聚合物粘度 的英文怎麼說

中文拼音 [jùgěwùniándù]
聚合物粘度 英文
polymer viscosity
  • 聚 : 動詞（聚集; 聚積） assemble; gather; get together
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 物 : 名詞1 （東西） thing; matter; object 2 （指自己以外的人或與己相對的環境） other people; the outsi...
  • 粘 : 粘動詞（粘附） glue; stick; paste; adhere to; bond
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  • 聚合物 : [化學] polymer; polymerizate; polymeric compound; polymeric substance; polymeride; polymerized su...
  • 聚合 : 1 （聚集到一起） get together2 [化學] （單體結合成高分子化合物） polymerization; polymerize 3 [生...
  1. In order to solve the above - mentioned problems, the present invention provides a method for plating a polymer material with a metal film, which can form the film on the surface of polymer materials, which are difficult to plate by the prior wet plating method, at a relatively low cost in comparison to the dry plating method and exhibits a uniform thickness and a good adhesion of the metal film and further, shows a good reproducibility

    為了解決上述問題，本發明提供了一種給聚合物材料上鍍金屬膜的方法，用該方法可以在聚合物材料表面形成膜層，這是原來的工藝難于做到的，而且比干鍍成本低，鍍層厚度均勻，金屬膜的粘附性好，最後，還顯示出好的重現性。
  2. Plastics - determination of the transient extensional viscosity of polymer melts

    塑料.聚合物熔體瞬態拉伸粘度的測定
  3. The viscosity of the polymer was 2. 16 poise.

    聚合物的粘度為2.16泊。
  4. These characteristics and phenomenons have effect on the quality of gear pump, and it is difficult relatively to research them by theory. at present the research is limited to the phase of examination testing. theoretic research of the characteristics and the phenomenons of polymer gear pump are blank in china when the gear pump feeds the viscous polymer liquid of chemical flow with high temperature and high pressure

    齒輪泵除具有流量和容積效率、扭矩和機械效率、功率和總效率等基本特性外，還存在著困油、噪聲和氣穴等現象，這些特性和現象直接影響齒輪泵的質量，對斜齒齒輪泵的這些特性和現象的理論研究難度較大，目前大多仍局限於實驗測試研究階段，而聚合物齒輪泵在輸送化工流程中的高溫、高壓的粘流態聚合物時特性的理論研究在國內基本還處于空白。
  5. The grade composite, road performance and its mechanism are systemically studied. 1 ) the aggregate grade of ogfc is studied through the volume method base on the analysis of the aggregate grades. then the grade is verified and the relation between the grade and pore rate is studied statistically, the typical grades of ogfc are developed ; 2 ) the reasonable pore rate of ogfc is studied on the basis of the balance of mechanics and function performance ; 3 ) the mineral fiber is added to the ogfc mixes to increase asphalt content, thus the anti - water performance of ogfc mixes are improved ; 4 ) high viscous asphalt fit for the preparation of ogfc is prepared through composite modification by sbs and rubber powder ; 5 ) the mechanics mechanism of ogfc is studied in the paper, it shows : asphalt paste, as well as the coarse aggregate skeleton, is essential to the mechanics of ogfc

    在分析各國ogfc級配的基礎上，運用礦料體積法進行ogfc級配設計，用正交實驗對礦料級配進行了優化設計，運用數理統計方法分析礦料級配和孔隙率之間的關系，並回歸出礦料關鍵篩孔通過率與ogfc骨架空隙結構關系的數學方程，進而提出了ogfc的合理級配；通過對不同孔隙率典型級配混合料的性能研究，綜合力學和功能性能，得出了ogfc的合理孔隙率范圍：針對高速公路面層對ogfc力學性能方面的要求，本文從瀝青膠結材料、纖維穩定劑兩方面對ogfc的性能進行改善：通過sbs和橡膠粉復合改性的方法開發出了適合ogfc的高粘度改性瀝青，摻加聚合物纖維，提高ogfc的最佳瀝青用量，進而改善了混合料的高溫性能和抗水損害性能，優化設計出能滿足高速公路路用性能，車轍動穩定度達5000次/ mm以上，動融劈裂強度比90 ，透水系數31ml / s ，並具有防滑降噪功能的開級配瀝青磨耗層（ ogfc ）混合料。
  6. ( 2 ) it is found that distilled water as lubricant can markedly reduce the accumulation of friction heat and temperature rise on the frictional surfaces of polymer. so the heat fatigue and adhesive wear decrease. moreover, a lubricating film forms on the interface between the counterpart and polymer when distilled water acts as polar lubricant

