腐蝕損失 的英文怎麼說

中文拼音 [fǔshísǔnshī]
腐蝕損失 英文
corrosion losser
  • 腐 : Ⅰ名詞（豆腐） bean curdⅡ動詞（腐爛; 變壞） decay Ⅲ形容詞（腐爛） rotten; corroded; putrid
  • 蝕 : Ⅰ動詞1. （損失; 虧耗） lose 2. （腐蝕） erode; corrode Ⅱ名詞（天體現象） eclipse
  • 損 : Ⅰ動詞1 （減少） decrease; lose 2 （損害） harm; damage 3 [方言] （用尖刻的話挖苦人） speak sarcas...
  • 腐蝕 : 1 （通過化學作用使物體逐漸消損破壞） corrode; corrosion; corroding; deep etch; diabrosis; rot; ea...
  • 損失 : 1. （失去） lose 2. （失去的東西） loss; wastage
  1. Due to slope cable bears barely alternative load longtime in nature environment, it is easy to corrosion and wreck. seriously, the bridge is possibility to collapse in strictness air empoison, water pollution, seashore and ocean surroundings. therefore, to study cable ’ s corrosion widely and to inhibit corrosion process are very important for increase endurance and safety of bridge construction

    由於斜拉索長期承受交變載荷並暴露于自然環境中，特別是大氣污染嚴重地區、水污染嚴重地區、海濱及海洋環境，極易發生腐蝕破壞，嚴重者還會因坍塌而造成生命及財產的巨大損失，因此，全面研究橋梁拉索的腐蝕，阻斷腐蝕的成因，對提高橋梁結構的耐久性與安全性具有重要意義。
  2. Yeomans shall not be liable for any damage caused by abrasive materials, chemicals, scale deposits, corrosion, lightning, improper electrical supply, mishandling, or other similar conditions

    對于有下列因素造成的損失：研磨材料，化學物質，水垢沉澱，腐蝕物質，閃電，電源供應故障，違反操作規程的操作，或其它類似情況，美國約曼公司將不承擔任何責任。
  3. Corrosion losses occurred in the statue hall of chengdu museum for the ancestral temple of marquis wu

    成都武侯祠博物館塑像館腐蝕損失報告
  4. Throughout the world, concrete infrastructure reinforced with steel is waging a losing battle against corrosion

    整個世界正在進行著鋼筋混凝土基礎設施腐蝕損失的斗爭。
  5. The major reasons for impeller failure were interactive action of coarse microstructure and oxygen corrosion as well as erosion - corrosion

    結果表明，葉輪失效的主要原因是材料組織粗大以及氧腐蝕和沖蝕磨損交互作用的結果。
  6. The boundary of ferrite has been clarified and fined by adding re into crsomo. the intergranular corrosion induced by solution chromium decreasing can be restrained for nb, v, ti combing carbon in the steel. the wear resistance of stainless steel can be increased for the precipitation of microalloyed carbides

    其中，稀土能夠凈化鐵索體晶界，並起到變質劑的作用，細化鐵素體晶粒，改善不銹鋼的韌性；鈮、釩、鈦能夠與鋼中的碳結合，減少固溶鉻的損失，從而避免晶間腐蝕，同時細小微合金碳化物的沉澱析出可提高不銹鋼的耐磨性。
  7. The water cooling system of water - cooling conditiong unit was discussed requiring attention to design, focusing on the analysis of the cooling water circulation materials used, corrosion methods and algae mud treatment methods to improve equipment reliability and life expectancy, reducing erosion caused economic losses

    摘要論述了海水水冷櫃機冷卻水系統設計中需要注意的海水管路設計，著重分析了冷卻海水管路的材料選取，防腐方法，以及海藻泥沙處理的方法，以期提高設備的可靠性和壽命，減少腐蝕所造成的經濟損失。
  8. Abstract : the causes for low efficiency of the heater in no. 2 crude unit of jpc refinery are described and analyzed including water leaking of steam soot blower, dew point corrosion caused by steam, soot deposits in convection chamber owning to poor soot blowing, high flue gas temperature, no heat recovery of flue gas, and poor performance of insulation lining, etc. by using sonic soot removing system, flue gas recovery system, spray coating of fiber and rock wool, as well as adjustment of flow scheme accordingly in the technical revamping. the dew point corrosion is completely eliminated, the insulation performance is improved, the heat loss is reduced by 1. 25 %, the flue gas temperature is reduced to about 170, and the heater efficiency is increased from 83 % to more than 90 %

