong, its main electric control elements are all imported. the syetem charecteristics are steady and reliable
配有與主機配套的接料牽引裝置和相應的程序介面,既能與擠管主機聯線使用,又可以作單機使用;擴管時管材的移動均採用平移方式,動作平穩準確而且不易損傷管材;這種機型採用紅外線加熱方式且為雙加熱爐型,每個加熱爐都配有中心加熱爐芯;成型方式均採用擴管頭定型方式,管口成型尺寸準確;該機型在控制面板上設有擴溶劑型承介面(直口)和擴彈性密封圈型承介面( r口)的轉換開關,擴管方式選擇十分方便,工藝適應性強;主要的電器控制元件均採用進口元件,系統性能穩定可靠。The new developments of htm station technique were introduced from the aspects such as changing the htm pipeline type in pet htm station, increasing the switch forms of steam atomization and compressed air atomization, increasing the steam generator, sending stripping tower off - gas to combination and using new material nd steel in air preheater
摘要從改變聚酯熱媒站的熱媒爐熱媒管線形式、增加蒸汽霧化與壓縮空氣霧化的切換形式、增加蒸汽發生器、汽提塔尾氣送燒、空氣預熱器採用新型材質nd鋼等方面介紹熱媒站技術的新發展。Single burner gas - fired overhead radiant - tube heaters. part 1 : safety
單鍋爐燃氣的頂置散熱管式加熱器.第1部分:安全性The new device consists of paint - drying box, heat carrier boiler, heating pipe, expansion tank, gas separator and oil tank, etc. the data of two applied examples shows that heat carrier paint drying method is able to make painting - drying cost drop by 88 %, compared with the conventional one, that it has some advantages such as uniform temperature field, good appearance and lower costs, compared with conventional hot air convection mode
該裝置主要由熱載體烤漆爐、輻射加熱管,熱載體爐、膨脹器、油氣分離器和儲油槽等組成。應用實例的測試數據表明,與傳統的遠紅外電加熱鋼瓶烤漆方式相比較,鋼瓶熱載體烤漆節能和降低能耗費用十分顯著,能耗費用降幅達到88 。與熱風爐對流烤漆方式相比較,熱載體烤漆方法不僅節能,而且烤漆爐溫度場均勻穩定,同時烤漆的外觀質量也得到了明顯提高。The object to study in this paper is the electric heat reservoir boiler, which is used to supply heat water and bask for the resident population. the use of the system define the character of the output medium with the lower request on quality and parameter, at the same time, it ask the boiler should has the higher character on the respect of the cost, reliability, economy, and so on. hence, the paper carefully design and study the system for the choice and design of the boiler core heating componet, the lay of the heat exchanger, the working status of the heat reservoir equipment, the adjustment and control mode of to supply heat water. the study work mainly include underside some contents, forexample : 1. to confirm the heat medium parameter to adapt the requirements of the most of the heating equipments and to design the instruction of the boiler and heat reservoir as simple as possible
圍繞上述原則,本文從電熱鍋爐核心加熱元件的選型及設計、換熱面的布置、蓄熱設備的運行工況、供熱的調節方式以及控制方法進行了較細致的研究和計算,具體研究工作有以下幾個方面: 1 .根據使用要求,確定適用於多數採暖設備的熱介質參數,設計在結構型式上盡可能簡單的鍋爐和蓄熱器; 2 .對製造加熱元件電熱管的各種材料進行了對比和分析、在結構尺寸上進行了仔細的分析和計算,根據實際使用條件給出合理的設計,使其具有較高的可靠性和使用壽命; 3 .對不同換熱面布置形式進行傳熱分析。Heat pipe air pre - heater is adopted to recover gas heat to heat up cold air for burning, reducing flue gas temperature and increasing heat efficiency of injecting steam boiler
採用熱管式空氣預熱器,利用排煙熱量加熱冷空氣,降低了煙氣溫度,減少排煙熱損失,提高注汽爐熱效率。Production test of the production line is showed that anneal furnace combustion system with regenerative radiant - tube combustor compare with conventional radiant tube burner not only have superiorities on saving energy and environmental protection but also have advantages on temperature distribution and temperature control properties