    （ 2 ）潤滑劑水的存在，可大幅度降低聚合物磨損表面的摩擦熱積累及溫升，從而減少了基體的熱疲勞磨損和粘著磨損，同時，水作為一種極性潤滑劑，在摩擦界面上能形成一層潤滑膜，對摩擦表面起了一定的隔離作用。
  7. According to each ingredients ( water retaining admixture, polymer, inorganic mineral ) " effect to mortar ' s behaviors ( water relentivity, strength, contractility ) in exclusive mortar " s composite addition, the text defines each ingredient ' s quantity scope, then define the mix through cross experiment. we compared the aac exclusive mortar ' s behaviors such as water relentivity, compressive strength, binding strength, shrinkage, flexural strength and others to ordinary mortar ' s ones, it turn out to be that there is much improve in former ' s behaviors such as water relentivity, compressive strength, binding strength, shrinkage, flexural strength etc, it also shows that the aac exclusive mortar can improve the crack in aac brick walling to a certain degree

    並根據專用砂漿中復合外加劑的各個組分（保水劑、聚合物、無機礦物等）對砂漿主要性能（保水性、強度、收縮性、抗彎性等）的影響來確定每個組分的摻量范圍，再通過正交實驗確定最佳配合比，然後就普通砂漿與專用砂漿的保水性、抗壓強度和粘結強度、收縮值、抗彎曲性能以及其它性能進行了對比，對比結果表明專用砂漿的保水性、抗壓強度和粘結強度、收縮值、抗彎曲性能以及其它性能較普通砂漿都有了很大的提高，說明加氣混凝土砌塊專用砂漿在一定程度上可以改善加氣混凝土砌塊墻體的開裂情況。
  8. Viscosity should be maintained above 45 sec / qt. maintain with xcd rather than with bentonite. monitor hole cleaning at shakers and adjust low end rheology as required

    鉆井液粘度應當保持在每誇脫45秒左右，要用生物聚合物來維護，不要用膨潤土。通過振動篩觀察井內是否干凈，按要求把最終的流變參數調低。
  9. In the aspect of improving the cracking feature, compatibility and flexibility, the author has done experiments, including strength, modulus of elasticity experiments, and design some experiments similar to the practical structure and circumstance including adhesion strength between fresh mortars and old ones, between mortar and polystyrene board, mortar shrinkage in concrete circle, mortar shrinkage at different strength and different polymer - cement ratio, and temperature deformability at different strength and different polymer - cement ratio on mortars, on different type of formwork and on mortars with different type of formwork

    在改善砂漿抗裂性、提高柔韌性和協調變形能力方面，進行了不同聚合物摻量的強度試驗、彈性模量試驗；設計了與模網混凝土實際結構和情況相接近的新老砂漿粘結強度試驗、砂漿與苯板的粘結試驗以及混凝土環中的砂漿收縮試驗；進行了不同強度、不同聚合物摻量下的砂漿干縮變形試驗、溫度變形試驗，以及不同結構形式的鋼網自身溫度變形試驗和配有鋼網的砂漿溫度變形試驗。
  10. The homopolymer white emulsion, which is a emulsified adhesive, is the metastable state of polymer particles after dispersing in water. it has stable adhesion, high adhesive strength, strong initial adherence, and quick drying speed. the emulsion is easy to dilute and hard to burn

    均聚白乳膠，系水乳型粘合劑，是聚合物微粒分散於水中的亞穩定體系，具有粘接性能好粘接強度高，初粘力大快乾無毒無異味無溶劑可稀釋不易燃等特點。
  11. Lactide were investigated. the key factors affecting the polymer intrinsic viscosity were found to be monomer recrystallization times, stannous octoate concentration and polymerization time. the thermal stabilizing agent did not significantly affect the polymer molecular weight. the polymer with a viscosity average molecular weight beyond 200000 was fairly reproducible by optimizing the polymerization conditions. it was found that poly

