air properties 中文意思是什麼

air properties 解釋
空氣性質
  • air : n 1 空氣,大氣。2 天空,空中。3 微風,和風。4 態度,樣子,風度,氣派;〈pl 〉高傲的架子。5 傳播,...
  • properties : (特性)命令修改特性
  1. Properties : white light powder, insoluble in water but soluble in ethanol and aether. absorbs moisture from the air. decompounds into stearate and calcium when meeting strong acid

    物理性能:硬脂酸鈣,為白色輕質粉末,不溶於水,溶於熱的乙醇和乙醚,在空氣中吸收水分,遇強酸分解成硬脂酸和相應的鈣鹽。
  2. The factors affecting the properties of air electrode were examined in this article and mno2 / c was prepared. the process parameters of air electrode were optimized, and the aluminum / air battery was also assembled

    本文主要針對影響空氣電極性能的因素進行了系統的研究,制備了mno _ 2 / c催化劑,確定了空氣電極的最佳制備工藝,將空氣電極與鋁陽極組裝成電池,並初步考察了電池的性能。
  3. This product is a highly effective and penetrating - tylpe water - proofing agent that is also environmentally friendly and has strong chemosmosis integration properties that can remedy tiny cracks in the substrate materials and is also permeable to air

    產品功效:本品為自然滲透型石材防護劑,高效、環保、化學滲透結合力強,能彌補石材細小裂縫,具有透氣性。
  4. Methods for determination of physical properties of tobacco and tobacco products - determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper

    煙草和煙草製品物理特性測定方法.第4部分:用卷煙紙過濾嘴過濾連接紙材料空氣滲透性測定
  5. As to the work about theory analysis, at first, the paper describes the atomizing and humidifying process of the centrifugal nozzle with firing pin type, high pressure and little aperture and liquid physical properties. later, combining with the structure characters of this kind of nozzle, the paper studies on the theory of the atomizing and humidifying process by three phases, which is water film forming phase, water film falling into pieces phase, and heat and mass transfer between water and air phase in turn

    理論工作方面,首先描述了撞針型高壓小孔徑離心式噴嘴的霧化加濕過程和液體的物理性質,然後結合撞針型高壓小孔徑離心式噴嘴的結構特點,將其霧化加濕過程分三個階段進行機理上的研究,這三個階段依次為液膜形成、液膜初次破碎及二次霧化、水與空氣的熱濕交換。
  6. Aim of this study was to meet the need for development of tribological parts in pumps. at room temperature tribological properties of different sliding pairs of silicon carbide and alumina - based ceramics were tested using a laboratory tribometer in the ring - on - plate geometry under reciprocating sliding linear contact in different media, such as distilled water, aggressive media and air

    本文針對目前泵用摩擦零部件材料發展的需要,在實驗室摩擦磨損試驗機上研究了按環/塊線接觸方式作往復運動條件下的碳化硅和氧化鋁基陶瓷材料摩擦副在水、化學腐蝕性介質作潤滑劑和無潤滑時室溫下的摩擦磨損特性。
  7. The dual - core air - guided pbgfs couplers are designed and decoupling phenomenon has been found. coupling properties of the pbgfs with adjacent two air cores are evaluated. the decoupling point, where no power transfers between two cores,

    對具有兩個相鄰纖芯的空氣傳導光子帶隙光纖的傳導模式和耦合特性進行了理論分析,在所分析的結構中發現了無耦合點,在該點兩個相鄰纖芯之間不發生能量交換。
  8. Method for measurement of moist air properties

    潮濕空氣特性的測量方法
  9. In the third chapter of this dissertation, based on the physical and chemical properties of hydrogen and the combustion characteristics of hydrogen, the quasi - dimension combustion calculation model of hydrogen ? fueled engine is set up through analyzing the characteristics of turbulence flame and chemical reaction kinetic of hydrogen ? air mixture. the model includes the dual ? area thermodynamics sub - model, quasi - dimensional turbulent entrainment combustion sub ? model, turbulence flame promulgating sub ? model, hydrogen - air mixture chemical kinetic sub - model and loss of heat transfer sub - model and so on

    本文從氫燃料的物化特性和燃燒特徵著手,通過分析氫空氣混合氣燃燒的湍流火焰結構和燃燒化學反應動力學,基於雙區燃燒模型,建立了包括雙區熱力學、準維湍流卷吸燃燒、湍流火焰傳播速度、氫空氣混合氣燃燒化學反應動力學以及傳熱損失等模塊的燃燒模型,並給出了相應的計算方法。
  10. A reasonable position of driving nozzle helps to achieve the maximum material flow that also depends on other parameters such as backpressure, properties of conveyed material and driving gas. it is observed that, an increase of convergent section angle is harmful to the pneumatic conveying system, and also influences on the mass flow rate of conveyed material, the distribution of static pressures in injector and the pressure drops of conveying pipe. in addition, within a reasonable scope of air mass rate, increasing the driving jet velocity is more advantageous than enlarging the dimension of driving nozzle

