鑄造型面 的英文怎麼說

中文拼音 [zhùzàoxíngmiàn]
鑄造型面 英文
cast profile
  • 鑄 : Ⅰ動詞（鑄造） cast; coin; make Ⅱ名詞1. （古國名） zhu, a state in the zhou dynasty2. （姓氏） a surname
  • 造 : Ⅰ動詞1 （做; 製作） make; build; create; produce 2 （假編） cook up; fabricate; concoct 3 [書面語...
  • 面 : Ⅰ名詞1 （頭的前部; 臉） face 2 （物體的表面） surface; top 3 （外露的一層或正面） outside; the ri...
  • 造型 : 1 （創造物體形象） modelling; profiling; mouldmaking 2 （創造出來的物體形象） model;mould3 [機械...
  1. A detailed introduction was made to the properties of the wet coated sand suitable for multi - station shell mould shooting machine ; the development of a sort of high strength coated sand with low resin content : the shaping index and wetness adjusting process : analysis and prevention of peel back defect of shells made with overturning hopper process ; test method of peel back resistance of coated sand : pinhole defect analysis of high ni ductile iron shell mould castings and application of anti - pinhole coated sand

    詳細介紹適用於吹砂式多工位殼型機的濕態覆膜砂性能；高強度低樹脂量覆膜砂的研製；濕態殼型覆膜砂的成形性指數與調濕工藝；翻鬥法制殼時的脫殼問題分析和解決辦法；覆膜砂脫殼性檢測方法；高鎳球鐵件殼型鑄造表面針孔原因分析與抗針孔覆膜砂的應用。
  2. Some testing devices are of advanced ones, such as scanning electronic microscope, microfocus circular radioscope, water - immersed ultrasonic flaw detector, 3 - axis measuring machines, large - sized projector, etc. for the production of non - aero products, there are large - sized die - casting equipment, and nearly 100 pieces of specialized gear machine tools including worm - gear grinding machine, etc. it has some specialized production lines for piston, crankshaft, cylinder and housing, etc., as well as 4 flexible production lines advanced at home for motorcycle engine, and a complete set of automatic inspection test eqiuipment for motorcycle engine

    計算機輔助設計輔助加工技術正在普遍使用。在非航空產品生產方面有大型壓鑄設備殼型鑄造，包括鍋桿輪磨在內的輪專用機床100多臺，以及活塞曲軸汽缸殼體等專業化生產線。此外，還建成了具有國內領先水平的4條摩托車發動機柔性生產線，以及成套的摩托車發動機檢測設備，可進行測試數據分析，改進檢定測試方法等。
  3. Founding - visual examination of surface discontinuities - steel sand castings

    鑄造.表面非連續性的目視檢驗.鋼砂型鑄造
  4. Research and application of the clp - 7 differential - pressure casting fluid surface forcing control system

    7型差壓鑄造液面加壓控制系統
  5. The results show that the heat preservation coating and its proper thickness are favorable to the enhancement of filling mold speed of aluminium alloy ; the higher the pouring temperature is and the larger the ratio of hollow areas of vertical pouring is, the faster the speed of filling mold of aluminium alloy is ; if the mold is too thick or too thin, it may decrease the speed of filling mold ; the proper length and the area of vertical pouring are favorable to the enhancement of the speed of filling mold ; although negatire - pressure may improve filling the speed, too high negatire - pressure may enlarge the flaw in casting

