軸化體軸形成 的英文怎麼說

中文拼音 [zhóuhuàtǐzhóuxíngchéng]
軸化體軸形成 英文
axiation
  • 軸 : 軸Ⅰ名詞1. （圓柱形的零件） axle; shaft 2. （對稱部分的直線） axis 3. （圓柱形的纏繞器物） roller; spool Ⅱ量詞（用於纏在軸上的線以及裝裱帶軸子的字畫）
  • 體 : 體構詞成分。
  • 成 : Ⅰ動詞1 （完成; 成功） accomplish; succeed 2 （成為; 變為） become; turn into 3 （成全） help comp...
  1. The author suggests that the three lithosphere - scale faults, lancangjiang fault, jinshanjiang - ailaoshan fault and axis fault in the middle of the basin, are the main geological structures that control the formation of basin, magmatism and metallogenic congregate district. the anticline structure with an axis of triassic strata and the related fault system within the basin, and gonglang arch - shaped folding structure in the south of the basin are the geological structure controlling the formation of ore fields. junctions of two or more faults with different orientation, interlayer cataclastic structural zone and oxidation - reduction ( redox ) boundary were the favorable position for the formation of ore bodies

    認為瀾滄江斷裂、金沙江-哀牢山斷裂及盆地中軸斷裂這三條巖石圈斷裂是主要的控盆-控巖（巖漿巖）構造及礦集區尺度的控礦構造；盆地中以三疊系為軸的背斜構造及相關的斷裂系統、盆地西南緣公郎弧形構造等是礦田尺度的控礦構造；多組斷裂的交叉、層間破碎帶及地層柱中的氧化還原界面是形成礦體的有利部位。
  2. In one, equiaxed dendrites form and subsequently ripen into more - or - less spheroidal shape, suitable for forming

    一個是先形成由等軸晶粒構成的晶枝體，再熟化形成類似的球狀體。
  3. Strong and high effective mixing of swzzero gravity particle mixer can meet your demand. two mixing axles make a equal speed and reverse rotation in horizontal tube. oars on mixing axle make the materials do radial motion, circular motion and axial motion. in a short time, the particle can be stirred homoginously. nozzel on cover of tube can be used when the solid is mixed with liquid

    無重力粒子混合機（以下簡稱無重力）以強烈、高效混合而來滿足用戶需求，臥式筒體內兩根攪拌軸等速反向旋轉，攪拌軸等速反旋轉，攪攔軸上特殊布置的漿葉確保物料徑向、環向、軸向三向運動，形成復合循環，在極短的時間內達到均勻混合，筒蓋上布置霧化噴嘴供你固液混合時使用。
  4. Beginning with the connotation of chinese, the authors analyses the relationship between speech form and speech content, illustrates the ever - changing form should follow its basic rules. comparing with content, the author thinks speech form has the feature of direct perception, the stability and limitation. thus, chinese teaching based on the form is not only in accord with the law of individual perception and psychological development, beneficial to develop the students " perception structure, but also it " s an important principle, the center of chinese teaching, the main foundations to train the students " language ability

    本文澄清了人們對語文學科的幾個基本概念的曲解和誤會，從語文的內涵入手，科學地界定言語形式和言語內容的概念與關系，並從學習個體認知學習的心理發展規律和語文教學自身的內在規律方面尋找理論依據，闡述了言語形式雖是「千變萬化」的，但有其基本規律可循，且此基本規律是「千篇一律」的，與內容相比，具有相對的直觀性、穩定性和有限性，所以，語文教學以言語形式為主，既符合學習個體認知學習的心理發展規律，有助於學生良好的認知結構的構建，遷移學習能力的形成及認知能力的發展；同時，以言語形式為主，又是語文教學的一條重要的客觀規律，它是語文教學規律性運轉的「軸心」 ，是培養學生言語能力的「抓手」 、語感能力形成的源泉、弘揚人文性的依託。
  5. During ion source operating, alternating axial magnetic field and azimuthal electric field in discharge tube ionize hydrogen gas purified by hot palladium pipe, and form plasma, hi fifties year, research reports studied on rf ion source are numerous however most of them are concerned about application, and research reports relevant to discharge theory or experiment model are unfrequent

