電接點材料 的英文怎麼說

中文拼音 [diànjiēdiǎncáiliào]
電接點材料 英文
electric contact material
  • 電 : Ⅰ名詞1 （有電荷存在和電荷變化的現象） electricity 2 （電報） telegram; cable Ⅱ動詞1 （觸電） give...
  • 接 : Ⅰ動詞1 （靠近;接觸） come into contact with; come close to 2 （連接; 使連接） connect; join; put ...
  • 點 : Ⅰ名詞1 （液體的小滴） drop （of liquid） 2 （細小的痕跡） spot; dot; speck 3 （漢字的筆畫「、」）...
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 接點 : （接觸點; 連接點） contact; closing; junction; connection point; terminal pad接點電阻 contact resistance
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  1. The industrial development in shandong should be located on the above - mentioned superior industries, known as the industries which is " inoculated " by the high and new technology and upgraded such as the leading industry like mechanism, electron, petrifaction and etc, or the traditional industry like energy source, textile, foodstuff, metallurgy and etc, or the high and new technique industry like electronic message, biological engineering, ocean and etc. correspond with the development and grandness of these strategic industry, the famousbrand products including the products of the household appliances, the utility type sedan, the refine chemical industrial products, computer software, halobios pharmacy, industrial revelation ware and etc should be created gradually, and then improve the structure of the industrial products

    山東省工業發展應定位於上述優勢產業，即經過高新技術「嫁接」和換代升級的機械、電子、石化等主導產業，能源、紡織、食品、冶金等傳統產業，電子信息、生物工程、海洋等高新技術產業。相應于這些戰略產業的發展和壯大，逐步創造出包括家電、經濟型轎車、精細化工產品、計算機軟體、海洋生物制藥、工業新材料製品等在內的名牌產品，並進而改善工業產品結構。隨著中國加入世貿，為應對經濟全球化的挑戰，關于產業競爭力的研究成為一大熱點，但以往的研究都側重於從國家或企業的角度考慮問題，本文試圖從區域經濟的角度研究產業競爭力，探索提升產業競爭力的途徑，為研究中國產業國際競爭力提供借鑒和參考。
  2. Pulse electric current heat treatment ( pecht ) developed by sodick, ltd., of japan, is a recently developed material processing method which consists of spark plasma sintering and welding, plasma activated sintering and welding, big pulse electric current ( bpec ) diffusion welding etc. the following are basic merits of pecht : rapid heating and cooling ; short sintering or welding time ; lowering sintering or welding temperature

    脈沖電流熱加工（ pulseelectriccurrentheattreatment ，比如燒結，焊接等）是九十年代發展起來的一種材料快速制備新技術，它包括放電等離子燒結與焊接、等離子活化燒結與焊接、脈沖大電流擴散焊接等。它具有升溫、降溫速度快、能在較低的溫度下燒結或焊接以及時間短的特點。
  3. Testing of materials for semiconductor technology ; determination of the dopant concentration profile of single crystalline semiconductor material by means of the capacitancevoltage method and mercury contact

    半導體技術材料的試驗.用電容-電壓法和水銀接點確定
  4. Abstract : there are offered many ways how to improve work of a spark plug. but one of the m ost important problems has not been solved yet. this is a thermal mode operation of a spark plug. the ideal spark plug should be instantly heated at the moment of occurrence of a spark and instantly cooled down in expectation of the foll owing electrical pulse. thus it balances between preservation of heat for self ? c leaning from scale and its removal in avoidance self ? ignition. in this article a uthor managed for this time to offer a spark plug with capability “ self ? regula tion ” of heat flux removed from a zone of ignition. essence of the offer is a t ip ， which is transparent for heat flux. it is produced from single crystal of sap phire

    文摘:在如何提高火花塞的工作質量方面有多種方法，但是其中最重要的一個問題還沒有得到解決，那就是火花塞工作的熱學模型問題.理想的火花塞應該能在點火的瞬間被立刻加熱，並且在接下來的電脈沖過程中迅速冷卻，由此在熱量的存儲與散發之間取得平衡，以避免自點火.本文力圖展示一種具有自動調節源於點火區域熱流能力的火花塞，其技術的關鍵是頂部絕緣體材料，它是由藍寶石單晶製作，而非傳統的氧化鋁陶瓷
  5. Measuring method for contact resistance of precious metal electrical contact materials