    結果表明：保溫塗料及一定的塗層厚度有利於提高鋁液的充型速度；澆注溫度越高、直澆道空心面積率越大，鋁液充型速度越快；模樣厚度太厚或太薄，均會使鋁液充型速度降低；一定的直澆道長度及直澆道面積有利於提高鋁液的充型速度；施加負壓會使鋁液的充型速度大大提高，但負壓過大會增大鑄造缺陷。
  6. Rapid prototyping technology changed the traditional pattern of product design, which could offer product sample for the designer, reduced design cycle and quicken the schedule of new product design, and it gave the decision - makers visual feeling. ; rp technology provided kinds of molds including resin - boncled mold laminate mold, investment mold and lost foam casting mold and so on for sand casting investment casting and cavityless casting, it could also use direct shell production casting to make pattern dies metal dies die - casting dies injection dies directly, and it could even produce casting products in small scales. the applications of fdm technology in plaster precision casting and the rapid casting technology based on sls technology were introduced, the organic combination between rapid prototyping tecnnology and foundry process, which initiated a new period of rapid manufacturing metal parts, by using advanced new technology alternated traditional foundry industry to make it looked brand - new, thus, the competition of foundry industry would be improved ; rapid prototyping technology offered a rapid economical feasible technical method, common processes of using rapid prototyping technology to produce dies were discussed, in the paper it explored that. the problem of combining rapid prototyping technology with electric arc metal - spraying technology to make metal dies and technics in dies manufacturing of combining rapid prototyping technology with precision casting, rapid tooling based on rapid prototyping, integrated advanced new technology and tradition technology of rapid prototyping manufacture, each superiority were exerted, rapid prototyping technology had been an efficiency measure to rapid update products and develop new product, and to middle -

    快速成型技術改變了傳統的產品開發模式，可以為設計者提供產品樣件，縮短設計周期，加快新產品的開發進度，為決策者提供直觀性；快速成型技術迅速提供砂型鑄造、熔模鑄造、實型鑄造用的各種模樣，包括樹脂模、層壓模、熔模和消失模等，還可採用直接制殼鑄造法直接製造熔模鑄造用的壓型、金屬型、壓鑄型、注塑模，甚至直接製造小批量鑄件，介紹了熔積成型技術在石膏型精密鑄造上的應用和基於選擇性激光燒結技術的快速鑄造技術，快速成型技術與鑄造工藝的有機結合，開創了快速製造金屬零件的新階段，對用高新技術改造傳統的鑄造工業，使其面貌煥然一新，增強鑄造行業的競爭能力；快速成型技術為母模的製造提供了一條快速、經濟、可行的技術途徑，討論了利用快速成型技術製造模具的一般工藝方法，探討了將快速成型技術與金屬電弧噴鍍技術結合起來快速製造金屬模具問題，以及快速成型技術與精密鑄造技術相結合的模具製造工藝，基於快速成型製造的快速模具技術，集成了快速成型製造高新技術和傳統技術，發揮各自優勢，已成為產品快速更新換代和新產品開發及中、小批量生產的有效手段之一。
  7. Casting technology : green sand casting, resin bonded sand casting, permanent mold casting gravity casting, centrifugal casting, low - pressure casting, etc

    鑄造工藝方面具備粘土砂鑄造樹脂砂鑄造金屬型重力鑄造離心鑄造低壓鑄造等
  8. This machine fits for mixing moulding sand in large scale and medium scale foundry workshop, as well as system sand for machine moulding, fired mold sand, self - hardening sand, face sand and core sand, also fit for mixing different powder materials for industries of glass, porcelain and fireproofing materials

    該機主要用於大中型鑄造車間型砂的混制，既可混制機器造型用的單一砂，又可混制干模砂自硬砂面砂和芯砂，也可用於玻璃陶瓷耐火材料等行業混制各種粉粒狀物料。
  9. The results show that, composite could be fabricated on the complicated surface by means of sodium silicate sand mold combination with vacuum infiltration process. when the substrate was 10 mm, composite layers reached 3 mm to 5 mm in thickness with high strength interface and less casting defect. microstructures of grey cast iron and low chromium cast iron matrix composites with various volume fraction has been analyzed

    結果表明：用水玻璃砂型（芯）加負壓鑄滲的工藝能夠實現復雜表面（曲面）顆粒增強復合材料的制備，澆注方式簡單可靠，基材厚度在10mm時，復合層厚度能達到3 5mm ，且復合層鑄造缺陷少，復合效果好，界面緻密而且結合強度高。
  10. We adopted advanced technology of semi continuous casting, where ingots are milled and heated, then rolled in the 1500 mm hot - rolling mill and 1400 mm cold - rolling mill

