能值產出率 的英文怎麼說

中文拼音 [néngzhíchǎnchūlǜ]
能值產出率 英文
eyr
  • 能 : 能名詞（姓氏） a surname
  • 產 : Ⅰ動詞1 （人或動物的幼體從母體中分離出來） give birth to; be delivered of; breed 2 （創造財富; 生...
  • 率 : 率名詞（比值） rate; ratio; proportion
  1. After the bottleneck in the original ethene production plant is analyzed, the revamp design plan for srt - iii cracking furnace is proposed. the measuring results after revampment show that the thermal efficiency and ethene recovery ratio are increased compared with the design data ; the production capacity of ethene cracking furnace is enhanced, and energy consumption is reducted

    通過分析原乙烯裝置生產存在的「瓶頸」 ，提出了srt -型裂解爐改造的設計方案，並對改造後效果進行測量，熱效率和乙烯收率均比設計值有所提高，乙烯裂解爐的生產能力提高了，能耗降低了。
  2. Government ' s monopoly of capital market also leaded to the " shell " value of listed company which is irrelative to the company ' s invest value, which made the higher general price in the market. in addition to, the structure of investors which is consisting of many individual investors and few institution investors lets it easy to manipulate the stock market for the institution investors. according to the origins of the systematic risk, it is necessary to improve the market mechanism and market efficiency to eliminate the system root of the risk to decrease the risks

    突出地表現在：資本市場服務于國企轉制，造成上市公司股權結構存在缺陷，致使公司治理失效，上市公司缺乏持續發展的能力，公司經營風險轉化為市場的系統性風險；政府對資本市場準入的行政性壟斷，形成上市公司「殼」價值，虛高股票市場價格，引發系統性風險；金融市場分割，特別是貨幣市場資金缺乏進入資本市場的正常渠道，利率市場化水平低，影響金融資產定價，導致違規融資盛行，加大了市場風險；而由於市場監管不到位，以散戶為主的投資主體結構，則易導致機構大戶利用內幕信息操縱股價，機構投資者的發展不僅沒有成為穩定市場的力量，反而成為操縱市場的主力，加劇了市場波動。
  3. The important meaning in which this direction studied has lain in establishing the connection between the material science of concrete and civil engineering, analyse the strength in terms of material microcosmic or the mesoscopic, have important meaning to understanding, know the essential law of the strength of concrete. this text divides six chapters altogether. chapter one reviewed the pore structure in nowadays domestic and international research current situation, including the concrete examines research, research of the pore structure model and the research current situations of pore structure and strength relation of the pore method, have introduced some most important achievements of structure research of pore ; chapter two narrated much yardstick of the material mesoscopic structure of concrete and principle of examining pore technology of material of concrete, and the commonly used sign parameter in discussedding the pore and material pore of quito of cement and analyse, have explained that the influence factor of mip to the result of study of pore, has pointed out the limitation in mip in the pore structure ; analyse porosity and strength relation development course of model emphatically, and has carried on comparative analysis to the existing model, has pointed out the weak point of the original model ; on the basis of " ing integrate synthetically ", propose concrete pore structure compound body model and pore physical model of systemlex body ; chapter five carried on the corresponding test data to compares to the model parameter appearing in model of chapter four with and analyses, have received k value of the characteristic of strength of matrices of reflecting according to the method to return to analysis, and calculate the influence produced on the strength of concrete in revision that can probed into the content of cement, elastic mould and surface energy, exactness of the inspection model ; chapter six is the conclusion, according to studying the survey this text to some research conclusions of the pore structure and making corresponding prospect to the structure development of pore

