耐磨鍍層 的英文怎麼說

中文拼音 [nàimódùcéng]
耐磨鍍層 英文
abrasion resistant coating
  • 耐 : 動詞（受得住; 禁得起） be able to bear or endure
  • 磨 : 磨動詞1 （摩擦） rub; wear 2 （研磨） grind; mull; polish 3 （折磨） grind down; wear down [out]:...
  • 鍍 : 動詞（用電解或其他化學方法使一種金屬附著到別的金屬或物體表面上） plate
  • 層 : i 量詞1 （用於重疊、積累的東西 如樓層、階層、地層） storey; tier; stratum 2 （用於可以分項分步的...
  • 耐磨 : abrasion resistant; anti friction; wear resistant; wear resisting; wearproof耐磨材料 high abrasiv...
  1. The result shows that with the addition of rare earth elements, ultrasonic irradiation and magnetic field, the chemical component, surface configuration, microstructure and properties of electroless co - ni - b and co - fe - b alloy changes remarkably. such kind of change can be described as the followings. firstly the depositing speed of electroless alloy bath is raised while the polarizability and cathodic overpotential are reduced ; secondly the surface quality of the alloy coating and adhesion of the coating and matrix are improved ; thirdly in the coatings the content of the elements in the transient group increases, but the content of cobalt decreased ; fourthly the amorphous structure is transformed to microcrystal structure and polycrystal structure ; fifthly the microhardness and wear resistance of the coating are enhanced ; sixthly coercitive force is reduced, and magnetoconductivity of the coating is increased ; lastly the magnetic intensity of the coating increases with the addition of energy and light rare earth elements such as ce, la and decreases with the addition of heavy rare earth elements such as y. on the other side, when the alloy coatings passes through the heat treatment under the temperature of 250 or 500, their properties will change

    結果顯示化學沉積co - ni - b 、 co - fe - b工藝在稀土元素（ ce 、 la 、 y 、 dy ） 、能量（超聲波、磁場）介入后，沉積過程、合金成分、鍍層形貌結構和性能都有顯著變化，表現在：鍍液的陰極極化過電位和極化度降低，沉積速度提高；鍍層的結合力、表面質量改善；鍍層中過渡族元素的含量增加，輕元素硼的含量降低，同時證實了稀土元素與過渡族元素共沉積的可能性；鍍層的顯微結構由非晶態向微晶和多晶態轉變；鍍層的顯微硬度與耐磨性提高，力學性能優化；鍍層的矯頑力降低；磁導率提高；鍍層的磁化強度在能量（超聲波、磁場）和輕稀土元素ce 、 la介入后提高，重稀土元素y介入后降低。
  2. The factory s electroplating products has : quality assurance, high wear resistance, hardness, acid, alkali inside, in the above - tolerance mold repair complex, complicated shape blind hole, uniform coating, extrusion sheet metal plating and maintenance characteristic. it is get the clients praise trust and praise

    本廠電鍍加工產品特點：質量保證高耐磨硬度高內酸內堿，可以在模具上面超差修復，盲孔形狀復雜鍍層均勻，擠出板材等鍍硬鉻，深受全國各地客戶的信賴和好評，
  3. There is considerable evidence that the hardest deposits do not necessarily give the greatest wear resistance.

    有大量的證據足以證明，最硬的鍍層未必能得到最大的耐磨性。
  4. Methods of wear resistance test for metallic coatings

    金屬鍍層的耐磨性試驗方法
  5. The dispersion and diffusion of the effective nickel plating solution were enhanced by adding a small amount of rare earth compound, the depositing rate, hardness, anti - wear and the surface quality of the coating were accordingly improved

    摘要通過在快速鎳電刷鍍液中加入少量稀土化合物，改善鍍液的分散能力和深鍍能力，提高鍍層刷鍍速度，從而增加鍍層的硬度和耐磨性，改善鍍層表面質量。
  6. After heat treatment, hardness of the coating is greatly improved because of precipitation of niap phase, while the difference of wear resistance between low - p coatings and high - p ones becomes little

    鍍層經熱處理后，由於ni _ 3p的析出使鍍層硬度得以提高；低磷鍍層和高磷鍍層在熱處理后的耐磨性能燕山大學工學博士學位論文差別不大。
  7. But the wear performance showed that the wear capacity reduced considerably and it had a lower friction coefficient

    但是耐磨實驗說明，復合鍍層的磨損率明顯降低，而且鍍層的摩擦系數很小。
  8. Smtc paper - belt abrasive - resisting testing machine is designed and developed by this company, thich is mainly used for the surface abrasive - resising and solvent resisting testing f the paint membrane, printing ink, dying printing and plating coating of the product made of rubber, plastics and metal. etc,

