融熔溫度 的英文怎麼說
中文拼音 [róngróngwēndù]
融熔溫度
英文
melting temperature-
Amore 2001 has successfully investigated the gakkel ridge and arctic ocean in vicinity of its geological and geophysical nature, as well as the nature of sea ice and biology in this area. the preliminary onboard petrology and bathymetry results show that the mantle beneath the gakkel ridge with low temperature has only encountered very low degree partial melting during the spreading and there is no any direct relationship between the crust nature and the spreading rate along the gakkel ridge in any simple petrologic way. mantle temperature and fracture zone density also play a major role on the crust nature, besides spreading rate
對所取得資料的初步研究表明gakkel洋中脊之下的地幔僅經受了較低程度的部分熔融，具有較低的溫度。 gakkel洋中脊處的地殼性質和巖漿活動與擴張速率之間不存在任何直接的巖石學相關性，擴張而導致的巖石圈頂部的冷卻並不是決定洋脊處地殼性質的最重要因素。地幔溫度和斷裂帶的存在與否及其密度對地殼性質具有重要的影響意義。First to heat pvc and sulfur together at a certain temperature, where the melted sulfur being a fine dehydrogenating agent, captured hydrogen from pvc bone chain and led to an electrially conductive polymer with conjugated electrons
採用聚氯乙烯與單質硫在一定的溫度下加熱處理，在熔融狀態下的單質硫作為良好的脫氫氧化試劑，使聚氯乙烯主鏈脫氫形成具有共軛電子的導電聚合物。And apatite. by these analyses and comparison with general granite both in china and the world and with the granite in other au or cu belt in china, the characteristics of the granite in this area are concluded as follows. it belongs to magnetite - i or syntectic granite and has crust - mantle mixed characteristics ; it was formed mainly by crystallization differentiation of melting magma and multiphase varied intrusion ; the degree of differentiation evolvement is not high ; the granite and its enclaves p. re congenetic ; the range of temperature is about 500 - 700, the range of pressure is about 2. 50 gpa - 4. 35 gpa, and the range of oxygen fugacity ( lg fo2 ) is - 15. 53 - - 14. 00 ; most granite bodies formed before the collision of plates, and few formed after the collision of plates
通過對測試數據的分析與綜合研究，並同中國和世界一般花崗巖類以及中國主要金、銅成礦巖體的花崗巖類進行對比，得出本區花崗巖類巖石具有以下特徵：屬磁鐵礦-型或同熔型花崗巖，其巖漿物質具殼幔混源特徵：主要由熔融態巖漿經結晶分異作用，通過多期變速上侵而形成；其分異演化程度較低；寄主巖基和包體具有同源性；巖石的形成溫度范圍約為500 - 700 ，壓力大約為2 . 50gpa - 4 . 35gpa ，氧逸度值1gfo _ 2為- 15 . 53 ? 14 . 00 ；該巖帶主要形成於板塊碰撞前消減的活動板塊邊緣期，為燕山至喜馬拉雅早期的大陸邊緣火山弧環境的產物。( 3 ) the result showed that when ambient temperature rises to a certain degree, the frictional surface of uhmwpe and its composites melt and gelatinize
門）當環境溫度升高到一定程度， uhmwpe及其復合材料與鋼配副的摩擦界面熔融變為凝膠狀態，其摩擦系數隨摩擦時間的延長保持不變。The imported transparent glaze fired at lower temperature was analysed semi - quantitatively by adopting emission spectroscope. the stripping of lead and cadmium from this transparent glaze fired at lower temperature in ceramic product was determined by atomic absorption spectroscope. the effect of chemical composition on the stripping of lead and cadmium was analysed. upon the author s opinion, the overproof lead stripping from the imported transparent glaze fired at lower temperature can only be settled by adopting lead - free glaze instead of adopting low - lead prescription. the author succeeded in developing an excellent lead - free transparent glaze fired at the lower temperature of 1000 1050. the success is based on an inquiry into the feasibility of using such new agents of fusion as li2o and sro in replacement of pbo ; and on a study of the effects of the contents of sio2 ， al2o3 ， b2o3and other metallic oxides on such performances of glaze as coefficient of linear expansion, fusion temperature and transparency. it is also based on an analysis of coefficient of linear expansion of blank and glaze on an analysis of coefficient of linear expansion of blank and glaze on their correlation ; and on a study of technology for preparing glaze
採用發射光譜儀對進口低溫透明釉進行半定量分析，並用原子吸收光譜儀測定其陶瓷製品的鉛、鎘的溶出量，分析化學成分對鉛、鎘溶出量的影響.結果表明，進口低溫透明釉採用低鉛配方不能解決鉛溶出量的超標問題，只有採用無鉛釉才能解決.探討用氧化鋰和氧化鍶等新型熔劑完全代替氧化鉛的工藝，研究釉料中氧化硅、氧化鋁、氧化硼和各種金屬氧化物的含量，對釉的線膨脹系數、熔融溫度和透明度等性能的影響.分析坯料、釉料的線膨脹系數及其相互關系和釉料制備的工藝，研製出優質的1000 1050低溫無鉛透明釉Rapid growth of “ mother dendrites ” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence
在特定的熔點，以低於液相線的溫度快速生成「母晶枝」 ，這是使熔融金屬或復輝快速散熱的結果。Sodium tellurite glasses are considered as potential candidates for non - linear optical applications because of high refractive index values and wide infrared transmittance. on the other hand, because the glasses have relatively low melting temperature and low viscosity after melting, they are often chosen to study the melting, evaporation and solidification of glasses in low gravity
