鉆孔結構 的英文怎麼說

中文拼音 [zhēnkǒngjiēgòu]
鉆孔結構 英文
hole structure
  • 鉆 : 鉆Ⅰ名詞1. （打眼用的工具） drill; auger 2. （指鉆石） diamond; jewel Ⅱ動詞（用尖物在另一物體上轉動） drill; bore
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 構 : Ⅰ動詞1 （構造; 組合） construct; form; compose 2 （結成） fabricate; make up 3 （建造; 架屋） bui...
  • 結構 : 1 （各組成部分的搭配形式） structure; composition; construction; formation; constitution; fabric;...
  1. A new pbg cover formed by digging air holes in the material is studied. lt is easier to be fabricated compared with the structure reported before

    與文獻所報道的矩形氧化鋁棒結構相比，這種新的覆層結構由於採用了介質內鉆空氣孔的形式更容易加工實現。
  2. 224 drillholes, 250 trial pits, refurbishment of 48 existing standpipes piezometers, laboratory testing of soil and rock samples obtained from the investigation works and the structural condition survey on existing highway structures along tuen mun road

    224個鉆孔， 250個探井，重整48個豎管測壓計，將所取得的土壤和巖石樣本進行實驗室試驗，以及對屯門公路上現有的公路建築物進行結構狀況勘測。
  3. By the check - out, inspection and measurement to start construction the industrial art to this test pile with the examination between stake body mass and bearing power, made sure the stroke reasonable operation method drilling under the dissolved cavern geology term ; the pier foundation loading test expressed the lading and rub the lading that resistance drag a glazing for of relation, and to the borehole cast - in - place concrete pile in the karst terrain deliver with break the mechanism, the characteristic of bearing power, proceeding the spot test job of the full of result ; the test data expresses the stake side friction resistance to rises with a bat batch terminal friction resistance very important function, the of tip of pile resistance drag occupies the proportion very few

    通過對本次試樁施工工藝的檢測和樁身質量及承載力的檢驗，確定了沖擊鉆在溶洞地質條件下的合理使用方法；基樁承載實驗表明了荷載與摩擦阻力之間的關系，並對巖溶地區的嵌巖灌注樁的荷載傳遞和破壞機理、承載力特性，進行了富有成果的現場測試工作；試驗數據表明樁側摩阻和支盤端阻起很重要的作用，樁端阻力所佔比例甚少。這與設計樁基時的計算模式相差很大，承載力也較設計增加；使用力學數值分析方法和有限單元法，對鉆孔灌注樁樁端下的巖體強度和結構穩定性方面進行模擬計算和定量研究。
  4. Tta for construction of bored pile and substructure of bridge c7

    橋鉆孔樁及下層結構的臨時交通管理措施
  5. In the paper, the repack method of the machine tool, the structure characters and the principle of the vibrative gun drill are introduced

    本文通過生產實踐較詳細地介紹了用振動槍鉆加工深孔時的機床改裝、槍鉆結構特點及振動鉆削的機理。
  6. Special thermowell is manufactured from drilled bar stock to withstand pressure morethan 6. 4mpa, together with convenience in installation for movable connector

    特製套管帶活動連接頭，安裝方便，整體鉆孔縮徑式套管結構，耐壓6 . 4mpa
  7. The structure of the modern woodwork, processing quality has proposed higher demand to the wood processing equipment, for instance : wooden tenon position public errand, hole of interval, modes in chinese operatic music of furniture must high many rows of drill is it realize to come very by precision, panel unloading to is it realize to come by accurate person who cuts out board, is it is it is it is it sharpen by accurate numerical control machining center is it realize to come to mill to process to pare to milling extremely high of imitating etc.

