表驅動模擬 的英文怎麼說

中文拼音 [biǎoqūdòngmónǐ]
表驅動模擬 英文
table driven simulation
  • 表 : Ⅰ名詞1 （外面;外表） outside; surface; external 2 （中表親戚） the relationship between the child...
  • 驅 : 動詞1. （趕） drive （a horse, car, etc. ） 2. （快跑） run quickly 3. （趕走） expel; disperse
  • 模 : 模名詞1. （模子） mould; pattern; matrix 2. （姓氏） a surname
  • 擬 : 動詞1. （設計; 起草） draw up; draft 2. （打算; 想要） intend; plan 3. （模仿） imitate
  • 驅動 : [機械工程] drive; prime mover
  • 模擬 : imitate; simulate; analog; analogy; imitation; simulation模擬艙 boilerplate; 模擬電路 [電學] circ...
  1. The feedbacks of position, velocity, acceleration and dynamic pressure were applied to adjust the model, so the control system of single jar electrodraulic servo mechanism was built. to reduce the system error and interference error, the compound control was designed. the results of simulations showed that the magnitude attenuation and phase lag of the system come to the project demand

    引入包括位置反饋、速度反饋、加速度反饋和動壓反饋在內的反饋控制技術對電液伺服驅動機構模型進行綜合校正，從而建立單缸電液伺服控制系統，並在分析系統誤差和擾動誤差后，加入復合控制減小系統誤差和抑制干擾，模擬結果表明復合控制系統的控製品質有了明顯改善，能夠滿足工程需求。
  2. The optimum balancing of a four bar linkage with elastic links is studied, in which the control torque of redundant drives is taken as the design variable, and the shaking force and shaking moment of the mechanism are taken as the objective. the numerical simulation shows validity of the method

    針對一平面彈性四連桿機構，以其震動力和震動力矩的加權和為目標函數，以冗餘驅動力矩為變量，對附加冗餘驅動的彈性機構進行最優平衡，其模擬結果表明該方法是有效的。
  3. The generation of energetic ions during the interaction of a linear - polarized ultra - short ultra - intense laser pulse with solid targets are examined by particle simulation. three energetic ion populations are observed and the acceleration mechanisms are analyzed, respectively. the first population is pulled out from the target by the electron jet in front of the target

    模擬觀察到三群高能離子的產生，並對其加速機制一一進行了分析:在靶的前部，向外噴射的高能電子在靶前形成電子云，將一部分離子拉出靶面，形成第一群高能離子;激光驅動大量高能電子向靶內輸運，這些電子牽引靶前部的離子向前加速，形成第二群高能離子:高能電子很快穿透靶，在靶后形成電子云，加速靶后表面處的離子，形成第三群高能離子。
  4. According to the working principle of thermo - electrode, we demonstrate the structure of enlarged reflection area and the structure of step broaden waveguide to improve the switch ' s performance and bring down the driving power. according to the fabricating condition of our lab, we proposed simple wet - etching method to fabricate the oversized waveguides and peeling - off method to fabricate the electrode

    針對全內反射和熱電極的作用特點，在全內反射型熱光開關的設計中提出了擴大反射區結構和漸變展寬結構，理論模擬和實驗結果表明該方法能有效地提高了開關性能，降低了驅動功率。
  5. The mathematic models of dc servomotor and clutch operation mechanism have been built. and controller has been designed. simulation results indicate that the operation mechanism and controller has good performance

    建立了伺服電機數學模型和基於膜片彈簧的離合器機械執行系統模型，設計了伺服電機驅動離合器執行機構及控制器，模擬結果表明，採用本文設計的離合器執行機構及控制器，響應快，控制精度高，滿足車輛起步的要求。
  6. A new manipulator has been developed which driven only by two motors systema - ticly and completely. a typical representative mechanism model which called r3p manipulator has been designed. the author established the motion equation by d - h method and simulated the motion locus in space by matlab software

    本文較系統、全面的設計了僅由兩臺驅動電機帶動多個關節的新型多關節機械手臂傳動機構，並具體設計了具有代表性的r ~ 3p型機械手臂的機構模型；作者對該r ~ 3p型機械手臂進行了運動學分析，用d ? h法則建立了運動學方程，並利用matlab軟體對其手臂的運動空間進行了模擬。
  7. With the use of new mcu p87c591, as the techiniques of serial communication and negative display of lcd, the dashboard has a very beautiful apearence and the system is simplified. not only the analogy signal and the pulse signal can be sampled into the instrument, but also the datum on the can - bus should be transferred into the system whit the connection to the in - vechile network. under the guindance of the idea of " informatic design ", the digital lcd dashboard system is developed, and the professional manufacturer of lcd display device is directed to develop and to design the special lcd module, by which the new lcd production is greatly optimized. all these intentions bing about a very well goal

