轉矩曲線 的英文怎麼說

中文拼音 [zhuǎnjǔqūxiàn]
轉矩曲線 英文
torque curve
  • 轉 : 轉構詞成分。
  • 矩 : 名詞1. （畫直角或正方形、矩形用的曲尺） carpenter's square; square2. （法度; 規則） rules; regulations 3. [物理學] moment
  • 曲 : 曲名詞1 （一種韻文形式） qu a type of verse for singing which emerged in the southern song and ji...
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 曲線 : [數學] curve; bight; bought; profile; net曲線板 french curve; irregular curve; curve board; splin...
  1. By equilibrant theory study has been carried out for the causation to improve the oriented capability of the new type bogie to passing through the curve line

    摘要利用力（矩）的平衡原理，分析了新型轉向架曲線導向性能提高的機理。
  2. The aerodynamic characteristics of a projectile with wrap around fins are studied systematically in this paper, as follows : 1. the lift coefficients 、 drag force coefficients 、 pitch moment coefficients 、 pitch damping moment derivatives and roll damping moment derivatives are obtained from engineering calculation through looking wrap around fins as flat fins of the same projection aera

    本文對某卷弧尾翼彈氣動特性進行了系統研究，主要內容與結論為: 1 .將卷弧翼按照相同投影面積的平板翼進行工程估算，得到升力系數、阻力系數、俯仰力矩系數、俯仰阻尼導數、滾轉阻尼導數曲線。
  3. In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented

    本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。
  4. Linear induction motor is an important kind of machines which have some merits such as simple structure, low cost, durability, convenience for maintenance etc. the subject of this thesis is to study a big circular ring linear induction motor, and the major works in this thesis are summarized as follows : ( 1 ) considering the effects of the finite length of primary core, one - dimension analytical solution for the air gap field is cited in this paper. based on it, the single layer winding magnetic field is studied. considering whole - pitched and short - pitched winding configuration with odd poles and half - fulled slots in both ends, the double - layer winding magnetic field is analyzed, respectively

    本文對大圓環直線感應電機進行了深入細致研究，內容包括： （ 1 ）本文採用有限長行波面電流作用於有限長鐵芯上的模型，引用了氣隙磁場一維解，研究了單層繞組磁場，奇數極半填槽雙層繞組在採用整距和短距時磁場的分析、比較，簡單介紹了二維解； （ 2 ）用有限元軟體ansoft對大圓環直線感應電機空載氣隙磁場進行了靜態分析，並分析了結果； （ 3 ）用軟體進行了額定電壓下的瞬態分析，得到了轉矩，位移，轉速隨時間變化曲線圖，利用單極性霍爾元件測定轉速並與軟體計算結果進行了比較，採用等效電路法計算了堵轉時的最大電磁力並做實驗進行了驗證，由實驗測得了三相電流波形，並與計算結果進行了比較，對其不對稱性進行了定性分析。
  5. When analyzing skew support continuous curved box girder bridge, curved grid girder analyzing method considering warping effect is applied. matrix displacement method is applied in analyzing skew support continuous curved thin - walled box girder bridge with restrained bearing. in order to convert original rigidity equations to structural rigidi ty equations that can be solved, bearing nodal displacement matrix can be introduced, then unknown quantities at the edge of beams can be consistent with the restrained directions of skew bearings, unit rigidity matrix and unit nodal forces can be gained. structural rigidity matrix can be composed according to matrix displacement method, so nodal displacements and inner forces on the end of the rod that are unknown can be gained calculating equations of inner forces on any cross - section can be solved

    分析斜支承連續曲線箱梁橋時，採用考慮翹曲作用的曲線格子梁分析方法，應用矩陣位移法對具有約束支承形式的斜支承連續曲線薄壁箱梁橋進行分析，考慮到支座的約束條件並不與梁端彎曲角位移和扭轉角位移的方向一致，引入支座節點坐標矩陣，使得梁端的位移未知量與斜支座約束方向一致，來計算單元剛度矩陣和單元節點力，然後按照矩陣位移法組集總剛並建立結構剛度方程，根據結構剛度方程即可求解未知的節點位移及桿端力，推導出任意截面處的內力計算公式。
  6. Based on the review, the fluid flow and heat transfer in the curved circular and rectangular pipes have been researched by employing perturbation method and numerical simulation with a physical model under the rotational orthogonal curvilinear coordinate in a rotating curvilinear pipe with multi - parameters. we firstly analyzed the fully developed fluid flow and heat transfer, mixed convection heat transfer, the development of flow and heat transfer in the inlet in different cross section ( circular, elliptical, annular and rectangular crossection ). the variations of the secondary flow, axial velocity, distribution of temperature, the friction force on the wall, the ratio of friction factor as well as the nusselt number with different dimensionless parameters had been examined in detailed