    現代建築裝飾及家具行業的發展與加工設備是休戚相關的。現代木製品的結構加工質量對木材加工設備提出了較高的要求，如：板式傢具的木榫孔間距的位置公差必須由精度很高的多排鉆來實現，板材下料是由精密裁板機來實現，仿型極高的銑削加工是由精密數控銑削加工中心來實現的。
  8. Bored pile - jet grouting supporting structure

    鉆孔灌注樁與噴射注漿組合支護結構
  9. A patch antenna with air holes in the substrate has been designed. the finite - difference time - domain ( fdtd ) method together with the perfectly matched layer ( pml ) boundary treatment has been used to study the performance of the antenna. it is shown that the surface waves are significiently suppressed, the frequency bandwidth is improved, the sidelobe levels are reduced and consequently the gain in the forward direction is improved by 14 db ( about 4 db higher than the value reported previously )

    設計了一種基底鉆周期圓孔結構的電磁（光子）晶體貼片天線，用fdtd方法並結合pml吸收邊界條件對該天線進行了研究，結果表明本文所設計的基底鉆孔型電磁晶體貼片天線取得了多方面的性能改善，與普通天線相比，基底中的表面波受到很大抑制，天線的帶寬增加，遠場方向圖上天線的旁瓣和背瓣被明顯削弱，向前輻射的增益由原來的12db增加到26db ，增加了14db ，比文獻上報道的gonzalo等人的研究結果提高了4db 。
  10. However the machining of light - composite armor material is still a dead - hand problem to be resolved, and so, this dissertation analyses and researches the mechanical - physics performance, the tissue - structure characteristics and the machining mechanism of light - composite - armor material ( fiber - reinforced polymer - based composite and defense - bullet ceramics ) ; researches the machining technology of light - composite - armor material, developing the special cutters and special clamps. researches the machining technology of light - composite - armor after molding, mainly resolving the drilling a hole and cut a straight - line of defense - bullet ceramics / fiber - reinforced polymer - based composite. using the machining tools, which mainly include multiple - tools machining fiber - reinforced polymer - based composite holes and diamond saw - blade, diamond hole - drills machining defense - bullet ceramics and so on, researched in this dissertation, the machining - experiment of composite, defense - bullet ceramics and ceramics / composite was carried through, and good machining result was gained

    然而，輕質復合裝甲材料的加工仍是一個亟待解決的問題，為此本課題分析研究了輕質復合裝甲材料的物理機械性能、組織結構特點和加工機理，即：維增強聚合物基復合材料和工程陶瓷；研製了輕質復合裝甲材料加工所用的專用工裝，主要包括專用刀具和專用夾具；研究了輕質復合裝甲成型后的加工技術，主要解決了工程陶瓷復合材料板的鉆孔和直邊切割加工；利用所研究的加工纖維增強聚合物基復合材料臺階孔用的復合刀具、切割直邊用的金剛石釬焊切割鋸片、加工工程陶瓷用的金剛石套料鉆、切割工程陶瓷復合材料板用的金剛石切割鋸片等加工刀具對纖維增強聚合物基復合材料和工程陶瓷，以及工程陶瓷復合材料板進行了加工實驗，並取得了良好的實驗效果。
  11. 4 rig structure is separate group design, it assures good disassembility, rapid and convenient mount and transport, best working environment and lower labor strength as well as remote control and operation

    5鉆機結構為分體式，可拆性好，搬遷安裝訊速方便並可遠距離操縱，一次搬遷完成多孔施工操作員工工作環境好，勞動強度低。
  12. 4 rig structure is separate group design, it offers good disassembility, rapid and convenient mount and transport, better working environment and lower labor strength as well as remote control and operation

    4鉆機結構為分體式，可拆性好，搬遷安裝訊速方便並可遠距離操縱，一次搬遷完成多孔施工操作員工工作環境好，勞動強度低。
  13. 4 rig structure is separate group design, it assures good disassembility, rapid and convenient mount and transport, better working environment and lower labor strength as well as remote control and operation

    4鉆機結構為分體式，可拆性好，搬遷安裝訊速方便並可遠距離操縱，一次搬遷完成多孔施工操作員工工作環境好，勞動強度低。
  14. Rig is already widely used in various projects such as water power stations situated in yunnan, guangxi, sichuan, guizhou and hubei provinces, and expressways as well such as ninbo - taizhou - wenzhou in zhejiang, huangshan - hangzhou in zhejiang, dali - baoshan in yunnan

    二鉆機特點1鉆機結構為分體式，可拆性好，搬遷安裝迅速方便可遠距離操縱，操作員工作環境好。一次搬遷完成多孔施工，勞動強度低。
  15. This thesis preliminarily researched drilling technology of applying foaming dth hammer into hydrology and waterwell drilling beginning with analyzing foaming dth hammer ' s structure characteristics and working principle and joining together with the indoor experiment with respect to the fitting of drilling equipments, designing of grouting system, selecting of drilling program parameters and so on

