輪轉線 的英文怎麼說

中文拼音 [lúnzhuǎnxiàn]
輪轉線 英文
cycloid
  • 輪 : Ⅰ名1 （輪子） wheel 2 （像輪子的東西） wheel like object; ring; disc 3 （輪船） steamer; steamboa...
  • 轉 : 轉構詞成分。
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 輪轉 : rotate; [計算機] round robin 輪轉計 trocheameter; odometer; 輪轉印刷機 rotary machine; rotary pre...
  1. Model gk39 high - speed bag sewing closer is adopted a special part, which the needlecan move together with the looper. the machine is equi pped with aluminum alloy house, gear running, needle bar and looper system to form double - thread chain stitch. the main running parts are adopted bearing and the machine has the special design such as automatic oil dripping lubrication system, roller feeding and needle feeding in step having the automatic cutting system

    說明：本機gk39為高速封包縫紉機，是唯一採用「紉針機構」針同步的封包縫紉機，採用鋁合金外殼，輪傳動，針桿挑線和彎針勾線，組成雙線鏈式線跡。主要轉動部位採用軸承，並配有自動滴油潤滑油路。
  2. Analyse the tooth geometry of klingelnberg cyclo - palloid spiral bevel gear., according to the relative position and kinematic relation of the cutter heads, virtual crown gear and the processed wheel blank, established the system of coordinates of the gear cutting, dedcuced the tooth face equation of the virtual crown gear, according to relations of the gear cutting and space theory of engagement, deduced the tooth face equation of klingelnberg cyclo - palloid spiral bevel gear, and drawing the three - dimensional graphs of the virutal crown gear and klingelnberg cyclo - palloid spiral bevel gear according to the design and setting parameters

    對克林貝格擺線齒錐齒輪進行齒面幾何分析。根據銑齒加工中刀盤、搖臺和輪坯的相對位置和相對運動關系建立了切齒嚙合坐標系，由矢量的旋轉推導了產形輪齒面方程;根據空間嚙合原理和切齒嚙合關系推導了被加工齒輪的齒面方程;由設計參數和銑齒調整參數計算得到齒面離散數據，繪制了產形輪和擺線齒錐齒輪的三維齒形。
  3. First the sketch / datum plane is fitted by least - square distance, then the extruded direction or axis with the flank points of the cloud is extracted in quadratic paogramming arithmetic, and certain points projected to gain 2d sketched datas. feature points are defined to segment the sketch datas, and the sketch profile is generated by fitting separately the line and circle segment

    使用最小二乘方法擬合草圖基準平面，採用二次規劃方法提取拉伸方向和旋轉軸線，然後將數據點投影以獲取草圖數據，通過柵格劃分提取草圖邊界輪廓數據，再對這些邊界數據進行基於特徵點的分割，以直線和圓弧段擬合出草圖輪廓。
  4. As long as the truck is moving in a straight line, the ring gear, differential gears, and drive axles turn together without variation of speed

    當卡車直線行駛的時候，環形齒輪，差速器齒輪和驅動軸便會無變速的一起轉動。
  5. First, the wheelset is fixed and rotated by the device used hi vehicle depot as usual. second, the center line of wheelset axis is determined by a device called axis - center probe. last, the acting device for sensor can draw a whole felloe profile, which is made up of parallel - pole device and rotating - probe

    鑒於此，本文給出了一種全新的測量方案：採用車輛段普遍使用的轉輪器實現被測輪對的定位；採用車軸基準探尺測定被測輪對的軸線；採用並聯式伸縮機構和旋轉測頭作為傳感器的執行機構，測定輪輞斷面的輪廓線。
  6. In the process of the colltfolling algorithms, the relations between the free wheel and the orielltations of the robot car are ciphered out when the robot car walks ollt the straight lines, the arcs and the swerves. in addition, the pid adustor is designed

    在軌跡控制演算法中，推導出了機器人小車在直線、圓弧和轉彎行走中主從動輪與行走軌跡的位置關系，推導出了機器人小車的實時位置，設計了pid調節器。
  7. The hoi polloi of jarvies or stevedores, or whatever they were, after a cursory examination, turned their eyes, apparently dissatisfied, away, though one redbearded bibulous individual, a portion of whose hair was greyish, a sailor, probably, still stared for some appreciable time before transferring his rapt attention to the floor

    二輪馬車的車把式或搬運工人以及其他各類下等人都朝他們匆促地審視了一番，顯然大失所望，就把視線移開了。可是，有個頭發已花白了的紅鬍子酒鬼也許是個水手繼續朝他們目不轉晴地盯了好半晌，才把熱切的視線移到地板上。
  8. Bright areas reveal undeflected or stationary nodal regions while contour lines trace out areas of constant vibrational amplitude.

    亮區表示未受偏轉的或穩定的波節區而輪廓線則描繪出等振幅的區域。
  9. The company offers the following key products to complete whole set machinery and equipment for cardboard box production : high - speed fully automatic printing and slotting machine ; one color, double - color, three - color and four - color water - based printing machine ; automatic ( air suction type ) and half - automatic ( chain type ) rotary slotting and corner cutting machine, four - connection slotting and corner cutting machine, four - axis paper separating and line pressing machine, thin knife paper separating and line pressing machine, carton stapler, carton binding machine and die cutting machine

    公司產品主要有：高速全自動印刷開槽機；單色、雙色、三色、四色水性印刷機；自動（吸風式）和半自動（鏈條式）輪轉開槽切角機、四聯開槽節角機、四軸分紙壓線機、薄刀分紙壓線機、釘箱機、粘箱機以及模切機等全套紙箱機械設備。
  10. Owing to the diameters of big and small pulleys are different, while the driving pulley rotates the differential mechanism will not stay at its original place and will make linear movement along the direction of centerline