    第一章回顧了孔結構在當今國內外的研究現狀，包括混凝土測孔方法的研究、孔結構模型的研究及孔結構與強度關系的研究現狀，介紹了孔結構研究方面的一些最重要的成果；第二章敘述了混凝土材料細觀結構的多尺度性及混凝土材料測孔技術的原理，並討論了水泥基多孔材料孔隙分析中常用的表徵參數，也說明了壓汞法測孔對研究結果的影響因素，指出了壓汞法在孔結構研究中的局限性；第三章是著重分析了孔隙率與強度關系模型的發展歷程，並對已有的模型進行了比較分析，指出了原有模型的不足之處；第四章在「綜合集成」的基礎上，提出了混凝土孔結構復合體模型和孔系統的物理模型，並模擬了該模型下由各單體並聯形成的復合體的斷裂過程，最後根據所建模型編制了相應的計算程序，可根據輸入的孔徑分佈與水泥含量等參數，實現混凝土理論強度的計算；第五章對第四章模型中出現的模型參數進行了相應的試驗數據對比分析，根據回歸分析的方法得到了反映基體強度特徵的k值，並從理論上探討了水泥含量、彈性模量和表面能的修正對混凝土強度計算產生的影響，檢驗模型的正確性；第六章是結論與展望，根據研究綜述了本文對孔結構的一些研究結論並對孔結構發展作了相應的展望。
  4. Not only motivate the talented person as well as reduce the rate of brain drain, but also make the enterprise avoid the overage cost on human being. make the employee of the enterprise could share in their work production reasonable, meantime not to the extent of made the enterprise less surplus to impact its long - term development these subject all need the enterprise to contain a fair remuneration system. the good remuneration system can draw on, retain the elitist, but the unmerited remuneration system would then bring crisis, moreover to impact the normal business of the enterprise

    人才為企業的生產經營活動作出貢獻，企業根據其能力及業績貢獻來付給人才報酬，但是如何界定人才應得的報酬以及人才的勞動力市場價值，並實現企業人力報酬的內部公平與外部公平，既要充分調動人才的工作積極性，降低人才流動率，又要使企業不至於承擔過多的人力成本；使企業的員工能合理分享其工作的成果? ?企業的利潤，同時又不至於使企業因為分享利潤過多自身內容提要粵， ， ，巴粵巴里巴里巴里日口口口盈餘過少而影響企業的長遠發展。
  5. ( 2 ) the maximum of input - output ratio is strikingly promoted by the level of technical developing and unrestraint of resourses. and at the same time, it ’ s positively and distinctly influenced by the factors of natural resourses amount, techological support, govenment policies, labor supply, public foundation, intermediary service, maket overlay ( from high influence to low )

    （ 2 ）集群的資金產出率的峰值（最大值）受到集群的自然資源非限制性、技術發展水平的影響顯著;同時也受到外部環境因素的明顯影響，由影響程度從高到低排序如下:自然資源、技術支撐、政府政策、勞動力供給、公共基礎、中介服務、市場輻射的提供能力。
  6. The function of science and technology progress in economic development is discussed from the economic and technique. this thesis divides four contents. chapter 1 analyzies cobb - dorglas production function and so1ow " worth method in remaining " theories, and introduces this thesis ’ main content. measure to calculate chemical fibre business science and technology progress contribution rate with the " worth method in remaining ", the chemical fibre business annual report data for measure to calculate basic data, calculation method adopt excel, using this method to jilin chemical fibre business in the 1995 - 2005 years science and technology progress the contribution rate proceeds to measure and analyze

    本文從技術和經濟相互關系角度論述了科技進步在經濟發展中的作用，著重分析了柯布一道格拉斯生產函數及索洛（ so1ow ） 「余值法」在我國化纖企業中的適用性。針對化纖企業多年以來受產能增加和需求不足的影響而產生的效益滑坡問題，利用企業上市公司年報數據，使用excel表進行數據計算，研究歸納出一種簡捷、科學的測算化纖企業經濟增長中科技進步貢獻率的模型方法。
  7. Aiming at such problems in combustion system of homemade middle and miniature boiler, as a complex system with the character of dead zone, time variation, serious non - linearity, large time delay, coupling and a lot of disturbance, this paper presents a new set of optimal control resources. by using well - matched control method on system, stable automatic running is realized. having the serious divulgence coals difference a lot from each other in character, instability of chemistry, value of lowest emission of heat, home - made boiler controller is not at all ideal. instead of traditional model that controls the ratio based on proportional control or with the correct signal of the amount of oxygen, this paper, combined with intellect control theory - - fuzzy control and self - optimizing concept, propounded a kind of fuzzy self - optimizing controller to be used in air supplying system of the boiler, and expatiates on the idea of dividing the control process into two parts, dynamic and static to realize, thus meets the demand of homemade boiler economic running

