結鋼 的英文怎麼說

中文拼音 [jiēgāng]
結鋼 英文
node steel
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 鋼 : 鋼名詞（鐵和碳的合金） steel
  1. The brass plate must be adherent to the steel.

    黃銅片必須和鋼粘結。
  2. On the basis of the basic theory of metal distortion, using round steel alit rolling as entity model and combining with production practice, the selection of slit location, slit mode and the design parameter of slit pass system were analyzed, and the area calculation model of pre - slit rolled piece and slit rolled piece was built

    摘要基於金屬塑性變形基本理論，以圓鋼雙線切分為基本實體模型，結合生產實踐，對切分位置、切分方式的選擇和切分孔型系統的設計參數進行了分析，並建立了預切分軋件和切分軋件的面積計算模型。
  3. The welding performance of homemade wear - resistant cast steel has been studied base on the weldability tests, the repair welding procedures of wean - resistant cast steel ( abrasion - plates ) have been made up, the results show that satisfying repair welding quality can be attained with such welding conditions as the low hydrogenous alkalescent welding rod, preheating and slow cooling, strictly maintaining the interbedded temperature of 250 ~ 300 and controlling welding technique

    通過對其焊接性能的試驗研究，制定了該類鑄鋼件（磨耗板）的補焊工藝：低氫型堿性焊條，預熱與緩冷相結合的工藝措施，嚴格控制層間溫度（ 250 ~ 300 ）及焊接工藝規范，可獲得滿意的修復質量。
  4. The main sales of special steel companies, if carbon steel guitar, a guitar steel, stainless steel, spring steel, with the steel, heat - resisting steel, and based on user needs sugar processing various materials can be expected on the basis of the specific needs of users

    本公司主要銷售各種特殊鋼，如碳結鋼，合結鋼，不銹鋼，彈簧鋼，合工鋼，耐熱鋼，並可根據用戶需要加工各種材質鍛件，也可根據用戶具體需要下料。
  5. Steel tie bar for masonry

    砌體拉結鋼筋47
  6. The layered combined finite element model is taken in the finite analysis of concrete and bonding bar. in the nonlinear analysis ofunbonded prestressed concrete, the effect that unbonded tendons acts on concrete is replaced by equivalent force in the method of equivalent prestress

    在有限元分析中，混凝土和粘結鋼筋採用分層組合式的有限元模型，在無粘結預應力混凝土的非線性分析中，將無粘結預應力筋對混凝土的作用，借鑒預應力的荷載平衡法，用其等效力來代替預應力作用。
  7. Sf - gp - cyp - iii mainly used for surface quenching, welding, metal powder sintering tube seam annealing and metal parts heat penetrating

    主要用於鋼鐵機械零件的表面淬火釬焊粉末金屬的燒結，鋼管焊縫的退火，以及金屬部件的透熱等。
  8. Determing the technical parameters influencing fe - sm - c sintered steel with optimizing choice

    燒結鋼力學性能的工藝參數
  9. Sintered metal materials ; sint - guide - lines ; part 6 : fatigue strength of sintered steels

    燒結金屬材料.燒結指南.第6部分:燒結鋼的振動強度
  10. Optimization of secondary operations according to geometry of component made of low alloyed sintered steel

    與低合金燒結鋼零件形狀相對應的后續處理條件最優化研究
  11. Powder metallurgy. sintered steels and alloys excluding hardmetals. determination of total carbon and non - combined carbon contents

    粉末燒結.除硬質合金以外的燒結鋼和合金鋼.總碳量和非化合碳含量的測定
  12. Sintered metal materials. specifications. part 2 : sintered iron and sintered steel containing one or both of the elements carbon and copper, used for structural parts

    燒結金屬材料.規范.第2部分:結構部件用含元素碳或銅或二者均含有的燒結鐵和燒結鋼
  13. Mixing alloy elements of ni, mo, w in fe - c - cu alloy, the sintered steel was prepared. the microstructure and wear resistance properties of the sintered steel had been studied. the influence of heat - treated technology and the alloy elements on the microstructure and the wear resistance had been studied and analyzed

    以fe - c - cu合金為基粉，添加合金元素ni 、 mo 、 w制備燒結鋼，並對試樣進行了微觀組織和耐磨性分析，系統地研究了熱處理工藝及合金元素鎳、鉬、鎢的復合添加對燒結鋼組織和耐磨性的影響。
  14. Results of the experiments showed that the wear mechanisms of the sintered steel included abrasive wear, adhesive wear and fatigue wear, and it was the abrasive wear most important. it was the sintered steel mixed by ni, mo that was the best on the wear resistance, because of the great lot of bainite ; the sintered steel quenched and low temperature tempered mixed by mo, w that was the best on the wear resistance, because of the rigidity of the steel was the highest

    實驗結果表明：本文中幾種燒結鋼的磨損機制均是由磨粒磨損、粘著磨損、和疲勞磨損共同作用的，且以磨粒磨損為主；在燒結態下，復合添加合金元素鎳、鉬的燒結鋼的耐磨性能最好，這是因為生成了大量的硬質相貝氏體；而淬火、低溫回火態下，則復合添加鉬、鎢的燒結鋼的耐磨性能最好，這是因為熱處理態下添加鉬、鎢的燒結鋼的硬度最高。
  15. The raw materials are 10 45 carbonized structural steel, the low - alloy steel, the bearing steel, and so on

