表面成形 的英文怎麼說

中文拼音 [biǎomiànchéngxíng]
表面成形 英文
surface forming
  • 表 : Ⅰ名詞1 （外面;外表） outside; surface; external 2 （中表親戚） the relationship between the child...
  • 面 : Ⅰ名詞1 （頭的前部; 臉） face 2 （物體的表面） surface; top 3 （外露的一層或正面） outside; the ri...
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  • 表面 : surface; superficies; boundary; face; rind; sheet; skin; outside; appearance
  1. These modifications are usually in the form of surface deformations from embossing by rolls, fluted surfaces, and other fibers.

    這些變化通常是受滾筒溝槽表面以及受其他纖維的擠壓形成表面變形。
  2. A two - dimensional plain strain finite element model of infinite plate is developed to investigate the ultrasonic wave propagation and scattering on three kinds of cracks : parallel to the surface, 450 oblique angle to the surface, and quarter - circle

    摘要建立了無限長板的具有吸收邊界的二維平面應變有限元模型，在研究了脈沖超聲波在無限長板中傳播的基礎上，對板中平行於表面的裂紋、與表面成45的斜裂紋和四分之一圓周弧形裂紋三種情況的脈沖超聲波散射進行了重點研究。
  3. The light silicate rocks rose to earth s surface and formed the earliest crust

    輕的硅酸鹽巖石上升了到地球的表面和形成了最早期的外殼。
  4. Such as join lubricate in hot candied of the metal, it can lighten the hot candied mechanical intensity, and after the moisture volatilizes, it can form the membrane on the metal surface and improve quality of the product

    如在金屬拔絲時加入潤滑劑，可減輕拔絲機械強度，並且在水分揮發后，金屬絲表面能形成薄膜，可提高製品的質量。
  5. Electropolymerization methods have some attractive features including the easy adherence of the polymeric films to the surface of conducting electrodes of any shape and size and the ability to control thickness and porosity of the films by adjusting scan rate and time during electropolymerization

    用電聚合法制備分子印跡已有報道。通過調節聚合速度和聚合時間可以得到不同疏密程度的電聚合膜，並且電聚合膜可以在任何形狀和大小的導電電極表面上形成。
  6. Surface microtopography, representation and tracer of microscale vortex dislocation of hydrothermal synthetic sapphires and natural beryls are studied by using atomic force micro - scope and interference microscope

    摘要採用原子力顯微鏡、干涉顯微鏡對水熱法合成藍寶石和天然綠柱石等寶石的表面微形貌進行了研究。
  7. Through experiment and analyzing the changes of the thickness, rigidity, tensile strength and the opening rate of the conduits caused by the different kinds of coating material, the thickness of the coating and the different braiding structures, we investigate the physical and mechanical, properties of the braided conduits. the results show : the chitosan is easy to form the film structure on the surface of the conduits increasing the conduits ' rigidity clearly ; the rigidity and opening rate of the braided structure with inserted reinforcing yarn are better than the others, this will prevent the conduits collapsing and distorting effectively in the practical uses, so we select conduits of this structure for animal experiment

    在導管的物理機械性能研究方面，本課題通過塗層劑的種類（ pgla丙酮溶液和甲殼胺漿液） 、塗層劑的厚度、導管的編織結構三個方面分析它們對導管的厚度、硬挺度、拉伸強力和孔隙率等性能的影響。測試結果顯示：甲殼胺塗層易於在導管表面成膜，對導管的硬挺度有明顯提高，塗層效果較好；加筋結構神經導管在硬挺度和孔隙率方面優于其它導管，能有效防止導管在實際應用中的塌陷變形。
  8. In the simulation and analysis on culvert construction, the method of foundation - pit excavation layer by layer and step by step was used, i. e. the method that makes the surface of excavation have no stress, when the elements were excavated gradually in period of construction. at this process, the state of soil is unloading, the laws of stress field and displacement field with the depth of excavation were studied. based on the obtained stress field and displacement field after the excavation was completed, by using of the newly increased filling - elements " gravity and the grinding force, the simulation of the construction of body of the culvert and foundation - pit ' s filling layer by layer had also been done in this dissertation

