進料特性 的英文怎麼說

中文拼音 [jìnliàotèxìng]
進料特性 英文
feedstock characteristics
  • 進 : 進構詞成分。
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 特 : Ⅰ形容詞（特殊; 超出一般） particular; special; exceptional; unusual Ⅱ副詞1 （特別） especially; v...
  • 性 : Ⅰ名詞1 （性格） nature; character; disposition 2 （性能; 性質） property; quality 3 （性別） sex ...
  • 特性 : characteristic（s）; character; performance; features; properties; behaviour; response; character...
  1. Road wheel in this paper is created according to gb / t 3487 - 1996 and application of load is simulated the actual situation. msc. patran finished is used to build model of road wheel, divide finite element graticule, apply boundary load, and define material properties, which are submitted to msc. nastran to analyze strength

    本文所使用的車輪是按照輪輞的國家標準而構建的，而載荷的加入是模擬實際情況而添加的，在此基礎上，運用msc . patran ，完成車輪幾何建模，有限元網格劃分，邊界載荷的加入，材料特性的定義，再提交到msc . nastran中進行強度分析。
  2. Road wheel in this paper is created according to gb / t 3487 - 1996 and application of load is simulated the actual situation. ansys finished is used to build model of road wheel, divide finite element graticule, apply boundary load, and define material properties, which are submitted to ansys to analyze strength

    在車輪的構建上，本文採用了三維繪圖軟體ug ，在ug中首先完成車輪幾何建模，然後導入到ansys裏面進行修改並進行有限元網格的劃分，邊界載荷的加入，材料特性的定義，對車輪進行強度分析。
  3. Through studies of material characteristics suitable for making semiconductor laser heat sinks, we have manufactured panel heat sinks, large - channel heat sinks and micro - channel heat sinks

    通過對適于製作半導體激光器熱沉的材料特性進行研究，製作出平板熱沉、大通道熱沉及微通道熱沉。
  4. The effect of cutting speed, cutting thickness, cutting knife and materials on the working power capacity is discussed. finally tractive property of road plane milling machine is also studied. through the comparison of the results of theory calculation and experimental results the equation of working power capacity of milling machine is modified

    本文對冷式瀝青路面銑刨機的動力學工作過程進行了理論分析與試驗研究，並利用金屬材料切削的基本原理，研究了主切削力，並從能量轉化守恆的角度推導了銑刨機銑刨作業阻力和功率計算公式，討論了機器切削速度、銑刨厚度以及刀具與材料特性對銑刨作業阻力和功率的影響規律，最後討論了銑刨機牽引性能，且通過試驗研究驗證了銑刨作業阻力和功率公式。
  5. The paper introduced their architectural investigation and practice on the aspects of architectural tectonic, relation between tradition and creativity, the molding of place and construction of architectural space etc. such as david chipperfield ' s value of architecture ' s initial meaning and physicality, his emphasize on the architectural experience quality and ethics duty of the architect, and his view on the continuation of tradition and creativity ; waro kishi ' s value of tectonic noumenon, his concept of " industrial vernacular ", his application of the " architectural promenade " principle, and application of courtyard ; tod williams & billie tsien ' s principle of " architecture is combination of work and life ", their value of place, their observation of material characteristic, and their " slow " principle on design, me thod, and sense perception. the paper also introduces the three architect ' s representative works and their design method

    介紹了他們在建築的建構、傳統與創新的關系、場所感的塑造以及建築空間的創造等方面所進行的理論探索與建築創作實踐，如大衛?謝潑菲爾德對建築內在意義及建築實體（ physical ）的重視、對建築的體驗品質和建築師的倫理責任的強調、對傳統和創新的可持續性的認識；岸和郎的對建構本體的重視、關于「工業鄉土性」的概念、對「建築的漫步」理念的運用、以及對庭院空間的運用；托德?威廉姆斯和比麗?錢的「建築是工作和生活的結合」的基本設計理念、對場地的重視，對材料特性的探索、以及關于設計、方法、感知方面的「緩慢」的理論。
  6. The characteristic of chemical grouting material should combind with construstion method directed by the theories, it is necessity guarantee for the good result in some special cases. by cw series material, various complicated engineerings have been successfully handled, such as the treatment of concrete fine cracks in three gorges project ( tgp ), foundation reinforcement to the fault in in three gorges project ( tgp ), and the seepage control and reinforcement for the dam base of jiangya hydropower - station. these illustrations are provided to proof the advantages of modified epoxy resin and its technique

