膠接過程 的英文怎麼說

中文拼音 [jiāojiēguòchéng]
膠接過程 英文
bonking process
  • 膠 : Ⅰ名詞1 （某些具有黏性的物質） glue; gum 2 （橡膠） rubber 3 （姓氏） a surname Ⅱ動詞（用膠粘） st...
  • 接 : Ⅰ動詞1 （靠近;接觸） come into contact with; come close to 2 （連接; 使連接） connect; join; put ...
  • 過 : 過Ⅰ動詞[口語] （超越） go beyond the limit; undue; excessiveⅡ名詞（姓氏） a surname
  • 程 : 名詞1 （規章; 法式） rule; regulation 2 （進度; 程序） order; procedure 3 （路途; 一段路） journe...
  • 過程 : process; procedure; transversion; plication; course
  1. The glass adherence craft has avoided the temperature, humidity, machinery fatigue and medium to the glue water and material influence, and then improved the sensor long - term stability in the industry ambient, in the meanwhile also avoided the sensor p - n effect phenomenon that appeared in the traditional micro machining operation manufacture process

    玻璃粘接工藝避免了溫度濕度機械疲勞和介質對膠水和材料的影響，從而提高了傳感器在工業環境中的長期穩定性能，同時也避免了傳感器在傳統微機械加工製造工藝過程中出現的p - n結效應現象。
  2. This machine is comprised of screen box, vibration source and damper, vibrating frame and screen box are connected with 4 - 12 group soft rubber damp - ers fixed up and down, and the centrifugal force is generated therein, the floating ampli - tude is controlled by the damper, by which, material realizes a process of throw and lami - nation filtration downward, and therefore reach - ing the optimized grading and screening ef - fect

    本機由篩箱.振動源及減震器三大部分組成.振動機架與篩箱連接有4 - 12組軟橡膠減震器上下固定，產生離心力，由震器控制浮動振幅，使物料有一個向下拋震和向下分層過濾的過程，從而達到最佳分級過篩的效果
  3. Secondly, this paper made some theoretic researches on its engineering classfication and applicable scope for this technology ; then combining with project example, this paper carried out scheme design for this technology, and compared some different kinds of underpinning scheme and node and structure design, and put forward the method of " reinforcce steel bar through column " to build pile cap beam, " resistant bend and shear anchored reinforce steel bar " to strengthen column consolidation effect, and the method of " steel plate hoop " to build reinforcing bar connection of the foundation beam, etc. in the process of the consturction scheme research and implement, this paper synthetically elaborated the organizaton for project construction, put forward the construction technical measure of specific aim on the artificial pile, and pile cap beam, and underground adding layer and structure stabilization, and overall structure stabilization and so on. for this project, adopt reinforcing bar concrete to brace hole wall to ensure the safety of engineering in the artificial pile construction, use flexible connection catch to make the cage hoisting easier to simplify the construction process, use the method of earthwork statified symmetrical balance in the process of underground adding layer excavation

    本文首先對于基礎托換與結構加固技術的目的和意義、國內外發展狀況進行了綜合闡述；其次對該項技術工程分類及適應范圍進行了理論上的分析研究；然後結合工程實例對該項技術進行了方案設計，對比幾種不同的托換方案和節點及構造設計，提出了「通筋穿柱法」做承臺梁， 「抗彎抗剪錨筋法」強化柱加固效果， 「鋼板箍法」做地基梁鋼筋連接點等多項技術；在施工方案的研究和實施過程中，對于工程施工組織進行綜合闡述，並就人工挖孔樁、承臺梁、地下加層及結構加固、整體結構穩定等專項施工方案提出有針對性的施工技術措施，人工挖孔樁施工採用鋼筋砼護壁確保挖孔樁的安全成型，使用柔性連接鉤進行鋼筋籠吊裝簡化施工工序；承臺梁施工採用梁主筋橫穿柱身化學膠錨固等；地下加層綜合施工技術採用土方分層對稱平衡開挖，分段挖土做筏基結構自穩等；最後對于該工程實施后的效果分析，說明該項綜合施工技術的可行性。
  4. The results of lauryl sodium sulfate - polyacrylamide gel electrophoreses ( sds - page ) of the aggregate precipitate and supernatant and the result of high - performance size - exclusion chromatography of the supernatant indicated that, by wrongly linked intermolecular disulfide bonds soluble bi - molecular and tri - molecular egg white lysozyme aggregate could be simultaneously formed except being renatured to native and active egg white lysozymes during the refolding procedure of denatured - reduced egg white lysozyme ; the aggregate precipitate could be further formed by the non - covalent bonds interaction between the soluble hi - molecular egg white lysozyme aggregates, and the soluble tri - molecular egg white lysozyme aggregate could still stay at the supernatant

