預加荷載 的英文怎麼說

中文拼音 [yùjiāhézǎi]
預加荷載 英文
preloading
  • 預 : Ⅰ副詞（預先; 事先） in advance; beforehand Ⅱ動詞（參與） take part in
  • 荷 : 荷名詞（蓮） lotus
  • 載 : 載Ⅰ名詞（年） year : 一年半載 six to twelve months; six months to a year; 三年五載 three to five ...
  1. This paper emphasize study the seepage of vacuum - heaped load combining precompression., deduce the drainage quantity computation formula for stage loading in soft soil. an example show that the results of calculation are in good agreement with the measured value, this explain that the formula is rational

    本文重點對真空堆載聯合預壓法的滲流進行了研究，得出了在分級加荷下軟土地基滲流量的計算公式，算例表明其計算值與實測值較吻合，說明所建模型是比較合理的。
  2. Based on the destructive test of certain old pre - stressed concrete hollow slab after structural strengthening by cfs, the destructive mechanism and ultimate bearing capacity of old pre - stressed hollow slab after structural strengthening is being researched, which is useful for the strengthening design of old bridge and solvating of single slab problem

    摘要通過某已使用10年的舊橋預應力混凝土空心板受拉區碳纖維布加固后的破壞荷載試驗研究，對受拉區加固后的舊橋預應力混凝土空心板的破壞機理、變形性能及極限承載能力等進行了研究，為舊橋預應力混凝土空心板的加固設計及單板受力問題的分析解決提供了試驗依據。
  3. Here we obtain the strain compatibility method ande equilibrium of forces and concepts of fracture mechanincs, they can be used to predict the ultimats strength in flexure that can be achieved by such elements, given the cfrp cross - sectional area, or conversely, the required cfrp cross - sectional area to achieve a targeted resisting moment of rehabilitated flexureal elements

    Cfrp加固梁在承受彎曲荷載時的破壞是鋼筋屈服后碳纖維斷裂和鋼筋屈服后混凝土壓碎。本文通過應變相容方法和對破壞機理的定義，由給定的cfrp橫截面積預測加固梁的極限彎曲強度；或者相反，在已知加固梁的極限彎曲強度時可以求出所需的cfrp橫截面積。
  4. First, using strip - partitoning method and programming in matlab language, the numerical caculations of the relation curve between moment and curvature are done for the beams strengthened with non - prestressed and pretressed cfrp sheets, base on the assumption of plane section, non - bonding slip and non - peeled destroy. secondly, nolinear finite elemeant analysis by ansys are done for the beams strengthened with prestressed cfrp sheets base on the three assumptions before mentioned, the analysis are all done for the relation curve between load and displacement, the distribution of material stress, the distribution of cracks. lastly, calculation formula of flexural capacity and deflection are proposed

    ）的全過程關系曲線。其次基於上面的三個假定，選擇合理的本構關系，利用ansys通用有限元分析程序對預應力碳纖維布加固梁進行非線性有限元分析，分析了加固梁的荷載-撓度關系、材料的應力情況、裂縫的分佈情況等。最後提出了承載力計算公式和正常使用狀態下撓度計算公式。
  5. By using 5000kn pressure - bent testing machine, the specimens of boulder concrete and crushed stone concrete were tested through three - point - bending method and wedge - split tensile method, the scale division of the index dial of pressure - bent testing machine is larger, whereas the predicted test - load is lesser, so the velocity of exerted load is controlled through observing the reading of the multimeter which is connected with the collecting systerm in order to continuously exert test - load

    本文使用5000kn壓彎實驗機，對不同強度等級的卵石混凝土和碎石混凝土試件分別進行了三點彎曲試驗和楔入劈拉試驗。試驗過程中，由於實驗機噸位較大，而試驗荷載預計較小，為了能夠有效地控制加載大小和加載速度，採用通過觀察與荷載傳感器相連的萬用表讀數控制加載速度的方法，連續加載。
  6. In this test, a special bolt - jack is used to exent of prestressing force to brace angles as the whole structure is under dead - load. in this state brace angles withstand partly load before twice - load and the stress and strain of concrete are decreased. in this way the aim of removal of load and strengthening can be reached

    本試驗中採用專用螺栓千斤頂在恆定荷載水平下對混凝土柱角鋼撐桿施加預壓應力，使外包角鋼在二次受力前即分擔部分荷載，使混凝土應力水平和應變水平降低，達到卸載與加固同步進行的目的。
  7. Aim for the topic - study of prestressed lightweight concrete platform, from selecting style of the platform, to matching concrete material and admixture, to designing and building the model, to carrying out experiments of temperature field and stress performance, and analysis of finite element, some research work have been done as follows : 1