    化灌材料特性與理論指導下的灌漿工藝的全面結合是化灌處理，特別是特殊條件下灌漿效果的必要保證， cw系改性環氧化灌漿材及技術對多種復雜工況工程處理對象成功處理，解決了三峽混凝土微細滲水裂縫防滲補強、三峽工程地質斷層泥化夾層加固以及江埡電站壩基溶蝕帶防滲等一系列工程技術難題，印證了該材料及技術的先進性。
  7. Then, analytical work was carried out as follows : the ultimate analysis and physi - chemical analysis of the pyrolytic oil comprised a sketch of the fuel properties of the oil ; then, through the distillation analysis of the oil, the fraction composition of the " unrefined " oil was known. after that, a general knowledge of the aromaticity and saturation of the hydrocarbons in the oil was provided by the outcome of the ft - ir functional group analysis. also, from the analysis, the form of the polar functional groups and their distribution in different fractions of the oil were learned

    文中首先對不同熱解溫度下熱解油產率進行分析討論，然後，針對熱解油品質進行了一系列分析：通過元素組成和理化特性的分析，對熱解油作為燃料特性有了一個大致了解；通過實沸點蒸餾分析，得到熱解油作為一種未提煉油的餾分分佈，並為后續熱解油餾分的細入分析提供了前提；通過對熱解全油和各窄餾分的ft - ir官能團分析，對熱解油的芳香性、不飽和性有了整體的了解，並且清楚了熱解油中的極性官能團存在型式及其在熱解油不同餾分中的分佈。
  8. Abstract : the air / fuel ratio control scheme in common use of boiler auto - burning system is introduced summary. two kinds of scheme improved to obtain the best air / fuel ratio and to raise dynamic characteristic are analyzed in particular. further how to correct measures on air / fuel ratio when changing boiler load and fuel composition is proposed and analyzed

    文摘:對鍋爐自動燃燒系統中空氣/燃料比控制的常用方案進行了簡要介紹，著重分析了兩種為獲取最佳空氣/燃料比和提高控制系統動態特性而採取的改進方案，並針對鍋爐負荷變化和燃料特性改變對燃燒狀況的影響，進一步對空氣/燃料比的修正措施進行了分析與探討，提出了綜合修正方案。
  9. The arrangement of the monomers-controllable during the polymerization process-gives the material the characteristics we need.

    在聚合過程中進行人為控制，使單體的排列方式能給出人們所需要的材料特性。
  10. Theoretically several solutions are derived in the final scheme such as broadband matching technology which included negative - feedback technology, traveling wave technology and balance technology. in addition, the design will be optimized by eda software and the final test result indicates that our design is successful. the principle of microwave amplifier is introduced at first in this paper, especially its main parameters index sign, then the material performance and the influence of parasic parameter and model setting of the gaas phemt is discussed

    文中首先介紹寬頻帶放大器的主要參數指標，接著介紹了gaasfet的材料特性，以及phemt管芯寄生參數對實際放大器設計的影響，然後討論gaasphemt的大、小信號模型的建立與分類;結合gaasphemt模型和s埠參數分析了寬頻帶匹配技術的原理;最後論述本課題中各個放大器實現的具體方案，以及在放大器實現過程中應該注意的問題，給出了實際寬帶放大器的測試結果，並將軟體模擬結果與實測曲線進行對比。
  11. The strength of harden material is high, and the properties of this materials and the repairing techniques are advantageous to that of the others. by theoretical exploration on mechanism of permeation, investigate the movement regulation of the material in the object be treated. that make grouting technolgy can be suported by theories : absorb - permeate mechanism of the liquid in the soil proceed to experiment, intermittent grouting method was made according to the result of experiment ; establish the proliferation control theories model of modified epoxy resin in the not even crack system ; to match between material characteristic and craft, to reach the goal of construction in the special and complicated cases, can be directed by the theories

    通過對漿材在工程處理對象中的滲透擴散機制的理論試驗探討，探索漿材在處理對象中的運動規律，使化灌工藝技術得到理論支撐：對低滲性粘性土中漿液的吸滲機制進行試驗研究，並據此確定間歇式灌漿的工藝措施；建立改性環氧漿材在非均勻裂隙體系中的擴散控制理論模型，並運用材料特性、工藝的科學配合，達到化灌理論指導特殊復雜條件下施工的目的。
  12. Second, on the numerical arithmetic of the quench - induced residual stresses ground, the quenching process of 7075t73 aluminum plate is simulated, the effect of material characteristics along with the plate temperature varying in quenching is considered, and on conditions of the different water temperature and different plate thickness, the quenching processes are compared

    2 、建立了航空鋁合金板材淬火過程的彈塑性力學模型，對航空鋁合金板材溫度場與應力場進行了數值模擬，模擬過程考慮了材料特性隨溫度變化的影響，並對不同的淬火影響因素進行了分析。
  13. The main work of this paper is establishing the 3d model of the whole bus body and implementing the strength analysis, stiffness analysis, modal analysis and road surface spectrum analysis, synthesized considering the geometric properties, physical properties, material properties. the appraisal to the mechanics performance is produced. the suggestion of the structure improvement is put forward based on the analysis result and is adopted by nanjing iveco company