    用有限元法模擬分析涵洞基坑開挖時，採用分層、分步模擬開挖過程的方法，即將計算域內單元分層「挖去」 ，使開挖表面成為無應力表面的方法，分析土體在卸載狀態時的應力場和位移場隨開挖深度的變化規律；在洞體施工后，回填土體時，據開挖完成時的應力場、位移場，通過逐級增加計算域內的單元數目，施加每級新增加單元的自重荷載，利用有限元法模擬基坑及上覆土體分層填築的施工過程，這不僅反映土體處于再加載應力狀態時，填土受力及變形的一般規律，而且這種將地基? ?涵洞? ?土體作為一個統一整體進行模擬的方法，量化了三者之間的相互作用關系。
  9. Measuring method and technique that 3d surface shape is recovered from 2d gray image ( shape from shading ) can obtain surface shape by natural way and easily realize the information integration of intersystem. particularly, this technique belongs to non - contact measurement, and it has become a puzzle and hotspot question in image measuring domain based on vision in recent years

    直接由物體的二維灰度圖像恢復其三維幾何形狀（由明暗恢復形狀）的曲面測量方法和技術，能以自然方式提取物體表面的形狀信息，且易於實現系統間的信息集成，尤其是該方法屬于非接觸測量方法，特別適合於測量由彈性模量低的易變形材料製成的零件，近年來一直是基於視覺的圖像測量領域研究的難點和熱點問題。
  10. It is assumed that as enhances the out - diffusion of oxygen atoms near the surface of si wafers. ig effect is also gained in heavily b -, p - and sb - doped si wafers respectively

    在該吸除工藝下，重摻b 、 p 、 sb矽片表面也形成了不同寬度的清潔區，體內出現了較高密度的氧沉澱。
  11. Abstract : based on the ahievement of epitaxial growth in several perovskite oxide films, we discuss the importance of substrate temperature ( ts ) and substrate material in the epitaxial growth of perovskite oxide thin films. influences of ts on growth orientation and epitaxial threshold temperature were observed. the results indicate that during the growth of the oxide films the phase formation and growth dynamics should be taken into consideration. the threshold temperature for epitaxial growth depends on the substrate materials. this demonstrates the influence of substrate material on the initial nucleation and epitaxial growth

    文摘:在成功地外延生長超導、鐵電、鐵磁等多種性質的鈣鈦礦結構氧化物薄膜的基礎上，討論影響氧化物薄膜外延生長的一些因素.考慮到相形成和薄膜生長動力學，在利用脈沖激光淀積法外延生長氧化物薄膜中襯底溫度是十分重要的工藝參數.襯底溫度對成相和生長薄膜的取向都有影響.考慮到薄膜是首先在襯底表面成核、成相併生長.因此襯底材料晶格的影響是不容忽視的.觀察到襯底材料對薄膜外延生長溫度的影響.在適當的工藝條件下，利用低溫三步法工藝制備得到有很強織構的外延薄膜.這突出表明界面層的相互作用對鈣鈦礦結構薄膜的取向有著相當大的影響
  12. But traditional methods have a lot of shortcoming when we product the aspheric optical, so computer controlled optical surfacing ( ccos ), which has the merit of the removal of deterministic, has been used in the domain of aspheric machining

    計算機控制光學表面成形技術（ computercontrolledopticalsurfacing ， ccos ）能夠有效的克服上述缺點，特別是具有定量去除和確定性控制的特點，已經成為現代光學元件超精密加工的重要手段。
  13. The solution formula of dwell time is deduced by using the pulse iteration method and the smoothing fourier transition method, and the formula can be simplified referring to workpiece shape. according to the anastomotic status of the tool and workpiece surface, we present the new model of the inherent relation among local pressure density, removal rate, convergence ratio and residual errors, and the corresponding formulas are given. the forming cause of the edge effect in the polishing process is analyzed, and the means which reduces the edge effect is put forward