    沉澱和上清液的不連續十二烷基硫酸鈉聚丙烯酰胺凝膠電泳（ sds - page ）和高效凝膠排阻層析分析結果表明，還原脲變性蛋白溶菌酶在稀釋復性過程中除了能夠復性成天然態蛋白溶菌酶分子外，還會形成可溶的蛋白溶菌酶分子二聚體和三聚體，二聚體和三聚體主要是靠分子間二硫鍵的錯配連接而成的；可溶的蛋白溶菌酶分子二聚體之間通過非共價鍵相互作用而形成集聚體沉澱，而可溶的三聚體溶菌酶分子則仍處于復性液上清液中。
  5. Pull the slip board, up distance switch to loosen, the film motor starts turn to move after receive the signal, turning to schedule length, pass the sense switch control film electrical engineering automatically stop, put the cup into the bottom slip mold, then push to go into, next circulation beginning

    拉出下模滑板，上行程開關松開，膠模電機接到信號后開始轉動，轉過預定長度，通過電眼控制膠膜電機自動停止，將膠杯放入下模滑板，再推入，下一個循環開始。
  6. In the process of preparing mullite powder, we use teos and al ( no3 ) 3 as raw materials. the powder we prepared has high purity and its grain radius is relatively small and is distributed equality. by this method, we prepared about 600 g mullite powder and it provided basis for the next experiment

    在溶膠-凝膠法制備莫來石粉末過程中，我們以正硅酸乙酯和硝酸鋁為主要原料，採用該法制得了莫來石粉末，該粉末純度很高，粒徑較小並且分佈均勻，我們按該法制得了約600g莫來石粉料，為接下來的實驗打下了基礎。
  7. By rapid thermal processing ( rtp ), high active atoms are excited while decomposing the gel precursor film, and consequently, much more contents of crystalline phase are obtained even at relatively lower temperature

    通過快速熱處理方法，在凝膠分解過程中得到的高活性離子直接形成晶相，可以在較低的溫度下形成晶相及得到相應更多的晶體含量。
  8. Abstract : some new technological measures, such as new reactors, gel method to remove silicon, direct dissolve acid to recrystallizate and direct calcine from zirconyl chloride, were used to reform zirconium dioxide production process. as a result, the materials consumption and energy consumption were reduced and the wastewater discharge was decreased. meanwhile the rubbish were recovered and utilized to prepare into a by - product as silica aerosol. the pollution prevention and control in production process were achieved

    文摘:採用新型反應器及膠凝除硅、直接酸溶重結晶、直接煅燒等技術對二氧化鋯的生產工藝進行了改革，降低了原材料消耗及能耗，減少了廢液排放量，並將回收的廢物加工成副產品白炭黑，在生產過程中防治污染。
  9. Some new technological measures, such as new reactors, gel method to remove silicon, direct dissolve acid to recrystallizate and direct calcine from zirconyl chloride, were used to reform zirconium dioxide production process. as a result, the materials consumption and energy consumption were reduced and the wastewater discharge was decreased. meanwhile the rubbish were recovered and utilized to prepare into a by - product as silica aerosol. the pollution prevention and control in production process were achieved

    採用新型反應器及膠凝除硅、直接酸溶重結晶、直接煅燒等技術對二氧化鋯的生產工藝進行了改革，降低了原材料消耗及能耗，減少了廢液排放量，並將回收的廢物加工成副產品白炭黑，在生產過程中防治污染。
  10. The process of winding can be separated from the measure to the technological parameters, the variety of the winding tension of the fiber and the temperature of the gum trough directly affects the whole performance of the winding goods