    從分析泡沫潛孔錘的結構特點和工作原理出發，結合室內實驗，在鉆進設備的配套、灌注系統的設計、鉆進規程參數的選擇等方面，對泡沫潛孔錘應用於水文水井鉆探的鉆進工藝進行了研究。
  16. The quantification indexes that token weathered degree are primary velocity, borehole rqd ( rock quality designation ), joint space, joint number and so on, and the unloading ones are primary velocity, joint opening, borehole penetrability and so on. the compartmentalization of different weathered and load - off zones according to quantification indexes tallies with the slope geo - stress computed by finite element method

    其中研究風化分帶的定量指標有縱波速vp 、鉆孔rqd 、結構面間距與條數等，研究卸荷分帶的定量指標有縱波速度、節理開度與鉆孔巖體透水性，據此劃分的不同程度風化、卸荷巖體與有限元計算的壩區河谷應力場具有良好對應性。
  17. The performance of the pbg antenna using the new pbg cover together with a pbg substrate is studied by the fdtd method together with the pml boundary treatment. the numerical results show that a more focused beam radiated in the broadside direction is achieved. the gain of the pbg patch antenna in the forward direction is improved by about 6 db. the radiation directivity is improved significantly and reaches 11. 5 db, which is 0. 4 db less than the maximum value that is allowed physically for this size of the antenna ( this difference is about 4. 1 db less than the difference achieved by thevenot et al.,

    用fdtd方法並結合pml吸收邊界條件，我們對加了這種新的覆層結構並且基底鉆孔的復合結構電磁（光子）晶體貼片天線的性能進行了研究，結果證明加了這種新的電磁晶體覆層結構以後，天線的波束收攏很多，並且向前輻射的增益大大提高，與普通天線相比，天線的e面和h面方向圖上向前輻射的增益均提高了約6db ，另外，該復合結構天線的方向性系數達到了11 . 5浙江大學博士學位論文db ，與該物理尺寸天線的方向性系數的理論極限值（ 11 . 9db ）相差0 . 4db ，該差值比thevenot等人設計的電磁晶體覆層天線的相應差值減少了約4 . 1db ，比qiu等人設計的電磁晶體天線的相應差值減少了約1
  18. Under the function of big pressure and dynamic load, the grains may be moved which may cause the soil body distortion. at present, the relatively ripe methods of drill in gravel layer are mostly double - wall drill pipe reverse circulation drilling, auger stem breast wall drilling and down - the - hole hammer follow down drilling

    論文根據jsl ? 30型礫石鉆機潛孔錘同心跟管鉆具結構，採用程序計算得到了鉆桿內各深度處壓力分佈、鉆頭壓力降、環形空間壓力分佈及空氣流速分佈。
  19. Observation of drilling cores and casting - sections and the characters of pore structures and permeability of the matrix of the lower - ordovician carbonate in comparing with the lower limit of a reservoir for matrix reveal that the porosity, permeability, maximum pore diameter, saturation and median throat diameter in the matrix with undeveloped fissures, holes and solution pores are far lower than those of a reservoir limit although some micro - pores are developed in the matrix which therefore has no capacity of storing and producing oil - gas

    摘要通過鉆井巖心和鑄體薄片觀察，根據下奧陶統灰巖基質的孔滲特徵和孔隙結構特徵，並與基質作為儲層的下限對照裂隙、洞穴和溶蝕孔洞不發育的灰巖基質，發現盡管有微孔隙的發育，但其孔隙度、滲透率、最大孔喉半徑、飽和度、中值喉道半徑等參數值遠低於儲層下限值，基本不具備儲集和生產油氣的意義。
  20. Wear - proof body is manufactured from bar stock of high temperature alloy. double - compound structure of wear - proof coated with double wear - proof layer prolongs service life

    耐磨頭本體採用耐高溫合金鋼棒料整體鉆孔，外噴焊雙層耐磨層，形成雙重復合結構，延長耐磨熱電偶的使用壽命。
分享友人
分享到 Line

分享到臉書