陶瓷結合 的英文怎麼說

中文拼音 [táocíjiēgě]
陶瓷結合 英文
ceramic bond
  • 陶 : 陶名詞1. （窯） kiln2. （人名用字） a word used in person's name
  • 瓷 : 名詞（用高嶺土、長石、石英等燒製成的材料） porcelain; china
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 陶瓷 : pottery and porcelain; ceramics陶瓷地磚 floor tile; 陶瓷電子管 ceramic tube; 陶瓷電阻器 ceramic r...
  • 結合 : 1 （發生密切聯系; 聯合） combine; unite; integrate; link; binding; coalition; cohesion; connectio...
  1. This paper has emulated the complex process of bioceramic " s degradation by using the computer simulation technique and studying the principle of material " s degradation, and combining the grain growing model with material degradation model

    本文利用計算機模擬技術，在深入研究了生物陶瓷體內降解機理的基礎上，將晶粒長大模型和材料降解模型有機結合，用於模擬生物陶瓷的降解過程。
  2. Using in situ formation of ternary boride base cermets hard phases through chemical reactions and sinterbonding onto steel substrates though liquid sintering we successfully prepared a kind of ternary boride base cermet

    摘要通過化學反應將原料粉來生成三元硼化物硬質相併通過液相燒結燒與鋼很好的結合，用這種工藝成功地在鋼基體上塗覆了預壓制的三元硼化物基金屬陶瓷。
  3. The powder was pressed through molding and cold isostatic pressure, which increased the density and decreased the uneven distribution of stress inside the briquet to make the ceramic briquet equally compact

    粉料採取模壓和冷等靜壓相結合的方法壓制，增大了坯體內部的密度並減少了應力的分佈不均，得到均勻緻密的陶瓷坯體。
  4. To have outer cooling system though forced convection. exercisable processes : compressive sintering of cemented carbide and ceramic, moulding sintering in powder metallurgy

    實例：適合於硬質合金陶瓷件的加壓燒結，粉末冶金的成型燒結等。
  5. The damage of the transducer was avoided, so the ability of over - loading can be improved highly. in order to acquire a good hermetic seal between the diaphragm and the base plate, two sealing methods were used, namely, compound method and crystallite method

    通過試驗對比，確定了介質腔的厚度，使陶瓷膜片在過載時與基座接觸，從而避免了傳感器的過載損壞，使傳感器的抗過載能力大大提高。研究了復合法和結晶法兩種封接方式，使陶瓷基座與膜片達到良好的匹配封接。
  6. Technical features : utilizes advanced second sintering technology, and has world - advanced fully computerized multi - pipe spreading technology, compounding microlite glass to surface of vitrified tile, and organically blend through second high temperature firing, so the product achieves a higher level in strength, luster and surface crystal feeling

    技術特點：採用領先的二次燒結技術和具有國際先進水平的全電腦多管道布料技術，將微晶玻璃復合在陶瓷玻化磚的表面，經二次高溫煅燒有機融合於一體，令產品強度、光澤度與表面晶瑩質感達到另一個高度。
  7. Technical features : utilizes advanced second sintering techonlogy and has world - advanced fully computerized multi - pipe spreading technology. compounding microlite glass to surface of vitrified tile, and organically blend through second high temperature firing, so the product achieves a higher level in strength, luster and surface crystal feeling

    技術特點:採用領先的二次燒結技術和具有國際先進水平的全電腦多管道布料技術，將微晶玻璃復合在陶瓷玻化磚表面，經二次高溫斷燒有機融合於一體，令產品強度，光澤度與表面晶瑩質感達到一個高度
  8. With thermal spray technology, the surface of water wall tubes is easily covered by varied high performance coatings. in this paper, several new alloy and cermet coatings applied to water wall tubes were designed and their performance was studied according to the research item of hanchuan power station of hubei province " the study and development on the corrosion - resistant and wear - resistant coatings of water wall tubes in boiler "

    採用熱噴塗技術可以方便地在鍋爐管道表面獲得各種高性能的防腐耐磨塗層。本文結合湖北省漢川電廠的研究項目「鍋爐水冷壁管防腐耐磨塗層的開發研究」進行水冷壁管新型合金和金屬陶瓷復合塗層的設計和性能研究。
  9. The study of the vitrified diamond wheel

    陶瓷結合劑金剛石砂輪的研究
  10. With the material dynamic constitutive equation including damage and the effect of stain rate the predictable formula about ballistic limit velocity of fiber composite target. secondly based on the damage feature about ceramic / fiber composite target caused by impact load, analysis model about defense performance of ceramic / composite material target is formed and the predictable formula about ballistic limit velocity is also given. lastly using the reflection and projectile theory of stress wave the paper discusses the design of ceramic / composite material target, optimizes the design of double layer ceramic / composite targets, gains optimal coefficient under certain area density and discusses the variety relationship of area density and thickness with optimal coefficient u nder some ballistic limit velocity 3

    首先，分析了纖維類正交鋪層復合靶板在沖擊載荷作用下的損傷破壞機理，結合包含損傷和應變率效應的材料動態本構方程，建立了纖維復合材料板彈道極限速度的預測公式；其次，根據陶瓷/纖維材料復合靶板在沖擊載荷下的破壞特點，建立了陶瓷/復合材料靶板抗彈性能分析模型，給出了彈道極限速度預測公式；最後，利用應力波反射和透射理論討論了陶瓷/復合材料靶板的設計問題，對雙層陶瓷復合靶板的優化設計進行了分析，給出了在一定面密度下的最佳優化系數，討論了一定彈道極限速度下的面密度和厚度隨優化系數的變化關系。
  11. Vitrified force - honing stone