    用料為10 45碳結鋼低合金鋼軸承鋼等。
  16. Founded in 2000, we mainly produce and export all kinds of steel products, mainly products are mild steel wires, h beams, carbon round steel, alloy structual steel, ipe and so on

    公司成立於2000年，主營優特鋼，型材，拉絲用線材，釘屑，廢鋼，碳結鋼，齒輪鋼，合結鋼，主要出口到歐洲，東南亞，中東，南美，北美國家。
  17. In order to play the whole advantage of supply chain, realize the information sharing, supplement with each other ' s advantages, reach a result of two - wins and set up a steady and healthy cooperative partner and strategic alliance relation, this paper proposes to choice the supplier by combining the actual situation of kunlun machine factory according to the supplier ' s choice standard and method, and then sets up a supplier evaluated indexes system of kunlun machine factory. with the example of the purchase of carbon - forms steel in hai - 2000 productions, the fuzzy - evaluation method is applied in evaluate three supplier of kunlun machine factory, and on the basis of it the encourage measures of different kinds of suppliers is studied. the paper also analyses the influence of e - business to enterprises material purchased and probes into the material purchase strategies under the environment of e - business ; finally, a supply chain integrated performance evaluate index system is designed according to the analyses of supply chain management theory, and two methods of self - evaluated and pole - evaluated are adopted in evaluate the supply chain purchase integrated performance of kunlun machine factory

    論文在對采購管理和供應鏈管理理論綜述的基礎上，根據昆侖機械廠采購管理現狀和軍品采購的特點，分析了昆侖機械廠物資采購中存在的問題，研究了昆侖機械廠物資分類采購的策略；為了發揮供應鏈的整體優勢，實現信息共享，優勢互補，達到雙贏效果，建立穩定健康的戰略合作夥伴，按照供應商的選擇標準和方法，結合昆侖機械廠實際對供應商進行選擇，並建立了昆侖機械廠供應商綜合評價的指標體系；以昆侖機械廠的海2000產品中的碳結鋼物資采購為例，運用模糊綜合評價方法對該廠的三家供應商進行了綜合評價，在此基礎上，研究了不同類型的物資供應商的激勵措施；論文分析了電子商務對企業物資采購的影響，探討了昆侖機械廠電子商務環境下的物資采購策略；根據供應鏈管理理論構建了昆侖機械廠物資采購供應鏈，設計了昆侖機械廠供應鏈采購整體績效評價的指標，採用自我評價和標桿評價方法對昆侖機械廠供應鏈采購整體績效進行了評價。
  18. Compression dispersion - type anchor can be mainly classified into two categories, one of which is that, plastic coated strands in different length are respectively passed through their own bearing bodies and pre - bent as their midpoints to be t he shape of " u ", then forming several totally unbonded strand loops, i. e. unit anchor tendon. as the research object in this paper, study is performed on the anchor holding capacity, load - displacement behavior, displacement of the fixed anchor length, strain and bond stress distribution, and the removability of anchor tendon, furthermore, with the aid of analytical solution, the distribution of the bond stress is calculated and analyzed, based on the results of test and analytical solutions, design method is provided in this paper

    壓力分散型錨索主要有兩種結構型式，本文是以將不同長度的無粘結鋼絞線分別繞過不同的承載體彎曲成「 u 」形而組成各個單元錨索體這種型式為研究對象，對其承載力、荷載位移特性、錨固段位移特徵、應變與粘結應力分佈特徵以及錨索體的可回收性能展開研究，並藉助于理論分析研究其粘結應力分佈狀態，然後在此基礎上提出了壓力分散型錨索的設計計算方法。
  19. Double side of concrete panel can bear and deform coincidently because angle - steel frame and steel wire confined, it ensured durable character of sandwich wall, too, due to thick of wall increasing, wall ' s stable bearing strength was improved

    雙側的混凝土面層保證了墻體的耐久性；由於角鋼邊框和拉結鋼絲對雙側混凝土面層的約束，保證了雙側墻板的協同變形和承載能力；保溫層增大了墻體厚度，提高了墻體的平面外穩定性。
  20. Firstly, this paper describes theoretical formula through analysis some behavior in loads of axial compression, draught, bend and part compression. then pays attention to analyses limitation of material and effect of this limitation, summarize bad influence of unqualified perfusion on material behavior. finally, a feasible dumbbell - shape stcc bridge " s construction plan is summarized through analysis the special project accident

    論文的主要目的是通過大量的國內外試驗研究數據，分析鋼管混凝土軸壓、受拉、壓彎及局壓等情況下材料的受力狀況，給出簡明的計算公式；為工程設計提供合理的計算方法；著重分析、總結鋼管混凝土技術缺陷及其對實際工程的影響；提出鋼管混凝土質量保證措施和澆築質量對材料性能的影響。
分享友人
分享到 Line

分享到臉書