階躍法 的英文怎麼說

中文拼音 [jiēyuèfǎ]
階躍法 英文
stechange method
  • 階 : 名詞1. （臺階） steps; stairs 2. （等級） rank 3. [醫學] （耳蝸的三個螺旋管的任一個） scala 4. [數學] order 5. [地質學] stage
  • 躍 : 動詞（跳） leap; jump
  • 法 : Ⅰ名詞1 （由國家制定或認可的行為規則的總稱） law 2 （方法; 方式） way; method; mode; means 3 （標...
  1. Diagrammatic method of transfer function idenlified by step - up response curves

    由階躍響應曲線辨識傳遞函數的圖解方法
  2. They varied both chamber pressure and mixture ratio, making use of a stepfunction change in the oxidizer injection rate.

    他們通過用氧化劑噴射速率階躍函數變化的方法來改變氣室壓力和混合比。
  3. Dynamic weighted fit method in step calibration for ultra - broadband and very - broadband seismometer

    超寬與甚寬頻帶地震計階躍標定的加權動態擬合法
  4. In this paper, high concentration vanadium electrolyte has been prepared by electrolysis, graphite and graphite felt electrode also have been made, moreover, the electeodes have been activated, and based it, a lab - level vanadium battery has been manufactured. cyclic voltammetry, current step and invariable current charge / discharge method have been used to study the reactive mechanism of electrolysis, of vanadium electrode reaction and of electrode activation, also to investigate maiden charge process and electricity performance of vanadium battery. the influence of electrode activation and trace stibium ion, indium ion added into vanadium electrolyte has been discussed

    利用循環伏安法、恆電流階躍法、恆電流充放電循環等電化學方法，探討了電解法制備釩液流電解質的反應機理，考察了釩的電極反應、電極表面活化處理對釩的電極反應的影響，結合電極反應分析了活化的機理；還考察了釩電池初次充電活化過程及恆流充/放電循環的電性能；並且考察了添加銻離子、銦離子對釩電池電性能特別是析氫行為的影響。
  5. The identification results of step and sine steering angle input showed that the proposed identification method is not only practical, but also with high accuracy

    通過方向盤角階躍輸入和正弦輸入的識別結果表明，這種識別方向盤角輸入的方法是可行的，並且具有識別精度高、運算速度快等優點。
  6. We use the leap, linear and exponential methods to reduce the minimum contention window ( ) and the distributed inter frame space ( difs ), so

    提高優先級的方法採用減小dcf中的和difs ，分別採用階躍的、線性的和指數的不同方法實現。
  7. In the fourth chapter of this thesis, the initial stages of electrocrystallization of nickel on vitreous carbon from a leaching solution containing ammonia and chloride were illustrated in terms of cyclic voltammetric and chronoamperometric techniques

    在第四章中，通過採用循環伏安法和恆電位階躍法研究了氨絡合物體系中鎳存玻璃碳上電結晶的初期行為。
  8. In the active circuit part, based on the theories of multiplier of srd and fet, we have designed the circuit of x band 6 multiplier and ka band tripler. then they are simulated and optimized using harmonic balance method. furthermore, the results of optimization and experiments are analyzed

    在有源電路部分，我們介紹了階躍管、 fet倍頻器的基本原理，在此基礎上分別設計了兩個倍頻器電路，然後利用諧波平衡法進行了模擬，並對模擬、測試結果作出了比較。
  9. For obtaining exact solution for the impulse response or step response, the preferred method is to solve the original differential equation on a digital or analog computer.

    要獲得脈沖反應或階躍反應的精確解，最好的辦法是用數字或模擬計算機求解原始微分方程。
  10. The function of c2h1obn in ni - w - b alloy electrodeposition has been studied by means of cyclic voltamxnetry ( cv ), the deposition mechanism of ni - w and ni - w - b alloy studied by potentiostafic step and their structures before and after heat treatments investigated by xrd and dsc. the effects of bath compositions and deposition conditions on the structure and properties of ni - w - b alloy and ni - w - b - ptfe composite coatings were explored

    本文主要以ni - w - b合金為研究對象，運用循環伏安方法研究二甲基胺硼烷在ni - w - b合金電沉積過程中的作用、階躍電位研究ni - w合金和ni - w - b合金電結晶機理、 xrd和dsc方法研究ni - w合金和ni - w - b合金電沉積層的結構以及合金在熱處理過程中的結構變化。
  11. 5. the control systems of the heater are designed by the adaptive fuzzy neuron control arithmetic. the step response curve is got. the results show their nice performances