    離子源工作時，放電空間交變的軸向磁場和渦漩電場激發放電管中經鈀管純化后通入的氫氣電離，形成等離子體。 50多年來，關于高頻離子源的研究報告很多，但是，這些研究主要都集中在應用研究方面，有關高頻無極環形放電離子源的理論與實驗模型研究不是很多。
  6. Fos + / th + / gfap + and fos + / vp + / gfap + triple labeled n - asc could be found in the mvz, pvn and son respectively ; ( 2 ) under electronic microscope, the astrocytic processes connected closely with the dendrites or axons of the neurons, where the bilateral membranes became thick. we call transiently it electron - dense areas ( edas ). the number of edas increased remarkably following hyperosmotic stimulation ; ( 3 ) when trace retrogradely, wga - hrp was microinjected into the unilateral son, pvn or nucleus of solitary tract ( nts ) respectively using the stereotaxic method, the n - ascs formed by the neurons triple - labeled with hrp / fos / th ( or vp ) and astrocytes labeled with gfap could be found in the mvz, son and pvn respectively ; ( 4 ) after being treated with heperosmotic nacl solution, intracellular calcium concentration in cultured hypothamic neurons and astrocytes increased and then decreased

    腦內gfap陽性結構也明顯增多，其分佈與fos陽性細胞分佈基本一致，表現為胞體肥大、突起粗長； ast緊密包繞在神經元周圍形成神經元- ast復合體（ n - asc ） ；在mvz 、 pvn和son三重免疫組化染色切片上可見到fos + th + gfap +第四軍醫大學博士學位論文和fos vp gfap三重標記asc ； （ 2 ）免疫電鏡下son內星型膠質細胞突起與神經元樹突或軸突之間接觸部位出現增厚的膜結構一電于緻密區（ edas ） ，高滲刺激后數量明顯增多： （ 3 ）將們個mp注入大鼠一側n卜、卜卜或孤束核（ ws ） ，分別在延髓內臟帶（ mvz ） 、 so和pvn內出現fos hrp th 、 fos hrp八p三重標記神經元和gfap陽性標記ast形成的n asc ； （ 4 ）高滲刺激使培養神經元和ast內鈣水平先升高后降低，最後維持在比高滲刺激前稍高的靜息鈣水平上。
  7. A novel low mechanical hysteretic ceramic capacitive pressure transducer has been made, by using of ceramic sealing technology ; integrate circuit ( ic ) technology and thick film plane fixing circuit technology. this transducer is made of a deformable ceramic diaphragm and a ceramic base plate, between which has an air cavum. a coaxial gold electrode was fired onto the diaphragm and the base plate

    本文利用新型陶瓷技術、集成電路技術和厚膜平面安裝電路技術，採用零力學滯后的陶瓷和陶瓷密封材料進行設計製造了一種非充液乾式的電容式壓力傳感器，該壓力傳感器由較厚的陶瓷基體和較薄的陶瓷膜片構成，中間形成一空氣介質腔，在基座和膜片之間內置同軸的雙電極，組成兩個電容，當膜片承受壓力時發生位移，使電容量產生變化，經後置處理電路直接轉換為可輸出的直流電壓信號。
  8. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  9. Rebounding displacement of slope and axial force of anchor bars increases as the increment of the included angle of the rebounding displacement vector and x positive axis will reduce as the increment of horizontal tectonic stresses. the reduction of lithologic characters and weak interplayer have unfavorable influence on stability