    2 、針對計算機控制光學表面成形（ ccos ）的加工方式、誤差收斂特點，研製了去除函數呈高斯分佈的雙轉子結構研拋模；採用脈沖迭代法、平滑因子傅立葉變換法推導出駐留時間的演算法，求解過程中根據工件面形的特點作了各種形式的簡化；提出了工件表面和研拋模的吻合誤差與局部壓強、材料去除率、收斂比之間內在關系的數學模型，並推導出相應的計算公式；分析了邊緣效應產生的原因，在加工過程中採用相對壓力因子對去除函數進行修正，可以消除邊緣效應的影響。
  14. Results show that the empty and porous balls of tio2 were grown on the surface of fine tourmaline particles dispersing in the tio2 film based on the copper net, under the effect of the nature electric field of fine tourmaline particles

    用溶膠?凝膠技術在紫銅網表面成功生長電氣石tio _ 2復合薄膜，該復合膜中電氣石微粒表面形成了tio _ 2空心球簇結構和tio _ 2層狀微粒簇結構。
  15. It shows the nanometer particles have automation to make the friction surface in a comparatively even state. 4 ) through tribology chemistry function, the nanometer cacoj and cao particles form a deposited film on the wear scar ' s surface or strengthen the surface through a small amount of metal ca ' s diffusion to improve the friction surface ' s a

    （ 4 ）納米碳酸鈣和納米氧化鈣粒子通過摩擦過程中的摩擦化學作用在磨斑表面上形成了沉積膜，少量金屬鈣通過擴散作用滲透到鋼基體表面，形成表面強化層，提高了表面的耐磨性。
  16. The compatibilities of sample a3000 with six kinds of electrolytes were investigated too. the compositions of the solid electrolyte interphase ( sei ) films formed during the first charging process were analyzed by ftir spectra. the relationship between the sei films and the compatibilities of samples with electrolytes was examined

    考察了具有最佳貯鋰結構的a _ （ 3000 ）試樣和六種電解液之間的相容性，利用ftir圖譜對a _ （ 3000 ）試樣在上述六種電解液中首次充電時在炭負極表面所形成的sei （固體電解質中間相）膜的成分和織構進行了分析，研究了試樣和電解液的相容性與sei膜的關系。
  17. In this paper, molecular dynamics simulation is carried on the nanometric cutting of defect - free monocrystalline silicon. based on simulations, a reasonable explanation is given to the forming mechanism of chip and surface machined in the cutting process of monocrystalline silicon. moreover, the feasibility of brittle - ductile transition of monocrystalline silion is studied with the method of first principle stress

    對內部無缺陷的單晶硅的納米切削過程進行了分子動力學模擬.通過模擬結果，對單晶硅納米切削中的切屑形成過程和加工表面的形成過程做出了合理的解釋.並用第一原理應力計算方法對單晶硅納米切削過程中的脆塑轉變的可行性進行了研究
  18. High titanium type electrode used for welding in all positions. it has excellent weldable and is suitable for welding low - carbon steel light - gauge sheet or light structures where beautiful bead appearance is requested, such as vehicles, buildings and machinery, etc

    高鈦型藥皮焊條，焊接工藝性能優異，適用於要求焊縫表面成形美觀的低碳鋼薄板或輕型結構，如車輛，建築機械等，可全位置施焊。
  19. Cnc glass engraver machine center is a high technology equipment in which cad / cam, cnc, mechanical design and manufacture, motor driver technology, and computer controlled optical surfacing ( ccos ) technology are integrated

    計算機數控玻璃刻花中心是國內最近發展起來的高新技術設備，集成了cad cam技術、計算機數控技術、機構設計、電機驅動技術、玻璃光學表面成形技術。
  20. In this article some basic problems in the ccos are studied on the aspheric optical compound machine tool ( aocmt ). the main contents and innovations include : [ 1 ]. the deterministic model is built for grinding and polishing processes

    本文以光學非球面復合加工機床（ asphericopticalcompoundmachiningtool ， aocmt ）為對象，對計算機控制光學表面成形技術中的一些基本問題進行了研究。
分享友人
分享到 Line

分享到臉書