    試驗研究發現,氣體噴嘴位置對氣固噴射器的輸送能力影響最大,氣體噴嘴存在某一最佳位置,而這一最佳位置與背壓、輸送物料特性和輸送風特性相關聯;氣固噴射器的收縮角對其輸送能力、內部靜壓分佈和輸送管阻力特性均有適量影響,收縮角增大對整個輸送系統均不利;在適當的輸送風范圍內,提高氣體噴嘴出口速度比擴大氣體噴嘴尺寸更為有利,但氣體噴嘴出口速度過高會增加氣固噴射器和輸送管內的能量損耗,給輸送帶來不利的影響;系統背壓與氣固噴射器的氣體噴嘴出口速度的選取有關。
  11. Traditional hydronic sizing methods can be used for selecting pumps, expansion tanks, heat exchangers, and air removal devices, as long as the heat transfer liquid ' s thermal properties are considered

    傳統的液體循環加熱體量法在泵、蒸發器、熱交換器和空氣移動裝置的選擇中可以應用,在考慮載熱流體的熱血特性的情況下。
  12. The authors measure their electrical transport properties in air and in vacuum respectively and find that the electrical transport of sodium titanate nanowires devices is affected. this is attributed to oxygen adsorption on the surface of nanowire

    分別在大氣和真空兩種環境下測量了該器件的電學特性,發現器件所處的氣體環境可以影響其電傳輸特性,這可能是由於納米線表面的氧分子吸附造成的。
  13. This paper mainly study on the technics of preparing nano - si3n4 and icpecvd. seeking for the proper parameter and technics, crystallization of nano - si3n4 powder with muffle furnace, probe the new effective way of improving the properties of nano - si3n4 powder the ion density in the reaction chamber was diagnosed by a langmuir probe. the rules were obtained under different air pressure, different radio frequency power and different position which the ion density changes about from 1010cm - 3 to 1010cm - 3 decreasing as the pressure increases and increasing as the power decreases

    利用朗繆爾探針診斷了反應室內等離子體參數,得到不同位置、不同功率和不同氣壓下等離子體密度的變化規律,結果表明離子密度為10 ~ 8 10 ~ ( 10 ) cm ~ ( - 3 ) ,等離子體密度隨著功率的增大而增大,隨著氣壓的升高而減小,由於離子鞘層的存在,在一定條件下提供了局部等離子體密度穩定的區域。
  14. This paper gives a description of discharge tube, mirror, laser head and laser power supply of an air cooling argon laser which output is over 1w, and shows its properties

    介紹輸出功率超過1w的風冷氬離子激光器的放電管、反射鏡、激光器頭部和激光電源的設計考慮,給出了它的性能。
  15. Effects of the air oxidation of carbon fibers on the properties of 3 - d braided carbon resin composites

    空氣氧化處理對三維編織炭復合材料性能的影響
  16. These deviations are not acceptable for typical calculations in hat. similar problems occur for caes plants. in order to meet the demands of engineering design, the humid air must be regarded as a kind of real gas and more accurate thermodynamic properties of the humid air are acquired at high temperature and high pressure

    本文針對新型熱力循環中對高溫高壓濕空氣熱力學性質參數的需求,以濕空氣透平和壓縮空氣蓄能系統中的工質為研究對象,在維里狀態方程的框架下,運用對應態原理,提出一個適合計算高溫高壓濕空氣熱力學性質的對應態維里方程,並利用兩種方法對濕空氣的汽液相平衡進行計算。
  17. According to the parameter range of humid air used in humid air turbine and compressed air energy storage ( caes ) system, the applied range of thermodynamics properties of humid air is determined. 2. based on virial state equation and the corresponding - state principle, expand - corresponding - state principle is introduced to describe the virial coefficients of state equation

    對應態理論是一個普適性理論,因此對應態維里方程具有一定的外推性,計算了本文提出濕空氣熱力學參數范圍內的壓縮因子; 4 .應用本文提出的對應態維里方程,計算了濕空氣的偏差焓和偏差熵。
  18. This thesis for the first time bases its analysis on the maintenance characteristics and repair mechanisms for crack filling and pothole repair in asphalt roads. it analyzes the properties of the aggregate and the bituminous binder in patching materials, and further analyzes the compatibilities of the aggregate and the bituminous binder, patching materials and old pavement materials. furthermore, it determines the grading types, the mineral aggregate gradations, the application rate of asphalt, the principle of selecting component materials and the air void

    本文首次依據瀝青路面裂縫填封和坑槽修補的維修特性和修補機理,全面分析了修補材料中集料與瀝青結合料應具備的性能要求,並對集料與瀝青結合料、修補材料與原有路面材料的相容性進行了深入的分析,同時分析確定了修補材料的級配類型、礦料級配、瀝青用量范圍、組成材料的選用原則及空隙率等。
  19. Soil improvers and growing media - determination of physical properties - dry bulk density, air volume, water volume, shrinkage value and total pore space

    土壤改良劑和生長劑.物理特性的測定.毛體積干密度空氣量水量收縮值和總孔容
  20. The properties of air electrode and catalyst were investigated by measuring the curve of steady - state polarization

    實驗採用恆電流的穩態極化曲線來考察催化劑和空氣電極的性能。
分享友人