    本文在總結和分析了一個世紀以來有關曲線管道流動和換熱特性的研究成果的基礎上，以旋轉正交曲線坐標系統下的多參數旋轉螺旋管道中的對流傳熱為物理模型，通過攝動方法和有限體積法，首次對各種截面（圓截面、橢圓截面、環形截面、矩形截面）旋轉曲線管道內充分發展流動的流動結構和傳熱特性（包括耦合對流傳熱特性）以及旋轉曲線管道開口段發展流動的流動結構和換熱特性進行了系統的數值模擬和理論分析，詳細討論了各種無量綱參數對管道內軸向速度分佈、二次流結構、溫度分佈、壁面摩擦力、摩擦系數比以及管道nusselt數的影響，獲得了若干創新性成果。
  7. A method is provided to measure the friction parameters of the bed. the maximum friction torque, coulomb friction torque, viscous friction coefficient and moment of inertia can be gotten by fitting the free reduced rate curve of the gimbals and measuring the motor current when the motor begins to rotate

    提出了一種測量轉臺摩擦特性的方法，通過對轉臺在無外推力作用下的速度衰減曲線的擬合以及電機啟動過程電流和轉速的測量，可以得到最大靜摩擦力矩、庫侖摩擦力矩、粘滯摩擦系數及轉動慣量。
  8. Two methods are given. one is obtained by using degree reduction of interval rational bezier curves in two parameter directions according to the character of tensor product, which is called " single step method ". by comparison for degree reductions produced by the different order in two parameter directions, the relationships of the approximation results are discussed

    然後討論了矩形域上區間有理bezier曲面的降階問題，給出兩種降階演算法：一個是針對張量積的特點將問題轉變為兩參數方向的區間有理曲線的降階逼近，即「單步法」 ，並討論單步法沿兩參數方向不同次序降階的關系。
  9. Taking dc motor test as an example, a creative idea of applications of some advanced signal processing tools, such as time - frequency analysis, wavelet, and instantaneous frequency ( if ) evaluation, in motor testing field is presented. the paper systematically summarizes basic theories of time - frequency analysis and wavelet transform based on which an in - depth research of effective if evaluation based on wavelet ridge and wavelet curve is carried out. in the end a fast t - n characteristic testing system with neither torque nor speed sensor is successfully developed

    本論文主要關注小波分析在電機性能自動測試系統中的應用，針對傳統電機測試系統以及信號處理技術在電機測試領域中應用的不足，以直流電機為例，提出了將時頻分析、小波包變換以及基於小波脊的瞬時頻率提取方法應用到電機測試領域的新思路；較系統地總結了時頻分析和小波變換的基本理論，深入探討了基於小波脊線和小波曲線的瞬時頻率提取，並成功開發了基於正交小波包分析和基於小波脊線的瞬時頻率提取的無轉矩轉速傳感器的直流電機快速測試系統。
  10. It is indicated that, when a two - speed motor is used for driving oil transfer pump, the motor with the characteristic of torque reduction on square rotary speed should be chosen ; the working economy of the variable speed pump is restricted by the characteristic curves of pipeline resistance, and its speed control range is restricted by the pipeline resistance characteristic curve, the pressure head needed by the system and the working characteristic of the pump ; when several pumps work in parallel, the pump with better performance should be changed into speed - variable pump

    指出雙速電動機用於輸油泵的調速時，應選用轉矩按轉速平方降低特性的電動機；調速泵的運行經濟性受到管路阻力特性曲線的限制，其調速范圍受到管路阻力特性曲線、系統所需揚程和泵運行特性的限制；在母管制系統中把部分定速泵改為調速泵時，應將性能較高的定速泵改為調速泵。
  11. 4. the moment - rotation - curves model has four physically explicit parameters and it may be useful for the appilication of this connection

    浙江大學碩士學位論文2004中文摘要4 .總結了物理意義明確的四參數彎矩一轉角曲線表達式，為該類節點的實際應用提供了理論依據。
  12. In the chapter 4, the theory that multi - stroke curve should be designed according to the functional requirement of the hydraulic motor was posted. in other words, the multi - stoke curve was designed according to the optimization of efficiency and the rotate speed, the stability of the torque were considered at the same time. the pro / e was used to analyze the its performance and the cam files were created