    支護錨稈軸力也增大；隨著水平構造應力的增加，回彈位移矢量與水平x軸正方向所形成的角度將減小；邊坡巖體巖性參數的弱化和軟弱央層的存在都對邊坡的穩定造成不利的鍘惻。
  10. In the last part of the paper, we derive the euclidean equation of motion of the magnetic vector in a theoretical magnetic film consisting of biaxial - anisotropic molecular ferromagnets, which is reduced to the 2 + 1 dimensional sine - gordon field equation in the strong anisotropy limit. we obtain various domain structures which are the static solutions of the sine - gordon field equation

    最後考慮由雙軸各向異性分子磁體形成的理想無界膜，在強各向異性極限下，採用半經典近似方法，將磁化矢量的時空運動方程約化為2 + 1維sine - gordon場方程，從而得到各類疇結構。
  11. Length, diameter, density, fresh weight, dry weight, water content, osmotic potential and element concentrations ( ca, mg, na, k, cl ) were determined for each. seedling of b. gymnorrhiza and a. corniculatum were cultured for 60 days on various salinity of seawater ( 0, 5, 10, 15, 20, 30, 40, 50 ) in green house. samples were taken at 3, 7, 11, 15, 22, 30, 45 and 60 days after planting, separated into root, hypocotyl, stem and leaf

    本文研究了福建九龍江口木欖和桐花樹胎生繁殖體從果實形成到發育成熟過程中形態、生物量、含水量、胚軸密度、滲透勢、五種主要礦質元素（ ca 、 mg 、 na 、 k 、 cl ）等的變化和溫室內人工鹽度梯度栽培下木欖和桐花樹成熟繁殖體長成幼苗（ 0 60d ）過程中形態、生物量、含水量、滲透勢、光合蒸騰特性、五種主要礦質元素（ ca 、 mg 、 na 、 k 、 cl ）等的變化；並且在野外自然條件下，跟蹤調查不同灘塗位置下秋茄成熟繁殖體定居成活、自然死亡狀況以及測定幼苗生長過程中（ 1年）形態、生物量、含水量、光合蒸騰特性等的變化。
  12. The early coaxial progressive depressing makes the forming of tectonic lens in the competent rich - sodic and incompetent rich - mud rocks ; the later nocoaxial progressive shearing makes the tectonic compression fracture into extension fracture in the early tectonic lens, at the same time, the great drop of pressure leads to the hydrofractureing of deep fluid along the fracture in the rich - sodic rocks, and then produces the hydrofracturing breccia

    早期共軸遞進擠壓使能幹性的富鈉質巖系與非能幹性的富泥質巖系發生構造透鏡石香腸化；晚期的非共軸遞進剪切使早期在透鏡體中心形成的構造裂隙由剪性轉化?張性，並?生巨大的壓力降使深部的流體在富鈉質巖系中沿裂隙發生水力壓裂作用，從而形成雙王水力壓裂含角礫巖。
  13. According to the train of thought of strengthening the center, radiating around an axis, carrying the work forward gradiently, then driving the whole province forward, we can make an overall distribution, and create a metropolitan area with the core of nanchang, with an axis of developing the towns along the line of jing - jiu and zhe - gan railways and with a secondary axis of developing the towns along the line of no. 105, no. 206 and no. 323 national road

    按照「強化中心、軸線輻射，梯度推進、帶動全省」的思路進行總體布局，使之基本形成以南昌為核心的大都市區，京九鐵路和浙贛鐵路沿線的城鎮發展為主軸帶，及沿105 、 206 、 323國道城鎮發展為次軸帶的發展態勢。
  14. In autograft from inflorescence stems callus tissue was found 4 days after grafting. no xylem and sieve elements were differentiated in both scion and stock in this period

    C24擬南芥花序軸自體嫁接后4d ，嫁接面處愈傷組織開始形成，嫁接體雙方還沒有分化出管狀分子和篩分子。
  15. ( 3 ) the most principal factors that influence the supersonic atomization process include the flow ratio of the gas - liquid metal ( gmr ) value, the flow of atomizing of gas and the range of the inverse vortex taper. the more of the value of three factors, the more advantage they are for the atomization and the more fine the powders are. ( 4 ) the produced powders are the best in efficient atomization efficiency, particle diameter, particle shape and dispersion when the solder alloy is zhl63a, atomizing medium is n2, the protrusion h = 6. 0mm, atomizing gas pressure p = 100mpa, over - heat temperature t = 167 ( t = 350 )