    本廠採用先進的半連續鑄造工藝鑄錠經銑面加熱通過大型1500毫米熱軋機。 1400毫米冷軋機。
  11. Founding - visual examination of surface discontinuities - steel sand castings ; german version en 12454 : 1998

    鑄造.表面缺陷的目視檢驗.鋼砂型鑄件
  12. Abstract : according to the general development trendency of the foundry technology and the recent research progreses of coating, developing trend of the sand mould coating is discussed in respects of the types, properties and quality control of the coating

    文摘:根據鑄造技術總的發展趨勢及塗料的最新研究進展，從未來塗料的品種、性能、塗敷方式及品質控制等幾個方面論述了砂型鑄造塗料的發展趨勢。
  13. This series product fits for mixing facing sand and system sand in large scale or medium foundry workshop, as well as mixing core sand and self - hardening sand in large scale foundry workshop

    S11系列輾輪混砂機該系列產品主要用於大中型鑄造車間混制面砂和單一砂，也可用於大型鑄造車間混制芯砂和自硬砂等。
  14. Aimed mentioned above technique, an approach to coating constituents, spraying parameters and molding process is made for better resolving the main problem concerning self - hardening transferred coating application to bronge art casting

    從塗料組成、噴塗工藝以及造型工藝等方面進行探討，較好地解決了自硬轉移塗料在青銅藝術鑄造應用中的主要問題。
  15. Abstract : some important principles in the design of split box molding are discussed concerning the selection of mold joint ， the methods of location and the design of gating system. it has been proved in production that the principles discussed had great effects on the cost and quality of castings

    文摘:以床身為例，討論了劈箱造型工藝設計中的幾個重要原則：包括分型面的選擇、定位方法、分芯方法及澆注系統設計等；生產實踐證明，這些原則對鑄件生產成本和品質有重要的影響。
  16. Sand - removing of small and medium sizde castings, forgings, heat - treated pieces, steel plates, steel oipes, sections and steel structures, surface treatment before plating, cutting of rocks

    中小型鑄造件的清砂、鍛件、熱處理件、鋼板、鋼管、型鋼及結構鋼件的除銹強化、塗鍍、塗裝前的表面處理及石材切割。
  17. Verification regulation of green sand mould surface hardness tester for castings

    鑄造用濕型表面硬度計試行檢定規程
  18. Since the sand faced - iron mould has high rigidity, it is possible, when used for crankshafts production, to adopt feeder - less foundry method and increase the process yield, as well as increase dimension accuracy of castings and improve surface quality of castings

    由於覆砂鐵型剛度較高，用於球鐵件能實現無冒口鑄造，提高工藝出品率，並能提高鑄件尺寸精度，改善表面質量。
  19. The main properties of new alcohol based spraying coatings for green sand mold are superior to the abilities of internal and outside coatings of the same kind, the surfaces of castings that are produced used new alcohol based spraying coatings are smooth without adhering sand and gas - hore

    粘土濕型砂鑄造新型醇基噴塗塗料的主要性能達到了國內外同類產品領先水平；生產的高錳鋼、可鍛鑄鐵和灰口鑄鐵產品表面光潔，無粘砂、氣孔等缺陷。
  20. Abstract : based on sun workstation sparc20 ug software has been used in cad of full - mold casting tool of cylinder head of model n485q multi - cylinder diesel to solve knotty problems such as cut of pattern membrane of cylinder head. visibility of size of each part of cooperation of tools with mold cavity and, molding of complex curved surface. tool design thinking of full - mold casting of complex diesel castings has been explored

    文摘:採用基於5un工作站sparc20的ug軟體進行n485q多缸柴油機氣缸蓋實型鑄造模具的計算機輔助設計，解決了缸蓋模樣的模片切取、模具配合型腔各部位尺寸的可視化以及復雜曲面的造型等疑難問題，探索出了一條復雜內燃機鑄件實型鑄造的模具設計思路。
分享友人
分享到 Line

分享到臉書