    本設計針對國產中、小型電站鍋爐燃燒系統參數時變、嚴重非線性、干擾因素復雜、耦合嚴重、模型不易確定的特點，提出多變量協調控制方案，解決了系統可控性差，難以實現穩定自動運行的問題；在此基礎上，改變以往以煙氣含氧量控制送風的傳統模式，針對國產電站鍋爐設備主體及一、二次送風迴路泄露嚴重，煤種混雜、成分不穩定、燃燒發熱值低、燃燒效率不高等問題，應用智能控制理論中的模糊控制技術，結合自尋最優控制的思想，設計了一種模糊自尋優控制器，應用在電站鍋爐送風控制系統上，並闡述了動靜態兩種實現途徑，通過在線優化風煤配比，實現最佳經濟燃燒，切實保障了鍋爐的經濟運行。
  8. Abstract : incompatible element nh11 and hybrid stress element 18 were employed to analyze rock burst occurring in coal face 9108 of sanhejian coal mine. compared with the results from ansys, the two optimized fems can execute more accurate numerical simulation in the research of rock burst as well as other rock problems and lessen the errors from inaedquately meshing in huge calculations due to the limitation of labor and computer time. in addition, the criterion of averaged generalized stress rate was proposed and used to determine the site and moment of rock burst. the given conclusion is in accordance with the face of coal face 9108 very well

    文摘:利用優化非協調元和雜交元分析了三河尖礦沖擊礦壓，並與ansys程序的計算結果進行了比較.認為優化有限元在沖擊礦壓乃至巖石材料的數值模擬中能給出更為精確的結果，也可減小大型計算中由於人力、機時所限粗分網格產生的誤差.分析中，採用了廣義平均應力率準則來判斷沖擊點位置和沖擊時刻，所得結論與實際情況吻合
  9. In the second section, three ( 2 co2 ) scenarios only considering climate change alone ( c scenario ) were generated first, using outputs of the giss, gfdl and ukmo gcms, combined with the baseline. then, climate change scenarios including change in climate variability ( c + v scenario ) were produced, based on 3 hypotheses and the weather generator ( wgen ) in dssat. finally, the ceres - wheat model was run under both the ( c + v ) scenarios and the baseline, and the combined effects of climate change and its variability with doubled co2 on whiter wheat production in the studied region were assessed, based on the results simulated comparison

    在上述第2部分，首先利用baseline和國際上通用的3種大氣環流模型（ gcms ）即giss 、 gfdl和ukmo的有關網格點值，生成了研究區域3種不考慮氣候變率變化的（ 2 co _ 2 ）氣候變化情景（以下簡稱c情景） ；然後，提出了未來氣候變率可能變化的3種假設，並應用dssat （農業技術轉化決策支持系統）中的wgen （隨機天氣發生器） ，分別生成了研究區域（ 2 co _ 2 ）條件下兼顧氣候及其變率的氣候變化情景（以下簡稱c + v情景） ；再后，在上述（ c + v ）情景下分別運行ceres - wheat （作物-環境資源綜合系統-小麥） ，還考慮了大氣co _ 2濃度的直接影響，並與baseline條件下ceres - wheat的模擬值進行比較，在此基礎上評價了（ 2 co _ 2 ）條件下氣候及其變率變化對研究區域冬小麥生產的影響。
  10. One is to study the relationship between the share - holding structures of senior supervisor, stock structure etc, and the finance performance of the corporate ; the other is to study the relationship between correlative factors of the corporate governance. in this article, based on the analysis of the relationship between corporate governance and financing performance, the author divide performance into two aspects : roe and tobin ' s q ratio, tries to establish the correlation and regression analysis mathematics model of corporate value and developing ability of the corporate, using statistical software spss10. 0, carry through the correlation and regression analysis, then analyzes the model to study the relationship between corporate governance, corporate value and developing ability of the corporate. this is a beneficial experiment to the research of the relationship between corporate governance and performance

    本文試圖在分析公司治理結構各方面與公司經營財務業績相關關系的基礎上，將公司績效分解為凈資產收益率代表的公司價值和托賓q值代表的公司價值成長能力兩個指標，分別建立公司價值與公司治理結構各影響因素以及公司價值成長能力與公司治理結構各影響因素關系的多元線性數學模型，利用spss10 . 0統計軟體，對之進行多元線性回歸分析，考察它們之間的相關性和回歸系數，並通過擬和出的回歸方程考察公司短期與長期發展能力與公司治理結構的關系，是對公司治理結構與公司績效關系進行研究的一次有益嘗試。
  11. First each of the eight factors, i. e., per capita water resource available, per capita water requirement quantity, environmental water use rate, utilization rate of water resource, industrial water requirement quantity per 10, 000 industrial product value, water requirement module, regional irrigation rate was analyzed. then the water resource capacity in hejin city was evaluated by applying the fuzzy comprehensive estimation