    研究結果表明： （ 1 ）超音速霧化器的氣體流場在導液管下端形成一個倒渦流錐，在二維空間上呈軸對稱的雙峰分佈，負壓形成於這個倒渦流錐內； （ 2 ）修正後的霧化氣體速度公式可以滿足超音速霧化的要求； （ 3 ）影響超音速霧化工藝最根本的因素有氣液質量流率比（ gmr ）的大小、霧化氣體流量和倒渦流錐范圍，三個因素的值越大，對形成細粉越有利； （ 4 ）在焊錫合金為zhl63a ，霧化介質微n _ 2 ，導液管突出高度取h = 6 . 0mm ，霧化氣體壓力取p = 1 . 0mpa ，合金過熱度取t = 167 （ t = 350 ）時，所制得的粉末在有效霧化率、顆粒球形度、粒度及其離散度三個方面綜合性能最好。
  16. In order to facilitate integral economic development of hankou and hanyang according to the “ near future construction plan of wuhan city ”, in this year, wuhan city will initiate the construction of urban express trunk road that is from the tianhe international airport to wangjiadun district, moon lake bridge, and wuhan new city proper that includes wuhan economic and technological development zone, forming a “ t ” type economic development pivot of the city

    根據《武漢市近期建設規劃》 ，為促進漢口、漢陽經濟一體化發展，今年武漢市將啟動天河機場經王家墩地區、月湖橋、武漢新區至武漢經濟技術開發區的快速城市主幹道建設，形成城市「 t 」形經濟發展軸。
  17. Under the trends of the economic globalization, networking socialization and educational popularization, the construction way of learning society revolutionary should be processed around the learning organization and management of network society

    中國學習型社會的形成有其社會文化基礎、內在依據、運動軸心、載體和途徑，在經濟全球化、網路社會化、教育大眾化的發展趨勢下，中國學習型社會的構建之路應主要圍繞學習型組織及其網路社會的治理而展開。
  18. The network carbide and acicular martensites that existed in the microstructure of the root grooves of the spline due to improper carburating and quenching process of the shafts, led to the initiation and propagation of the intergranular microcracks and were the main reason that caused the early fracture of the shafts

    由於滲碳淬火工藝不當，在二軸花鍵槽根部的組織中產生了網狀破化物和粗大的針狀馬氏體，在外力作用下形成沿晶顯微裂紋並擴展，是導致二軸疲勞斷裂的主要原因。
  19. It showed that the induction efficiency of the resistant calli were the same among all explants of different age, but the embryos on the calli from explants of 7 days appeared earlier than those from explants 11 and 30 days. in order to compare the resistant calli induction efficiency, petioles and hypocotyls were excised from 30days aseptic seedlings to transform with pbinctbs under the same condition. the resistant calli induction efficiency of petioles was higher than those of hypocotyls. a more detailed analysis of the different types of explants showed that the number of pcr positive plants induced from petioles was higher than that from hypocotyls

    在相同條件下的轉化實驗中，發現不同苗齡的外植體的抗性愈傷的誘導頻率基本相同:還進一步研究了胡蘿卜同一苗齡不同部位的抗性愈傷形成率，同時用3od苗齡（照光3周）的葉柄和下胚軸做轉化實驗，發現葉柄的抗性愈傷形成率高於下胚軸的抗性愈傷形成率，進一步的實驗發現，由葉柄誘導的苗子的陽性率高於由下胚軸誘導的苗子的陽性率，此結果和pawlicki的結論是一致的。
  20. Frames optimization and extrusion forming technology for copper alloy solid bearing retainer

    銅合金實體軸承保持架結構優化及等溫擠壓成形
分享友人
分享到 Line

分享到臉書