    當主動輪轉動時，由於大小差動帶輪的直徑不同，差動機構就不會停留在原處，而會沿中心線方向上作直線移動。
  11. The slant of support and roller " s axes is analysed as the main factor

    對影響回轉窯軸向運動的主要因素? ?托輪軸線與滾圈中心線的傾斜進行了分析。
  12. Threads with equal priority are time - sliced on a round - robin basis

    如果線程具有相同的悠閑權，則根據時間片進行輪轉調度。
  13. The electro - hydraulic proportional control law is given. the laws of tracking control of displacement and speed of aircraft as well as tracking control of angle and angular speed of belt wheel are designed by means of state feedback linearization and quadratic performance index linear optimal control method. the robustness of the designed systems is analyzed, and arresting processes are simulated

    給出了電液比例控制規律；利用狀態反饋線性化及二次型性能指標線性最優控制方法分別設計了系統跟蹤控制飛機位移與速度以及跟蹤控制帶輪轉角與角速度的非線性控制規律；對所設計的攔阻系統進行了魯棒性分析及攔阻過程模擬，模擬結果表明，通過選取適當比例系數或控制權系數，兩種控制系統的控制效果及魯棒特性均優于新型飛機攔阻系統。
  14. Thirdly, it utilizes line tracking and douglas - peucker line - simplification algorithm to realize the raster - to - vector conversion. a triangulated irregular network ( tin ) is constructed based on vector data, and dem point - array data is computed by interpolating grid on tin

    第三，使用輪廓線跟蹤演算法和dpl多邊形近似方法實現等高線數據的矢量轉換;並基於等高線矢量數據建立不規則三角網，再內插格網生成dem點陣數據。
  15. Change speed, adopt cam curve trough go back rounds of organization, can according to select pace make arbitrary direction turn round

    變速採用凸輪曲線槽回輪機構，能按所選速度作任意方向回轉。
  16. In this paper, a new way of real - time damage detection method was proposed according to the high speed working situation of the composite flywheels for energy storage, and a suit of equipment was developed to test the composite samples with piezoelectric disc built - in, the response waves before and after the damage occurred were recorded to the computer. on the base of traditional spectrum analysis of signal recorded, the wavelet analysis was introduced and the program in matlab language was made. with the wavelet packet decomposition of the signal, the relations between the change of response signals and damage characters were gotten, a database for damage recognition was created

    本文結合儲能復合材料飛輪高速旋轉的工作特點，提出了一種在線檢測飛輪轉子損傷的方法，自主設計一套實驗裝置對模擬各種損傷的的試樣進行了測試，試樣損傷前後的響應信號被採集后存入計算機中；在對採集信號進行傳統的頻譜分析的基礎上，引入了先進的小波分析理論，利用matlab語言編寫程序，對信號進行小波分解，得到了信號變化和損傷特徵之間的關系，建立了一個識別飛輪損傷的數據庫；小波包分解得到信號對比圖和特徵向量，可以有效判定材料內部有無損傷和損傷的程度，結合頻譜分析等，可一定程度上判定損傷的類型，為儲能飛輪的安全運轉和智能化運作提供了決策依據。
  17. Performance analysis of curve passing through on railway vehicle with independent wheels

    獨立車輪轉向架車輛曲線通過性能分析
  18. The paper analyzed the struture of the tri - eccentric butterfly vavle at length, defined the tri - eccentric butterfly valve, educed the geometry function and its characteristic about the section of the butterfly disc. the results indicate : the parallel contour line across butterfly disc thickness is normal ellipse, thereby eslablished function relations between its geometry parameters ( long axis and short axis ) of three primary sections of the butterfly disc and the tri - eccentricity ; in order to avoid interference between the butterfly disc and the valve seat as well as the valve body, combining the torque, we obtained the feasible range about the rotation center of the tri - eccentric butterfly vavle

    本文主要分析了三偏心蝶閥的結構，給出了三偏心的定義，推導出了蝶板截面的幾何方程及其性質，結果表明，沿蝶板厚度的平行截面輪廓線為標準的橢圓形，進而推導出了蝶板幾個主要截面的幾何參數（長軸、短軸）與三個偏心之間的函數關系；考慮到蝶板啟閉過程中避免與閥體及閥座發生干涉，結合蝶板的啟閉扭矩，確立了三偏心蝶閥回轉中心的適宜區域。
  19. The new ideas of this dissertation mainly lie in two points. based on the research on the traditional edge tracing techniques, this dissertation presents an improved method according to lml rule. at the same time, studying the polygonal approximation methods, this dissertation also presents an improved and based on mergence method to image contour, and implements the transform of the contour from image to graphics preferably

    本文的主要創新點在於：在研究傳統輪廓跟蹤技術? ? 「爬蟲」法的基礎上，提出了基於lml規則的改進的輪廓跟蹤方法；同時，研究了多邊形擬合法，提出了基於聚合的改進的多邊形擬合物體圖象輪廓線方法，較好地實現了對邊緣輪廓線的從圖象到圖形的轉換。
  20. This thesis has the research contents as following : 1 ) the research on the tyre nonlinearity the tyre nonlinear model affects the steering characteristics and stability of the vehicle

    本文在4ws系統的動力學特性和控制研究上進行了初步探索，取得了以下成果： （ 1 ）研究了輪胎非線性對汽車四輪轉向系統的轉向特性及行駛穩定性影響。
分享友人
分享到 Line

分享到臉書