    選取了人均水資源可利用量，人均供水量，生態需水率，水資源利用率，萬元工業產值需水量，需水模數，生活需水定額，耕地灌溉率等8個評價因素，利用模糊綜合評判模型對其水資源承載能力進行了評價研究，並提出了河津市水資源安全對策。
  12. Experimental study on that 532nm 、 1064nm 、 1319nm 5khz frequency pw laser irradiate the ccd respectively. with the data of experiment, the thresholds of laser power density that induce ccd saturation, crosstalk and irreparability damage were calculated. the phenomenon that 532nm 5khz laser can induce part of ccd functional damage but absolutely damage was found

    根據實驗數據計算了532nm 、 1064nm高重頻脈沖激光使ccd出現飽和、串擾以及被破壞的功率密度閾值;實驗發現一定功率密度的高重頻532nm脈沖激光可以使ccd局部損傷而不致整體破壞;實驗進一步證實了1319nm激光不能使可見光ccd產生響應。
  13. At the initial stage of planar technique, b was employed as ideal diffusion impurity in base - region of npn si planar devices because of the match of its solid - solubility and diffusion coefficient in si with those of p in emission - region, and the good shield effect of sio2 film to b. but because of the relatively large solubility ( 5 1020 / cm3 at 1000 ) and the small diffusion coefficient, the linear slowly - changed distribution of acceptor b in pn junction can not be formed, which could not cater to the requirement of high - reversal - voltage devics. thereafter b - a1 paste - layer diffusion technology and close - tube ga - diffusion technology had been developed, while the former can lead to relatively large the base - region deviation and abruptly varied region in si, which caused severe decentralization of current amplification parameter, bad thermal stability and high tr ; the latter needed the relatively difficult pack technique, with poor repeatability, high rejection ratio, and poor diffusion quality and productio n efficiency

    在平面工藝初期，由於b在硅中的固溶度、擴散系數與n型發射區的磷相匹配， sio _ 2對其又有良好的掩蔽作用，早被選為npn硅平面器件的理想基區擴散源，但b在硅中的固溶度大（ 1000時達到5 10 ~ （ 20 ） ，擴散系數小， b在硅中的雜質分佈不易形成pn結中雜質的線性緩變分佈，導致器件不能滿足高反壓的要求，隨之又出現了硼鋁塗層擴散工藝和閉管擴鎵工藝，前者會引起較大的基區偏差，雜質在硅內存在突變區域，導致放大系數分散嚴重，下降時間t _ f值較高，熱穩定性差；後者需要難度較大的真空封管技術，工藝重復性差，報廢率高，在擴散質量、生產效率諸方面均不能令人滿意。
  14. The analyses given in this paper to quasi - three - level for 946 nm laser are complete. the relation between 946 nm laser transmission and optimal crystal length has been derived from the rate equations describing the population inversion and the photon density in the laser cavity in the steady - state case. the minimal claims to coating have been given on the base of contrasting 946 nm transmission with 1064 nm transmission in the condition of different cavity losses and how the pump beam radius in the laser crystal and optimal crystal length affect the laser threshold and output power of 946 nm laser has been given as well

    對產生946nm譜線的準三能級結構給出了較為完整的分析，利用激光諧振腔處于穩態時的速率方程，導出了準三能級nd ： yag946nm起振時，透射損耗與最佳激光晶體長度的關系，在與1064nm透射損耗相比較的基礎上，給出了不同的腔損耗情況下的最低鍍膜要求，並且給出了激光閾值、輸出功率和最佳激光晶體長度及泵光光斑大小的關系，這為設計室溫下高效運轉的946nm激光器的提供了理論基礎，這種分析方法對研究此類低增益，準三能級或三能級激光系統輸出特性有借鑒意義。
  15. This dissertation is faced to the process of steel rolling to found network of manufacture material flow, basing on it founding guide line evaluation system of the cost of unit standard producing working procedure, guide line evaluation system of the quality cost of unit standard producing working procedure and guide line evaluation system of performance and efficiency ; and base on the cost data of all kinds of material flows, manufacture flow, flux data, manpower, energy consume, material consume, capital asserts occupied, fund occupied, and the production in working procedure, throughput of the materials in working procedures in the flow and countercurrent flow in the network of material flow of recorded in working procedure producing, using the “ whole closed down lane ” model to describe network of manufacture material flow of steel rolling, found the cost analyzing model system of the network faced to producing process. make the cost increasing of the producing by abnormity material flow in working procedure, and even the cost increasing of the producing procedure as the cost of the management behavior of working procedure fallen under cost evaluation guideline in responsible working procedure, so as to ration measure the factors fast correlated with management behavior by measuring the cost