    第四章在內曲線液壓馬達定子曲線的設計計算中，首次提出了按效率優化的原則設計曲線的理念，結合轉速、扭矩無脈動、等接觸應力設計理論等研究成果，採用美國參數技術公司的pro / e軟體的motion分析模塊進行cae分析，並且生成計算機輔助加工（ cam ）文件，直接驅動cnc加工機床進行定子曲線的加工，獲得了十分理想的結果。
  13. Magnetic force pump magnet couplings " universal energy equation is educed by analyzing of demagnetization curve, ways of reverting force calculating are introduced according to the equation when inside magnet rotor have axial direction and radial displacement, circumferential moment of magnetic force has been given, magnetic force pump alnico ' s axial direction length, circumferential length, radial thickness amounts are summarized with the analyses of experiment results

    利用退磁曲線法，推導磁力泵聯軸器能量通用公式，導出內磁轉子在軸向偏移和徑向偏置下產生的回復力計算方法，周向傳動轉矩計算方法，結合試驗結果，總結推薦磁力泵磁鋼軸向長度、周向長度、徑向厚度、磁極數設計方法。
  14. Finally, to meet the fact, the paper also analyses a new drive scheme theoretically, in which the switched reluctance motor with y winding connection is excited by three wires. this paper woks over the calculation of switched reluctance motor magnetization curve and its analysis of static performance. the torque ripple reduction is the emphases

    本文對開關磁阻電機磁化曲線的計算、穩態性能分析、轉矩脈動的減小，提出了相應的解決方法，對于開關磁阻電機的性能分析、實時控制、新型驅動和開發研製都有一定的理論和應用價值。
  15. Upon those theory studies, under the simulation environment of adams software, the 3 - d virtual prototype model was simulated according to actual gorilla robot “ gorobot ”. and in simulation studies, this paper realized biped steady dynamic forward - walking, upstairs and downstairs biped walking, walking mode shifting and rationality of the method for pattern generation was validated in this paper. by the simulation, the curves of joints drive torque and ground reaction force for landing - foot were gained

    基於上述的理論，在模擬軟體adams的環境下對類人猿機器人「 gorobot 」模擬實現了雙足前向穩定動步行，雙足上下臺階，步行方式動態轉換過程，從而驗證了本文的步行樣本生成方法的正確性和合理性;通過模擬得到的關節力矩曲線、著地腳的地面反力曲線等模擬結果驗證了機器人步行和步行方式轉換的能力。
  16. The two kinds of joint connection half - rigidity characteristic about gabled frames are discussed. the criterion among rigid connection, zero rigidity connection, half rigidity connection is determined ; the joint ' s moment and rotation angle curve is analyzed ; the calculation method about joint initial rigidity is brought forward ; the ultimate moment ' s calculation formula is deduced ; the result calculated by the formulas is compared to one calculated by the norm ' s formulas

    探討了門式剛架兩種端板節點連接的半剛性特性，確定了節點剛接、鉸接和半剛接劃分的標準；分析了節點受力時的彎矩轉角曲線關系；提出了節點的初始剛度的計算方法；提出了節點極限彎矩的計算公式，並與規范關于節點抗彎承載力計算的結果進行了比較。
  17. Presents a new method of path mechanism synthesis which is based on coupler - angle curves moment invariant and is an improvement on the path synthesis method of planar linkage by coupler - angle curves

    摘要提出了一種新的軌跡機構綜合方法，該方法對利用連桿轉角曲線綜合軌跡機構方法作了較大的改進，提出基於連桿轉角曲線不變矩的軌跡機構綜合的神經網路方法。
  18. The count method of the pressure ability and torque ability of crank press has been introduced with the relation of the two kinds ability of the crank press and force - angle curve gained by analyzing and computing the data of ja21 - 18 crank press ability

    摘要介紹了曲柄壓力機的壓力能力、扭矩能力的計算方法，並通過對ja21 - 18型曲柄壓力機的能力分析計算，得出此種壓力機兩方面能力分別與力轉角曲線圖的關系。
  19. Through theoretically analyzing of moment - rotation curve of connection and seismic ductility of structure, the paper summarizes four parameter moment - rotation curve model and ductile designing methods

    對節點的彎矩?轉角曲線及結構的抗震延性進行理論分析，總結了四參數的彎矩?轉角模型和延性設計方法。
  20. This paper, by means of experimental study and finite element analysis, investigates the behavior of the extended end - plate connections under static loading, cyclic loading and moment - rotation curves. the main scopes of this paper includes : 1

    本文通過試驗研究及有限元分析，對節點的受力性能、抗震延性和彎矩?轉角曲線等方面進行了研究，主要內容包括： 1
分享友人
分享到 Line

分享到臉書