    文摘:分析了金陵石油化工公司煉油廠二套常減壓裝置加熱爐存在的因蒸汽吹灰器漏水，蒸汽引起露點腐蝕及吹灰效果差造成對流室積灰，排煙溫度高，煙氣熱量未回收利用以及爐子保溫襯里效果差等問題，提出採用聲波除灰系統、煙氣回收系統、纖維噴塗和巖棉噴塗及相應的流程調整等改造措施.測定結果表明，本次技術改造解決了因蒸汽吹灰器漏水所造成的露點腐蝕問題，提高了保溫效果，減少散熱損失1 . 25 % ，排煙溫度降至170左右，裝置的爐效率由83 %左右提高到90 %以上
  9. The causes for low efficiency of the heater in no. 2 crude unit of jpc refinery are described and analyzed including water leaking of steam soot blower, dew point corrosion caused by steam, soot deposits in convection chamber owning to poor soot blowing, high flue gas temperature, no heat recovery of flue gas, and poor performance of insulation lining, etc. by using sonic soot removing system, flue gas recovery system, spray coating of fiber and rock wool, as well as adjustment of flow scheme accordingly in the technical revamping. the dew point corrosion is completely eliminated, the insulation performance is improved, the heat loss is reduced by 1. 25 %, the flue gas temperature is reduced to about 170, and the heater efficiency is increased from 83 % to more than 90 %

    分析了金陵石油化工公司煉油廠二套常減壓裝置加熱爐存在的因蒸汽吹灰器漏水，蒸汽引起露點腐蝕及吹灰效果差造成對流室積灰，排煙溫度高，煙氣熱量未回收利用以及爐子保溫襯里效果差等問題，提出採用聲波除灰系統、煙氣回收系統、纖維噴塗和巖棉噴塗及相應的流程調整等改造措施.測定結果表明，本次技術改造解決了因蒸汽吹灰器漏水所造成的露點腐蝕問題，提高了保溫效果，減少散熱損失1 . 25 % ，排煙溫度降至170左右，裝置的爐效率由83 %左右提高到90 %以上
  10. The heat pipe exchanger has the advantages of compact, controlling erode of acid dew point, high efficiency, low pressure drop loss and reliability, so they are used widely in heat energy utilization and waste heat recovery. it is also helpful to recover the waste heat, save the raw materials and reduce the production costs. economic benefit from application is obvious

    以熱管為傳熱元件的熱管換熱器具有下列特點：傳熱效率高，壓力損失小，工作可靠，結構緊湊，有利於控制露點腐蝕等，這些獨特的優點是它在解決能源問題，如：利用熱能、節約原料、降低成本等方面，特別是在工業余熱利用中發揮了越來越多重要的作用。
  11. Dental cobalt - chromium alloy casting as cobalt - chromium alloy, my company ' s current production of cobalt chromium alloy to form a rigid cylindrical, rectangular soft for two, mainly for dental patients with tooth loss or defect repair, organize and dense, strong corrosion resistance, biocompatibility, and good liquidity, easy casting, casting and polishing a hard flexible, white aesthetic characteristics of the dental practitioner ' s the ideal dental restoration materials

    牙科用鈷鉻鑄造合金簡稱鈷鉻合金，我公司目前生產的鈷鉻合金外形有硬質為圓柱形、軟質為長方形兩種，主要用於牙病患者牙齒的缺失或者缺損的修復，具有組織緻密、耐腐蝕性強、生物相容性好、流動性好、易於鑄造，鑄件拋光后具有質地堅硬有彈性、白亮美觀的特點，是牙科醫生獲得牙齒修復體的理想材料。
  12. Firstly, this paper discussed failure mechanisms, failure reasons and precautions of explosion, corrosion, abrasion, deformation and leakage etc by studying the rationales of internal and overseas failure analysis for pressure vessels. secondly, each fault tree of failure analysis was built and the knowledge base of failure analysis for pressure vessels was made by combining production rule with framework in the end

    本文借鑒國內外的壓力容器失效分析的基本原理，研究了破裂或爆破失效、腐蝕失效、磨損失效、變形失效、泄漏失效等失效機理、失效原因及預防處理措施，進而建立其各自相應的失效分析故障樹，最後通過產生式系統與框架系統相結合的知識表示方法建立了壓力容器失效分析知識庫。
  13. Since it has the advantage of no moving components, impulse signal output, strong medium adaptability, high measurement accuracy, wide measurement range, low - pressure drop, no zero drift and easy to maintenance, it is wide accepted that the vortex type fluid oscillatory flowmeter is ideal flowmeter in the measurement of gas, liquid, steam and mix / corrosive fluid

