組合凸輪 的英文怎麼說

中文拼音 [zǔgětūlún]
組合凸輪 英文
compound cam
  • 組 : Ⅰ名詞1 （由不多的人員組成的單位） group 2 （姓氏） a surname Ⅱ動詞（組織） organize; form Ⅲ量詞（...
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 凸 : Ⅰ動詞（高出） bulge; protrude Ⅱ形容詞（高於周圍） protruding; raised
  • 輪 : Ⅰ名1 （輪子） wheel 2 （像輪子的東西） wheel like object; ring; disc 3 （輪船） steamer; steamboa...
  • 組合 : 1 （組織成為整體） make up; compose; constitute 2 （組織起來的整體） association; combination3 [...
  1. This article introduces the application of group technique in processing ringent cam for weaving machine, and the result shows that processing cost could he effectively lowered and the production efficiency improved through the combination of advanced processing technique and skilled grouping technique

    摘要通過將成組技術應用在織機用開口凸輪加工過程，實際應用效果顯示，先進的加工技術與發展相對成熟的成組技術相結合，可以有效降低加工成本，提高生產效率。
  2. Universal method and common software of unitized design for internal combustion engine cam

    內燃機凸輪組合設計通法與通用軟體開發
  3. Analyzing the velocity and acceleration of the follower based on the assur - group method and the inversion of the mechanism. 4

    3 .以桿組分析方法為基礎，結合轉化機構原理及凸輪機構的相對速度理論進行從動件的速度和加速度分析。
  4. The study finished is as follows. ( 1 ) a method of synthesizing the types of cam - linkage mechanism is introduced. it includes the prerequisites, existing criterions and process of transforming link mechanisms into cam - linkage combined mechanisms, as well as the way to catalogue all the combined mechanisms

    凸輪連桿機構在精確實現預期軌跡方面有較大的優越性，本文主要對其進行研究，主要完成以下工作: （ 1 ）介紹凸輪連桿組合機構的類型綜合方法，包括由連桿機構轉換成凸輪連桿組合機構的必要條件、存在判據和轉換步驟，以及組合機構的編目方法，指出了文獻[ 12 ]的不足之處。
  5. The acceptability our rejection and the depiction of some content in the course " mechanisms and machine theory " is discussed, ( e. g., group dividing, solving steps of the graphical method for vector equation, versions and methods for analytical kinematic analysis, inversion design for linkage mechanisms, crank angle between the two limiting positions, design formulae for cam mechanisms, classification of combined mechanisms, formula of the radius of addendum circle of gear, balancing of machinery, etc. ) and some new opinions are presented

    摘要就《機械原理》課程的某些內容（如：拆桿組的方法、矢量方程圖解法的解題步驟、運動分析解析法的版本和方法、連桿機構的反轉法設計、極位夾角、凸輪機構設計公式、組合機構的分類、齒輪齒頂圓半徑公式、機械的平衡等）的取捨和敘述進行探討，提出一些新的看法。
  6. So we can complete the kinematic analysis of the cam mechanism by the analysis of the corresponding assur - group. based on the method, this paper deals with plannar disc - cam mechanisms with different types of followers. the main points of this paper are as follows

    基於桿組的分析方法，本文圍繞各種類型從動件的平面盤形凸輪機構做了如下工作： 1 .根據凸輪機構的檢測數據利用三次周期樣條函數插值法對凸輪實際廓線進行曲線擬合。
  7. The precise locus from cam - bar linkage

    用凸輪連桿組合機構精確實現軌跡
  8. Principle and dimension comprehensive method of a kind of new cam - link grouping mechanism

    一種新型內凸輪連桿組合機構的原理與尺度綜合
  9. By using activex techniques to call the objects in autocad software, the cam profile could be plotted interactively, the system could used to design the cam for planar and combined cam mechanisms in the fields of engineering simulation, design, and computer aided instruction ( cai )

    該系統針對平面凸輪機構、凸輪-連桿組合機構中的凸輪進行設計，可應用於工程模擬、設計和計算機輔助教學。
  10. By using the method, 6, 8, 10, 2 and 4 cam - linkage mechanisms are deduced from the 2 existing six - bar kinematic links in order to accomplish function, motion trace, trace, plane motion refer to timing and plane motion regardless of timing respectively. and 48 cam - linkage mechanisms are deduced form the 16 existing eight - bar kinematic links to accomplish plane motion refer to timing. the method is also useful in multibar kinematic links ’ transformation and helpful in developing new cam - linkage combined mechanisms

    並採用此方法，對現有的2種基本型式的六桿運動鏈進行轉換，得出6個實現函數、 8個實現運動軌跡、 6個實現軌跡、 2個實現平面運動1和4個實現平面運動2的凸輪連桿組合機構;對16種基本型式的八桿運動鏈進行轉換，得出48個實現平面運動1的凸輪連桿組合機構。
  11. Then the center ' s track equation of the circular cutter which was used to manufacture the cam was presented. for the problem of designing on combined cam mechanism which follows the given track, typical nodes in the track were selected at first. then the spline interpolation method was employed to plot the smooth track

    針對實現特定軌跡的凸輪一連桿組合機構設計問題，文中首先選取軌跡上有代表性的節點，採用樣條插值法繪出光滑的軌跡曲線，進而具體分析從動件的位移、類速度、類加速度，最後對凸輪-連桿組合機構進行設計。
  12. So as a new precision transmission device, it is provided with widely application prospects in many industry fields such as robot industry, machine industry, instrument industry, etc. the project originates from the national " 863 " plan, named " the research and application on new spatial cycloid - ball gearing " ( no. 2001aa423190 )

    新型空間凸輪活齒傳動具有傳動精度高、嚙合間隙可調、自鎖性能好等優點，因此作為一種新型的精密傳動裝置，在機器人、機床、儀器儀表等工業領域有著廣泛的應用前景。本課題來源於國家「 863 」計劃「新型空間凸輪活齒精密傳動及其應用研究」 （課題編號： 2001aa423190 ） ，有關該新型傳動設計理論與方法的研究是該課題的重要組成部分。
分享友人
分享到 Line

分享到臉書