另一方面，由於這類玻璃的熔融溫度較低，在溫度較高時會揮發產生氣體，熔融后熔體的粘度較低，玻璃形成能力強，因此被用來研究微重力下玻璃的熔化和氣化，和微重力對玻璃析晶能力的影響。The crystallization and melting behavior of mellocene - catalized branched and linear polyethylenes of low molecular weight was studied. it was found that the crystalline lattice of branched polyethylene is larger than that of linear polyethylene because of the existence of branched chains. the melting behavior of branched polyethylene is similar to that of linear polyethylene since the branched chains can not enter the lattice. however, the crystalline behavior of low molecular weight branched polyethylene is the same as that of high molecular weight linear polyethylene, but different with that of low molecular weigh linear polyethylene. kinetics theory analysis evidenced that the transition temperature of growth regime of the branched polyethylene is about 20 lower than that of linear polyethylene with the same molecular weight. it may be attributed to the existence of short branched chains
研究了金屬茂催化的低分子量支化聚乙烯和線性聚乙烯的結晶及熔融行為，發現支化聚乙烯的結構與線性聚乙烯相同為正交結構，但晶格略有膨脹.支鏈的存在對熔融行為影響不大，兩種聚乙烯的熔點均隨結晶溫度的升高而非線性增加，表現出低分子量樣品的共同特徵.但支鏈的存在對結晶行為卻有很大的影響，主要是由於支鏈的存在降低了晶體的結晶速率從而影響結晶過程，使得低分子量的支化聚乙烯的結晶行為與高分子量線性聚乙烯的結晶行為相似而與低分子量的線性聚乙烯不同.動力學分析表明，低分子量的支化聚乙烯的結晶生長方式的轉變溫度比同等分子量的線性聚乙烯降低了約20The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film
試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。It was suitable for melt spinning that temperature was 100 ~ 150, revolving speed was 10 ~ 15r / min and drawing speed was 2 ~ 5m / min
通過研究發現溫度是影響熔融紡絲的關鍵因素，熔融紡絲較適宜的條件是：溫度為100 150 ，擠出機轉速為10 15r min ，拉伸速率為2 5m / min 。Plastics - differential scanning calorimetry - part 3 : determination of temperature and enthalpy of melting and crystallization
塑料差示掃描量熱法dsc第3部分：熔融和結晶溫度及熱焓的測定Dsc and x - ray diffraction results show that after pan - milling, the crystallinity and the size of micro crystals of pa6 decrease. melting point increases and crystallization temperature decreases
表現為結晶度降低，微晶尺寸減小；熔融溫度降低，結晶溫度升高；球晶尺寸減小。Currently, there is no viable lead - free alloy with this liquidus temperature. for this reason, there is an exemption for alloys with high liquidus temperatures that contain greater than 85 % lead
目前，沒有無鉛合金能滿足這樣高的融點溫度。為此，針對高熔點溫度的合金有一個除外條例，這種合金含鉛量大於85 % 。At constant temperature, changes in melt viscosity are often due to variable feed rate and / or poor mixing
溫度恆定時，熔融粘度變化通常是由於投料速率變化和/或混和不均導致的。For example, a variation of 20 % in the feed rate causes a 9 % increase or decrease in pressure, which is a variability range of 18 %
溫度恆定時，熔融粘度變化通常是由於投料速率變化和/或混和不均導致的。Studying the heat - mass transfer and multi - spices electric - chemical reaction, a dynamic temperature model was deduced for molten - carbonate fuel cell stack. the thermal radiation, shift reaction, and the change of gas spices were considered in this model. establishing momentum equation, the paper has developed a 3d temperature and flow fields model for mcfc stack based on cfd technique
建立了熔融碳酸鹽燃料電池堆內部單體的暫態溫度模型，並考慮了電堆的輻射換熱、轉換反應、反應氣體組分變化對溫度場的影響；根據mcfc的微分控制方程組，考慮氣體組分的熱力學性質及動量變化的影響，利用數值分析方法求解熔融碳酸鹽燃料電池堆的三維流場與溫度場，分析了各作用因素對熔融碳酸鹽燃料電池堆溫度分佈的影響機制。The process of absorbing coating of moo3 - v2o5 - p2o5 - fe2o3 glasses doped with nano powder and the properties was researched. the main researches including : 1
探索低熔融溫度的磷酸鹽系統玻璃的形成區域以及該系統玻璃的某些性能變化規律； 2The extent of grafting was analyzed by ftir and element analysis and thermal properties of hdpe - g - ydh151 were studied by dsc measurement. when adding dcp to hdpe, the melting temperature and the degree of crystallization of the matrix decreased because of the crosslinking reaction of hdpe
而且mmt的加入，降低了hdpe - g - aa的熔融溫度和結晶度，這主要是因為剝離后的mmt在一定范圍內限制了pe鏈的運動，從而降低了基體的結晶能力。Comparing the results which were obtained when the reagent and temperature and time varied, we found the dislocation was displayed very clearly and accurately when we etch with koh at 290 for fifteen minutes, which was the best condition
進行了不同溫度、不同的試劑以及不同的腐蝕時間條件下的缺陷顯示實驗。發現，用熔融的koh腐蝕劑在290下腐蝕15分鐘時，顯示的位錯最為清晰、準確，效果最佳。The unstable stacking of layers of org - mmt was easily damaged under force and heat. hence, it is very important to decide the process temperature for preparing the composites, and it was found that 200 was a upper limitation of temperature
由於在高熱（ 200以上）或強機械剪切作用下，蒙脫土層狀堆疊結構會坍塌，導致不能與聚合物分子作用生成聚合物?層狀硅酸鹽納米復合材料，因此熔融插層的溫度選擇顯得十分重要。分享友人