    Smtc紙帶耐磨測試機是本公司研發的產品表面耐磨檢測儀器，主要用於矽膠、橡膠、塑膠、金屬等產品的表面漆膜、油墨、染色印刷、電鍍塗層等表面耐磨檢測。
  9. The effect of nano - powders on the hardness, wear resistance, corrosion resistance, temperature tolerance and antifrication of composite coating were reviewed along with the co - deposition mechanism and development of nano - powder composite coating in recent years

    摘要綜述了納米顆粒在復合鍍層中對提高鍍層的硬度、耐磨性、耐蝕性、耐高溫性能、減摩性能的作用，以及近年來有關納米顆粒在復合鍍層制備過程中的沉積機理及其研究與應用現狀。
  10. Methods of test for anodic oxidation coatings on aluminium and its alloys - determination of surface abrasion resistance

    鋁及鋁合金陽極氧化鍍層試驗方法.第18部分:表面耐磨性測定
  11. Gilt accessories are from american technology. pure thick gilt increase the ability of attrition proof and anti - ultraviolet. this can guaranteed the sumptuous and elegant appearance of the products

    鍍金配件採用美國技術，完全鍍厚金加強鍍金層的耐磨抗紫外線輻射效果，保證富麗堂皇的高雅外觀。
  12. ( 5 ) sic content in coating was 20. 11 ( vol % ). coating was fine and close. the hardness was 2. 68 times pure ni coating, and wear - resistance was 4. 1 times pure ni coating

    （ 5 ）對所得鍍層的性能進行了檢測，鍍層中sic粒子含量為20 . 11 （ vol % ）且均勻緻密;鍍層的硬度和耐磨性分別提高到純鎳鍍層的2 . 68倍和4 . 1倍;結合力實驗也表明鍍層與基體具有良好的結合力。
  13. This is because a solid film can be formed in the coating containing ptfe. it features good lubricity, less friction coefficient. at the same time, the sic particles can improve the wear resistance of the coating

    這是由於鍍層中的ptfe微粒在磨損時可形成固體潤滑膜，具有潤滑性好、摩擦系數小等特性；而鍍層中的sic硬質粒子提高了鍍層的耐磨性。
  14. Electroplating on magnesium alloy can get a quite bright alloy - layer which has better antiseptic ability and conductive performance, the alloy - layer raises hardness, anti - corrosion and wearability of the surface of the magnesium alloy. the electroplating coating as the preconditioning can carry on regular shelter and decorating, so electroplating is a good method to obtain highly anti - corrosion metallic coating

    鎂合金表面電鍍是在液相中沉積出具有相當防腐能力和導電性能的光亮鍍層，這層均勻的鍍層提高了鎂合金表面的硬度、耐蝕和耐磨性，作為鎂合金件的預處理防護層，就可以進行常規的防護和裝飾，因此，電鍍是獲得耐蝕金屬塗層的好方法。
  15. Research on the friction and wear behavior of nano particle composite coating on plastic injection mould parts

    注塑模零件電刷鍍納米鍍層的耐磨性能研究
  16. This paper presents a new way to prepare wear - resistance ni - fe alloy coating for a crystallizer used in continuous casting and the wear mechanism of the alloy coating has been investigated

    本論文試圖研製一種新的、適用於連鑄機結晶器上使用的耐磨合金鍍層? ? ni - fe合金鍍層，並研究合金鍍層的耐磨機理。
  17. Wear - resistant testing method of the metal deposits and conversion coatings for the light industrial products

    輕工產品金屬鍍層和化學處理層的耐磨試驗方法
  18. Smtc versatile friction testing machine is designed and developed by this company, which is mainly used for the surface abrasice - resisting and solvent resisting testing of the paint membrane, printing ink, dying printing and plating coationg of the product made of rubber, plastics and metal, bear the melting agent test. etxc

    Smtc多用磨擦測試機是本公司研發的產品表面耐磨檢測儀器，主用於矽膠、橡膠、塑膠、金屬等產品的表面漆膜、油墨、染色印刷、電鍍塗層等表面耐磨，耐溶劑測試。
  19. The hardness and the wear - resistance of abs are evidently improved, and its serviceable life is prolonged by composite plating. therefore, the application of abs is expanded by composite plating.

    對abs進行復合電鍍可以大大提高鍍層的硬度及耐磨性，擴展abs塑料的應用范圍，延長材料的使用壽命。
  20. The preparation and classification of nano - powders composite coating, and properties such as wear resistance, antifrication, corrosion resistance, temperature tolerance, self - lubrication, catalyzing and conduction of magnetic force were reviewed, along with the co - deposition mechanism and the influencing factor of nano - powder composite coating in recent years

    摘要介紹了納米復合鍍層的制備、分類及耐磨減磨、耐腐蝕、耐高溫、自潤滑、催化、導磁導電等方面的性能，綜述了近年來有關納米顆粒在復合鍍層制備過程中的沈積機理和影響因素。
分享友人
分享到 Line

分享到臉書