    本文針對「輕質高強預應力混凝土平臺的研究」這一課題，從罐體結構型式的確定，混凝土基本材料及外加劑的選配，模型的設計製作，到模型結構在各種外荷載及溫度荷載作用下的受力性能試驗研究及罐體結構的有限元分析，展開了如下幾個方面的研究： 1
  8. Program can analyze the multi - girder curved bridge, by using the diatropic distributing theory. it can calculate the dynamic programming loading, by using the combined influence. it can analyze the internal force under the action with the prestressed force, by using the equivalent load method

    程序採用橫向分佈的實用計算理論來處理多主梁曲線梁橋的空間受力分析問題；採用組合影響線來對曲線梁橋進行動態規劃加載；採用等代荷載法對曲線梁在預應力作用下的結構內力進行分析。
  9. Modeling the general solid web continuous box girder and opening - in - web ( open web ) continuous box girder by ansys finite element modeling tool, node stress of governing section and corresponding shear lag values are analyzed. the solution is validated by comparing with variational results and modeling test values. based on the model, the section shear lag induced by dead load, prestress tendons and car loads under the most unfavorable condition and lateral symmetry are also approached. the influence of shear lag effect in double - level continuous box girder is considered with opening - in - web and the web location. the analysis indicates that double - level - load arouses less shear lag effect than one - level - load. when self - weight and prestressed tendons act on together, the shear lag effect on box girder take on a evidently change

    基於所建立的有限元模型，本文分別對實腹和腹板開孔兩種箱梁在恆載、車載、預應力荷載作用時，各主要截面的剪力滯效應進行分析，通過施加縱向最不利的和橫向對稱的車輛荷載，研究實腹連續箱梁和空腹連續箱梁在承受雙層荷載和單層荷載時引起的剪力滯效應，並考慮腹板開孔及開孔位置對于連續箱梁剪力滯效應的影響。分析表明，雙層車載對于箱梁引起的剪力滯系數比單層車載的影響要小，對于箱梁中存在引起的剪力滯后現象有一定的改善作用。
  10. ( 2 ) the crack load increases with the increase of the amount of the prestressing steel or the tensioning stress

    （ 2 ）預應力筋用量的增加、張拉控制應力的增大使預應力框架梁、柱的開裂荷載提高。
  11. The prime works are as follows : strain and stress distribution of section was analyzed. the effect of prestress degree. on cracking moment was explored. the relation of the unbonded prestress increment to effective reinforcement index and corresponding bonded prestress increment were studied. the formulae had been established

    其次，設計了三根活性粉末混凝土無粘結預應力疊合梁，兩點對稱集中加載、一次受力，得到了它們的截面應變分佈、撓度與變形、無粘結預應力鋼絞線的預應力增量、裂縫的發展與分佈以及極限荷載。
  12. Abstract : the paper describes the application of vacuum preloading in combination with surcharge preloading to improve soft soils for la rge working load in the storage area of phase of nanjiang coal terminal of ti anjin port. analysis is made on the result of the improvement and it is concluded that the technique of vacuum proloading in combination with surcharge preloadin g can be used to improve soft soils for large working load and the result can be remarkable

    文摘:本文介紹了大使用荷載條件下真空聯合堆載預壓技術在天津港南疆煤碼頭堆場（二期）軟基加固工程中的應用情況，並對加固效果進行了詳細分析，得出了大使用荷載條件下可採用真空聯合堆載加固軟基且加固效果明顯的結論。
  13. High - strength structural bolting assemblies for preloading - part 2 : suitability test for preloading

    預加負荷用高強度結構螺栓組件.第2部分:預加載適用性試驗
  14. These materials can not be pretensioned to avoid the slack condition resulting from asymmetrical loadings.

    這些材料不能預加應力以免除由於非對稱載荷所產生的鬆弛。
  15. Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load

    橫向荷載下敞形結構高壓蒸養加氣混凝土或輕集料混凝土預制加筋部件的性能試驗
  16. Simultaneity, through contrast analysis validate that antiseimic capacity of expansion web is better than that of steel web. therefore, based on the experiences summed up by precedence, the formulation for calculating the crack load and limit load of brick masonry house reinforced by expansion web is advanced, which provides project reference. based on the analysis and studies of masonry shearing strength, test of prestressed single brick masonry wall, and test of prestressed brick masonry house models, and ect, the article has carried through several aspect research as below : 1. a series of experiment on material capability of expansion web, including intensity of single thread and expansion web, ect ; 2. research on influence of loading and destroy of masonry brick building reinforced by expansion web under lowcyclic loading ; 3. study of impact of expansion web on ductility, energy dissipation, intensity, ect under the same situation as above ; 4. put forward computation formulation of masonry brick building reinforced by expansion web