    在研製數字液晶儀表過程中，應用了新型單片機p87c591 、串口驅動技術和負顯技術，使該數字液晶組合儀表結構簡單，視覺美觀，既可以通過模擬通道、數字通道測量車輛傳感器的信號，又具備接入車輛總線、從can總線上獲得相關數據的能力。在項目開發過程中，運用「信息化設計」的觀點開展液晶顯示模塊的開發和設計工作；並根據軟體工程的原則，優化了液晶模塊的電路設計，使該項產品的開發取得了好的效果。
  8. The simulating eye model was created based on anatomy and muscle characteristics, and animated by multi - curve spectrum, which indicates time - varying muscle contraction

    首先依據人眼解剖結構及肌肉控制原理建立模擬模型，再用表示各肌肉歸一化收縮量隨時間變化的多線譜曲線驅動模型，模擬不同的人眼運動及表情。
  9. The compensator was h ( s ) = 2370s. the results of simulation showed that attenuation factor of the first order of the third control system was as much as ten times of the value of the system without controller

    通過模擬表明，採用速率傳感器，在前三塊帆板上布置壓電驅動器時，一階最大衰減因子為無控時的10倍，可以使脈沖衰減時間縮短15倍。
  10. Firstly the dissertation describes the hardware and software architecture, and shows the goal of this design. from requirement analysis to modules implementation, the dissertation gives the whole vision of the development process. secondly, it describes the low level layer implementation

    本文重點闡述了數字示波表的整體框架設計，圖形界面介面設計，內存管理設計，消息隊列管理以及底層硬體驅動程序和部分功能的實現，同時還說明了高級語言級別的軟體模擬系統設計和實現。
  11. It presents the verification strategy used in the whole eda design flow of the chip. the simulation on module level ( inc. post - layout ) uses the software event - driven simulator, the simulation of the associated modules or whole system uses cycle - based simulator and hardware emulator, for the gate - level netlist produced by using top - down design flow, the sta tool can analyze the static timing, and more formal verification is used to ensure the correct function

    本章還提出了系統在整個eda設計流程中的設計驗證策略方法：模塊級的模擬（包括布線后的模擬）全部採用事件驅動式的軟體模擬工具來驗證，各大模塊的聯合模擬及整個晶元的功能驗證（寄存器傳輸級與門級）使用基於周期的模擬工具和硬體模擬器；對于採用top - down的設計方法得到的門級網表使用專門的靜態時序分析工具來進行時序分析以及採用形式驗證來保證正確的功能。
  12. Scientific computation visualization interactive virtual reality computer dynamic simulation etc., to study thoroughly and carefully on critical technologies such as mixed - language programming simplification of scene models displaying realistic image and animation of 3d scene models and so on in this dissertation, the methods to build scene models were studied and applied to develop a dynamic simulation system of 3d railway scene based on this idea, the major study contents and results can be summarized as follows : 1 ) mixed - language programming can complement each other between different programming languages and the method has a general significance and can become popular many computation models including development of dtm optimum of dtm and reorganization of dtm were developed with fortran language in order to use the ripe codes, the dissertation succeeded in integrating the developed fortran codes to the visual c + + environment and achieving the course of mixed - language programming 2 ) the methods to build scene models for 3d location design were discussed in the dissertation and the development and animation of scene models had been realized by applying synthetically those technologies such as computer graphic computational geometry and geometrical modeling and computer dynamic simulation etc, and adopting opengl 3d graph library then achievement was got by using the technology of 3d visualization to livingly express design results 3 ) combing with the concerned study and development projects, adopting vc + + as development tools and in the light of those theories and algorithms stated in this dissertation, a software, which could build scene models with realism for 3d railway location design, in the name of " the dynamic simulation system of 3d scene of railway " was developed., the correctness was proved by using the software to build the 3d scene models and achieve their animation of suining - chongqing railway and yunnan - xizang railway

    本文綜合利用計算機圖形學、科學計算可視化、人機交互、虛擬現實、計算機動態模擬等理論和技術，針對混合語言編程、真實感圖形繪制以及三維景觀模型的動畫驅動等關鍵技術，進行了深入細致的研究，從而探討了建立逼真景觀模型的方法，並基於本文提出的方法研製了一個鐵路線路三維景觀動態模擬系統。基於這一思想，本文主要研究內容及研究成果如下： 1 ）混合語言編程可以實現語言優勢互補，具有普遍意義。針對數字地面模型的建立、優化、重組等計算模塊是成熟的fortran程序代碼，本文成功實現了vc + +與fortran語言的混編； 2 ）緊緊圍繞三維選線設計中景觀模型的建立方法展開研究，綜合利用計算機圖形學、計算幾何及幾何造型學以及計算機模擬技術，採用opengl三維圖形庫，實現了景觀模型的建立以及動畫驅動，使得三維可視化技術成功應用於選線設計成果的三維直觀表達； 3 ）結合有關科研課題，利用vc + +開發工具，以本文所述的理論和演算法為基礎，研製和開發了一個建立三維選線設計逼真景觀模型的系統軟體- - 「鐵路線路三維景觀動態模擬系統」 。
  13. In addition, the dynamic equation of the rotor with trailing edges and the 2 - x actuator has been modeled for analyzing the aerodynamic performance of the rotor. the result of the analysis tells us that the performance of the rotor with trailing edges can get a remarkable improvement