    貴金屬電觸點材料接觸電阻的測量方法
  6. This work was supported by the state science and technology ministry of p. r. china under the contact no. g20000683 - 06, and by the national natural science foundation of p. r. china under grant no. 60046001. gallium nitride is one of the 3rd generation semiconductor materials. from 1990 ' s, gan has attracted more and more attention and advanced rapidly, mainly due to its direct transition, wide band gap ( ~ 3. 4ev ) and other excellent characters

    Gan是直接躍遷的寬帶隙材料，具有禁帶寬度大（ 3 . 4ev ，遠大於si的1 . 12ev ，也大於sic的3 . 0ev ） ，電子漂移飽和速度高，介電常數小，導熱性能好等特點，在光電子器件和電子器件領域有著廣泛的應用前景。
  7. High - temp molanstone heat - insulation brick is made with domestic newest energy - effcient fire - proof material by using advaned technologies introduced from abroad. it has the strengths of heat - resistance, high intensity, low heat - conduction coefficient and remarkable energy - saving effects. it can be used in petrolum partition kiln, metallurgical hot stove, ceramic kiln, tunnel kiln, and as linings of many electric stoves. it can also used on fire directly. according to the testing of relevant authorities, this product has reached standards of products from foreign competitors

    高溫莫來石質絕熱磚是我國引進的新技術，國內最新型的節能耐火材料，具有耐高溫、強度高導熱系數小，節能效果顯著等特點，適用於石油裂介爐、冶金熱風爐、陶瓷輥道窯、隧道窯、電瓷抽屜窯、玻璃坩堝窯及各種電爐的內襯，可直接接觸火焰、經有關技術監督部門檢測及使用，產品達到國外同類產品的技術指標。
  8. It is believed that the slurry making method using electromagnetic stirring which is contactless stir ring will be suitable for high melting point iron and steel material

    筆者認為電磁攪拌制備漿料方法中的攪拌是無接觸攪拌，更適用於高熔點鋼鐵材料。
  9. Abstract : the significance of the high speed cutting technology is described. the application and advantagies in the electrode manufacture ， cavity machining of quench - hardening material and prototyping are introduced. the requirement to the high speed milling machine is pointed out

    文摘:敘述了高速切削技術的意義，並介紹了它在電極製造、淬硬材料型腔的直接加工及樣件的快速成型中的應用及優點，並簡要說明對高速銑床的要求。
  10. Laser diode ( ld ) has the advantages of small volume, light weight, longevity of service, high electro - optic convert efficiency and direct modulate etc. now it is more widely used in the fields of information, energy, therapeutic, material, entrainment and so on

    半導體激光器（以下簡稱ld ）具有體積小、重量輕、壽命長、電光轉換效率高、可直接調制等優點，目前在信息、能源、醫療、材料、娛樂等諸多領域都得到了越來越廣泛的應用，材料和器件的水平也有了長足的進展。
  11. " the contactors feature silver cadmium oxide, double break contacts to assure a long electrical life, high weld resistance and excellent interrupting capacity.

    這種接觸器採用銀氧化鎘材料，雙斷接點，有利於保證較長的電氣壽命、較高的抗焊接性能和傑出的斷開容量。
  12. The maximal power outputs of 37. 0 mw / cm2 and 30. 0 mw / cm2 for the p - and n - type laminated materials respectively at the temperature difference 490 have been experimentally obtained, which are about 2. 5 and 3. 0 times those of - fesi2. chemical analyses show that the interface failure between the bridge alloy and the semiconductor bi2te3 results mainly from the eutectic mixtures with low melting point and brittle compounds formed during welding and long time annealing at 190. it is found that the electrical properties of a laminated structure are mainly controlled by the wettability of the bridge alloy on the semiconductor surface