    單體重結晶次數辛酸亞錫濃度聚合時間等條件均是影響聚合物特性粘數的重要因素。熱穩定劑對聚丙交酯的分子量幾乎沒有影響。優化聚合條件可以獲得粘均分子量大於200000的聚丙交酯材料，聚合結果具有良好的重復性。
  12. In this paper, interpenetrating polymer networks ( ipn ) based on polysiloxane ( pdms ) and poly ( methyl acrylate ) ( pma ) were prepared by using ma monomer and two types of pdms, which viscosities were 3300pa s and 7000pa s respectively. pdms was crosslmked by tetraethyl orthosilicate

    本論文制備了聚二甲基硅氧烷與聚丙烯酸甲酯的序列半互穿聚合物網路，其中聚硅氧烷為交聯結構，採用粘度分別為3300pa ? s和7000pa ? s兩個品種，聚丙烯酸甲酯為線性聚合物。
  13. Viscosity should not be below 45 sec / qt. maintain with xcd rather than with bentonite. monitor hole cleaning at shakers and adjust low end rheology as required

    要使鉆井液粘度不低於每誇脫45秒，就要用生物聚合物來維護，而不用膨潤土。通過振動篩觀察井眼是否干凈，按要求把最終的流變性調低些。
  14. Afm - based single molecule force spectroscopy and optical tweezers can be used to study the molecule - level mechanical problems of polymer materials, which include the strength and elastic properties of single polymer chain, force - induced conformation transition of polymer chain, interaction among polymer molecules, adsorption strength and conformation of polymer chain on solid substrates, nanometer - scale viscoelasticity measurement and nano - tribology of polymer surfaces

    摘要基於原子力顯微技術的單分子力譜法和光鉗法可用於研究聚合物材料分子層次上存在的力學問題，包括聚合物分子鏈的強度、彈性性質及外力作用下的構象轉變、分子間相互作用、聚合物分子的界面吸附以及聚合物表面的納米粘彈性和納米摩擦學等問題。
  15. Methods of testing plastics - rheological properties - determination of viscosity number of methyl methacrylate polymers

    塑料試驗方法.第7部分:流變性能.試驗方法732f :異丁烯酸甲酯聚合物粘度值測定
  16. In this thesis, the sls molding properties of some metal - base composite powders composed of metal powder mixed by several regularly used polymers " powder were studied, on the basis of which, a new sls composite material made by 316 stainless steel powder mixed by epoxy powder was developed and produced. the molding technics and adherent mechanism of the material in sls process was analyzed and studied, and the high temperature sintering technics of the green parts of the material was discussed as well

    本文主要針對快速成型的sls方法，研究比較了幾種常用的聚合物粉末添加到金屬粉末中所構成的金屬基復合粉末的成型性，並且研製開發了316不銹鋼粉末與環氧樹脂粉末共混復合粉末作為成型材料，對其sls過程的成型工藝、聚合物粘接機理以及型坯的高溫燒結工藝進行了研究論述，並進一步對型坯的高溫燒結過程、燒結中的收縮變形和燒結后的強度作了分析研究。
  17. Products and systems for the protection and repair of concrete structures - granulometry analysis - test method for fillers for polymer bonding agents

    混凝土結構的防護和修整用產品和系統.粒度分析.聚合物粘合劑用填料的試驗方法
  18. Products and systems for the protection and repair of concrete structures. granulometry analysis. part 2 : test method for fillers for polymer bonding agents

    混凝土結構的保護和修復產品和系統.粒度分析.第2部分:聚合物粘結劑填充試驗方法
  19. As new kinds of non - linear polymers, dendritic polymers have formed a promising kind of functional materials and have been successively used in various applications due to their characteristics including low viscosity, better solubility in conventional solvents, and nano - dimension of single molecule

    摘要樹形聚合物高度支化，與線形結構的聚合物相比具有較低的粘度及良好的溶解性，而且其單分子尺寸通常在納米尺度，在多方面具有廣闊的應用前景。
  20. The result shows that aerobic produced water, increasing polymer concentration and using high molecular weight polymer can increase the viscosity of polymer solution with produced water

    結果表明，污水暴氧、提高聚合物濃度及採用超高分子聚合物，可有效提高污水聚合物溶液的粘度，是保證污水注聚的有效手段。
分享友人
分享到 Line

分享到臉書