    這類的流量計兼有無運動部件，脈沖數字輸出，計量不受被測流體性質影響，測量準確度較高，量程比寬，無零點漂移，壓力損失小，便於安裝維護等優點，是測量氣體，液體，蒸汽，混合型和腐蝕性流體的理想的流量計。
  14. Fire hazard testing - part 5 - 3 : corrosion damage effects of fire effluent ; leakage - current and metal - loss test method

    著火危險試驗.第5 - 3部分:燃燒廢氣的腐蝕破壞效應.漏泄電流和金屬損失試驗方法
  15. Secondly, been generalized the failure data of electrical connectors from working and testing environment, electric contact failure, insulation failure, mechanical connection failure and other failure are four mainly failure modes of connectors, moreover, built the faulty - tree to analyze their reliability level. however, contact fault failure was the most prevalent mode of electrical connectors. under natural working and reserving conditions, the contact stress decreasing, fretting and surface film growing are mainly reasons to make electrical connector failure

    其次，通過對現場、試驗場電連接器的失效情況進行統計和分析，總結出電連接器的四種主要失效模式：電接觸失效、絕緣失效、機械連接失效和其他失效，並對電連接器進行了故障樹分析，指出電接觸失效是電連接器失效的主要形式，而在正常的工作條件下，造成電接觸失效，即決定電連接器工作壽命的主要原因是氧化膜層的生長、接觸對磨損以及磨損腐蝕物的堆積，而影響氧化膜層的生長、接觸對磨損以及磨損腐蝕物堆積的主要因素是環境振動和溫度應力，為電連接器進行失效機理分析奠定了基礎。
  16. There are a lot of advantages when inner trachea applied in air pre - heater, such as the improvement of the temperature of pipe, the low consumption of metal, except for the increment of flow resistance. according to many related papers, it is more proper inner trachea with the structure of short distant between two whorls and shallow depth of whorl. it can enhance heat transfer with smaller flow loss

    內螺紋管是一種異形管，和光管相比，管內側的換熱系數大大增強了，應用於空氣預熱器可以起到提高總傳熱系數、節約受熱面金屬消耗量的目的；同時提高了管壁溫度，能夠減輕低溫腐蝕的程度和速度；不足之處是帶來了更大的阻力損失。
  17. 1. introduction for the pre - stressed concrete bridges in offshore and cold area, due to the corrosion effect of the corrosive agents in the environment to the structures, the safety of the bridge structures will decline with the service time, and this will affect the normal use of the bridge structures in the residual service time

    第一章緒論處于沿海地區及冬季寒冷地區的預應力混凝土橋梁，由於所處環境或冬季所採用的除冰鹽中氯離子的腐蝕作剛，導致結構安全性的降低，使結構不能保證其在後續使用期內的正常使用，造成較大的經濟損失。
  18. During the long active service time, the structure maybe presents all kinds of structural damage because such reasons as tired accumulating, environment corroding and natural calamity function, etc. in order to find those damages early, nip in the bud, and lower the damage of accidents, it is great meaning full to research the technique of online damage monitoring of the long - span lattice roof structure

    結構在服役期間，由於疲勞累積、環境腐蝕及自然災害等作用，可能出現結構損壞，因此，為了能夠及時發現問題，防患於未然，把事故損失降到最低點，在結構正常使用情況下，對大跨空間網格結構進行在線損傷監測研究，就顯得極有現實意義。
  19. Wear is one of three main failures ( wear, corrosion and fatigue ). it occurs frequently and inevitably. therefore, it is a " perpetual " program to study wear and develop new wear - resistant materials continuously

    磨損是三大失效方式（磨損、腐蝕和疲勞）之一，具有經常發生和不可避免性，因此研究磨損和不斷發展新的耐磨材料是一項「不朽」的課題。
  20. Fire hazard testing - part 5 - 2 : corrosion damage effects of fire effluent ; summary and relevance of test methods

    著火危險試驗.第5 - 2部分:著火流出物對財物的腐蝕損失.試驗方法的摘要和概述
分享友人
分享到 Line

分享到臉書