    在纏繞加工過程中，離不開對加工工藝參數的監測，纏繞時纖維張力和膠槽溫度的變化直接影響纏繞製品的整體性能。
  11. Under the conditions of operation pressure about 0. 5mpa and feed temperature 25 c, the rejection performance of nacl feed solution ( 500ppm ), is about 35 %, while the flux is about 45ml cm - 2 h - 1. the pa membranes were prepared by interfacial polymerization, usingl, 3, 5 - benzenetricarbonyltrichlori2, 4 - dichloroterephthalaldehyd e, 1, 3 - phenylenediamine as monomers

    研究結果表明， 5102 / a12o :無機復合超濾膜的研製原料正硅酸乙酷、乙醇、水、 n ， n一二甲基甲酸胺（ dcca ）和hno3之間的配比、塗膜過程、熱處理溫度等直接影響著溶膠的質量和膜的性能。
  12. Aim at the shortage in actual application that the frp pipe flange joint with the steel pipe and steel parts, in consideration of the special advantage of the adhesive boned joint, put forward the method that the steel flange adhesive boned steel pipe or steel part after the steel flange instead the frp pipe flange, or the frp pipe adhesive boned direct with the steel and steel part, it can reduce the stress concentration problem that cause from the different of the descend speed and the hot bulge or freeze coefficient in the applied process. thus reduce the damage number and the maintenance costs of the piping, so this method can have the greatly actual application value

    針對玻璃鋼管道與鋼管及鋼管件之間法蘭連接方式在實際應用中的不足之處，考慮到膠接連接的獨特優勢，提出如用鋼法蘭代替玻璃鋼法蘭與玻璃鋼管道膠接后，再與配套的鋼管及鋼管件進行連接，或玻璃鋼管道直接與鋼管（件）進行膠接連接，則可減少玻璃鋼管道在應用過程中與鋼管（件）連接后因沉降速度及凍脹系數均不同而產生的應力集中問題，減少管道的損壞次數及維護成本，有很大的實際應用價值。
  13. Then, we utilized the additives of - al _ 2o _ 3 powder seeding, alumina sol seeding, tio _ 2 - sol, ammonium nitrate, and high - energy ball milling on the precursors to investigate these factors " influences on the transformation temperature, the microstructure of as - received nano - sized - al _ 2o _ 3 powders and transformation sequences

    接著，就分別研究在前驅體中加入或摻雜q - al _ 2o _ 3粉體籽晶、氧化鋁膠體籽晶、 tio _ 2溶膠、硝酸銨以及高能球磨前驅體等一系列因素對相變溫度、最終產物微結構、相變過程等的影響。
  14. A low detonation velocity explosive with medium density ( lg / cm3 ) and proper power ( > 320ml ). which made from obsolete propellant by controlling the granularity and adding the inhibitor, is studied in this thesis ; the distribution of water in the powdery propellant is described, the effect of detonation velocity from different granularity of powdery propellant is studied and the simulated mathematical model on leakage of water in low detonation velocity explosive is also showed furthermore, the method involved in controlling the leak of water in explosive is provided. meanwhile the effect of inhibitor is experimented some of formulations and processes of low detonation velocity explosive are given in details

    廢棄發射藥可直接用來製造凝膠炸藥，在發射藥顆粒的空隙中加入氧化劑和高分子的混合溶液，經過一段時間后氧化劑溶液變成凝膠狀態即可制得灌注炸藥，該灌注炸藥具有密度較高（ 1 . 4g / cm ~ 3 ） 、抗水、爆速較高的特點；文中對灌注液所涉及的材料、工藝流程進行了研究；分析了灌注炸藥的力學性能；利用灌注炸藥的高爆速及發射藥的低爆速組成一定形狀可用來形成特殊的爆轟波，利用matlab程序設計出了平面波發生器並對影響因素進行了討論。
  15. The results are consistent with contact - dependent signaling between dendritic protrusions and astrocyte processes during the formation of dendritic spines

    在形成樹突脊的過程中樹突狀突起與星形膠質細胞相互作用的信號傳導是接觸依賴性的，本研究結果與之一致。
  16. The cadavers were poor people and are on loan from the dalian medical university in china. they are preserved through a technique called polymer preservation, which uses liquid silicone rubber that is treated and hardened

    屍體的塑化過程為：先把人體解剖，然後脫去水份和脂肪，接著注入一種被叫作硅橡膠的物質，最後經過硬化標本完成。
分享友人
分享到 Line

分享到臉書