    針對實驗室電加熱爐系統，使用自適應模糊單神經元控制演算法進行控制系統的設計，得出階躍響應曲線，取得了滿意的控制效果。
  12. In this paper, a new method is proposed, using the instant response of the induction motor to voltage pulse and current break when the motor stops

    本文首先利用感應電動機對脈沖電壓和階躍電流的瞬態響應，對電機參數進行了靜態測量，模擬結果表明了方法的可行性。
  13. And classic pid control method and numerical pid control method have been introduced in the paper. the paper adopt stabilization border method to set the pid parameters and simulates the control system which is based on matlab / simulink. simulation results indicate that pid control ’ s simulation results have a good effect in low - frequency stage, but it is not perfect in mid - frequency and high - frequency stage

    採用穩定邊界法實現對pid參數的整定，並基於matlab / simulink對控制系統進行了模擬，模擬結果表明:低頻段pid控制正弦跟蹤曲線取得了良好的效果，而在中頻和高頻段時的跟蹤效果不是很好， pid控制的階躍響應超調量較大， pid控制三角波曲線的高頻性能也不理想。
  14. Based on the test system of unloading valve, the step response method is used to acquire the step response curve of this system

    以卸荷閥性能測試系統作為研究對象，利用階躍響應法獲得系統的階躍響應曲線並求得了系統的傳遞函數。
  15. In the present paper, according to the characteristics of the dynamic running of the thermoelectric refrigerating devices and its components for the refrigerator is analyzed and the independent components " models are established. the entire model describing the working procedure of the refrigerating system is set up with the method of parameters coupling to combine the models of the refrigerating system, load, cabinet and air in the cabinet. the running characteristics of thermoelectric refrigerators on the effects of received current, load and ambient temperature are investigated using small - signal linearization method

    本文根據熱電製冷系統動態運行的特點，分析了電冰箱製冷系統及各個部件的熱物理過程，運用參數耦合的方法把製冷系統、負載、箱體及箱內空氣模型有機地結合在一起，建立了完整的製冷系統工作過程模型，用小階躍信號線性化法分析了電流、負載功率和環境溫度波動共同作用下的熱電製冷器工作特性。
  16. Abstract : the equivalent step planar wave - guide method is proposed to studythe propagation properties and design of diffused planar wave - guide. the model was established, and a set of simulation has been done, and a series of relationship curves among the parameters of wave - guide propagation, structure and technics are obtained. these curves are helpful to diffused planar wave - guide design and technical parameter selection

    文摘:本文引入一種研究擴散光波導傳播特性及設計計算的新方法? ?等效階躍平板波導方法.建立了擴散平板光波導的等效階躍平板波導模型，進行了一系列的模擬計算，得出了一系列波導傳播參量、結構參量與工藝參量之間的關系曲線.這些曲線對于擴散平板光波導的設計計算、工藝參量選擇等具有重要指導意義
  17. The direct method of process identification for computer control system by unit step response

    計算機控制系統對象模型辯識的單位階躍響應直接法
  18. A on - identify model of proportional valve pressure controlled system was established though analyzing the configuration of dbetr type proportional pressure relief valve firstly, and then using classical step response method to identify system parameter, a practicable system simple model was deduced at last

    摘要從dbetr型比例壓力溢流閥結構出發，先建立比例閥控制壓力系統的待辨識模型，再採用經典的階躍響應法辨識系統參數，得到工程上適用的系統簡化模型。
  19. Secondly, image enhancement technique based on linear filtering is adopted. a new image segmentation method by means of automatic multilevel threshold is given, which realizes partial multilevel threshold segmentation based on image region partition of gray - level position projection, removes the influence of uneven illuminance or uneven gray - level distribution on goal recognition, and resolves the problem of error segmentation caused by threshold step between adjacent regions by threshold transition. the method has well robustness

    在圖像處理時，採用基於線性濾波的圖像增強方法，並提出了一種新的自動多閾值圖像分割方法，該方法以基於灰度位置投影的圖像分區實現局部多閾值分割，克服了不均勻照明或不均勻灰度分佈對目標識別的影響，同時，通過閾值過渡很好地解決了相鄰區域閾值「階躍」引起的錯誤分割問題，具有很好的魯棒性。
  20. The predictive function control is discussed in detail. considering the step function as an example, the stability and robustness of the pfc system are analyzed through the discrete system structure and the inter - model control system characteristics

    詳細討論了基於狀態空間描述的預測函數控制演算法，從離散系統的結構、內模控制系統的特性出發，以階躍函數為例，針對pfc系統的穩定性和魯棒性進行了分析。
分享友人
分享到 Line

分享到臉書