analysis of simulation result 中文意思是什麼

analysis of simulation result 解釋
模擬結果分析
  • analysis : n. （pl. -ses ）1. 分解，分析；【數學】解析。2. 梗概，要略。3. 〈美國〉用精神分析法治療（＝ psychoanalysis）。
  • of : OF ＝Old French 古法語。
  • simulation : n. 假裝；模擬；裝病，裝瘋；【生物學】擬態，擬色。
  • result : n 1 結果，效果，效驗，成效；成績；〈pl 〉【體育】比分。2 【數學】計算的結果，答案。3 〈美國〉（立...
  1. Stability of rock slopes is generally controlled by the structure of rock masses, especially the soft structure surfaces. analysis of rock mass structures is a key to establish geological models and numerical simulation and a foundation to assess the stability of rock slopes. the weak structure surfaces are mainly bedding planes, faults, joints, schistosity plane and contact zones of intrusive bodies. since they are different in genesis and scale, the rock masses are different in features and mechanical intensities. based on the combination of rock structure bodies, 15 basic modes of deformation and failure of rock slope are systematically summarized. the deformation and failure of rock masses actually result from the recombination and rearrangement of these rock bodies. there are 11 types of rock mass structures and various deformation and failure of bank slopes are present in the reservoir area of the three gorge project

    巖體結構，特別是軟弱結構面對基巖斜坡變形與破壞具有顯著的控製作用，巖體結構模式分析是建立斜坡地質模型和數學模型的關鍵和評價斜坡穩定性的基礎。巖層層面斷裂構造節理裂隙片理與劈理以及侵入體和圍巖的接觸帶等是控制基巖斜坡穩定的軟弱結構面，這些成因不同大小不一的結構面將巖體分割成性質各異力學強度不均的各種巖體結構體，構成了15種基巖斜坡變形破壞的巖體結構基本模式。不同結構體的重新組合與排列是斜坡失穩的內在原因。
  2. The approximation analysis result of band dipole model is obtained on the basis of the theory of mfl. the electromagnetic distribution feature of the defect in the steel panel is studied by means of simulation. the leakage magnetic distribution of the two defects and four defects plural and the defects in the column differently in the width are also assayed. conclusions that factors affecting flaw magnetic leakage to the panel also affect the column and magnetic leakage bx should be the feature of the flaw identification to several flaws are drawn

    在對漏磁檢測原理進行詳細介紹的基礎上，得出了帶偶極子模型的近似解析解，並以有限元數值模擬分析為主要手段，以鋼板上缺陷為對象，分析了各因素對缺陷漏磁場產生影響的不同規律，同時模擬分析了板上平行的兩條裂紋，四條裂紋以及柱體上寬度不同時的裂紋的漏磁場分佈特徵，得出結論:影響板上缺陷漏磁場的諸因素會對柱體上缺陷漏磁場產生同樣的影響;對于多條裂紋，宜用漏磁分量bx作為缺陷識別的特徵量。
  3. Based on vc and opengl software platform, as a part of integrate planar mechanism analysis and simulation cai, the mechanism theory has been adopted to analysis the movement trace and profile of linkage ; adopt oriented object method to capsulate the class module. each corresponding class module complete parameter storage and process ; adopt message - map, message - trigger to organize the programming and response the user " s input ; use the document - view structure of the visual vc + + mfc class foundation as the basis of the programming architecture to complete those functions. use oriented object method to product the following class module : control class, render class, document class, mechanism class and other classes ; adopt opengl library to draw the three dimensional graph based on the result of mechanism analysis ; use model transforming, lighting, material, color, frame - buffer, display - list, graphics - component combine etc to draw the three - dimension mechanism and make the simulation of linkage has high reality

    本文敘述了平面連桿機構運動分析和可視化模擬的理論演算法及其編程實現方法，基於微機vc平臺，採用opengl圖形庫編程，利用面向對象的方法對機構進行功能封裝，利用vc + +的文檔視結構作為最基本的窗架，生成並控制三維繪制類、文檔類、主窗口類和一些輔助類，利用windows平臺的消息映射、事件驅動來組織程序運行和響應用戶反饋，利用機構分析得出坐標數據驅動opengl庫繪制三維機構圖形。
  4. Based on the fromer study of mine tectonic, hydrology, tunnel deformation, etc., 3 - d numerical simulation of current tectonic stress field of lvjiatuo coal mine was done in this thesis, combining with local hypocenter mechanism solve and relational stress in - situ measuring value regression analysis has been done to the simulation result, and the reasonable results are gained those will offer dependence for disposing the tunnels more rational and making tunnel supporting more economical and safer

    摘要本文在前人對呂家坨礦進行礦井構造、水文地質、巷道變形等研究的基礎上，結合該地區的震源機制解及有關的應力實測值，對礦區現今構造應力場進行了三維數值模擬，並對模擬結果進行了線性回歸分析，得到了與現實較為符合的結論，為更合理的巷道布置和更經濟而安全的巷道支護提供依據。
  5. In order to insure the correctness of analysis of miler theorem, i use simulation to verify and simulative result shows the analysis is correct