    本著以上的研究目的，本文在分析和借鑒前人砌體抗剪強度理論、預應力單片墻試驗研究、預應力模型抗震性能試驗研究等基礎上，進行了以下幾方面的研究工作: 1 .作為一種新型結構材料擴張網，進行了一系列的材性試驗（單絲強度、網片強度和在砂漿中被約束條件下的網片強度及其相應的彈性模量） ； 2 .研究了水平荷載往復作用（低周交變）下，普通鋼絲網和擴張網砂漿對砌體結構抗裂及承載能力和破壞形態的影響，並將這兩種材料的加固效果進行了對比； 3 .上述狀態下，兩種網片水泥砂漿對砌體結構變形、延性、耗能、剛度退化等抗震性能的影響及其影響效果的比較； 4 .提出擴張網水泥砂漿加固砌體結構的抗剪強度計算建議公式。
  17. Introduced by prestressed pier in the gate of spillway in xiao xia hydroelectric power station, the text reasonably established 3 - d finite elements mechanic model by the advanced finite elements popular in the world which can expediently impose tension of anchor funicular at its place. it also considered possible diversified combination of loading, and indicated that the effect of its prestressed action is fruitful compared with its conventional counterpart by study of mechanic calculation in comparison. as a result, it vastly improved burdening state of pier. by analysis of 3 - d finite element method, it also gained the stress result indifferent boundary conditions such as breast wall joint support and fixed support, and the displacement result in diversified loading combination. those results gained the instructive and reference value in design of prestressed pier

    本文結合黃河小峽水電站泄洪閘預應力閘墩這一工程實踐，採用國際上已成熟的有限元方法，合理地建立了預應力閘墩的三維有限元模型，該模型可方便地按預應力錨索的點位施加錨索預張拉力，考慮了可能發生的多種荷載工況組合，並與無預應力閘墩結構進行了對比分析研究，指出其預應力效果是明顯的，可以大大改善閘墩結構的受力狀態，通過三維有限元分析，還得到了胸墻簡支、固端不同情況下的應力成果和各荷載下的位移成果，這些成果的取得對預應力閘墩的設計具有一定的指導和參考價值。
  18. In this paper, the three level fortification criterion, two stage design method and the elastic response spectrum theory are adopted, and the program of nba ( the program of nonlinear - aseismic analysis for beam bridge ) is used to calculate. through gathering, analyzing and calculating a lot of bridge design materials, this paper induces a simple way to calculate the relative displacement of the beam and the pier, and then according to the current design method, it concludes a better design principle of the supporting length of the beams. at the same time the dynamics is adopted to put forward the design method of the carrying capacity and the lengthen of prestress wire ( steel bar ) falling - off prevention structures of highway bridges

    本論文採用三水準設防、兩階段設計方法、彈性反應譜計算理論，運用橋梁結構非線性地震響應分析程序nba （ theprogramofnonlinear ? aseismicanalysisforbeambridge ）進行計算；通過收集大量的實橋設計資料，經分析計算，歸納總結出計算上下部結構相對位移的簡便計算方法；並綜合國內外的經驗值，提出梁的支承長度se的設計原則；同時運用動力學突加荷載的原理，推導分析了預應力鋼絞線式（鋼棒連接式）落梁防止裝置設計承載力的計算方法和設計伸長量s _ f的取值；最後本文通過實橋計算，說明了落梁防止系統設計的方法。
  19. Concrete filled steel tube ( cfst ) arch bridge is a new type of bridge which is widely applied in china recently, and it is a relatively ideal structural form for long span arch bridge. with the background of the practice of liantuo bridge, in the view of point of feasible in technology and reasonable in economy, the key techniques and difficulties in the construction of cfst arch bridge are analyzed and discussed in the thesis. the disadvantages in the current design and construction and the improvement method are also indicated

    本文以蓮沱特大橋工程實踐為背景，以主拱施工研究為主線，對鋼管混凝土拱橋重難點施工工藝，從技術上可行、經濟上合理的角度出發，詳細的進行了分析闡述，並指出了設計施工中存在的不足和今後需改進的方向；通過對鋼管混凝土拱橋施工過程中內力的計算，確定了拱肋施工最不利荷載工況下加載重量、壓重順序和張拉臨時預應力束等一系列施工措施，並將計算結果與現場監測觀測數據進行了比較分析，為今後進一步研究這類結構提供了參考。
  20. In this thesis, the experimental research of the behavior of high strength concrete axial compression columns and eccentric compression columns under non - uniform temperature field are conducted. from the experimental analysis, the variational regularity of ultimate load capacity and deformation of high strength concrete compression - flexure members under non - uniform temperature field is obtained. the influences of different factors including temperature, stirrup contents, strength grade of concrete, pre - loading level, eccentricity and different loading - temperature paths to refractory capability of members are investigated

    文中還對高強混凝土軸心受壓柱和偏心受壓柱在不均勻溫度場下的力學性能進行了試驗研究，通過試驗分析了高強混凝土壓彎構件極限承載力和變形在不均勻溫度場下的變化規律，考察了不同升溫溫度、箍筋用量、混凝土強度等級、預加荷載水平、荷載偏心以及荷載?溫度途徑等對構件耐火性能的影響，通過試驗量測，得到了構件的截面溫度場。
分享友人
分享到 Line

分享到臉書