    發現： 1 ）疊層材料具有明顯優于均質材料的熱電性能，在490溫差下， p -型和n -型疊層材料的最大輸出功率分別達到37 . 0和30 . 0 （ mw / cm ~ 2 ） ，是同類型均質- fesi _ 2的2 . 5和3倍； 2 ）在焊接過程和190長時間退火處理過程中，焊接過渡層合金和基體半導體（特別是bi _ 2te _ 3 ）之間存在明顯的元素相互擴散，從而在過渡層中形成一些低熔點共晶體和脆性化合物，這是導致疊層材料破壞的主要原因； 3 ）焊接過渡層合金與半導體基體之間的潤濕性是影響界面層電性能的主要因素。
  13. The high contact pressure and the selection of various contact materials result in reliable and cost - effective solutions, above all when high currents have to be switched

    首先是在需要操控大電流的情況下，高接觸壓力和選擇不同的接點材料，可以得到可靠的高成本效率的方案。
  14. The high contact pressure and the choice of different electrical contact materials enable high currents to be switched reliably

    高接點壓力和選擇不同的電接點材料能可靠地控制大電流。
  15. After a detailed analysis of the situation of the electromagnetic forming and electromagnetic riveting domestically and overseas, basing on the method of combining academic analysis with experiment research, we systematically studied the technological parameter and deformation characteristic of the rivets. the riveting quality is analyzed and tested at last

    本文在深入分析國內外電磁成形及電磁鉚接研究現狀的基礎上，採用理論分析和實驗研究相結合的方法，對常用材料鉚釘的鉚接工藝參數、成形特點以及鉚接后製品的性能進行了系統的研究。
  16. Zno is a ii - vi wide bandgap semiconductor which is used for various applications such as gas sensors, bulk - acoustic - wave devices, surface - acoustic - wave devices, varistors, light emitting, light detecting devices and so on. undoped and al doped zno thin films have also been widely used in transparent conducting layers because of their higher thermal stability and good resistance against hydrogen plasma processing damage compared with ito ( sn - doped in2o3 ) films

    Zno是一種新型的直接帶隙寬禁帶半導體材料，具有六方纖鋅礦結構，較高的激子束縛能（ 60mev ） ，較低的電子誘生缺陷和閾值電壓低等優點，在uv探測器、藍紫光led和ld等光電子器件領域有巨大的應用潛景。
  17. Sensors using fbg as the sensing component have many advantages including light weight, small size, anti electromagnetism interference, convenience in fiber connecting, wavelength absolute coding etc. multiple point detection of materials ( temperature, strain etc. ) can also be achieved by connecting several sensors into a net using variety of multiplex techniques and embedding it into or sticking on the surface of the material or structure

    以光纖布拉格光柵（ fbg ）為傳感元件的傳感器具有重量輕、體積小、抗電磁干擾、易於光纖連接、波長絕對編碼等優點，還能把多個傳感器利用各種復用技術連接成傳感網路，埋入材料和結構內部或貼裝在其表面，實現對其特性（如溫度、應變等）的多點監測。
  18. Williams suggested that an electrochemically active material sandwiched between the wires should make it possible to change the electrical resistance of the contacts substantially and reversibly, by applying the appropriate voltages across the two nanowires

    威廉斯建議在導線間夾上一種電化學材料，在兩個導線間施加適當的電壓之後，應該可以大幅而且可逆的改變接點的電阻。
  19. The on - line liquid infiltration joining of c / sic composite with different conditions was carried out. a kind of ni - base alloy was used as the interlinker and the composites were woven by different ways. by using the three - point bending test, combined with sem, eds, the microstructure and the properties of joints of the c / sic composites were studied

    本文採用在線液相滲透連接方法，以ni基合金作為連接劑，在不同連接條件下對不同編織結構的c sic復合材料進行連接，並結合掃描電鏡（ sem ） 、能譜分析（ eds ）及三點彎曲強度測試研究了c sic復合材料連接的顯微結構與性能。
  20. The probe is of very high impedance near the insulation resistance of the printed circuit material and is loading the test point with only 2 pf 80 at 1 ghz

    接近印製電路板材料的絕緣電阻，並且在測試點僅載入
分享友人
分享到 Line

分享到臉書