    陶瓷結合劑強力珩磨油石
  12. The factory mainly produces ceramic bonding agent, grinding apparatus of resin bonding agent

    主要生產陶瓷結合劑、樹脂結合劑磨具。
  13. However the machining of light - composite armor material is still a dead - hand problem to be resolved, and so, this dissertation analyses and researches the mechanical - physics performance, the tissue - structure characteristics and the machining mechanism of light - composite - armor material ( fiber - reinforced polymer - based composite and defense - bullet ceramics ) ; researches the machining technology of light - composite - armor material, developing the special cutters and special clamps. researches the machining technology of light - composite - armor after molding, mainly resolving the drilling a hole and cut a straight - line of defense - bullet ceramics / fiber - reinforced polymer - based composite. using the machining tools, which mainly include multiple - tools machining fiber - reinforced polymer - based composite holes and diamond saw - blade, diamond hole - drills machining defense - bullet ceramics and so on, researched in this dissertation, the machining - experiment of composite, defense - bullet ceramics and ceramics / composite was carried through, and good machining result was gained

    然而，輕質復合裝甲材料的加工仍是一個亟待解決的問題，為此本課題分析研究了輕質復合裝甲材料的物理機械性能、組織結構特點和加工機理，即：維增強聚合物基復合材料和工程陶瓷；研製了輕質復合裝甲材料加工所用的專用工裝，主要包括專用刀具和專用夾具；研究了輕質復合裝甲成型后的加工技術，主要解決了工程陶瓷復合材料板的鉆孔和直邊切割加工；利用所研究的加工纖維增強聚合物基復合材料臺階孔用的復合刀具、切割直邊用的金剛石釬焊切割鋸片、加工工程陶瓷用的金剛石套料鉆、切割工程陶瓷復合材料板用的金剛石切割鋸片等加工刀具對纖維增強聚合物基復合材料和工程陶瓷，以及工程陶瓷復合材料板進行了加工實驗，並取得了良好的實驗效果。
  14. The influence that the zr / ti ratios have on the ceramic crystal structure and its properties are studied through the research carried out about the relative respects of the fabricated samples. the increase of zr / ti ratio can result in the crystal structure transformation from the tetragonal to the rhombohedral, it can also induce the weakness in the stability of the ceramic crystal structure, for example, the drop in the curie temperature. in order to enhance the relative low mechanical quality factor of pzn - pzt system piezoceramics, component addition pb ( mn1 / 3sb2 / 3 ) o3 ( hereafter abbreviated as pms ) are introduced in to form a new psudo - tetragonal system ceramics

    為獲得具有高的機電耦合系數kp ，高的機械品質因數qm的高性能壓電陶瓷，採用二次合成法制備了不同zr ti比的鈮鋅酸鉛-鋯鈦酸鉛基（ pzn - pzt ）三元系壓電陶瓷材料，研究了zr ti比變化對陶瓷結構和性能的影響規律，發現zr ti比增大除了可以使陶瓷的相結構由四方相向三方相轉化外，還降低了陶瓷的結構的穩定性，使tc溫度下降。
  15. New becomes the hole material as the ceramic cement blowholegrinding wheel, the - fine naphthalene compares with traditional chengkongji, has the blowhole to be even, does not have merit and so onpollution, odorlessness, easy to operate, price small advantage, alsomay wilfully adjust to the grinding wheel blowhole size

    作為蜂窩陶瓷製品和陶瓷結合劑氣孔砂輪的新型成孔材料，與傳統的成孔劑?精萘相比，具有氣孔均勻，無污染、無氣味、使用方便、價格便宜等優點，且對砂輪氣孔大小可任意調整。
  16. The above sharpening - stone are made of the blank silicon - carbide and green silicon - carbide with the vitrified bond. and are available for bro ceaaing all kinds of stone materials and floors. for the finer grain sizes, they can be also used in sharpening of the cutting tools

    此種磨石採用黑碳化硅、綠碳化硅、棕剛玉為原料，用陶瓷結合劑製作而成，適用於各種石材、地面的研磨，粒度較細的，也可用來磨礪刀具。
  17. Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature

    性能特點： 1 .曝氣盤採用氧化鋁磨料和陶瓷結合劑高溫燒結而成。
  18. Cbn120 bright black mono - crystal, regular shape, high toughness and good thermal stability. mainly used for metal, vitrified bond and electroplated tools, wheels. the tools have longer service life

    Cbn120亮黑色立方氮化硼單晶，等積形單晶體，晶體較完整，具有較高韌性和熱穩定性。主要用於電鍍、金屬、陶瓷結合劑磨具、砂輪、工具，使製品具有更長的使用壽命，適合磨削黑色金屬材料及合金。
  19. Further more, the experiment using mfc bonding pzt as actuator is carried on which validates the advantage of mfc

    進一步對壓電纖維和壓電陶瓷結合作為驅動器進行了振動主動控制實驗，驗證了壓電纖維作為驅動器的優越性。
  20. Moreover, the dynamic rheological behaviors for conductive filler / piezoelectric ceramic / polymer composites have been studied. the results revealed that different conductive filler affected the dynamic modulus of the composite

    導電填料/壓電陶瓷/聚合物復合體系的動態流變行為研究結果表明，導電填料的種類影響復合體系流變行為。
分享友人
分享到 Line

分享到臉書