    為了確保用密勒定理分析電路的正確性，還用模擬來驗證，模擬結果表明了分析的正確性。
  6. The program is applied to 1st phase project of dayao bay bulk terminals, dalian port and the result is satis factory. finally, the article discusses the problem in research and brings some advices in further research. based on systems analysis, modem computer simulation technology and technological analysis of large. sized bulk terminals, the article proposes the appliance of ooa to the research of bulk handling system and raises a concept of simulation system

    本論文針對散糧碼頭系統設計與運營中出現的問題，根據系統分析的方法，結合現代計算機模擬技術，在對大型散糧裝卸碼頭工藝系統分析的基礎上，提出了應用面向對象的系統分析方法開展對散糧碼頭裝卸工藝系統進行分析研究，並建立模擬系統的概念。
  7. An idea, simulating the fuzzy model by establishing the fuzzy model and fuzzy control rule of the controlled object is proposed. generally, it is difficult to acquire the accurate mathematical description of the controlled object. a dynamic modulating factor is introduced in the designing of the fuzzy controller so as to improve the precision of the fuzzy control. and a more convenient defuzzify calculation method is adopted. the cart and the single inverted pendulum are taken so as to illustrate the simulation result. in addition, the detailed qualitative analysis of the fuzzy system is achieved. a kind of common method of qualitative analysis is proposed. it can be used to analyse the fuzzy system and describe the behavior of the system state precisely in the phase plane. the simulating results illustrated the method is feasible and available

    提出了在難以精確描述控制對象數學模型的情況下，通過建立控制對象的模糊模型來確定系統的模糊控制規則，並對模糊系統進行模擬分析的思想.利用連續系統定性分析的思想，提出一種對模糊系統進行定性分析的可行方法，在相平面內較為準確地刻畫模糊系統的動態行為.在模糊控制器的設計中，引入動態調節因子來提高模糊控制的精度，並採用了一種便於實際運算操作的解模糊運算方法.在一種簡單的控制對象情況下進行了具體的模擬計算，得到較理想的控制效果.此外對具有精確數學模型的一級倒立擺系統進行此種模糊控制，亦取得很好的模擬結果
  8. In order to avoid spectrum error due to energy leakage, the thesis research on identification of parameters of two close frequency components in discrete spectrum analysis, and simulation result shows the validity of the method

    針對由於能量泄漏造成的頻譜誤差，深入研究了密集頻譜的頻域參數識別法，從理論上加以推導，並通過模擬證明了該方法的有效性，可以識別1個頻率解析度以內的兩臨近頻率分量。
  9. The nonlinear controller is gained 2 ) the analysis of 4ws system by nonlinear dynamics combined the nonlinear tyre model with a driver model, a nonlinear 4ws model is put forward. its stability is analyzed and the result is verified by simulation

    （ 2 ）用現代非線性動力學理論，結合非線性輪胎側偏公式與司機模型，建立了4ws的非線性模型，研究了其穩定性，並進行了數值模擬。
  10. 3 ) based on the analysis result of equal contact stress curve and the theory of elasto - hydrodynamic lubrication, the expression of the oil film thickness between roller ( or ball ) and orbit are calculated. the simulation result proved that the thickness of oil film is enough for bearing and lubricating

    （ 3 ）基於等接觸應力曲線的求解結果和彈性流體動力潤滑理論，求得滾動體和軌道曲線間的油膜厚度表達式，並通過模擬分析論證了馬達正常工作時這種油膜能滿足承載能力和潤滑的需要。
  11. The mesoproterozoic mafic dyke swarms are extensively distributed in the central north china craton, which are not deformed and metamorphic, emplacing the pre - existed fractures, so the dyke swarms become the conspicuous marks to reconstruct the mesoproterozoic tectonic stress field of the central ncc. the mafic dykes in the northern block are transtensional while the dykes in the central and southern blocks are extensional. the mesoproterozoic tectonic stress field could be simulated on the analysis of the distribution and mechanical origin of the mesoproterozoic mafic dyke swarms in the central ncc. the simulation result shows that the mafic dyke swarms were formed in the extensional tectonic setting in the ncc in the mesoproterozoic time, which are related to the extension of the mesoproterozoic yanliao - zhongtiao aulacogens cross the central ncc

    克拉通北部地塊的鎂鐵質巖墻群為張剪性，而中部和南部地塊為張性。根據華北克拉通中部中元古代鎂鐵質巖墻群的分佈和成因機制分析，來恢復模擬中元古代的構造應力場。數值模擬結果表明鎂鐵質巖墻群在中元古代形成於伸展的大地構造背景，與橫穿華北克拉通中部的燕遼-中條拗拉槽系的伸展作用有一定的聯系。
  12. It directly affects the engine ' s working reliability whether it ' s good or not. according to the past method, piston can only be decided whether it meets the need of engineering in test after it has been turn out. this paper simulates the real working condition of piston by combining the ked method and fe - contact analysis way. it reflects deforming rule of piston, and makes it possible that the structure problem of piston skirt can only be found during the design period, so the cost of developing new product is lowered and the time is shorted. this paper proves that the thought is practical and the result of simulation to piston lr4100 is in accord with practice