    本文主要工作是綜合考慮對象的幾何特性、物理特性、材料特性，進行了整車三維數模的建立;實現了nj6826tmf車的車身強度分析、剛度分析、固有頻率振型分析和路譜分析，在結構的力學性能上給出了相應的評價;根據分析結果，提出結構改進建議，並得到南汽的采納;對該車的超重問題，以輕量化為目標，提出使nj6826tmf輕量化的設計方案，供南汽參考。
  14. The principle of the predigestion in geometry modeling is omitting the function part and the non - load - carrying process structure, and to the big and transition arc, the curve is replaced by straight line using the thought of curve and free - surface segmentation. the physical characteristic of the digital model reflect on remaining the main mechanical characteristic of the objects. the shell element model is used in strength analysis, stiffness analysis and dynamic analysis

    文中幾何建模的簡化原則是，略去功能件和非承載的工藝結構，對于大圓弧和過渡圓弧，以曲面分塊和曲線分段的思想進行適當的以直代曲;數模的物理特性反映在最大限度地保留對象的主要力學特性;在強度、剛度和動態分析中採用殼元模型，輕量化設計中採用梁元模型;材料特性根據所用材料定義其主要性能參數。
  15. The calculated results show that the stability safety factor calculated by considering progressive failure is less than that obtained by common theory, and the effect of material characteristics on the slope stability that considered progressive failure is obvious

    考慮殘余強度時的漸進破壞分析所求出的穩定性安全系數比理論上求出的最小穩定性安全系數要小，而材料特性對安全系數的影響在考慮殘余強度時比較明顯。
  16. At the same time, the structure and the condensation mechanism of the natural down fiber are analyzed, the cold wind environment test on the warmth instrument which is designed as a warmth man was simulated and the thermal properties were measured on it successfully. by analyzing and discussing of those test data, the influence factors of the component fibers and the proportions of the natural down fiber in the felt under the wind cold environment were discovered, the influence trend to the warmth property of the different wind speed were tested and compared each other when the ptfe film lamination fabrics was applied or not

    本文在總結分析了國內外風冷環境條件下保暖材料的保暖機理及材料特性后，提出了採用羽絨纖維與ptfe膜復合加工高保暖性材料的設計思路。對ptfe膜、 pu膜及ptfe pu膜的透濕性進行了比較；探討分析了羽絨纖維的結構及成氈機理；對暖體假人進行了模擬風冷實驗研究。在此基礎上，分析總結了不同的材料、不同的羽絨含量對保暖絮氈保暖性的影響程度；在風冷環境下，比較了風速對有ptfe膜絮氈及無ptfe膜絮氈保暖性的影響。
  17. In this dissertation, structure and material property of piezoelectric laminated shell, construction of analytical model and finite element model, satisfactory reduction of dynamic model ' s order, satisfactory control of vibration, genetic optimization of sensor / actuator units " disposition, system synthesis method and its software realization, are discussed and some useful conclusions for the application are acquired

    本文圍繞著壓電層合殼的結構與材料特性、解析模型與有限元模型的構造、數值模擬結果的分析、動力學模型的滿意降階、振動的滿意控制、傳感作動單元位置的遺傳演算法優化、系統設計方法及其軟體實現等諸方面的問題進行了研究與探討，並取得了一些可供應用參考的結論。
  18. In the paper, concrete is taken as three phases composites consisting of aggregate matrix and bond between matrix and aggregate on meso - level. using monte - carlo method, the positions of the aggregate structures are generated. mesh is projected on them, different material properties are assigned to the respective elements according to element location in individual phase

    應用蒙特卡羅方法，在平面上隨機地確定骨料的位置，產生出隨機骨料結構，並進行網格自動剖分，根據其空間位置確定各單元所屬的相，分配相應的材料特性給相應的單元，用以代表骨料、砂漿及兩者之間的過渡層。
  19. Based on the materials properties of rolled compacted concrete dam, three - dimensional finite element relocating mesh method is used to simulate the temperature field of a rcc arch dam from construction to operation period

    摘要依據碾壓混凝土壩的材料特性，採用三維有限元浮動網格法對某碾壓混凝土拱壩施工期至運行期溫度場進行了全過程模擬分析。
  20. According to shape, dimension, precision and material characteristic and other requests of work pieces for machining, designs the function layout and analyzes the collectivity capability of the bench - type ultra - precision five - axis numerical control milling machine

    本文首先根據加工工件形狀、尺寸、精度、材料特性等實際使用要求，對臺式五軸聯動超精密數控銑床進行了功能規劃和總體性能分析。
分享友人
分享到 Line

分享到臉書