    在企業管理信息化輔助工具所建立的數據平臺基礎上，建立了以基準物流圖模型為基礎的軋鋼生產主流程物流網路拓撲圖，根據圖論的理論求解最大流量和最小費用;計算每個生產節點的加工成本，分離質量成本，克服了單純財務數據進行成本核算所帶來的缺陷;建立了軋鋼生產主流程工序含鐵物料吞吐能力基準圖模型，並根據此模型建立了軋鋼生產主流程工序激勵物流協調性和匹配性、工序響應物流協調性和匹配性分析的過程能力指數計算方法;通過引入決策單元綜合投入與綜合產出效率最優原則的模型和基於投入不變、分析產出是否有效或基於產出不變、分析投入是否有效的模型，實現了對多個績效指標在不同績效值集合之間的相對比較，並可根據投入產出效率準則、或者投入（產出）有效性準則進行排序。
  16. With the flourishing development of the microelectric technique and technology of computer and appearance of the high - efficient number value computational tool represented by matlab. get the fast development, thus the problem that solve the human physiology organ and ca n ' t be discerned in recognition technology of the picture

    隨著微電子技術及計算機技術的蓬勃發展和以matlab為代表的高效數值計算工具的出現，圖像識別技術得到快速發展，從而解決人類生理器官不能識別的問題，部分代替了人的腦力勞動並提高生產效率。
  17. From the angel of information transferring, because the inefficiency of security market made the way of company ' s financing ca n ' t transfer information of its value - added to investors, the controlling shareholder choose equity financing to improve their own interests and the value of company was impaired

    在信息傳遞功能方面，證券市場的信息傳遞低效率使融資方式不反映公司價值狀況，控股股東出於自身利益而偏好股權融資，並對公司價值產生負面影響。
  18. The emergy of industrial auxiliary energy increased but its percent in total input was less than 10 percent. the input of manpower emergy was above 60 percent of the total emergy input, and the non industrial emergy input was above 90 percent of the total emergy input

    但是，初級生產依然是處于低投入的傳統生產階段。工業輔助能值的投入雖然有所增加但占能值總投入的比例不到10 ，系統的凈能值產出率低下。
  19. According to the following design theory : the dsp calculates in real time and produces three phases spwm waves to control the on or off of the 6 igbts in ipm respectively. ipm then inverts the commutated single phase direct current ( insulated gate bipolar transistor ) into three phases alternating current. when modulated signals of spwm are changed, the on - off time of switches also changes, so as to the voltage and frequency of output signals

    本文提出了一種基於dsp （數字信號處理器tms320f240 ）的通用的三相間接變頻電源系統，利用分段同步調製法和混合查表法，實時計算不同頻率下的采樣周期、電壓幅值、輸出脈寬，產生雙極性spwm波形，經驅動放大後用于ipm （ intelligentpowermodule ）中的絕緣柵雙極型晶體管柵級驅動，以控制電源的輸出電壓和頻率，實現變頻電源的智能數字控制。
  20. After using three methods of estimating equilibrium of money supply, we can draw these conclusions : ( 1 ) the money gap presented business cycle character from 1978 to 2004. ( 2 ) from 1994, the fluctuated extent of money gap decreased, which means the efficiency of monetary policy raised steadily. ( 3 ) the money gap has the forecast function of extreme in business cycle

    本文採用均衡產出決定法、周期趨勢消除法和貨幣供給增長率推演算法分別測算1978 - 2004年我國的貨幣缺口，結果表明： （ 1 ）在過去的27年中，貨幣缺口變化呈現出周期性特徵； （ 2 ） 1994年以後貨幣缺口的波動幅度變窄，表明貨幣政策調控的效果逐步提高； （ 3 ）貨幣缺口對經濟周期的峰值具有預警功能。
分享友人
分享到 Line

分享到臉書