    進而研究旋翼動力學模型，將推挽式雙x驅動器模型作為后緣附翼的一種驅動機構，分析旋翼的氣動性能，模擬運算結果表明，后緣附翼智能槳葉在各方面的性能都有顯著的提高。
  14. The relations between the mode frequency, static characteristic and the framework parameters are studied. a two dimension crossed symmetric cantilever flexure hinge is investigated using finite elements method. the simulation of the mode frequency and the study of the relation between the displacements and the stress indicate that this flexure hinge has good flexibility and linearity between the displacement and the maximum stress

    研究了二維復合式懸臂梁柔性鉸鏈模態頻率、靜態特性與鉸鏈結構參數之間的關系；建立了結構參數和力學特性西北工業大學博士論文之間的對應關系;研究了基於復合式懸臂梁柔性鉸鏈的二維十字對稱柔性鉸鏈結構，對其模態頻率以及位移應力特性進行模擬試驗;結果表明此種結構形式的運動對稱性很好;其驅動位移與結構體最大拉壓應力值之間接近線性關系，而且這種結構可以得到100林m以上的運動位移。
  15. At this time, the approximate mechanical model of devices has been put forward, which frequency is 70 mhz, then we analyzed the euler ? bernoulli equation, find that the frequency is determined by the resonator ’ s density thickness and length ; the free - free - beam 、 coupled beam 、 support beam 、 transducer have been designed ; the model was simulated and modal analyzed on the coventorware and were consistent with the designed parameter. the silicon surface microfabrication process was developed and emphatically introduced several key surface microfabrication technologies, and was simulated by coventorware

    本文通過分析歐拉-貝努立方程，得出濾波器的共振頻率主要由諧振梁的密度、厚度和長度決定，考慮切變形和轉動慣量的情況下，完成微機械諧振梁、支撐梁、驅動電容的設計;在coventorware軟體上進行模擬，分析結果與理論設計比較好地吻合;對微機械濾波器的加工工藝進行設計，給出器件的完整的工藝流程，重點介紹微機械表面加工工藝，並在coventorware上進行模擬。
  16. The result of personalization can describe the characters of a specific human face. fap stream is imported to animate the face model. the animation result mimics the motions of facial expressions and motions in real time

    該系統用fdp流對人臉模型進行特定化，特定化的結果描述了人臉的基本特徵；用fap流驅動人臉模型，實時地模擬了面部的表情和動作。
  17. Accordingly, a new framework, which provides a common scheme for the numerical simulation on the macroscopic behavior of ferroelectrics though multi - scale analysis on the coupled thermo - electrics - mechanical behavior of multiphase in heterogeneous material, is induced to construct the effective constitutive equation of multiphase. in chapter four, based on the law of domain nucleation and domain wall motion of 1800 domain switching, a new scheme of domain switching and numerical simulation approach is put forward on the foundation of thermodynamics. driving traction, nucleation criterion, velocity of domain wall motion, kinetic relation and rate of domain switching in a single grain are given

    第四章以鐵電體1800疇變的過程中形核規律和疇界運動規律的實驗觀察結果為基礎，根據熱力學理論建立鐵電體疇變的理論框架和數值模擬方法；給出了單疇內疇變驅動力、新疇形核準則、疇界運動速度公式、疇變動力學的表達式，單晶的疇變速率公式；用細觀力學的觀點給出了對多晶鐵電體多場耦合的有效性質進行包含疇變速率影響的多尺度分析方法。
  18. The simulation results prove that the pdm control theory can be fit for the high frequency ac link power conversion distribution system, especially be suitable for the electric driver system of the electric vehicle in the future

    模擬結果表明，本文提出的這種高頻交流脈沖密度調制技術適用於高頻交流環節功率變換分佈系統，特別適合於作未來電動汽車的高頻交流驅動系統。
  19. The concrete design method of the votating speed difference frequency fuzzy controller is studied in detail. based on single - chip microcomputer 8031, using table look - up method, votating speed difference frequency fuzzy controller applied to induction motors is implemented. simulation result demonstrates that the control result for the producing plastic flat yarn of votating speed difference frequency fuzzy control to the speed of induction motors is idealer

    本文對轉差頻率模糊控制器的具體設計方法進行了討論：以單片機為核心，用查表法實現異步電動機轉差頻率模糊控制；最後，結合工廠塑料平膜拉絲機驅動電機參數對系統進行了模擬，分析了轉差頻率模糊控制對異步電動機轉速的控制效果，結果是比較理想的。
  20. Finally, the closed loop control strategy through nonlinear states feedback is designed by a lyapunov function for the averaged system and realize the position control of the non - holonomic robot. the simulation results show that the open - loop control method based on neural network and the feedback control method of the position are effective

    模擬結果表明本文設計的基於神經網路的位置開環控制方法及針對簡化哈爾濱工程大學博士學位論文後的平均系統設計的基於李亞普諾夫函數方法的非驅動臂任意位置臂環控制是非常有效的。
分享友人
分享到 Line

分享到臉書