生產線試生產的情況表明,退火爐燃燒系統使用蓄熱式輻射管燃燒器比使用常規輻射管燃燒器不僅在節能、環保方面具有優勢,而且在加熱均勻性和爐溫控制方面也有一定優越性。The bpvo aims at regulating the standards and operation of equipment such as boilers, pressure vessels, including thermal oil heaters, steam receivers, steam containers, air receivers and pressurised cement tanks mounted on trucks or trailers
《鍋爐及壓力容器條例》旨在對鍋爐、壓力容器等器具的標準及操作加以規管。鍋爐及壓力容器包括熱油式加熱器、蒸汽容器、蒸汽甑、空氣容器,以及貨車或拖車上的加壓水泥槽。The bpvo aims at regulating the standards and operation of equipment such as boilers, pressure vessels, including thermal oil heaters, steam receivers, steam containers, air receivers and pressurised cement tanks mounted on trucks or trailers. our work and achievements in 2002
《鍋爐及壓力容器條例》及其附屬規例旨在對鍋爐、壓力容器等器具的標準及操作加以規管;鍋爐及壓力容器包括熱油式加熱器、蒸汽容器、蒸汽甑、空氣容器,以及貨車或拖車上的加壓水泥槽。Abstract : the in servie tubular heaters built early in refineries and chemical plans have low thermal load and low heat efficiency, therefore measures for technical reform are offered, including ( 1 ) enlarging the surface area of convection tubes to increase the thermal load of rhe convection section ; ( 2 ) increasign the heat interchanging area of radiant tubes ; ( 3 ) changing the height of the chimney ; ( 4 ) using new burner with forced air supply to increase calorific capacityu ; ( 5 ) adding air preheater between the convection section and chimney to enhence the temperature of the air entering the furnace ; ( 6 ) adopting high temperature radiant coating to improve the effect of radiant heat interchanging
文摘:針對早期建造的煉油廠和化工廠在役管式加熱爐熱負荷和熱效率低的狀況,提出了若干技術改造措施包括,增大對流管表面積以增大對流段的熱負荷;增加輻射管的換熱面積;修正煙囪高度;換用新型燃燒器,變自然通風為強制供風,以增大燃燒器的發熱量,減小過剩空氣系數,節省燃料2 % 3 % ;在對流段和煙囪之間增設空氣預熱器以提高空氣入爐溫度;採用高溫輻射塗料增強輻射換熱效果,從而增加熱源對爐壁的輻射傳熱量和爐管的傳熱量等。The in servie tubular heaters built early in refineries and chemical plans have low thermal load and low heat efficiency, therefore measures for technical reform are offered, including ( 1 ) enlarging the surface area of convection tubes to increase the thermal load of rhe convection section ; ( 2 ) increasign the heat interchanging area of radiant tubes ; ( 3 ) changing the height of the chimney ; ( 4 ) using new burner with forced air supply to increase calorific capacityu ; ( 5 ) adding air preheater between the convection section and chimney to enhence the temperature of the air entering the furnace ; ( 6 ) adopting high temperature radiant coating to improve the effect of radiant heat interchanging
針對早期建造的煉油廠和化工廠在役管式加熱爐熱負荷和熱效率低的狀況,提出了若干技術改造措施包括,增大對流管表面積以增大對流段的熱負荷;增加輻射管的換熱面積;修正煙囪高度;換用新型燃燒器,變自然通風為強制供風,以增大燃燒器的發熱量,減小過剩空氣系數,節省燃料2 % 3 % ;在對流段和煙囪之間增設空氣預熱器以提高空氣入爐溫度;採用高溫輻射塗料增強輻射換熱效果,從而增加熱源對爐壁的輻射傳熱量和爐管的傳熱量等。Multi burner gas - fired overhead radiant tube heater systems for non - domestic use - part 1 : system d, safety ; german version en 777 - 1 : 1999 a1 : 2001 a2 : 2001 a3 : 2002
非家用架空式多用燃氣爐輻射管加熱器系統.第1部分: dMulti burner gas - fired overhead radiant tube heater systems for non - domestic use - part 2 : system e, safety ; german version en 777 - 2 : 1999 a1 : 2001 a2 : 2001 a3 : 2002
非家用架空式多用燃氣爐輻射管加熱器系統.第2部分: eMulti burner gas - fired overhead radiant tube heater systems for non - domestic use - part 3 : system f, safety ; german version en 777 - 3 : 1999 a1 : 2001 a2 : 2001 a3 : 2002
非家用架空式多用燃氣爐輻射管加熱器系統.第3部分: fMulti burner gas - fired overhead radiant tube heater systems for non - domestic use - part 4 : system h, safety ; german version en 777 - 4 : 1999 a1 : 2001 a2 : 2001 a3 : 2002
非家用架空式多用燃氣爐輻射管加熱器系統.第4部分: h分享友人