    活塞裙部形線是活塞的關鍵結構之一，它的好壞直接影響發動機工作可靠性，以往的判定方法只有在活塞加工完成後，才能通過實驗方法判定設計，能否滿足工程實際的需要，本文通過ked方法與有限元接觸方法的結合，模擬實際活塞工作情況，較為準確的反映出，活塞裙部的變形規律，在設計階段發現活塞裙部的設計結構問題，節省新產品開發成本，縮短開發周期。
  13. Attitude errors are given first, and then theoretical analysis, simulation result show 3 kinds of attitude errors ’ affection both on the doppler and the image. 5. motion compensations based on gps / ins / imu control system and pga self - focus arithmetic are analyzed

    5 .研究了以gps / ins / imu為基礎的平臺控制系統和以pga演算法為基礎的自聚焦兩種主要的運動補償方案，並根據載機運動狀態和多普勒頻率的關系，推導了一種基於瞬時運動狀態的運動方法，最後結合rd演算法加以補償。
  14. On the basis of the result studied, three categories flaws easily turning up in the common whorl attachment are assayed by way of simulation. the result of experimental measurement verify all the conclusion from fem numerical simulation analysis 。 based on the study of the rationale of the ac - mfl, it primarily simulation studied the common whorl attachment in our country. the experimentation results go along with the simulation analysis

    螺紋構件可以看作是柱體上緊挨的多條裂紋的組合，以上述內容為基礎，以ansys模擬軟體為手段對普通螺紋構件中極易出現的三種裂紋情況（螺桿接合部的缺陷，螺紋區的缺陷，螺紋尾部的缺陷）進行了建模模擬，得出了三種不同情況下磁場分佈特徵，實驗驗證了模擬分析的正確性。
  15. The theoretical analysis and result of simulation indicate that the two - phase modulation reduces the switching losses 50 % relative to the quasi - optimum and the space vector modulation and overmodulation can generate higher voltages with low total harmonic distortion

    分析表明二相調制方法相對于準優化方法減少開關損耗近30 ，空間矢量的調制與過調制可以大大的提高直流母線電壓的利用率。
  16. Making reference to the anqing changjiang river highway bridge construction and the construction control, firstly, this paper studies the philosophy of the cable - stayed bridge construction control simulation analysis systematically, and pays much attention to the theory of simulating the construction process : backward analysis and forward analysis. then on the basis of introducing the construction process of the anqing changjiang river highway bridge, analysis the construction course fully, and analysis comparatively the result of each girder segment construction simulation, and study the variation philosophy of the line style of large cable - stayed bridge during construction

    本文緊密結合安慶長江公路大橋的主梁施工及施工控制實踐，首先系統地分析了斜拉橋施工控制模擬計算的整體思路，並重點分析探討了斜拉橋施工過程計算的理論：理想倒退分析和實時前進分析，然後在介紹安慶長江公路大橋主橋施工過程的基礎上，全面地計算分析了全橋的施工過程，並且應用施工過程計算結果，對每一個梁段的施工模擬工況進行對比分析，研究了大跨度鋼斜拉橋在施工過程中的線形變化規律。
  17. Finally, application of adams in the simulation analysis of the electromagnet damping system is based on velocity feedback. the result of the simulation is indicated that : the vibration effect of low frequency and resonance peak is decreased with increment of damping ratio, and the high frequency performance is not affected

    最後採用adams對電磁阻尼隔振系統進行了振動模擬分析，模擬結果表明，合理設置阻尼比，能夠有效抑制諧振峰值，大幅度提高低頻隔振效果，並且對隔振平臺諧振頻率和高頻性能影響很小。
  18. Motion errors are given first, and then theoretical analysis, simulation result show affections caused by 3 kinds of typical motion errors both on the doppler and the image. last the phase error criterions are given. 4

    4 .研究了機載雙站sar中偏航、俯仰和橫滾三種姿態誤差對回波多普勒頻率和雷達成像的影響，並分析研究了天線指向誤差對回波幅度的影響，最後通過模擬實驗證明了研究的正確性。
  19. Then it discusses the influence of electric parameters on the heating effect bases on an analysis of the result of the numerical simulation

    在集膚效應作用下，電纜導體內部的有效過流面積減小，交流阻抗顯著加大，其發熱量也很大，井下電纜伴熱加熱技術就是利用這一原理來加熱原油的。
  20. The simulation of flow, heat transfer, combustion, species diffusion, and analysis of the result got pleased conclusion and provide important basis for the designing of the sncr system

    通過對流動、傳熱、燃燒和組分擴散進行數值模擬和分析，獲得了比較滿意的結果，為鍋爐進行sncr改造提供了參考依據。
分享友人
分享到 Line

分享到臉書